1-[1-(4-氯苯基)环丁基]-3-甲基丁胺席夫碱的合成、表征及晶体结构

采用减肥药盐酸西布曲明的中间体1-[1-(4-氯苯基)环丁基]-3-甲基丁胺分别与水杨醛、3,5-二氯水杨醛缩合,得到相应的席夫碱化合物2-[[1-[1-(4-氯苯基)环丁基]-3-甲基丁亚氨基]甲基]苯酚(1)和2,4-二氯-6-[[1-[1-(4-氯苯基)环丁基]-3-甲基丁亚氨基]甲基]苯酚(2).通过单晶X-射线衍射、红外光谱、核磁共振谱、元素分析等表征确定了两个席夫碱化合物的组成及结构.1是单斜晶体,空间群C2/c.2是三斜晶体,空间群P-1.化合物主要通过氢键或π-π相互作用形成超分子结构.两个席夫碱化合物具有相似的荧光性质,是潜在多功能蓝色荧光材料.     

(E)-6-氯-2-(4-三氟甲基苯乙烯基)-3-喹啉甲酸的合成及其环化（英文）

设计了以6-氯-2-氯甲基-3-喹啉甲酸乙酯(1)为起始化合物与4-三氟甲基苯甲醛(2)通过"一锅法"反应合成(E)-6-氯-2-(4-三氟甲基苯乙烯基)-3-喹啉甲酸(3),化合物3在PPA的作用下发生傅瑞德尔-克拉夫茨酰基化反应得到2-氯-10-三氟甲基-12H-苯并[4,5]卓酮并[1,2-b]喹啉-12-酮(4)。所合成的化合物3,4未见文献报道,其结构经红外光谱、核磁共振氢谱、核磁共振碳谱和高分辨质谱得以证实。     

2-[2-(4,6-二甲基)-嘧啶基]-4-苯基-1,2,4-噁二唑烷-3,5-二酮的合成

异氰酸苯醇和N-[2-(4,6-二甲基)-嘧啶基]-羟胺(5)反应生成1-[2-(4,6-二甲基)-嘧啶基]-1-羟基-3-苯基脲(6)。化合物(6)在三乙胺存在下和氯甲酸乙醇反应生成2-[2-(4,6-二甲基)-嘧啶基]-4-苯基-1,2,4-噁二唑烷-3,5-二酮(1)。     

1-氧代-1-磷杂-2, 6, 7-三氧杂双环[2.2.2]-4-含硫取代基辛烷 的合成

本文利用中间体1-氧代-1-磷杂2,6,7-三氧杂双环[2.2.2]-4-羟甲基辛烷(1)和1-氧代-1-磷杂-2,6,7-三氧杂双环[2.2.2]-4-氯甲酰基辛烷(3)分别与RSH或取代硫醇按步骤反应得到了相应的4-亚甲基硫醚(5a～f)、4-亚甲基亚砜(6a～f)、4-(氯代乙硫基)甲酰基(7)及4-(β-烷硫基)-α-硫代酯基(8a～i)的双环笼状磷酸酯新衍生物共22个。所有的化合物经元素分析、IR和^1HNMR得到了证实。     

2-[2-(4, 6-二甲基)-嘧啶基]-4-苯基-1, 2, 4-恶二唑烷-3, 5-二酮的合成

异氰酸苯酯和N-[2-(4, 6-二甲基)-嘧啶基]-羟胺(5)反应生成1-[2-(4, 6-二甲基)-嘧啶基]-1-羟基-3-苯基脲(6)。化合物(6)在三乙胺存在下和氯甲酸乙酯反应生成2-[2-(4, 6-二甲基)-嘧啶基]-4-苯基-1, 2, 4-恶二唑烷-3, 5-二酮(1)。     

