细胞色素c在2-巯基嘧啶衍生物修饰金电极上的直接电化学

用循环伏安法研究了2-巯基嘧啶(MP)、4-氨基-2-巯基嘧啶(AMP)及4,6-二氨基-2-巯基嘧啶(DAMP)自组装修饰金电极的制备及其对细胞色素c直接电子传递的促进作用。用扫描电子显微镜(SEM)表征了2-巯基嘧啶衍生物修饰金电极的表面形貌。细胞色素c在MP、AMP修饰金电极上能进行准可逆的电化学反应,氧化还原峰电位差(ΔEp)分别为61 mV和86 mV,氧化与还原峰电流比ipa/ipc接近1,峰电流与电位扫描速率平方根(v1/2)呈正比,是扩散控制的准可逆过程,异相电子迁移速率常数(Ks)分别为1.4×10-3cm·s-1和5.1×10-5cm·s-1。金电极在2.0 mmol·L-1MP、AMP溶液中分别浸泡3 h和9 h,促进效果较好。随2-巯基嘧啶环上取代氨基数的增加,对细胞色素c电化学反应的促进作用及电极的稳定性逐渐减弱,即MP>AMP,而DAMP基本无促进作用。     

聚乙烯醇微透镜阵列的制备及其固载细胞色素c的直接电化学

利用自组装法以聚苯乙烯有序多孔膜为膜板制备聚乙烯醇微透镜阵列膜.在pH6.89的磷酸盐(PBS)缓冲溶液中,固载在聚乙烯醇微透镜阵列膜修饰的玻碳电极上的细胞色素c于0.072V(vs·Ag/AgCl)处显示一对准可逆的氧化还原峰,是细胞色素c血红素辅基Fe(Ⅲ)/Fe(Ⅱ)电对的特征峰.考察了扫速、溶液pH及支持电解质浓度等因素对细胞色素c电子传递的影响,体系的表观异相电子传递速率常数k0为2.98×10-6cm·s-1.     

用微电极上的光谱电化学法测定催化反应的速率常数

首次采用微电极上的光谱电化学法测定了K_4Fe(CN)_6-抗坏血酸、K_4Fe(CN)_6-组氨酸体系的催化反应速率常数。实验发现, 当抗坏血酸或组氨酸的浓度同K_4Fe(CN)_6的浓度相当甚至稍低时, 仍可按准一级化学反应来处理, 并提出了合理的解释。     

细胞色素c与Fe(EDTA)~(2-)类络合物的氧化还原反应的快速动力学研究

采用截流法对细胞色素c与一系列Fe(EDTA)~(2-)类络合物间的氧化还原反应进行了研究。在拟一级条件下,测定了络合物浓度、反应温度、离子强度等条件对反应速率的影响。结果表明,氧化态细胞色素c(Cytc(Ⅲ))与Fe(EDTA)~(2-),Fe(CDTA)~(2-)和Fe(IDA)~(2-)间的反应符合典型的“外轨型”机理。而细胞色素c-Fe(NTA)~-体系则表现出不同的行为,具有速率饱和现象、较负的活化熵△S~≠(以及较低的细胞色素c的总电荷值和结合部位电荷计算值。基于这些结果,提出了“半内轨型”反应动力学模式。     

细胞色素c在微带金电极上的直接电化学

报道了一种新的促进剂4,6-二甲基-2-巯基嘧啶(DMMP)对细胞色素c(Cyt.c) 电化反应的促进作用,用红外光谱和光电子能对DMMP 在金电极表面形成的单分子膜进行了表征.循环伏安实验表明Cyt.c在DMMP修饰微电极上能发生准可逆的电化学反应,异相电子传递速率常数K~5为6.6×10^-^3cm/s,对DMMP修饰膜的稳定性进行了考察;讨论了Cyt.c发生电化学反应的异相电子传递速率常数K~5受电极, 表面促进剂的修饰量以及空气中氧影响的机理.     

