六氰合铁酸铜钴在蜡浸石墨电极表面的电化学沉积

首次报道了电化学沉积的混合金属六氰合铁酸盐修饰电极作为电流型传感器的研究。针对六氰合铁酸盐修饰电极在中性和碱性条件下的不稳定性，采用混合金属电沉积的方法，成功地提高了电极的稳定性，所得到的修饰电极在 ｐＨ ４～１０之间均表现出良好的稳定性。该电极的响应时间（ｔ９５％）为 ０．５ｓ，并对Ｆｅ３＋／Ｆｅ２＋电对表现出良好的电催化作用。催化氧化峰电流与Ｆｅ２＋的浓度在１．０×１０－４～６．５×１０－２ｍｏｌ/Ｌ范围内呈很好的线性关系，检测下限为 １．４×１０－６ｍｏｌ／Ｌ。     

铁的单点络合滴定法研究

本研究了Ｆｅ＾３＋的单点络合滴定法，导出了定量关系式，比较了以铂电极为指示电极和以ＰＶＣ膜四氯络铁（Ⅲ）阴离子电极为指示电极时电位测量的稳定性及所得的分析结果。在Ｆｅ＾３＋浓度为１．０００×１０＾－３ｍｏｌ／Ｌ时，１８次实验的平均值为１．０２×１０＾－４ｍｏｌ／Ｌ，相对偏差小于１．７％；Ｆｅ＾３＋在５．０×１０＾３ｍｏｌ／Ｌ以上时，相对偏差小于０．１％；其浓度小于１０＾－３ｍｏｌ／Ｌ而大于５×１     

Nafion－Ferrocene修饰的次黄嘌呤传感器

本文用Ｆｅｒｒｏｃｅｎｅ（ＦＣ）作为黄嘌呤氧化酶与电极之间的电子传递体，通过牛血清白蛋白和戊二醛交联剂，把黄嘌呤氧化酶固定在Ｎａｆｉｏｎ－Ｆｃ修饰电极表面，制备成次黄嘌呤传感器。该传感器的线性范围为５．０×１０－５—７．５×１０－４ｍｏｌ／Ｌ，响应时间小于７ｏｓ。     

阿霉素在钴离子注入修饰电极上的电化学行为及其应用

阿霉素在０．１ｍｏｌ／Ｌ ＨＡｃ－ＮａＡｃ（ｐＨ４．６２）缓冲溶液中用注入钴的修饰玻碳电极为工作电极进行伏安测定,得到一良好的还原峰;Ｅｐ＝－０．５２２Ｖ（ｖｓ．ＳＣＥ）。峰电流与阿霉素浓度在１．４×１０＾－６－１．４×１０＾－６ｍｏｌ／Ｌ和１．４×１０＾－６－５．６×１０＾－５ｍｏｌ／Ｌ范围内呈线性关系,。     

巯基钴卟啉自组装膜的表征及催化性能

用自制的新型尾式巯基钴（Ⅱ）卟啉在金电极上制成自组装单分子膜,并用ＸＰＳ,ＳＥＭ和电化学的方法进行了表征。该膜对抗坏血酸具有良好的催化作用,其氧化过电位较裸金电极上降低了１４０ ｍＶ,响应电流与抗坏血酸（ＡＡ）的浓度在 ７．８ × １０－５ｍｏｌ／Ｌ～１．０×１０－２ｍｏｌ／Ｌ的范围内具有良好的线性关系,相关系数为 ０．９９８１;检测下限为 １．３ × １０－８ｍｏｌ／Ｌ（富集 １０ｍｉｎ）。     

辅酶Ⅰ在β－萘醌磺酸根修饰金带电极上的电化学还原

研制了聚毗咯／ＮＱＳ修饰金带电极，讨论了ＮＱＳ／ＰＰｙ的电聚合过程及实验条件对金电极上吡咯聚合物膜性质的影响；用成核及生长理论解释了阴离子ＮＱＳ对电聚合过程计时电流曲线的影响，优化了ＮＱＳ／ＰＰｙ／Ａｕ电极的制备条件．该修饰电极稳定性好，对辅酶Ⅰ在金电极上的还原有催化作用．在ｐＨ＝７．０时催化电流在４．０×１０￣（－５）～１．５×１０￣（－３）ｍｏｌ／Ｌ范围内与ＮＡＤ￣＋　浓度有线性关系，探讨了电催化作用的机制．     

聚2-吡啶甲酸修饰电极伏安法测定多巴胺

用循环伏安法制备了聚２－吡啶甲酸修饰玻碳电极，研究了神经递质多巴胺（ＤＡ）在该聚合物薄膜修饰电极上的电化学行为。实验结果表明，在ｐＨ７．０的磷酸盐缓冲溶液中，ＤＡ在该电极上的线性范围为１．０×１０－７～１．０×１０－５ｍｏｌ／Ｌ。该修饰电极对抗坏血酸（ＡＡ）无响应，从而可有效消除其对ＤＡ测定的干扰。     

铟（Ⅲ）—2—硫基苯骈噻唑—7—碘—8—羟基喹啉—5—磺酸三元络合物吸附波研究

在ＨＣｌ－ＮａＡｃ介质（ｐＨ２．５）中，用单扫示波极谱法可获得高灵敏的Ｉｎ（Ⅲ）－２－巯基苯骈噻唑（ＭＢＴ）－７－碘－８－羟基喹啉－５－磺酸（Ｆｅｒｒｏｎ）三元络合物吸附波，峰电位在一－０．６４Ｖ（ｖｓ．ＳＣＥ），峰电流与铟浓度在７．０×１０＾－１０ｍｏｌ／Ｌ～８．８×１０＾－７ｍｏｌ／Ｌ之间呈线性关系，检出限可达３．０×１０＾－１０ｍｏｌ／Ｌ，测得电活性络合物的组成为Ｉｎ（Ⅲ）：ＭＢＴ：１∶１∶     

甲壳素修饰碳糊电极测定亚硝酸根

报道了一种对ＮＯ－２具有高灵敏度和选择性的碳糊化学修饰电极。该电极由碳粉中加入修饰剂甲壳素制备而成。采用酸性Ｂｒｉｔｏｎ－Ｒｏｂｉｎｓｏｎ广泛缓冲溶液（ｐＨ３．９０）为支持电解质,用１．２×１０－４ｍｏｌ／Ｌ十六烷基三甲基溴化铵（ＣＴＭＡＢ）作吸附剂,对亚硝酸根离子进行阳极溶出伏安法测定,检测限为１．０×１０－９ｍｏｌ／Ｌ。在量浓度为２．０×１０－９～２．０×１０－７ｍｏｌ／Ｌ范围内,峰电流与浓度具有线性关系。此修饰电极可直接富集和测定水样中亚硝酸根的含量,大多数离子对测定无干扰,回收率为９６．０％～１１０．０％。     

四氰基醌二甲烷修饰碳糊电极催化氧化测定多巴胺

以四氰基醌二甲烷（ＴＣＮＱ）作介体,制成ＴＣＮＱ修饰碳糊电极。研究该电极的性能。该电极对多巴胺（ＤＡ）有良好的电催化氧化作用,在ＤＡ浓度６．７５×１０＾－５－６．７５×１０＾－３ｍｏｌ·Ｌ＾－１内。催化电流与ＤＡ浓度呈线性关系,响应时间小于１０ｓ。该电极用于针剂中多巴胺测量,结果较好。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.