An oscillator using high order Lamb wave modes

An oscillator using high order Lamb wave modes is presented. Due to the multimode property of Lamb waves, high frequency oscillators using high order mode Lamb waves can be fabricated. To select the operating mode of the Lamb wave oscillator, a high order mode selector is inserted into the feedback loop. An oscillator using the 13th antisymmetric mode (a₁₃) in Lamb wave is achieved in experiments and the oscillating frequency is 5.30 times higher than that of the a₀ mode excited by the interdigital transducer.     

采用单个压电传感器的单模式兰姆波激发频率的选择

考虑了压电传感器(PZT)与板之间的耦合作用,从理论上研究了单个压电传感器激发时产生单模式兰姆波的频率调节方法,实验给出了模式选择在兰姆波结构健康监测中的应用. 在板材、板厚以及PZT尺寸一定的情况下,从理论上能够预测到作为频率函数的各兰姆波模式的幅值变化. 根据某特定兰姆波模式的幅值最大而其他模式幅值相对最小时所对应的频率,即可识别出该兰姆波模式优化的激发频率. 数值仿真验证了理论的有效性以及单模式兰姆波选择的可能性. 在不同的激发频率下,分别激发了优化的A0 模式,优化的S0模式以及共存的A0和S0模 关键词： 兰姆波 压电传感器 激发频率 结构健康监测     

铝板中Lamb波检测的实验研究

Lamb波在传播过程中具有频散及多模态特性,若相关参数选择不当,会导致在实际应用中信号相互叠加而无法识别。本文基于Lamb波的频散曲线是其频散方程实数解分布的特点,采用二分法绘制了铝板中Lamb波的频散曲线、波结构曲线和入射角曲线。根据曲线选择S0模态的Lamb波对1mm厚铝板中不同类型的缺陷进行检测。实验结果表明,S0模态的Lamb波对裂纹型缺陷和贯穿型缺陷十分敏感,但对于裂纹型缺陷,其幅值变化并不与缺陷大小成线性关系,并且S0模态Lamb波的声场指向性十分集中,在偏离声束轴线时无法检测到缺陷。     

台阶板中兰姆波A0模式传播特性的光弹研究

为了研究变壁厚结构中兰姆波的传播特性，以K9玻璃制成的台阶板为波导，运用动态光弹法实现了兰姆波在阶梯板中传播过程的可视化。使用MATLAB对兰姆波的理论应力分布进行了仿真，将仿真结果与光弹图像相对比以进行模式识别。此外，根据兰姆波的动态光弹图像计算了特定模式的相速度，并与相速度频散曲线相对比，以支持模式识别的结果。对4mm-3mm和4mm-2mm厚度差台阶板进行了对比分析。研究发现在激励目标模式的兰姆波时，可能会出现非目标模式，并且兰姆波的模态转换与频散程度与台阶处的厚度差有关。本文的结果可对具有相同性质类似结构材料的无损检测提供参考。     

Lamb wave sensors array for nonviscous liquid sensing

The interdigital transducer (IDT) can excite Lamb wave in a piezoelectric plate loading with a liquid layer, and the phase velocity of Lamb wave is associated with the properties of the liquid layer. In this paper, the concept of effective permittivity is introduced to study the Lamb wave’s potential application in liquid sensing. Considering the measuring of ideal nonviscous liquid, the sensors array is designed to sense the density and the dielectric constant of the liquid layer simultaneously. Using LiNbO₃ as piezoelectric material, in order to improve the sensors array sensitivity and the electro-mechanical coupling coefficient, the optimized results including plate thicknesses and cut orientations are presented by numerical simulation. These studies show that the Lamb wave sensors array can be potential in liquid sensing.     

Prolonged acousto-optic interaction with Lamb waves in crystalline plates

The propagation and acousto-optic interaction of Lamb modes in an anisotropic plate of tellurium dioxide (TeO2) are studied numerically and analytically. In the case of a Y-cut X-propagating TeO2 plate, the very high elastic anisotropy of the crystal greatly modifies the dispersion curves, giving rise to their multiple oscillations. The existence ranges of backward Lamb modes increase with the mode order contrary to the case of isotropic plates. The quasi-collinear light scattering by Lamb waves is considered. Owing to the structure of Lamb wave field, a simultaneous light diffraction at two different optical frequencies can take place while Lamb waves are excited only at the single frequency. It is demonstrated with the Z-cut (110)-propagating plate that a small change in the acoustic frequency can result in a significant shift in the frequency of the scattered light.     

