L波段微波脉冲对微型计算机的辐照效应实验

 在L波段使用1.3 GHz载波频率的微波脉冲辐照微型计算机主板，通过改变脉冲宽度、重复频率和脉冲串长度等参数，实验研究了微波脉冲辐照导致微型计算机失去响应的功率阈值的变化规律，讨论了L波段微波脉冲辐射的积累效应。实验结果表明：当微波脉冲宽度增加时，微波功率阈值下降；当微波脉冲重复频率升高时，微波功率阈值呈下降趋势；在固定重复频率的条件下，微波脉冲数目的增加也会导致微波功率阈值的下降；微波脉冲功率阈值始终小于连续波微波的功率阈值。当微波脉冲间隔时间较长或者脉冲宽度较宽时，微波功率阈值由单个微波脉冲的参数确定，与脉冲重复频率没有明显关系。利用假设的微波脉冲辐射积累效应，可以定性解释和分析微波脉冲辐照微型计算机实验中功率阈值变化的趋势。     

Propagation Characteristics of Infrared Pulse Waves through Windblown Sand and Dust Atmosphere

The physics characteristics of the windblown sand and dust atmosphere at the sand bench of Yellow River in China are discussed. The pulse distortion and time delay of infrared nanosecond pulse propagating through the atmosphere having sand and dust particles are investigated at 1.06 and 3.8 μm, respectively. It is shown that the delay of 10 ns laser pulse propagating through 5 km windblown sand and dust atmosphere are over 1 ns and 10 ns at 1.06 and 3.8 μm, respectively. The pulse spread increases slightly with wavelength increase. The pulse spread of a 10 ns laser pulse is over 40 ns at 3.8 μm. The pulse delay and spread increase rapidly with the sand particle density increasing in atmosphere. The narrower the pulse width is, the more the pulse distortion is. Hence, at infrared band, for a laser pulse propagating in sand and dust atmosphere, the pulse delay and spread are quite severe and need be taken into account for a narrower pulse laser system.     

基于脉冲形成线充电的脉冲压缩技术

利用脉冲压缩技术,将具有一定初始电压的高阻抗长脉冲形成线对低阻抗短脉冲形成线充电到一定值时,其输出开关导通,在其后的传输线上可以产生高功率短脉冲。给出了脉冲压缩理论分析;前级脉冲驱动源采用GW级纳秒脉冲形成线,其特性阻抗为40Ω、电长度为3.9ns,输出脉冲宽度约8ns;研制了与前级脉冲驱动源匹配的脉冲压缩装置和变阻抗传输线,考虑到脉冲压缩装置低阻抗形成线绝缘击穿和开关导通限制,选取脉压装置形成线特性阻抗6.5Ω、电长度0.5ns。利用GW级纳秒脉冲驱动源开展了脉冲压缩实验,得到了输出功率增益达4倍左右的脉宽1.5ns高功率短脉冲,输出脉冲功率增益与理论值基本相符。     

不同波形脉冲激光的时域误差对相干合成的影响

相干合成技术是实现高功率、高亮度光纤激光系统的重要技术途径.然而, 脉冲激光阵列中常常存在时域误差,这将影响脉冲激光的相干合成效果. 建立了脉冲激光存在时域误差时的相干合成理论模型,并在不同波形(方波、三角波、正弦波) 的脉冲激光存在时域误差时,对相干合成光束在远场的脉冲波形、峰值功率、 光强分布和桶中功率(PIB)等特性进行了数值计算和对比分析.计算结果表明: 方波脉冲激光相干合成光束的脉冲波形受时域误差影响严重,光强分布和PIB随着时域误差 的增大发生线性变化;三角波脉冲激光相干合成光束的脉冲波形和峰值功率受时域误差 影响严重,光强分布和PIB在时域误差较大时随着时域误差的增大发生较为剧烈的变化; 正弦波脉冲激光相干合成光束具有较好的输出特性,在两路正弦波脉冲激光相干合成中, 将两脉冲之间的时延控制在脉冲持续时间的10%以内,就能取得良好的合成效果.     