膜电阻对自组装膜修饰电极电化学行为的影响

应用循环伏安和交流阻抗技术研究了 16烷基硫醇自组装膜修饰的金电极在Fe(CN) 63 - /Fe(CN) 64 - 溶液中的电化学行为 .无“针孔”缺陷的自组装膜对溶液与基底间的界面电子转移具有强烈的阻碍作用 ,当过电位较大时 ,In(I/ η)对 η1/2 之间具有良好的线性关系 .通过对Au/SAM /Hg模拟体系的电流———电压曲线进行测定 ,得到了自组装膜膜电阻的特征 .指出由于膜电阻的存在 ,自组装膜修饰电极在Fe(CN) 63 - /Fe(CN) 64 - 溶液中的行为实质上反映了膜自身的电阻特征     

(R)-/(S)-2-(5-氟尿嘧啶-1-基-乙酰基)氨基-3-羟基丙酸甲酯和DNA相互作用的电化学研究

以自组装制得的DNA修饰电极为工作电极,采用循环伏安法以Fe(CN)63-/4-为电活性指示剂,研究了抗癌药物R型和S型的2-(5-氟尿嘧啶-1-基-乙酰基)氨基-3-羟基丙酸甲酯(简称为(R)-5FUSer和(S)-5FUSer)与DNA的相互作用.循环伏安测试结果表明:(1)体系的式电位随(R)-5FUSer和(S...     

细胞色素c在咔唑修饰的金电极上的直接电化学

在生物体内,细胞色素c是一种电子载体,它能进行可逆的氧化还原反应,但在金属电极上的电化学反应却不可逆。1977年,Hill研究组发现,在4,4′-联吡啶存在时,细胞色素c在金电极上能进行准可逆的电化学反应。4,4′-联吡啶在细胞色素c电化学反应的过程中不起氧化还原反应而被称为促进剂。Hill等对50多种有机化合物的促进作用进行评价后提出,能加速细胞色素c电化学反应速率的促进剂分子至少应具有两个功能团。表面增强拉曼光     

二茂铁衍生物L-B膜在CdSe/Fe(CN)_6~((3-)/(4-))界面的中介催化作用

测定了CdSe薄膜电极及硬脂酸二茂铁酯L—B膜修饰后在Fe(CN)_6~(3-/4-)溶液中于白光和650nm单色光下的阻抗行为。用计算机非线性曲线拟合求出了等效电路中的元件参数值。进一步计算了CaSe薄膜电极光氧化还原反应速度常数。结果表明,修饰在CdSe薄膜电极上的硬脂酸二茂铁酯L—B膜在光诱发的CdSe/Fe(CN)_6~(3-/4-)界面电荷转移中加速电荷的传递起中介催化作用。     

Fe(CN)_6~(3-/4-)在金电极上氧化还原过程的拉曼光谱研究

用电化学现场表面增强拉曼散射光谱研究了Fe（CN）63-/4-在金电极表面的氧化还原过程及吸附行为．结果表明，Fe（CN）63-/4-相对于Fe（CN）63-/4-能更强烈地吸附在金电极表面上，并通过配体CN-的N端吸附在电极表面．     

自组装膜修饰悬汞电极的制备及电化学特性

电子跨膜传递一直是生物能学的中心问题 ,长期以来生物学家和化学家一直为能在分子水平上研究生物膜上电子传递过程的模型体系而不懈努力．提出的模型体系有平板双分子层膜（ｐｌａｎｎｅｒｂｉｌａｙｅｒｌｉｐｉｄｍｅｍｂｒａｎｅ,ＢＬＭ）［１］、泡囊［２］、和固体支撑双分子层膜（ｓｏｌｉｄｓｕｐｐｏｒｔｅｄｂｉｌａｙｅｒｌｉｐｉｄｍｅｍｂｒａｎｅ ,Ｓ ＢＬＭ）［３］等 ,ＢＬＭ膜与实际生物膜最为相似 ,但极不稳定 ;Ｓ ＢＬＭ膜稳定性好 ,但基底不平 ,缺陷大 ,研究电子跨膜传递困难．而８０年代初 ,自组装(Ｓｅｌｆ Ａｓｓｅ…     

溶胶-凝胶-HBsAb膜免疫传感器的研制与应用

采用溶胶-凝胶(Sol-gel)技术,成功地将乙肝表面抗体(HBsAb)包埋于Sol-gel中,再滴涂于铂盘电极表面,制成溶胶-凝胶-HBsAb膜非标记免疫传感器.根据抗原与抗体特异性结合形成的免疫复合物使敏感膜有效扩散截面积减小的特性,提出了利用铁氰化钾作为氧化还原探针间接检测乙肝表面抗原(HBsAg)的新方法.用循环伏安法(CV)对电极逐层修饰过程进行了表征,并探讨了对HBsAg定量检测的可行性及其响应机理.采用差示脉冲伏安法(DPV)检测人体血清中的HBsAg.线性范围5～320μg/L,线性相关系数r=0.997.该传感器响应迅速,灵敏度高,稳定性好.于4℃干态保存14d,其响应信号基本不变.将其用于108例临床血清检验,与酶联免疫吸附法(ELISA)的符合率为87.5％.     