Localization of notches with Lamb waves

A time-frequency representation (TFR) is used to analyze the interaction of a multimode and dispersive Lamb wave with a notch, and then serves as the basis for a correlation technique to locate the notch. The experimental procedure uses a laser source and a dual-probe laser interferometer to generate and detect Lamb waves in a notched plate. The high fidelity, broad-bandwidth, point-like and noncontact nature of laser ultrasonics are critical to the success of this study, making it possible to experimentally measure transient Lamb waves without any frequency biases. A specific TFR, the reassigned spectrogram, is used to resolve the dispersion curves of the individual modes of the plate, and then the slowness-frequency representation (SFR) of the plate is calculated from this reassigned spectrogram. By considering the notch to be an additional (second) source, the reflected and transmitted contributions of each Lamb mode are automatically identified using the SFRs. These results are then used to develop a quantitative understanding of the interaction of an incident Lamb wave with a notch, helping to identify mode conversion. Finally, two complementary, automated localization techniques are developed based on this understanding of scattering of Lamb waves.     

Lamb wave characteristics of thickness-graded piezoelectric IDT

An equivalent single layer model of Lamb wave generation by thickness-graded piezoelectric IDT on host structure is developed. Various additional complexities, such as the coupling between the Lamb wave modes, complicated nature of the electro-mechanical excitation are considered. The model of infinite IDT is extended to deal with the finite IDT with edge discontinuities. The effects of electromechanical coupling and thickness gradation on the wavelength shifts are investigated. The problem of electrically driven instability within the IDT is analyzed. Numerical results are reported by considering Al2O3/PZT IDT as integral part of the host structure, which show that there are significant changes and improvements in the Lamb wave characteristics due to the graded configuration. Most important among these is the reduced dispersiveness of the Lamb wave modes, which is useful in launching a SAW that propagates with narrower pulse width and less attenuation.     

基于频散补偿和分数阶微分的多模式兰姆波分离

由于兰姆波的多模和频散特性,实际检测时在同一激发频率下存在多种模式的混合信号,而各模式信号有不同的频散特性,使得在时频混叠的情况下兰姆波的检测变得十分复杂.本文在频散补偿的基础上,通过时延函数建模,依靠不同模式频散趋势的差异性,将时频混叠信号的分离问题转化为部分模式混叠信号的分离问题.基于分数阶微分的理论,用信号幅值谱分数阶微分极大值和对应频率分别与微分阶次拟合多项式实现特征参数的提取并依靠特征参数重建幅值谱.结合相位谱重构时域信号以实现部分混叠信号中频散补偿后的模式的分离.最后恢复频散获得分离后的兰姆波信号.仿真和实验结果表明,本文方法不仅可以实现时频混叠多模式兰姆波信号的分离,更能保证分离精度,有助于复杂多模式频散信号的分离与处理的进一步研究.     

基于层状模型的功能梯度板中兰姆波传播研究

功能梯度板中的兰姆波的传播在实际工程中有着非常广泛的应用。采用层状模型研究了兰姆波在材料特性沿厚度方向连续变化的功能梯度板中的传播特性。通过数值计算获得了层状板中兰姆波的色散关系,并与已有结果进行了比较,获得了材料属性沿厚度方向呈指数变化和多项式变化时功能梯度板中兰姆波的波速和位移解。当材料属性连续变化时,兰姆波各阶模态的波速与位移都将发生变化。相比于兰姆波的高阶模态,低阶模态的波速变化更加明显。本文的研究可为功能梯度板的设计提供参考。     