激光测距用半导体脉冲激光测头的研究

研究了激光测距用半导体脉冲激光测头。通过对基于脉冲激光测距原理的半导体脉冲激光器的参数测量分析,研究了半导体脉冲激光的发射和接收。通过优化光学镜头组合,对半导体激光分散光束进行了平行准直。通过开发脉冲激光驱动电路、光电探测接收放大电路和半导体脉冲激光测距实验装置,研制了满足中距离激光测距要求的半导体脉冲激光测头。     

基于窄脉冲传输的脉冲展宽IGBT驱动电路

设计了一种采用高压隔离脉冲变压器传输窄脉冲,然后应用脉冲展宽电路实现宽脉冲驱动信号输出的无源IGBT驱动电路。采用正电压turn-on窄脉冲和负电压turn-off窄脉冲组合传输的方式以减小高压隔离脉冲变压器的体积和重量,脉冲展宽电路使IGBT在turn-on脉冲上升沿导通,在turn-off脉冲上升沿关断,且其具备储能功能,无需高压隔离辅助直流电源为其供电。脉冲信号发生电路和过流保护电路耦合设计,使IGBT在正常关断和过流保护关断情况下,其栅极都处于反压偏置状态,以提高IGBT关断的快速性和可靠性。将驱动电路用于级联Marx高压电路中IGBT开关的驱动,turn-on脉冲和turn-off脉冲的脉宽均选择为2 μs,结果表明,Marx电路在输出脉冲电压峰值为20 kV时工作稳定,且脉宽在3.5~50 μs之间连续可调,等离子体负载下的输出电压和电流波形显示,打火情况发生时,过流保护电路工作稳定可靠。该驱动电路可有效实现宽脉冲驱动信号的产生,具有较强的可靠性和实用性。     

单发太赫兹时域光谱技术

太赫兹时域光谱技术(THz-TDS)广泛应用于材料、生物医学、化学、药学、安检等诸多领域。传统扫描式THz-TDS技术需要通过改变探测光延时逐点扫描并重构时域信号,仅适合于具有较高重复频率且稳定的太赫兹辐射源情形下的样品探测。在低重复频率或涨落较大的太赫兹辐射源情形下和不可逆过程中样品的探测,扫描式THz-TDS不再适用,需要使用单发THz-TDS技术,单发THz-TDS技术原则上仅需要一个激光脉冲就可以获取一个完整的太赫兹时域脉冲波形。介绍几种主要的单发THz-TDS探测技术,这些技术都利用了电光晶体的泡克尔斯效应,通过测量探测光的某个物理量的变化来提取太赫兹信号。根据探测方法不同可分为光谱编码、空间编码和互相关等技术。在光谱编码技术中,探测光不同频率成分在时间上发生分离,不同时间成分分别被太赫兹脉冲不同时刻电场调制,通过测量探测光各个频率被太赫兹脉冲调制前后的光谱的变化提取太赫兹脉冲波形。该方法光路简单,测量结果直观,有较高的信噪比,但其时间分辨率较低,且被测太赫兹信号容易产生失真。为提高被测信号的时间分辨率,有人提出了空间编码技术,即不同位置探测光分别被太赫兹脉冲不同时刻电场调制,通过测量探测光各个位置太赫兹脉冲调制前后的光强变化提取太赫兹脉冲波形。根据不同空间展开方法可分为一维空间编码技术和二维空间编码技术。空间编码技术中虽然有较高的时间分辨率,但由于探测光在空间展开能量分散使得其信噪比相对较低。此外,还有一种较高时间分辨率的技术即互相关技术,可分为共线互相关和非共线互相关技术。在非共线互相关技术中,被太赫兹脉冲调制的激光啁啾脉冲与短脉冲互相关作用产生二次谐波,通过太赫兹脉冲调制前后二次谐波空间分布变化来提取太赫兹信号;在共线互相关技术中被太赫兹脉冲调制的啁啾脉冲与短脉冲共线入射到光谱仪,通过干涉条纹提取太赫兹信号,该技术提高了时间分辨率和信噪比,但光路布置复杂,不能进行实时监测。回顾了这几种单发THz-TDS探测技术的发展历程,综述探测技术的原理、实验方案和测量结果,并讨论了这些探测技术的优势和不足。     

矩阵拓扑结构脉冲变压器

基于集中参数模型分析了脉冲变压器分布参数、变比、负载阻抗等对输出波形前沿和过冲的影响。在此基础上对传统脉冲变压器、矩阵变压器的分布参数进行了分析对比,分析结果表明相对于传统脉冲变压器,矩阵变压器可获得更小的漏感值,但分布电容将有所增大。设计建造了两台变比分别为1∶60,1∶120传统脉冲变压器及变比为1∶120的矩阵变压器,实验研究表明矩阵变压器可获得更小的上冲特征系数,其分布参数与理论分析结果相吻合。     

