NiS-PdS/CdS光催化剂的水热法合成及其可见光分解水产氢性能

为提高太阳能转化效率, 高效响应可见光的光催化剂的研究十分必要. 本研究以硫化镉、氯化钯、醋酸镍和硫脲为原料, 利用水热法制备了NiS-PdS/CdS复合光催化剂. 通过X射线衍射(XRD)、紫外-可见光漫反射光谱(DRS)、透射电子显微镜(TEM)和光致发光(PL)光谱等手段对光催化剂进行了表征, 并在乳酸牺牲剂中对光解水制氢活性进行了测试. 结果表明: 助催化剂NiS 和PdS 能较好地分布在CdS 表面上, 形成共负载的NiS-PdS/CdS 光催化剂, 其可见光下的活性比CdS明显增强, 当NiS 和PdS 负载量分别在1.5%和0.41%(w)时, NiS-PdS/CdS获得最好活性, 最大产氢量达到6556 μmol·h^-1, 是CdS活性的7倍, 是NiS/CdS的近3倍, 测得在λ=420 nm时的表观量子效率为47.5%. 助催化剂NiS 和PdS分别起到传递光生电子和光生空穴的作用,两者共负载相比于单独负载, 能使光生载流子的迁移和分离效率更高, 因此提高了光催化产氢活性.     

铂修饰的稀土掺杂TiO2的光催化制氢活性

采用溶胶-凝胶浸渍法和光沉积法制备了系列Pt/RE/TiO2纳米光催化剂,通过XRD和电化学等手段进行了表征.以甲醛为电子给体,考察了光催化剂在紫外光照射下的制氢活性.稀土掺杂提高了Pt/TiO2光催化制氢活性,其顺序分别为La/TiO2＞Sm/TiO2＞Eu/TiO2＞Dy/TiO2＞Er/TiO2.掺入稀土元素后,阻止了TiO2从锐钛矿晶型向金红石晶型的转变,这是光催化剂活性提高的原因之一.计算晶格畸变应力e数据表明,Ti^4 可能反掺入了表面稀土氧化物的晶格中.电化学实验表明稀土掺杂TiO2的平带电位负移,其原因可解释为晶格畸变促使费米能级升高,-致催化剂导带的平带电位负移,因此导带上被激发电子具有更强的还原能力,从而有利于光催化制氢活性的提高.     

多壁碳纳米管修饰的CdS/TiO2复合光催化材料的制备及其光解水制氢特性

以P25 TiO₂(德国Degussa化学公司)粉末为原料采用溶胶-凝胶法制备了含有不同CdS质量分数的复合光催化剂,利用多壁碳纳米管(MWCNTs)对CdS/TiO₂进行修饰,制备了一系列不同CdS含量的MWCNTs/CdS/TiO₂光催化材料。对所得的光催化剂进行了扫描电镜、低温氮吸附-脱附及光解水制氢活性的表征。研究了MWCNTs对CdS/TiO₂催化剂体系光解水制氢活性的影响。结果表明,MWCNTs的引入均使得光解水产氢量(14.0 μmol)增加,与未加入MWCNTs的复合光化剂产氢量(11.6 μmol)相比,平均产氢率增加了18%,最高可达21%。     

不同半导体体系中磷化镍光催化甲酸分解的助催化作用

研究了在不同的半导体体系(TiO₂, CdS和C₃N₄)中, Ni₂P光催化甲酸(HCOOH)分解制氢的助催化效应. 作为助催化剂, Ni₂P与3种半导体形成的复合光催化剂均表现出良好的HCOOH分解制氢活性. Ni₂P/TiO₂, Ni₂P/CdS, Ni₂P/C₃N₄ 3种光催化剂最优的产氢活性分别为41.69, 22.45和47.67 μmol·mg^-1·h^-1, 分别为纯TiO₂, CdS和C₃N₄的3.8倍、 10倍和210倍, 表明Ni₂P在光催化HCOOH分解制氢体系中具有普适性. 研究了光催化HCOOH分解制氢的机理, Ni₂P的加入使光生电子从半导体转移至Ni₂P, 提高了光生电子-空穴对的分离效率; Ni₂P还促进了活性物种·OH的生成, 提高了光催化HCOOH分解的产氢速率.     