Tuning of the critical temperature in iron(II) spin-crossover materials based on bridging polycyanidometallates: pentacyanidonitrosylferrate(II) and hexacyanidoplatinate(IV)

The reactions of iron(II) sulfate, 4-amino-3,5-di-2-pyridyl-4H-1,2,4-triazole (abpt), and pentacyanidonitrosylferrate(II) or hexacyanidoplatinate(IV) resulted in the formation of one-dimensional iron(II) spin-crossover compounds [Fe(abpt)(2)(μ-Fe(CN)(5)(NO))](n) (1) and [Fe(abpt)(2)(μ-Pt(CN)(6))](n) (2) with the spin-transition critical temperature near or above room temperature accompanied by thermochromism. Furthermore, it has been proven that the critical temperature T(c) is influenced by the type of dianionic polycyanidometallate within the series of discussed systems, and it changes in the sequence of [Fe(CN)(5)(NO)](2-) < [Pt(CN)(6))](2-) < [Ni(CN)(4))](2-) ≈ [Pd(CN)(4))](2-) ≈ [Pt(CN)(4))](2-).     

Interaction of 2- and 4-mercaptopyridine with pentacyanoferrates and gold nanoparticles

2-Mercapto- and 4-mercaptopyridine (2- and 4MPy) react with the [Fe(CN)(5)(H(2)O)](3-) complex, forming the S-coordinated [Fe(CN)(5)(2MPy)](3-) and the N-coordinated [Fe(CN)(5)(4MPy)](3-) complexes. The rates of formation and dissociation of the [Fe(II)(CN)(5)(2MPy)](3-) complex were determined as k(f) = 294 dm(3) mol(-1) s(-1) and k(d) = 0.019 s(-1) by means of stopped-flow technique. The equilibrium constants for the iron(II) and -(III) species were calculated as K(f)(II) = 1.5 x 10(4) mol(-1) dm(3) and K(f)(III) = 1.3 x 10(6) mol(-1) dm(3), in comparison with 2.6 x 10(5) and 3.4 x 10(4) mol(-1) dm(3), respectively, for the 4MPy isomer. In the presence of gold nanoparticles, both 2- and 4MPy can displace the stabilizing citrate species, leading to substantial aggregation in aqueous solution, as deduced from the surface-enhanced Raman spectroscopy effect and from the decay of the 520-nm plasmon band accompanied by the rise of the characteristic exciton band at 650 nm. The [Fe(CN)(5)(4MPy)](3-) complex promotes strong stabilization of the gold nanoparticles by interacting through the S atom. On the other hand, the labile [Fe(CN)(5)(2MPy)](3-) complex induces aggregation, delivering the 2MPy ligand to the gold nanoparticles.     

Spin-crossover behavior in cyanide-bridged iron(II)-gold(I) bimetallic 2D Hofmann-like metal-organic frameworks

The synthesis and characterization of new two-dimensional (2D) cyanide-bridged iron(II)-gold(I) bimetallic coordination polymers formulated, {Fe(3-Xpy)2[Au(CN)2]2} (py = pyridine; X = F (1), Cl (2), Br (3), and I (4)) and the clathrate derivative {Fe(3-Ipy)2[Au(CN)2]2}.1/2(3-Ipy) (5), are reported. The iron(II) ion lies in pseudoctahedral [FeN6] sites defined by four [Au(CN)2](-) bridging ligands and two 3-Xpy ligands occupying the equatorial and axial positions, respectively. Although only compounds 2 and 4 can be considered strictly isostructurals, all of the components of this family are made up of parallel stacks of corrugated {Fe[Au(CN)2]2}n grids. The grids are formed by edge sharing of {Fe4[Au(CN)2]4} pseudosquare moieties. The stacks are constituted of double layers sustained by short aurophilic contacts ranging from 3.016(2) to 3.1580(8) A. The Au...Au distances between consecutive double layers are in the range of 5.9562(9)-8.790(2) A. Compound 5, considered a clathrate derivative of 4, includes one-half of a 3-Ipy molecule per iron(II) atom between the double layers. Compound 1 undergoes a half-spin transition with critical temperatures Tc downward arrow = 140 K and Tc upward arrow = 145 K. The corresponding thermodynamic parameters derived from differential scanning calorimetry (DSC) are Delta H = 9.8 +/- 0.4 kJ mol(-1) and Delta S = 68.2 +/- 3 J K mol(-1). This spin transition is accompanied by a crystallographic phase transition from the monoclinic P2(1)/c space group to the triclinic P1 space group. At high temperatures, where 1 is 100% high-spin, there is only one crystallographically independent iron(II) site. In contrast, the low temperature structural analysis shows the occurrence of two crystallographically independent iron(II) sites with equal population, one high-spin and the other low-spin. Furthermore, 1 undergoes a complete two-step spin transition at pressures as high as 0.26 GPa. Compounds 2- 4 are high-spin iron(II) complexes according to their magnetic and [FeN6] structural characteristics. Compound 5, characterized for having two different iron(II) sites, displays a two-step spin transition with critical temperatures of Tc(1) = 155 K, Tc(2) downward arrow = 97 K, and Tc(2) upward arrow = 110 K. This change of spin state takes place in both sites simultaneously. All of these results are compared and discussed in the context of other {Fe(L) x [M(I)(CN)2]} coordination polymers, particularly those belonging to the homologous compounds {Fe(3-Xpy)2[Ag(CN)2]2} and their corresponding clathrate derivatives.     