2-氯-6-(三氯甲基)吡啶核磁共振谱的解析

我们在前文^[1]曾对ABC三自旋质子磁共振谱的标划归属提出了一个新的方法。在另一篇文章中^[2],用核磁共振谱鉴定了2-氯-6-(三氯甲基)吡啶的化学结构。本文则根据我们提出的新方法对2-氯-6-(三氯甲基)吡啶的核磁共振谱进行归属,并在此基础上计算了它的化学位移和偶合常数。因此,本文既是前文^[1]理论的一个验证,也是第一次得到2-氯-6-(三氯甲基)吡啶核磁共振的有关分子参数。     

四环素有关化合物的合成——Ⅳ.脱二甲胺地霉红合成中两种中间体4-甲基-8-甲氧基萘酚-[1]及1,8-二甲氧基-4-甲基萘甲酸-[2]的制备

本文报告脱二甲胺地霉红(Ⅰ)合成工作中两种有用中间体4-甲基-8-甲氧基萘酚-[1](Ⅵ)和1,8-二甲氧基-4-甲基萘甲酸-[2](Ⅶ)的合成以及其结构的证明。 4-甲基-8-甲氧基萘酚-[1](Ⅳ)可从两条途径合成:其一由8-甲氧基萘酚-[1](Ⅱ)经Gattermann醛合成及黄鸣龙改良Kishner-Wolff还原法而得。另一途径由2-氯-5-甲氧基苯甲酰氯(Ⅷ)经八步反应,首先获得4-甲基-5-氯-8-甲氧基四氢萘酮-[1](ⅩⅥ),其中每步反应都分离得到纯粹的产物。将ⅩⅥ经溴化,脱溴化氢及氢解反应便生成化合物(Ⅳ)。从这两途径所得的最后产物(Ⅳ)性质完全相同。 1,8-二甲氧基-4-甲基萘甲酸-[2](Ⅶ)乃由化合物Ⅳ引入溴原子,甲基化后,经金属-卤素的交换及羧基化而得。Ⅶ的结构证明如下;化合物(ⅩⅥ)经二溴化及脱溴化氢、甲基化后,生成1,8-二甲氧基-2-溴-4-甲基-5-氯萘(ⅩⅩ),另一方面,将Ⅵ氯化以期获得ⅩⅩ,却得到2,4-二氯-5-甲基-7-溴-8-甲氧基萘酚-[1](ⅩⅪ)。由于将ⅩⅩ氯化亦得到ⅩⅪ,化合物Ⅵ中溴的位置得到证明,因此Ⅶ的结构也予以肯定。     

啶虫脒杂质的合成与分析

为了解决部分啶虫脒原药轻微臭味的问题,对样品进行了HPLC分析,发现其中有四个主要的杂质。经过对杂质富集、分离、纯化,得到并合成了这四个杂质,1-(6-氯吡啶-3-基)-N-((6-氯吡啶-3-基)甲基)-N-甲基甲胺、N?-氰基-N-(6-((N?-氰基-N-甲基亚氨代乙酰胺基)甲基)吡啶-3-基)-N-甲基亚氨代乙酰胺、3-氯-1-醛基三环[2,2,1~(2,6)]庚烷、3-氯-1-氰基三环[2,2,1~(2,6)]庚烷,并分析杂质产生的途径和减少其产生的方法,为啶虫脒合成反应的控制和分析提供了支持。     

R-(—)-1-氯甲基-4-乙基-2,8,9-三氧杂-5-氮杂-1-硅杂三环[3,3,3,0~(1.5)]十一碳烷的晶体结构

杂氮硅三环是一类具有特殊生理活性的新型有机硅化合物,有关其合成及性质在近20年中已有大量报道。特别是当R为氯甲基时,该化合物的生理活性很高,用它制成的药膏已用来治疗脱发及伤口愈合。因此,1-氯甲基杂氮硅三环(Ⅰ)的分子结构引起了人们的关注,先后有人报道了(Ⅰ)及1-氯甲基-3,7-二甲基,1-氯甲基-3,7,10-三甲基     