基于X射线脉冲星导航的地面模拟系统研究

为进行X射线脉冲星导航的关键技术研究,搭建了基于X射线脉冲星导航的地面模拟系统.地面模拟系统由模拟X射线脉冲源、基于微通道板的高灵敏X射线光子探测器、电荷灵敏前放和主放电路、时间测量单元、X射线脉冲轮廓构造及X射线脉冲到达时间测量系统组成.该模拟系统可在地面模拟X射线脉冲星导航的星源的强度、周期及脉冲轮廓,实现对X射线脉冲星单光子到达时间的记录,构造X射线脉冲星脉冲轮廓,计算X射线脉冲到达时间.描述了基于X射线脉冲星导航的地面模拟系统的组成和工作原理,报道了基于X射线脉冲星导航的地面模拟系统的初步结果. 关键词： X射线脉冲星导航 微通道板光子探测器 脉冲轮廓     

Numerical simulation for characterizing femtosecond optical pulses with the SPIDER algorithm

In this article based on the spectral phase interferometry for direct electric-field reconstruction (SPIDER), the femtosecond pulses with various phase characters are numerically simulated. The spectral phases and amplitudes of the transform-limited pulse, the linear chirped pulse, the cubic dispersion pulse, the quartic dispersion pulse, the self-phase modulation pulse and the pulses with the combination of different chirped characters are retrieved. These characterized pulses are applicable to the real-time measurement as samples for diagnosing the chirped characters of pulses quickly.     

飞秒双脉冲激光照射金属薄膜的热行为

通过双温方程对飞秒单脉冲与双脉冲照射金薄膜进行了计算模拟分析,得到了金靶的电子温度和晶格温度随着时间空间的变化。在同样激光能量密度下,单脉冲与双脉冲使得金膜温度的变化表明双脉冲使得更多的激光能量渗透到靶材内部,这些能量可以使得烧蚀深度更深,有利于提高激光烧蚀靶材的效率。计算结果显示随着激光能量密度的增加熔化面深度逐渐增加,单脉冲与双脉冲熔化面深度的变化明显不同。在激光能量密度高于损伤阈值附近,单脉冲的烧蚀深度大于双脉冲的烧蚀深度,随着激光能量密度增加,双脉冲的烧蚀深度将大于单脉冲的烧蚀深度。     

Pulse trapping by ultrashort soliton pulses in optical fibers across zero-dispersion wavelength

A new phenomenon of pulse trapping by the ultrashort soliton pulse of an optical fiber has been experimentally observed. The trapped pulse in the normal-dispersion region copropagates with the soliton pulse in the anomalous-dispersion region along the fiber, and the wavelength of the trapped pulse is shifted to satisfy the condition of group-velocity matching. The wavelengths of the soliton pulse and the trapped pulse change almost continuously as the power of the soliton pulse is varied. Almost perfect conversion efficiencies are observed for soliton self-frequency shift and pulse trapping.     

几周期余弦-高斯激光脉冲的时间重心

研究了几周期超短余弦-高斯脉冲的时间重心与绝对相位以及与余弦函数参量之间的关系．给出了几周期超短余弦-高斯脉冲时间重心的解析表达式和模拟图形．结果表明，余弦-高斯脉冲的时间重心随着绝对相位的变化而发生漂移，并且脉冲宽度对余弦-高斯脉冲时间重心的漂移量也有一定的影响．余弦函数的参量在一定取值范围内对余弦-高斯脉冲也有较大的影响，它可能导致几周期余弦-高斯脉冲的时间重心有较大的漂移．     

Analysis of ultra-short pulse shaping with programmable amplitude and phase masks

Specified ultra-short pulse waveforms could be synthesized with high-resolution zero-dispersion pulse shaping system.The system and parameters are analyzed and discussed.The pulse shaping system with optimized parameters could resolve the frequency components of ultra-broad bandwidth pulse and prevent the spatial shaping of individual frequency components.The specified waveforms,Meyer wavelet and square root raised cosine pulses,are generated with programmable amplitude and phase masks.     