Kinetics and mechanism of the interaction of nitric oxide with pentacyanoferrate(II). Formation and dissociation of [Fe(CN)5NO]3 -

The interaction of NO with [Fe(CN)(5)H(2)O](3)(-) (generated by aquation of the corresponding ammine complex) to produce [Fe(CN)(5)NO](3)(-) was studied by UV-vis spectrophotometry. The reaction product is the well characterized nitrosyl complex, described as a low-spin Fe(II) bound to the NO radical. The experiments were performed in the pH range 4-10, at different concentrations of NO, temperatures and pressures. The rate law was first-order in each of the reactants, with the specific complex-formation rate constant, k(f)( )()= 250 +/- 10 M(-)(1) s(-)(1) (25.4 degrees C, I = 0.1 M, pH 7.0), DeltaH(f)() = 70 +/- 1 kJ mol(-)(1), DeltaS(f)() = +34 +/- 4 J K(-)(1) mol(-)(1), and DeltaV(f)() = +17.4 +/- 0.3 cm(3) mol(-)(1). These values support a dissociative mechanism, with rate-controlling dissociation of coordinated water, and subsequent fast coordination of NO. The complex-formation process depends on pH, indicating that the initial product [Fe(CN)(5)NO](3)(-) is unstable, with a faster decomposition rate at lower pH. The decomposition process is associated with release of cyanide, further reaction of NO with [Fe(CN)(4)NO](2)(-), and formation of nitroprusside and other unknown products. The decomposition can be prevented by addition of free cyanide to the solutions, enabling a study of the dissociation process of NO from [Fe(CN)(5)NO](3)(-). Cyanide also acts as a scavenger for the [Fe(CN)(5)](3)(-) intermediate, giving [Fe(CN)(6)](4)(-) as a final product. From the first-order behavior, the dissociation rate constant was obtained as k(d) = (1.58 +/- 0.06) x 10(-)(5) s(-)(1) at 25.0 degrees C, I = 0.1 M, and pH 10.2. Activation parameters were found to be DeltaH(d)() = 106.4 +/- 0.8 kJ mol(-)(1), DeltaS(d)() = +20 +/- 2 J K(-)(1) mol(-)(1), and DeltaV(d)() = +7.1 +/- 0.2 cm(3) mol(-)(1), which are all in line with a dissociative mechanism. The low value of k(d) as compared to values for the release of other ligands L from [Fe(II)(CN)(5)L](n)()(-) suggests a moderate to strong sigma-pi interaction of NO with the iron(II) center. It is concluded that the release of NO from nitroprusside in biological media does not originate from [Fe(CN)(5)NO](3)(-) produced on reduction of nitroprusside but probably proceeds through the release of cyanide and further reactions of the [Fe(CN)(4)NO](2)(-) ion.     

Electrochemical response of dopamine at a penicillamine self-assembled gold electrode.