N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)酰胺类新化合物的合成及生物活性

以N-吡啶基吡唑甲酸和2-氨基-3-甲基苯甲酸为起始原料,经由亲核加成、环化和酰化等多步反应合成了一系列结构新颖的N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)酰胺类化合物.测试了所合成化合物的杀虫及抑菌活性,结果表明,新化合物大多化合物在200 mg·L^-1浓度下对东方粘虫(Mythimna separataWalker)具有一定的杀虫活性,尤其是N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)乙酰胺(8a)和N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)-3-氯-2,2-二甲基丙酰胺(8e)致死率可达70%;部分化合物在50 mg·L^-1浓度下对油菜菌核病菌的抑菌活性相对较好(54.5%~63.6%),优于triadimefon和chlorantraniliprole;部分化合物如N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)-3,3-二甲基丁酰胺80和N-(2-(5-(3-溴-1-(3-氯吡啶-2-基)-1H-吡唑-5-基)-1,3,4-噁二唑-2-基)-4-氯-6-甲基苯基)-4-氟苯甲酰胺(8h)对苹果轮纹病菌具有中等抑菌活性.值得注意的是,化合物8e的杀粘虫活性和对油菜菌核病菌的抑菌活性都较为突出,可用作新农药创制研究的新型参考结构.     

Theoretical studies on structures and reactivities of organocuprate(I) and organocopper(III) species

Systematic evaluation of method and basis set on the structure and energetics of organocuprate(I) and organocopper(III) species has been carried out. Various structures of organocuprate(I) and organocuprate(III) complexes were optimized with the HF, MP2, and B3LYP methods, and compared with the structures determined by X-ray crystallography (i.e., Me(2)Cu(I)(-), (CF(3))(4)Cu(III)(-)). Both the MP2 and B3LYP methods reasonably reproduce the X-ray structures while the HF method does not. Using larger basis set and incorporating the relativistic effects for Cu afford the best results. In the studies on the energetics of a Libond;Cu cluster model (Me(2)CuLi. LiCl) and Me(3)Cu model with the MP2, MP3, MP4DQ, MP4SDQ, CCSD(T), and B3LYP methods, the B3LYP method gives energetics similar to those obtained with the CCSD(T) method with much less cost, and hence, is judged to be the best practical method. The studies have shown that B3LYP method with the basis set incorporating the relativistic effective core potentials for Cu and the 6-31G* basis set for the rest is the theoretical method that is the most cost-effective for the studies of the structure and energetics of organocuprate(I) and organocopper(III) species.     

茶叶中总黄酮含量测定方法的研究

茶叶中富含羟基苯甲酸类、肉桂酸类及原花色素等多酚类物质,这些物质都具有邻苯二羟基结构,碱性环境下与铝离子形成络合物,影响总黄酮的测定。本实验用亚硝酸钠-硝酸铝法和三氯化铝法测定茶叶总黄酮含量的结果作了比较。实验结果表明,亚硝酸钠-硝酸铝法的测定结果比三氯化铝法约高60mg/g,三氯化铝法在酸性环境下进行,酸度实验显示,适宜酸度为pH≥5.0。鞣酸干扰实验表明,平均误差为0.017mg,随着鞣酸量的增加,测得值无上升趋势。三氯化铝法的线性方程:y=0.000638 0.8623x,相关系数:r=0.9998;样品加标回收率为98.05%。因此,对含酚类较多的植物应采用三氯化铝法测定其总黄酮的含量。     

3'甲酰基苯并冠醚的合成

本文用邻香兰醛作为起始原料,经过脱甲基反应,而制得2,3-二羟基苯甲醛,然后,在DMF中分多甘醇二对甲苯磺酸脂和氢方钠(方法A)或多醉二醇二氯化物和碳酸钾(方法B)长时间加热反应,即合成了3'-甲酰锘苯并冠醚和3',3'-和3'6'-二甲酰基二苯并冠醚.     