表面缺陷与钯的沉积对硫化镉纳米晶粒的光催化制氢性能的影响（英文）

近年来,光解水制氢的发展引起了人们的高度关注。CdS是一种具有可见光响应的很有潜力光催化剂,但由于光生电子/空穴对的快速复合和表面上的析氢反应速率低,所以它仅表现出有限的光解水制氢活性。对CdS表面结构和性能的影响的研究仍然非常有限。在本工作中,我们制备了三种具有不同形貌的CdS纳米晶体(长棒状,短棒状和三角片状)用于光解水制氢。随着纵横比的增加,非极性表面暴露面积增大,表面缺陷程度也随之增加,而表面缺陷可以捕获光生电子/空穴,从而降低其复合机会。我们发现氢的生产率可能与表面缺陷的程度有关。另外,这些缺陷可以用来固定Pd粒子形成异质结结构,有利于光生电荷的分离。在1%(w,质量分数) Pd的协助下,所有CdS催化剂的氢气产率都大大提高。值得注意的是,sr-CdS/Pd的制氢产率达到了7884μmol·h~(-1)·g~(-1),与文献报道的最高值相当。希望本文能够为了解晶体结构和性能对光催化的影响提供认识。     

纳米TiO2复合光催化剂的制备及其光解水制氢性能研究

采用溶胶凝胶法分别制备p-MWNTs-TiO2及p-MWNTs/ZnTPP-TiO2复合纳米光催化剂, 并通过热重分析、透射电镜、X射线粉末衍射和紫外-可见漫反射光谱对光催化剂的物理性质进行了表征. 结果表明: 复合光催化剂中碳纳米管热解温度明显提前, TiO2晶化温度延迟, 相变受到抑制, 紫外特征吸收较纯TiO2有明显红移. 对所制备的光催化剂进行光解水产氢性能测试结果表明: 光催化剂的产氢速率维持相对恒定, 有较好的光学稳定性; p-MWNTs和p-MWNTs/ZnTPP对TiO2的掺杂提高了其光催化活性, 光催化剂产氢活性的大小顺序为p-MWNTs/ZnTPP-TiO2＞p-MWNTs-TiO2＞P25＞TiO2.     

Rh_2O_3/CdS催化剂的表面状态与光电催化活性

采用ESCA和SEM研究了Rh_2O_3/CdS催化剂中Rh的价态和CdS的表面形貌,并将所得信息与催化剂的焙烧温度、表面预处理等制备因素和光电催化分解水活性进行了关联.实验证实,Rb(Ⅲ)是光解水的光电催化中心,只有纯净的CdS表面才能有效地被可见光激发产生表面电子-空穴对.     

Fe3+/V5+/TiO2复合纳米微粒光催化性能的研究

采用溶胶凝胶法制备了Fe^3 /V^5 /TiO2复合纳米微粒作为光催化剂。光降解反应结果表明，其掺杂催化剂Fe^3 /V^5 /TiO2的光催化活性明显提高。光电化学研究显示，铁离子可以成为电荷陷阱，促进空穴的界面传递反应。适量钒离子掺杂使TiO2电极的光电流升高，导带中电子浓度的增大，加快了界面的电子传递反应。共掺杂催化剂中，Fe^3 、V^5 分别提供了空穴与电子的陷阱，同时加快了电子与空穴的界面传递反应，从 更有效地提高光催化活性。双组份共掺杂为提高TiO2光催化活性提供新的途径。     

Cu负载TiO_2及其CdS复合物的光解水性能

光解水制氢技术是解决能源环境问题的重要手段.本研究通过负载非贵金属Cu于TiO_2表面,提高光催化活性,并与CdS进行复合从而获得高活性的可见光催化材料.利用X射线衍射、紫外-可见漫反射和高分辨透射电镜手段表征了Cu的物种、催化材料的光吸收性能及复合物的形貌和复合状态.活性测试显示Cu的负载可以显著提高TiO_2的光催化活性,当Cu负载量为2%(质量分数)时光催化活性产氢最高,为未负载的29倍.Cu/TiO_2与CdS复合后,CdS的电子可以快速的传递到TiO_2表面的Cu上,从而达到电子和空穴的分离,提高了CdS在可见光下的产氢活性.     

水热法制备p-CoFe_2O_4/n-CdS及其光催化制氢性能

水热法制备了系列p-n复合半导体p-CoFe_2O_4/n-CdS。采用X射线衍射(XRD)、冷场发射扫描电子显微镜(SEM)、紫外-可见漫反射光谱(UV-Vis DRS)、透射电镜(TEM)和电化学工作站等对制得的光催化剂进行了结构和性能表征。研究了p-CoFe_2O_4/n-CdS复合光催化剂的可见光催化制氢性能及光腐蚀性能,并对光催化活性的提高、反应条件的影响及光腐蚀行为的抑制机理进行了分析。结果表明:由于CoFe_2O_4和CdS两种窄带隙半导体复合增加了光吸收率;CdS独特的树形结构以及CoFe_2O_4和CdS二者复合所产生的能带交迭和内建电场的三重作用,促进了电子从CoFe_2O_4向CdS的迁移,减少电子-空穴对复合的概率,增强了光催化活性。光生电子-空穴对的分离效率以及光催化剂表面吸附性能都对产氢速率有重要影响。CH_3OH水溶液的pH对光催化剂中光生电子-空穴对的分离效率以及光催化剂表面吸附性能都有影响。牺牲剂CH_3OH的加入以及CoFe_2O_4和CdS二者复合所产生的能带交迭和内建电场的作用都对CdS的光腐蚀起了抑制作用,后者的抑制效果更好。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.