脉冲相干激光雷达测距信号研究

对脉冲激光雷达外差测距信号进行了研究，理论上，采用调Q激光脉冲的数值计算波形，研究了脉冲激光经远处目标漫反向后进行外差接收的波形及其傅里叶变换频谱成分。实验上，研究了可调谐电光调Q射频激励波导CO2激光器脉冲激光经目标反射后的外差波形及其傅里叶变换频谱成分，并计算了目标的距离，理论分析与实验结果一致。     

短脉冲激光辐照下SiO2损伤微观机理简化模型

 从电子密度速率方程出发，建立短脉冲激光辐照下SiO₂材料中导带电子增长简化模型，计算了SiO₂中光致电离速率和电子雪崩速率，得到SiO₂激光损伤阈值与脉冲宽度的关系，计算分析了光致电离和碰撞电离两种电离机制在导带电子累积过程中的不同作用。结果表明：脉冲较长，碰撞电离几乎能提供全部的导带电子，激光损伤阈值与脉宽的0.5次方成正比；脉冲较短时，导带电子主要由碰撞电离产生，光致电离提供碰撞电离的初始电子，激光损伤阈值随着脉宽的减小，先增加后减小。     

LaMgAl11O19:Co2+被动调Q铒玻璃激光器研究

综述了被动调Q铒玻璃激光器的发展概况,推导了被动调Q铒玻璃激光器输出脉冲能量、脉宽的解析表达式,数值模拟了腔内损耗与输出脉冲能量、脉宽及峰值功率的关系以及输出脉冲能量与输入抽运能量的关系.设计了一台LaMgAl11O19:Co2 被动调Q铒玻璃激光器,实验验证了数值模拟分析结果.结果表明,腔内损耗增加将导致输出脉冲能量下降,脉宽变大,从而峰值功率降低.输入能量低于12 J时,输出只有单脉冲,当输入能量大于12 J时,输出会出现双脉冲.在8 J的电输入下,获得了峰值功率50 kW,2.7 mJ的1.535 tm激光输出.最后讨论了提高单脉冲能量的方法.     

Femtosecond parabolic pulse nonlinear compression with gas-filled hollow-core fiber

We study theoretically the spectral intensity evolutions of the femtosecond Gaussian and parabolic pulses with different initial pulse energies and compare the nonlinear compressions of these pulses based on a meter-long hollow-core fiber filled with neon for different initial pulse durations. The pulses are first coupled into gas-filled hollow-core fiber for spectrum broadening, then compressed by the optimal chirp compensation. The parabolic pulse possesses a shorter pulse duration, larger peak power, and cleaner wings than Gaussian pulse. The properties are useful for compressing the pulses and thus generating the high-energy, short-duration pulses.     

单个飞秒激光作用下熔融石英的微爆阈值研究

对飞秒激光脉冲在透明介质中产生微爆的物理机制进行了研究,比较了长短激光脉冲的光击穿机制,基于Fokker-Planck方程建立了飞秒激光微爆模型,给出了飞秒激光脉冲在透明介质中产生微爆的阈值解析表达式.针对飞秒激光脉冲在熔石英介质中的微爆阈值进行了计算,得到的结果与实验结果基本相符.     

Characteristics of perfluorinated amine media for stimulated Brillouin scattering in hundreds of picoseconds pulse compression at 532 nm

The characteristics of stimulated Brillouin scattering(SBS) in perfluorinated amine media and the experimental structure used in hundreds of picoseconds pulse compression at 532 nm are demonstrated. A two-stage SBS pulse compression structure is adopted for this work. The compact double-cell SBS compression structure and the scattering media FC-70 are chosen to compress the incident light from 9.5 to about 1 ns in the first stage. Then,the light is used as the pumping source for the second pulse compression. In the second stage, using a single-cell SBS structure in a pulse compression system, perfluorinated amine media with different phonon lifetimes, such as FC-3283, FC-40, FC-43, and FC-70, are chosen to run the comparative experimental study. The narrowest compressed pulse times obtained are 294, 274, 277, and 194 ps; they respectively correspond to the above listed media. The average width of the compressed pulse width is 320 ps for FC-3283, with a fluctuation range of87 ps. For FC-40, the average pulse width is 320 ps, with a fluctuation range of 72 ps. And for FC-43, the average pulse width is 335 ps, with a fluctuation range of 88 ps. However, the average pulse width is only 280 ps for FC-70, with a fluctuation range of 57 ps. The highest energy reflectivity is more than 80% for all of the media. The experimental results show that a two-stage SBS pulse compression system has lower pump energy requirements, thus making it easier to achieve a compressed pulse waveform. The results also show that the shorter the phonon lifetime of the medium, the narrower the obtained compressed pulse width.