The penicillamine (Pen) self-assembled monolayer (SAM) modified gold electrode (Pen/Au) is demonstrated to catalyze the electrochemical response of dopamine (DA) by cyclic voltammetry. A pair of well-defined redox waves was obtained and the calculated standard rate constant (k(s)) is 3.88 x 10(-3) cm/s at the self-assembled electrode. The electrode reaction is a quasi-reversible process. The oxidation peak of DA can be used to determine the concentration of DA. The peak current and the concentration of DA are a linear relationship in the range of 2.0 x 10(-5) M to 8.0 x 10(-4) M. The detection limit is 4.0 x 10(-6) M. By ac impedance spectroscopy the apparent electron transfer rate constant (k(app)) of Fe(CN)(3-)/Fe(CN)(4-) at the Pen/Au electrode was obtained as 2.08 x 10(-5) cm/s. The Pen SAM was characterized with X-ray photoelectron spectroscopy (XPS), grazing angle FT-IR spectroscopy and contact angle goniometer.     

Electrocatalytic response of dopamine at a metallothioneins self-assembled gold electrode.

The metallothioneins (MT) self-assembled monolayer modified gold electrode (MT/Au) is demonstrated to catalyze the electrochemical response of dopamine (DA) by cyclic voltammetry. A pair of well-defined redox waves was obtained and the calculated standard rate constant (k(s)) is 6.97 x 10(-3) cm s(-1) (20 degrees C) at the self-assembled electrode. The electrode reaction is a quasi-reversible process. The oxidation peak of DA can be used to determine the concentration of DA. The peak current and the concentration of DA follow a linear relationship in the range of 2.0 x 10(-5) M to 8.0 x 10(-4) M. The detection limit is 6.0 x 10-6 M. By ac impedance spectroscopy, the apparent electron transfer rate constant (k(app)) of Fe(CN)6(3-)/Fe(CN)6(4-) at the MT/Au electrode was obtained as 2.0 x 10(-5) cm s(-1). The MT/Au was characterized with grazing angle FT-IR spectroscopy and contact angle goniometry.     

Cation-independent electron transfer between ferricyanide and ferrocyanide ions in aqueous solution

Electron transfer between Fe(CN)(6)(3-) and Fe(CN)(6)(4-) in homogeneous aqueous solution with K(+) as the counterion normally proceeds almost exclusively by a K(+)-catalyzed pathway, but this can be suppressed, and the direct Fe(CN)(6)(3)(-)-Fe(CN)(6)(4-) electron transfer path exposed, by complexing the K(+) with crypt-2.2.2 or 18-crown-6. Fe((13)CN)(6)(4-)-NMR line broadening measurements using either crypt-2.2.2 or (with extrapolation to zero uncomplexed [K(+)]) 18-crown-6 gave consistent values for the rate constant and activation volume (k(0) = (2.4 +/- 0.1) x 10(2) L mol(-1) s(-1) and Delta V(0) = -11.3 +/- 0.3 cm(3) mol(-1), respectively, at 25 degrees C and ionic strength I = 0.2 mol L(-1)) for the uncatalyzed electron transfer path. These values conform well to predictions based on Marcus theory. When [K(+)] was controlled with 18-crown-6, the observed rate constant k(ex) was a linear function of uncomplexed [K(+)], giving k(K) = (4.3 +/- 0.1) x 10(4) L(2) mol(-2) s(-1) at 25 degrees C and I = 0.26 mol L(-1) for the K(+)-catalyzed pathway. When no complexing agent was present, k(ex) was roughly proportional to [K(+)](total), but the corresponding rate constant k(K)' (=k(ex)/[K(+)](total)) was about 60% larger than k(K), evidently because ion pairing by hydrated K(+) lowered the anion-anion repulsions. Ionic strength as such had only a small effect on k(0), k(K), and k(K)'. The rate constants commonly cited in the literature for the Fe(CN)(6)(3-/4-) self-exchange reaction are in fact k(K)'[K(+)](total) values for typical experimental [K(+)](total) levels.     

Fe-Zn双金属氰化物催化环氧丙烷开环聚合的研究

用Fe Zn双金属氰化物 (DMC)催化剂合成了数均分子量 30 0 0～ 12 0 0 0的聚氧化丙烯二元醇 .着重考察了聚合反应的温度、加料方式等对聚合物分子量及分布的影响 ,并初步探讨了Fe Zn双金属氰化物催化环氧丙烷开环聚合的反应特征 .实验发现 ,采用Fe ZnDMC催化剂 ,聚合物分子量可控 ;在较高温度下聚合所得的聚合物分子量分布呈双峰形 ,显示反应体系中至少存在两类活性中心 ,这可能与催化剂中存在两种价态的络合物有关 ,当降低聚合温度时 ,聚合物分子量分布呈单峰形 ,可能是一类活性中心没有引发 ;实验中还发现单体分批加料时聚合物分子量分布较窄 ,而一步加料法所得聚合物分子量分布则很宽