分层固体板中导波的激发与频散特性

针对无限大弹性分层固体板,研究了结构中导波的频散和激发特性。首先使用传递矩阵法推导分层板模型中导波的频散方程,然后用二分法求取导波各模式的频散曲线,进而分析结构中导波的频散特性。结果表明:在速度递增或递减的分层板中,基阶模式和高阶模式的高频极限分别等于低速层的瑞利波速和横波波速。对于含低速夹层的分层板,所有模式的高频极限都等于低速层的横波速度。在导波激发特性方面,研究了在具有一定宽度的法向力源作用下的分层板中导波各模式在结构中的法向位移谱。发现在速度递增的分层板结构中基阶模式是主导模式,而对于速度递减和含低速夹层模型,主导模式在不同的频段范围内对应不同的导波模式。      

Microcrack localization using a collinear Lamb wave frequency-mixing technique in a thin plate

A novel Lamb wave frequency-mixing technique is proposed for locating microcracks in a thin plate,which does not require the resonance condition of Lamb wave mixing and can accurately locate the microcracks through only one-time sensing.Based on the bilinear stress-strain constitutive model,a two-dimensional finite element(FE)model is built to investigate the frequency-mixing response induced by the interaction between two primary Lamb waves and a microcrack.When two primary Lamb waves of A0 and S0 modes with different frequencies excited on the same side of the plate simultaneously impinge on the examined microcrack,under the modulation of the contact acoustic nonlinearity,the microcrack itself can be deemed as the secondary sound source and it will radiate the Lamb waves of new combined frequencies.Based on the time of flight of the generated A0 mode at difference frequency,an indicator named normalized amplitude index(NAI)is defined to directly locate the multi-microcracks in the given plate.It is found that the number and location of the microcracks can be intuitively visualized by using the NAI based frequency-mixing technique.It is also demonstrated that the proposed frequency mixing technique is a promising approach for the microcrack localization.     

Visual characteristics of inhomogeneous acoustic waves

Experimentally obtained visualizations of propagating inhomogeneous acoustic waves driven by zero-order antisymmetric Lamb waves (flexural waves) in water are presented. The inhomogeneous waves are visualized by optical holographic interferometry. A series of photographs show the evolution in time of instantaneous acoustic pressure distributions associated with propagating inhomogeneous waves. The photographs reveal characteristic features of flexurally driven inhomogeneous waves such as transversely attenuated wavefronts oriented perpendicularly to the plate boundary and a phase propagation velocity along the boundary approximately equal to the plate wave velocity (250 meters/second). Effects due to the dispersive nature of the flexural plate waves are also noted in the photographic series. Features distinguishing these subsonic, inhomogeneous surface waves (also called trapped or evanescent waves) from the leaky, lateral or head wave and also from incompressible fluid motions associated with low frequency vibrations of fluid loaded plates are identified. The relevance of inhomogeneous acoustic waves driven by subsonic flexural waves to practical sound-structure interaction problems is discussed.     

General solution of cumulative second harmonic by Lamb wave propagation in a solid plate

A straightforward approach has been developed for the general solution of cumulative second harmonic by Lamb wave propagation in a solid plate. The present analyses of second-harmonic generation by Lamb waves focus on the cases where the phase velocity of the fundamental Lamb wave is exactly or approximately equal to that of the double frequency Lamb wave （DFLW）. Based on the general solution obtained, the numerical analyses show that the cumulative second-harmonic fields are associated with the position of excitation source and the difference between the phase velocity of the fundamental Lamb wave and that of the dominant DFLW component.     

套管中模式波的响应特征*

在固井质量评价中主要利用套管中模式波的幅度或衰减变化反映水泥的胶结状况,不同测井仪器在套管中激发的模式波的类型不同,研究套管中各模式波的传播特征和影响因素可充分挖掘测量数据的潜在应用价值。CBL和SBT等测井仪器在套管中主要激发拉伸波,类同于平板中的零阶对称Lamb波,水泥环封隔测井仪器的斜入射模式在套管中主要激发套管弯曲波,类同于平板中的零阶反对称Lamb波,垂直入射模式激发套管共振波,类同于平板中的高阶对称Lamb波。该文重点分析了这些模式波的衰减特征及其对微环的响应,套管弯曲波在套后耦合轻质水泥时对微环不敏感,但在套后耦合常规水泥或重水泥时,其衰减明显高于胶结良好的状况;拉伸波对微环的存在最为敏感;套管共振波对微环不敏感。     

