镧改性铁催化剂的研究Ⅱ.镧改性铁催化剂的碳化性能

用穆斯堡尔谱和Ｃａｈｎ微量天平技术研究了Ｆｅ２Ｏ３／γ－Ａｌ２Ｏ３，Ｆｅ２Ｏ３－Ｌａ２Ｏ３／γ－Ａｌ２Ｏ３和Ｆｅ２Ｏ３／Ｌａ２Ｏ３／γ－Ａｌ２Ｏ３催化剂的碳化性能。结果表明：铁碳化物的生成与催化剂活性组分同载体的相互作用有关。Ｌａ２Ｏ３改性后的Ｆｅ２Ｏ３／Ｌａ２Ｏ３／γ－Ａｌ２Ｏ３催化剂，由于活性组分与载体之间存在强相互作用，在Ｆ－Ｔ反应过程中没有检测到铁碳化物相。同时，Ｌａ２Ｏ３的添加提高了催化     

镧改性铁催化剂的研究Ⅲ.镧改性铁催化剂的表面吸附性能

用ＸＰＳ，ＩＲ和Ｃａｈｎ微量天平技术研究了Ｆｅ２Ｏ３／γ－Ａｌ２Ｏ３，Ｆｅ２Ｏ３－Ｌａ２Ｏ３／γ－Ａｌ２Ｏ３和Ｆｅ２Ｏ３／Ｌａ２Ｏ３／γ－Ａｌ２Ｏ３催化剂的表面吸附性能。结果表明，部分镧履盖了催化剂表面，这部分镧优先堵盖ＣＯ的桥式吸附位，同时由于部分镧的覆盖，减少了ＣＯ和Ｈ２的化学吸附量，但大大促进了（ＣＯ＋Ｈ２）的共吸附，提高了催化剂的再吸附能力。     

负载型Fe_2O_3－La_2O_3－γ－Al_2O_3的XRD与MBS表征

对负载型Ｆｅ２Ｏ３－Ｌａ２Ｏ３－γ－Ａｌ２Ｏ３的ＸＲＤ、ＭＢＳ等方法的研究表明，Ｌａ２Ｏ３对γ－Ａｌ２Ｏ３的改性，提高了载体的热稳定性，增强了活性组份同载体的相互作用，提高了活性组份在载体表面的分散能力。     

负载型Fe2O3—La2O3—γ—Al2O3的XRD与MBS表征

对负载型Ｆｅ２Ｏ３－Ｌａ２Ｏ３－γ－Ａｌ２Ｏ３的ＸＲＤ，ＭＢＳ等方法的研究表明，Ｌａ２Ｏ３对γ－Ａｌ２Ｏ３的改性、提高了载体的热稳定性，增强了活性组份同载体的相互作用，提高了活性组份在载体表面的分散能力。     

CH4,CO2和O2制合成气反应中载体对Ni催化剂抗氧化性能的影响

在ＣＨ４、ＣＯ２ 催化氧化制合成气反应中, Ｎｉ／Ａｌ２Ｏ３ 催化剂在高温下生成ＮｉＡｌ２Ｏ４ 尖晶石,是导致催化剂失活的一个重要因素． 通过向载体（Ａｌ２Ｏ３）中添加各种氧化物, 使得催化剂的抗氧化性能得到改善． 并运用ＴＰＲ、ＸＲＤ对催化剂进行表征, 发现催化剂的抗氧化性顺序为： Ｎｉ／ＣａＯ－Ａｌ２Ｏ３ ＞ Ｎｉ／ＭｇＯ－Ａｌ２Ｏ３ ＞ Ｎｉ／ＣｅＯ２－Ａｌ２Ｏ３ ＞ Ｎｉ／Ｌａ２Ｏ３－Ａｌ２Ｏ３ ＞ Ｎｉ／Ｙ２Ｏ３－Ａｌ２Ｏ３ ＞ Ｎｉ／ＴｉＯ２－Ａｌ２Ｏ３＞ Ｎｉ／Ａｌ２Ｏ３＞ Ｎｉ／Ｆｅ２Ｏ３－Ａｌ２Ｏ３．     

