纳米Cu2O催化二苯甲烷二氨基甲酸苯酯无溶剂热分解制备二苯甲烷二异氰酸酯

研究了无溶剂条件下纳米Cu₂O催化二苯甲烷二氨基甲酸苯酯(MDPC)热分解制备二苯甲烷二异氰酸酯(MDI),考察了纳米Cu₂O的制备条件与反应条件对MDPC热分解反应性能的影响.结果表明,水解法制备的纳米Cu₂O在Ar中于300℃焙烧2h,其催化性能最佳;最佳的反应条件为Cu₂O用量为原料总重的0.06%,反应温度220℃,反应压力0.6kPa,反应时间12min,此时MDPC转化率达到99.8%,MDI选择性86.2%.     

氧化锌催化二苯甲烷二氨基甲酸甲酯分解反应

 对氧化锌催化二苯甲烷二氨基甲酸甲酯(MDC)分解制二苯甲烷二异氰酸酯(MDI)反应进行了研究,考察了反应温度、反应时间、催化剂用量以及原料浓度等对反应的影响. 结果表明,适宜的反应条件为催化剂用量2.1%, MDC浓度3.5%, 反应温度260 ℃, 反应时间20～30 min, 此时MDC转化率为99.5%, MDI产率为40.0%, 碳化二亚胺改性二苯甲烷二异氰酸酯(C-MDI)的产率为49.7%. 进一步研究发现,15%的醋酸锌溶液经草酸铵沉淀(不陈化)后,在500 ℃下焙烧4 h得到六方相的氧化锌,晶体的平均粒径为100～200 nm, 以其为催化剂时MDC转化率为99.1%, MDI的产率为52.1%, 同时还得到27.7%的 C-MDI.     

二苯甲烷二氨基甲酸甲酯热分解制备二苯甲烷二异氰酸酯的表观动力学研究

在癸二酸二(2-乙基己基)酯溶剂中研究了二苯甲烷二氨基甲酸甲酯(MDC)的分解反应机理,建立了二苯甲烷二氨基甲酸甲酯的分解反应动力学模型。通过实验测定,并对不同温度下体系中各物质的浓度数据进行线性拟合得到反应速率方程。结果表明：MDC的热分解分为两个步骤,均为一级反应。两步反应的活化能分别为：138.82kJ/mol,167.78kJ/mol;指前因子分别为：1.51×1012min-1,5.33×1014min-1。     

4,4'-二苯甲烷二异氰酸酯的高效液相色谱分析

用甲醇做衍牛试剂,把4,4'-二苯甲烷二异氰酸酯(MDI)衍生成4,4'-二苯甲烷二氨基甲酸甲酯(MDC),通过高效液相色谱分析MDC的含量来计算MDI的含量.该方法可以将MDI与合成反应中其他化合物完全分离.在测定浓度范围内线性关系良好,方法简单快速,精密度与准确度高.方法既保护了MDI中活泼的异氰酸根,也不需使用运输和储存困难的MDI标准品,能很好地用于化学合成中该产物的分析.     

一步催化合成二苯甲烷二氨基甲酸甲酯

研究了以H4SiW12O40-ZrO2/SiO2为催化剂,碳酸二甲酯(DMC)、苯胺和甲醛溶液为原料,一步催化合成二苯甲烷二氨基甲酸甲酯(MDC)的反应,考察了反应时间、反应温度和H4SiW12O40负载量等反应条件对催化性能的影响.适宜的反应条件是:DMC/苯胺/甲醛摩尔比为20/1/0.05,H4SiW12O40负载量为10%,443 K下反应7 h后降温到373 K下反应4.5 h.在此优化条件下,MDC的收率为24.9%.     

Co-MCM-41催化氧化二苯甲烷制备二苯甲酮的反应条件

系统地研究了Co掺杂MCM-41用于液相催化氧化二苯甲烷的反应,并探讨了不同溶剂及溶剂用量、反应时间、反应温度、催化剂用量等对二苯甲烷氧化反应的影响;并得出较优的反应条件:m(二苯甲烷)∶m(催化剂)=10∶1;V(二苯甲烷)∶V(冰醋酸)=1∶10;温度为100℃,时间为10 h,二苯甲烷的转化率21%,二苯甲酮的选择性95.8%。     

超临界CO2中合成4,4′-二苯甲烷二氨基甲酸乙酯

二苯甲烷二异氰酸酯(MDI)是生产聚氨酯的重要原料之一,广泛应用于金属粘结剂、玻璃纤维、彩色涂料、聚氨酯弹性体纤维和各种合成革等领域.全世界对MDI的需求以每年8%的速度增长,我国对MDI的需求量已仅次于美国居第二位,并仍将以两位数持续高速增长,市场潜力巨大.目前,工业上生产MDI的工艺主要为液相光气法.     