Mode selection of Lamb waves for the evaluation of solid plates with liquid loading

This paper studies the mode selection of Lamb waves for evaluating solid plates with liquid loading. For this purpose, the Lamb wave selected should have the features such as zero normal displacement components at the plate surface in contact with liquid, small dispersion, and maximum group velocity. It is found that when the phase velocity of Lamb wave is equal to the longitudinal wave velocity of the plate material, its normal displacement at the plate surface is always zero. Through the numerical analyses, the specific S₂ Lamb wave that has zero normal displacement component at the plate surface, small dispersion and maximum group velocity compared with the other Lamb waves has been found. With respect to the specific S₂ Lamb wave, some experimental examinations have been carried out. It is found that the liquid loading on the plate surface has less influence on the specific S₂ Lamb wave signal but it can effectively eliminate the other signals. Moreover, the specific S₂ Lamb wave selected exhibits the capability of detecting multiple defects in the solid plate with the liquid loading. It can be concluded that the specific S₂ Lamb wave selected is suitable for the evaluation of solid plates with liquid loading.     

Reflection of Lamb waves obliquely incident on the free edge of a plate

The reflection of obliquely incident symmetric and anti-symmetric Lamb wave modes at the edge of a plate is studied. Both in-plane and Shear-Horizontal (SH) reflected wave modes are spawned by an obliquely incident in-plane Lamb wave mode. Energy reflection coefficients are calculated for the reflected wave modes as a function of frequency and angle of incidence. This is done by using the method of orthogonal mode decomposition and by enforcing traction free conditions at the plate edge using the method of collocation. A PZT sensor network, affixed to an Aluminum plate, is used to experimentally verify the predictions of the analysis. Experimental results provide support for the analytically determined results.     

The influence of backward wave transmission on quantitative ultrasonic evaluation using Lamb wave propagation

In view of the various novel quantitative ultrasonic evaluation techniques developed using Lamb wave propagation, the influence of an important related phenomenon, backward transmission, is investigated in this paper. Using the discrete layer theory and a multiple integral transform method, the surface displacement and velocity responses of isotropic plates and cross-ply laminated composite plates due to the Lamb waves excited by parabolic- and piston-type transmitting transducers are evaluated. Analytical expressions for the surface displacement and velocity frequency response functions are developed. Based on this a large volume of calculations is carried out. Through examining the characteristics of the surface displacement and velocity frequency response functions and, especially, the different propagation modes' contributions to them, the influence of the backward wave transmission related to quantitative ultrasonic nondestructive evaluation applications is discussed and some important conclusions are drawn.     

用于储罐底板缺陷检测的超声兰姆波模式研究

从超声兰姆波的声场方程出发,得到板材表面离面位移(法向位移)为零的条件,即当超声兰姆波的相速度等于板材介质的纵波声速时,在板材表面的离面位移为零。在给定适当频厚积的条件下,分别数值模拟了仅有切向位移而无离面位移的A1、S1、A2和S2兰姆波模式在有液体负载的单层钢板中的传播情形。结果表明:离面位移为零的S2模式频散较小且对板中缺陷更为敏感。     

Elastic constants of a plate from impact-echo resonance and Rayleigh wave velocity

A new method is proposed for calculating the dynamic elastic constants of an isotropic plate from measurements of the impact-echo resonance and Rayleigh wave velocity. Poisson's ratio is shown to be a single-valued function of the ratio between thickness frequency and Rayleigh wave velocity. This dependence is derived theoretically from the condition of resonance at the minimum frequency of the first-order symmetric Lamb mode. A finite element model is developed to determine how this frequency varies with Poisson's ratio. The results obtained by modal analysis and the power-spectral density technique are in good agreement with those calculated as the solution of the S1 Lamb mode equation. The method is verified by impact-echo tests on concrete and methacrylate plates. A laser interferometer is used to detect the vibration. Thickness frequencies are accurately identified by applying the multicross-spectral density to the signals detected at several points close to the impact point. In a separate experiment, Rayleigh waves are generated by the mediator technique. The wave velocities are determined from the arrival times of the surface wave at several points. Finally, the main sources of uncertainty are evaluated.