氯化铯和氯化镧溶剂体系及四类新化合物的合成

研究了四元体系ＣｓＣｌ－ＬａＣｌ３－ＨＣｌ－Ｈ２Ｏ（２５℃、「ＨＣｌ」＝１３％（ｗｔ），２３％（ｗｔ）和ＣｓＣｌ－ＬａＣｌ３－ＨＡｃ－Ｈ２Ｏ（３０℃，「ＨＡｃ」＝４２％（ｗｔ））的平衡态的溶度数据，并给出制了相应的溶度图，共得到了ＣｓＣｌ．ＬａＣｌ３．４Ｈ２Ｏ、２ＣｓＣｌ．ＬａＣｌ３．２Ｈ２Ｏ和３ＣｓＣｌ．ＬａＣｌ３．３Ｈ２Ｏ３种化合物。对得到的新相进行了热分析，Ｘ射线粉末衍射及偏光性质的测定，依     

助催化剂对Fe1-xO基氨合成催化剂还原性能的影响

当助催化剂存在是地，Ｆｅ１－ｘＯ基催化剂的还原性能明显优于Ｆｅ３Ｏ４基催化剂，其原因是铝、钾、钙的氧化物对催化剂母体相Ｆｅ１－ｘＯ和Ｆｅ３Ｏ４还原性能的影响不同。由于Ａｌ＾３＋大量地进入Ｆｅ３Ｏ４的晶格而强烈地阻止Ｆｅ３Ｏ４的还原，只有少量的Ａｌ＾３＋能进入Ｆｅ１－ｘＯ晶格，因此对Ｆｅ１－ｘＯ的还原影响很小；     

制备镍催化剂时外加磁场对其结构和性能的影响

用浸渍法分别在３０Ｔ的恒稳磁场中和无磁场情况下，制备了ＮｉＯ／γ－Ａｌ２Ｏ３和ＮｉＯ／Ｌａ２Ｏ３／γ－Ａｌ２Ｏ３两类催化剂共４个样品，对它们的结构和性能进行测定和比较，发现磁场作用能加强金属－载体间的相互作用，使原峰温升高，引起Ｎｉ＾２＋向载体深层扩散，促进尖晶石ＮｉＡｌ２Ｏ４和钙钛石ＬａＮｉＯ３新相形成，同时可降低ＣＯ歧化活性，使催化剂上积炭量减少。     

制备高碳醇用Cu－Fe系催化剂的活性相

用共沉淀法制备了Ｃｕ－Ｆｅ系催化剂，它是由脂肪酸甲酯加氢制备高碳醇的新催化体系．催化剂经焙烧后的物相为ＣｕＯ，γ－Ｆｅ２Ｏ３和ＭｇＯ，形成了活性相的结构前驱．在反应条件下，ＣｕＯ首先被还原为金属态的Ｃｕ０，然后γ－Ｆｅ２Ｏ３被还原为Ｆｅ３Ｏ４；Ｃｕ０和Ｆｅ３Ｏ４共同参与催化该反应．本文用ＸＲＤ，ＴＧ－ＤＴＡ和Ｍｏｓｓｂａｕｅｒ谱等手段，结合催化剂的活性测定，确定了催化剂的活性相为Ｃｕ０和Ｆｅ３Ｏ４；ＭｇＯ可改变催化剂的电子结构和几何构型，起到重要的助催化作用     

Preparation and Crystal Structures of LaCl_3（12－crown－4）（MeOH）and［LaCl_3（phen）_2（H_2O）］·MeOH

Ｐｒｅｐａｒａｔｉｏｎ　ａｎｄ　Ｃｒｙｓｔａｌ　Ｓｔｒｕｃｔｕｒｅｓ　ｏｆ　ＬａＣｌ_３（１２－ｃｒｏｗｎ－４）（ＭｅＯＨ）ａｎｄ［ＬａＣｌ_３（ｐｈｅｎ）_２（Ｈ_２Ｏ）］·ＭｅＯＨＭａｏＪｉａｎｇ－Ｇａｏ（ＦｕｊｉａｎＩｎｓｔｉｔｕｔｅｏｆＲｅｓｅａ...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.