光电子寿命与介电常数的关系及其对光催化效果的影响

通过理论推导给出了描述光催化剂导带上光电子寿命与光催化剂介电常数关系的方程。根据该方程和光催化剂的催化机理,通过理论分析我们发现,光催化剂的催化效果与光催化剂的介电常数之间满足如下关系:光催化剂的介电常数越大,光催化剂导带上的光电子寿命就越长,光催化剂导带上的光电子越不容易通过受激辐射和自发辐射跃迁回到价带与价带上的空穴复合,提供给空穴氧化光催化剂表面的氢氧根离子和水分子形成羟基自由基的时间就越长,越有利于光催化反应的进行。     

超临界水热极速合成异质结构H4SiW12O40/Bi2WO6光催化剂及其脱氮性能

采用超临界水热合成方式极速合成一种H_4SiW_(12)O_(40)/Bi_2WO_6光催化剂,通过X射线衍射(XRD)、场发射扫描电子显微镜(SEM)、透射电子显微镜(TEM)、比表面积及孔隙度(BET)测定对所合成催化剂的结构和性质进行了考察,并以吡啶含量为15 mg/g的模拟油对光催化剂的脱氮效果进行评价。结果表明,该光催化剂为二维纳米片自组装成的三维球状结构,其中,H_4SiW_(12)O_(40)与Bi_2WO_6不是简单的固载关系而是在超临界水热条件下生成一种新的晶相,正是由于这种晶相的存在,使得H_4SiW_(12)O_(40)牢固固载在Bi_2WO_6光催化剂本体上的同时,对光生载流子进行了有效疏导,提升了H_4SiW_(12)O_(40)/Bi_2WO_6光催化剂的使用寿命和光催化活性。本研究针对光催化剂制备周期与晶形发育的矛盾,将超临界水热技术与光催化剂模板导向合成技术有机结合,在获得良好晶形异质结构H_4SiW_(12)O_(40)/Bi_2WO_6光催化剂的同时明显缩短了光催化剂的制备周期,从而降低了催化剂的制备成本,攻克了光催化剂工业化应用的主要矛盾,所制备的H_4SiW_(12)O_(40)/Bi_2WO_6光催化剂轻质油脱氮效率达97%以上。     

卤素原子对卤氧化铋(BiOX,X=Cl、Br、I)光催化性能的影响

利用水热法和溶剂热法制备了BiOCl、BiOBr和BiOI三种光催化剂,通过XRD、SEM、光电流密度与UV-vis DRS表征了光催化剂的晶体结构、表面形貌与光电性能,DFT计算结果表明,随着卤素原子序数升高,光催化剂导带附近的费米能级的分散度降低,禁带宽度变小.在可见光照射下,通过水溶液中罗丹明B的降解效果来评价光...     

高分散TiO_2/SBA-15的制备及光催化性能

提出了一种制备高分散TiO2/SBA-15光催化剂的新方法.以钛酸四正丁酯(TB)和羧基改性的SBA-15(COOH/SBA-15)为原料,利用COOH/SBA-15表面上高分散的羧基与TB的配合作用将TB锚定,经过溶剂热及焙烧处理制得TiO2/SBA-15光催化剂.采用粉末X射线衍射(XRD),N2吸脱附,傅里叶变换红外光谱(FT-IR),透射电镜(TEM)等对所得催化剂进行了表征.结果表明:所得TiO2/SBA-15光催化剂为高结晶度的锐钛矿晶型,TiO2均匀地分散在SBA-15表面,TiO2/SBA-15光催化剂保持较好的介孔特征结构,具有较大比表面积.以降解罗丹明B(RhB)为探针反应,考察了所得TiO2/SBA-15光催化剂的光催化性能.与后处理浸渍法制备的光催化剂相比,本文制备的TiO2/SBA-15光催化剂表现出了更加优越的光催化性能.     

MOFs基材料在光催化CO2还原中的应用

系统总结了金属有机框架(MOFs)基材料在光催化还原CO₂中的最新研究进展, 其中包括MOFs直接作为光催化剂和作为复合光催化2个主要部分, 讨论了MOFs基光催化剂在催化还原CO₂方面展现出的独特优势, 并对MOFs基光催化剂的结构稳定性与CO₂转化效率等问题进行讨论与分析, 对未来发展趋势进行了展望.     

仿生模拟催化在新能源与CO2光催化还原方面的研究及应用

人工光合成是受到植物光合作用启发而兴起的前沿科研领域,对于新型能源的探索具有重要的研究价值。本文首先从植物光合作用的原理和关键化学过程出发,介绍了人工光合成体系的构建原则与方法,着重阐述了过渡金属配合物光催化剂在人工光合成各半反应(水的光催化氧化分解与CO2的还原转换)中的应用。其次,分析整理了近期国内外重点研究的过渡金属配合物光催化剂的种类,评价了各类过渡金属配合物光催化剂的结构特征及由其组成的不同光催化体系的特点和催化性能的差别,讨论了部分光催化剂的催化机理及优化其催化性能的方法。最后,展望了过渡金属配合物光催化剂在人工光合成领域的研究前景及发展方向。     

响应面法优化Co2+掺杂TiO2制备工艺研究

利用共沉淀-水热法制备了钴掺杂二氧化钛光催化剂,以催化降解水中草甘膦效率为指标,采用响应面法对钴掺杂二氧化钛光催化剂的制备条件进行优化。结果表明,钴掺杂二氧化钛光催化剂的最佳制备工艺为:水热反应温度139.64℃、水热反应时间23.75h、煅烧温度408.17℃和煅烧时间4.04h。利用最佳制备条件下制得的钴掺杂二氧化钛光催化剂催化降解水中草甘膦,降解效率接近80%,与纯二氧化钛相比,催化降解效率有较大幅度提升。     

新型非TiO_2半导体光催化剂

本文概述了半导体光催化剂的催化原理、影响光催化效率的因素及近几年几类新型非TiO2半导体光催化剂的研究进展。重点选取一些有代表性的新型光催化剂,如Ag3PO4及其复合物、硫化物、非TiO2金属氧化物、铋族化合物及钴族化合物等,分析它们的结构组成对光催化性能的影响。最后,对目前光催化剂研究中存在的主要问题进行总结并对未来光催化剂的发展进行展望。     

可见光化的半导体光催化剂

光解水制氢能否实用化取决于太阳光的有效利用率, 研究开发可见光化的光催化剂成为当前光催化剂研究中的重要课题.本文介绍了利用 光解水制氢的反应机理,综述了近年来半导体光催化剂在利用可见光方面的研究进展,重点描述了这些光催化剂的结构,并对该领域今后的研究方向进行了展望.     

Fe_3O_4/SrTiO_3复合光催化剂降解甲基橙

用共沉淀法制备了SrTiO3光催化剂及Fe3O4/SrTiO3复合光催化剂.通过紫外-可见漫反射光谱、XRD、SEM-EDX对其进行表征,以甲基橙为探针分子考察其光催化性能.结果表明,适量Fe3O4的掺入可明显提高Sr-TiO3光催化剂对可见光的吸收,从而增强其光催化性能;在光降解甲基橙的反应中,掺杂10%Fe3O4的SrTiO3光催化剂其催化活性是纯SrTiO3光催化剂的两倍.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.