4,4''''-二苯甲烷二胺与碳酸二甲酯合成4,4''''-二苯甲烷二氨基甲酸甲酯反应过程分析

对碳酸二甲酯(DMC)与4,4'-二苯甲烷二胺(MDA)合成4,4'-二苯甲烷二氨基甲酸甲酯(MDC)的反应过程进行了研究,采用质谱、元素分析、红外光谱以及核磁共振氢谱等手段,对反应中间产物和最终产物进行了分离、组成结构分析和确认.研究结果表明,该反应是一个经过中间产物的串联反应,主产物为MDC,中间产物结构为4-(4'-氨苯基)苯甲烷氨基甲酸甲酯.     

二苯甲烷二氨基甲酸酯的合成方法

综述了二苯甲烷二氨基甲酸酯的合成方法,讨论了合成二苯甲烷二氨基甲酸酯所涉及的甲基化试剂、催化剂。参考文献31篇。     

4,4′-二苯甲烷二胺与碳酸二甲酯合成4,4′-二苯甲烷二氨基甲酸甲酯反应过程分析

对碳酸二甲酯(DMC)与4,4′-二苯甲烷二胺(MDA)合成4,4′-二苯甲烷二氨基甲酸甲酯(MDC)的反应过程进行了研究,采用质谱、元素分析、红外光谱以及核磁共振氢谱等手段,对反应中间产物和最终产物进行了分离、组成结构分析和确认。研究结果表明,该反应是一个经过中间产物的串联反应,主产物为MDC,中间产物结构为4-(4′-氨苯基)苯甲烷氨基甲酸甲酯。     

Gels from a semifluorinated n-alkane in fluorinated solvents as a probe for intermolecular interactions

Diblock semifluorinated n-alkanes can form aggregates and gels in fluorinated solvents. We have investigated the thermal behavior of binary mixtures comprising F(CF₂)₈(CH₂)₁₆H and fluorinated solvents. The solvents were perfluorohexane, perfluoroheptane, perfluorooctane, perfluorooctyl bromide, perfluorodecalin, and perfluorotributylamine. The phase diagrams were used to calculate the activity coefficients of the two components and the main excess thermodynamic functions. The solubility and self-assembly behavior of F₈H₁₆ in the fluorinated solvents are related to the different solute–solvent dispersion interactions that depend on the polarizabilities and ionization potentials of the interacting species, and on the structural properties of the solvent.     

PMDA-BPDA-HAB聚苯并噁唑的合成及耐热性

PMDA-BPDA-HAB聚苯并噁唑的合成及耐热性;均苯四甲酸二酐;联苯四羧酸二酐;二羟基联苯胺;聚酰亚胺;聚苯并噁唑;耐热性     

HCOO在Cu(110)、Ag(110)和Au(110)表面的吸附

采用密度泛函理论(DFT)以及广义梯度近似方法(GGA)计算了甲酸根(HCOO)在Cu(110)、Ag(110)和Au(110)表面的吸附. 计算结果表明, 短桥位是最稳定的吸附位置, 计算的几何参数与以前的实验和计算结果吻合. 吸附热顺序为Cu(110)(-116 kJ·mol-1)>Ag(110)(-57 kJ·mol-1)>Au(110)(-27 kJ·mol-1), 与实验上甲酸根的分解温度相一致. 电子态密度分析表明, 吸附热顺序可以用吸附分子与金属d-带之间的Pauli 排斥来关联, 即排斥作用越大, 吸附越弱. 另外还从计算的吸附热数据以及实验上HCOO的分解温度估算了反应CO2+1/2H2→HCOO的活化能, 其大小顺序为Au(110)>Ag(110)>Cu(110).     

Transition metal complexes of the tripodal ligand 4-(2′-pyridylmethyl)-4-azaheptane-1,7-diamine. Crystal structures of [CuLCl]ClO4 and [NiL(MeCN)2](ClO4)2

The tripodal ligand 4-(2′-pyridylmthyl)-4-azaheptane-1,7-diamine has been prepared by reaction of 2-aminemethyl pyridine with acrylonitrile, followed by the reduction of the nitrile groups. Copper(II), nickel(II), zinc(II), cobalt(III) and chromium(III) complexes of the ligand have been prepared and characterized and the crystal structures of the complexes [CuLCl]ClO₄ and [NiL(MeCN)₂](ClO₄)₂ determined. The copper complex is five coordinate with approximate square pyramidal stereochemistry with the apical position occupied by a primary amine donor. The nickel complex is octahedral with the pyridine nitrogen donor lying trans to an acetonitrile ligand.     