Spectrophotometric determination of NO(2) in the working atmosphere

A method is described for determining NO(2) in workplace atmospheres, based on its reaction with bis(diethyldithiocarbamato)copper(II) in toluene. NO(2) is absorbed from an air sample by a toluene solution of Cu(dtc)(2) and the decrease in the initial absorbance at 437 nm is measured. The method has been compared with the Saltzman method. The interference of NO, Cl(2), O(3), SO(2) and other gases has been studied. The NO(2) concentration range of the method is 1-500 mg m (3).     

La(NO3)3和Pr(NO3)3对高岭石脱羟基动力学的影响

采用热重和微商热重(TG/DTA)综合热分析技术在不同升温速率下研究了掺入La(NO₃)₃和Pr(NO₃)₃的高岭石的热分解过程, 利用Coats-Redfern积分法和Achar微分法对热分析实验数据进行动力学计算, 得到了高岭石脱羟基反应过程中的控制机理函数、 活化能和指前因子等动力学参数; 分析了2种稀土掺入对高岭石脱羟基过程动力学参数的影响, 并用Ozawa法对活化能进行了验证. 结果表明, 未掺稀土和掺入Pr(NO₃)₃的高岭石的脱羟基反应过程均受化学反应模型F₃控制, 反应的活化能分别为307.94和282.86 kJ/mol, 指前因子lnA的值分别为47.8980和44.1718; 掺入La(NO₃)₃的高岭石脱羟基反应过程控制机理函数发生改变, 受化学反应模型F₂控制, 反应活化能为196.02 kJ/mol, 指前因子lnA的值为29.5551. 与未掺稀土的高岭石对比, 掺入Pr(NO₃)₃后活化能和指前因子略有降低; 而掺入La(NO₃)₃后则显著降低, 分别降低了36.34%和38.30%. 采用Ozawa法验证得到的活化能与Coats-Redfern积分法和Achar微分法结果一致.     

Kinetic analysis of thermogravimetric data obtained under linear temperature programming—a method based on calculations of the temperature integral by interpolation

A new technique, called interpolation method, with general application in the kinetic analysis of processes studied by thermogravimetry (TG) under linear temperature programming is developed. It is based on the linear relationship, with slope 1, between log g() and log I(γ, θ) for the appropriate kinetic function, where I(γ, θ) is the normalized temperature integral, θ the normalized temperature (θ=T/T₀) and γ a dimensionless activation energy (γ=E/RT₀). Values of log I(γ, θ) are calculated by linear interpolations in a pre-built table. This method can easily be programmed and implemented in a personal computer, where the results (kinetic parameters and quality of regressions for the kinetic functions considered) are typically obtained in a very short time. The method is validated by analyzing different simulated thermogravimetric curves and comparing the results with those determined with some classic methods taken from the literature. In addition, the results are compared with the values obtained by a similar method, also developed and explained in this paper, which involves the evaluation of all the values of the temperature integral by numerical integration, therefore, demanding a much larger calculation time. The interpolation method is found to be more accurate than other published methods, particularly in the case of thermogravimetric curves corresponding to processes with low activation energies. The results obtained are always similar to those determined by the integration method, which is taken as reference. Application of the technique to experimental data for various types of reactions shows that the results are in agreement with the published parameters and kinetic laws.     

Determination of (3)J((1)H3'-(31)P) couplings in a DNA oligomer with enhanced sensitivity employing a constant-time TOCSY difference experiment

A constant-time TOCSY difference experiment for the determination of (3)J((1)H3'-(31)P) coupling constants in non-isotope-labelled DNA oligonucleotides is presented. The method is tested on a DNA octamer and compared with the established constant-time NOESY difference method. Each (3)J((1)H3'-(31)P) coupling constant is determined from amplitude changes caused by phosphorous decoupling, which are observable on multiple cross-peaks, thus leading to a high accuracy of the value of the (3)J((1)H3'-(31)P) coupling constant. The new experiment delivers up to three times the sensitivity compared with previously reported methods.     