SYNTHESIS AND CHARACTERIZATION OF METAL COMPLEXES WITH AMPICILLIN

Abstract

The reaction, in water, of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) ions with sodium ampicillinate at room temperature has allowed isolation of dimers with the following general formula [M(amp)Cl]₂ × nH₂O (n = 1.5?3.2). The complexes were characterized by elemental analyses, conductivity measurements, magnetic susceptibilities and spectroscopic methods (IR, Raman, EPR and UV-Visible). A dinuclear structure based on octahedrally coordinated metal ions is proposed.     

Magnetism of metal-nitroxide compounds involving bis-chelating imidazole and benzimidazole substituted nitronyl nitroxide free radicals

Coordination compounds based on imidazole and benzimidazole substituted nitronyl nitroxide radicals with transition metal ions and trivalent lanthanide ions are described from the perspective of their magnetic properties.For the transition metal compounds the crystal structures show various metal-nitroxide dimensionalities including mononuclear (0D), one-dimensional (1D) and two-dimensional (2D) complexes. The mononuclear complexes were isolated with most metal ions of the first transition series. One copper(II) complex shows a copper(II)-radical ferromagnetic coupling (J = +75 cm⁻¹) while for the other mononuclear compounds, mainly with manganese(II), the metal-radical interactions are antiferromagnetic. The one-dimensional and two-dimensional complexes are manganese(II) compounds which show canting effects leading to weak ferromagnetism.For the trivalent lanthanide ions [La(III), Gd(III) and Eu(III)], three series of mononuclear complexes were obtained in which the metal center is bound to four, two or one nitroxide radicals depending on the counter ions and ancillary ligands. Unexpectedly, in most gadolinium(III) complexes, the Gd(III)-radical interactions were found to be antiferromagnetic in contradiction with other foundings and previous theoretical models. In support to the magnetic studies, the optical properties of the lantanide complexes have also been investigated and are briefly described.     

New Complexes of Ditopic Ligands with “d” and/or “s” Metal Ions

Abstract

The asymmetric compartmental macrocycles containing one N₂O₂ or N₃O₂ Schiff base and one O₂O₃ or O₂O₄ crown-ether like chamber, have been obtained by condensation reaction of the formyl precursors 3,3′-(3-oxapentane-1, 5-diyldioxy) bis (2-hydroxybenzaldehyde) or 3,3′-(3,6-dioxaoctane-1,8-diyldioxy)-bis(2-hydroxybenzaldehyde) with ethyl ethylenediamine (H₂L_A, H₂L_C), 1,5-diamino-3-azamethylpentane(H₂L_B, H₂L_D), also in the presence of metal ions as templating agents. These ditopic ligands, with dissimilar coordination sites, have been designed and used for the selective complexation of “d” and/or “s” metal ions, respectively into the Schiff base and the crown ether chamber. The selectivity of these processes strongly depends on the size and on the donor atom sets of the sites. The possibility to obtain mononuclear M(L)·nH₂O (M = Ni²⁺, Cu²⁺, Co²⁺), Mn(L)(CH₃COO)·nH₂O or Na(L) and hetero-dinuclear MNa(L)(CH₃COO) (M = Ni²⁺, Cu²⁺, Co²⁺) and MnNa(L)(CH₃COO)₂·nH₂O complexes has been successfully tested. The ligands and complexes have been characterized by ir, nmr, mass spectrometry and magnetic susceptibility measurements.

Two of the ligands used for the preparation of the solid samples, i.e., to H₂L_A and H₂L_B, have been employed to study complexation reactions of Co(II) and Na(I) in solution. In order to obtain information on the ligand preorganization effect toward the complex stabilities, a simpler open chain parent compound of H₂L_B (H₂L_E) has been also prepared and studied. FT-IR spectra show that H₂L_A is unable to complex Na⁺ in DMSO while the complexation reactions of Na⁺ by H₂L_B and of Co²⁺ by H₂L_A take place with slow kinetics. Therefore, thermodynamic data have been obtained only for the systems Co²⁺/H₂L_B and Co²⁺/H₂L_E. The thermodynamic parameters obtained for the complexation reactions show that the pre-organization of the donor atoms in H₂L_B does not add a significant contribution to the stabilities of the complexes. Both H₂L_B and H₂L_E form in DMSO 1:1, 1:2 and 1:3 = M:L complexes with very similar stabilities and almost equal enthalpies of formation. Physico-chemical studies suggest besides that the slow reaction of Na⁺ with H₂L_B is probably due to the formation of a 1:1 complex where the metal cation, initially occupying the O₃ cage of the ligand, slowly binds also the oxygens of the phenolic moieties. Spectral and calorimetric data on solutions containing H₂L_B and different Co²⁺: Na⁺ ratios evidence that in DMSO no stable heterodinuclear complexes form when the neutral ligand is considered.     

具有聚集诱导发光性质的近红外荧光染料

聚集诱导发光(AIE)现象的发现为解决传统有机荧光分子在高浓度和聚集形态下存在的荧光猝灭问题提供了最佳方案,并实现了在光电器件、化学传感、生物成像和靶向治疗等众多领域的广泛应用。随着对AIE发光机理研究的不断深入,AIE分子体系得到了极大的扩展。其中,一类具有给体-受体结构的AIE分子能够显著降低分子能隙,使发光分子波长从可见光区(400~700 nm)延伸到近红外(NIR)区(700~1700 nm)。由于NIR发光分子在生物医学领域中的独特优势,其已成为目前AIE研究的热点。随着对NIR分子设计及应用的不断探索,附加不同功能且发光波长更长的AIE分子也被开发出来了,并实现了对生物体特定组织的NIR荧光成像、光声成像、光动力治疗和光热治疗等。本文总结了近年来具有AIE性能的NIR荧光分子的结构及其在生物医学领域的相关应用。     

Simple,Selective, and Sensitive Spectrophotometric Method for Determination of Trace Amounts of Nickel（Ⅱ）, Copper （Ⅱ）, Cobalt （Ⅱ）, and Iron （Ⅲ） with a Novel Reagent 2-Pyridine Carboxaldehyde Isonicotinyl Hydrazone

A selective and sensitive reagent of 2-pyridine carboxaldehyde isonicotinyl hydrazone（2-PYAINH） was synthesized and studied for the spectrophotometric determination of nickel, copper, cobalt, and iron in detail. At a pH value of 7.0, 9,0, 9.0, and 8.0, respectively, which greatly increased the selectivity; nickel, copper, cobalt, and iron reacted with 2-PYAINH to form a 1：2 yellow-orange, 1：2 yellow-green, 1：2 yellow and 1：1 yellow complexes, with absorption peaks at 363, 352, 346, and 359 nm, respectively. Under the optimal conditions, Beer＇s law was obeyed over the ranges of 0.01-1.4, 0.01-1.5, 0.01-2.7, and 0.01-5.4 mg/L respectively. The apparent molar absorptivity and Sandell＇s sensitivities were 8.4×10^4, 5.2×10^4, 7.1×10^4, and 3.9×10^4 L·mol^-l·cm^-1, respectively, and 0.00069, 0.0012, 0.00078, and 0.0014 μg·cm2, respectively. The detection limits were found to be 0.001, 0.002, 0.003, and 0.01 mg/L, respectively. The detailed study of various interfering ions to make the method more sensitive was carried out and selective and several real samples were analyzed with satisfactory results.     

Spectrophotometric study of Cd(II), Pb(II), Hg(II) and Zn(II) complexes with 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin

The reaction of 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin (TCPP) with Cd(II), Pb(II), Hg(II) and Zn(II) was studied spectrophotometrically and kinetics, equilibrium constants as well as photodecomposition of complexes were determined. It was verified that these metal ions with large radius accelerate the incorporation reaction of zinc into TCPP. On the basis of the mechanism and kinetics of this reaction, a sensitive method for the spectrophotometric determination of trace amounts of Zn(II) has been developed. The molar absorptivity of examined Zn-TCPP complex and Sandell's sensitivity at 423 nm were 3.5×10⁵ M⁻¹ cm⁻¹ and 18.3 ng cm⁻². The detection limit for the recommended procedure was 1.4×10⁻⁹ M (0.9 ng ml⁻¹) and precision in range 20-100 ng ml⁻¹ not exceeds 2.7% RSD. The proposed method applied for zinc determination in natural waters and nutritional supplement was compared with AAS results and declared value.