Molecular ionization energies and ground- and ionic-state properties using a non-Dyson electron propagator approach

An earlier proposed propagator method for the treatment of molecular ionization is tested in first applications. The method referred to as the non-Dyson third-order algebraic-diagrammatic construction [nD-ADC(3)] approximation for the electron propagator represents a computationally promising alternative to the existing Dyson ADC(3) method. The advantage of the nD-ADC(3) scheme is that the (N+/-1)-electronic parts of the one-particle Green's function are decoupled from each other and the corresponding equations can be solved separately. For a test of the method the nD-ADC(3) results for the vertical ionization transitions in C(2)H(4), CO, CS, F(2), H(2)CO, H(2)O, HF, N(2), and Ne are compared with available experimental and theoretical data including results of full configuration interaction (FCI) and coupled cluster computations. The mean error of the nD-ADC(3) ionization energies relative to the experimental and FCI results is about 0.2 eV. The nD-ADC(3) method, scaling as n(5) with the number of orbitals, requires the solution of a relatively simple Hermitian eigenvalue problem. The method renders access to ground-state properties such as dipole moments. Moreover, also one-electron properties of (N+/-1) electron states can now be studied as a consequence of a specific intermediate-state representation (ISR) formulation of the nD-ADC approach. Corresponding second-order ISR equations are presented.     

A magnetic route to measure the average oxidation state of mixed-valent manganese in manganese oxide octahedral molecular sieves (OMS)

A magnetic route has been applied for measurement of the average oxidation state (AOS) of mixed-valent manganese in manganese oxide octahedral molecular sieves (OMS). The method gives AOS measurement results in good agreement with titration methods. A maximum analysis deviation error of +/-7% is obtained from 10 sample measurements. The magnetic method is able to (1) confirm the presence of mixed-valent manganese and (2) evaluate AOS and the spin states of d electrons of both single oxidation state and mixed-valent state Mn in manganese oxides. In addition, the magnetic method may be extended to (1) determine AOS of Mn in manganese oxide OMS with dopant "diamagnetic" ions, such as reducible V5+ (3d0) ions, which is inappropriate for the titration method due to interference of redox reactions between these dopant ions and titration reagents, such as KMnO4, (2) evaluate the dopant "paramagnetic" ions that are present as clusters or in the OMS framework, and (3) determine AOS of other mixed-valent/single oxidation state ion systems, such as Mo3+(3d3)-Mo4+(3d2) systems and Fe3+ in FeCl3.     

A rapid and sensitive extractive spectrophotometric determination of palladium(II) in synthetic mixtures and hydrogenation catalysts using pyridoxal-4-phenyl-3-thiosemicarbazone.

A rapid and sensitive extractive spectrophotometric method has been developed for the determination of palladium(II) in synthetic mixtures and hydrogenation catalysts using pyridoxal-4-phenyl-3-thiosemicarbazone (PPT) as an analytical reagent. The reagent forms a red-color complex with the metal at pH 3.0, which is extracted into benzene. The absorbance is measured at 460 nm. The method adheres to Beer's law up to a concentration range of 0.4-6.4 microg cm(-3). The molar absorptivity and Sandell's sensitivity are 2.20 x 10(4) dm3 mol(-1) cm(-1) and 4.85 x 10(-3) microg cm(-2), respectively. The correlation coefficient of the Pd(II)-PPT complex is 0.99, which indicates an excellent linearity between two variables. The detection limit of this method is 0.05 microg cm(-3). The instability constant of the Pd(II)-PPT complex calculated from Edmond and Birnbaum's method is 2.90 x 10(-5) and that of Asmus' method is 2.80 x 10(-5) at room temperature. The concurrent repetition of the method is checked and the relative standard deviation (RSD) (n = 5) was derived as 1.84 percent. The present method was applied to the determination of palladium(II) in synthetic mixtures and hydrogenation catalysts. The results were compared by employing an atomic-absorption spectrometer.