离子液体中Mn(salen)催化环己烯环氧化反应

 研究了离子液体中Mn(salen)络合物催化环己烯的环氧化反应,考察了反应介质、 Mn(salen)络合物催化剂结构和反应条件等对环氧化反应的影响. 在离子液体-CH2Cl2混合溶剂中,以相对廉价的H2O2为氧化剂,得到了高的环己烯转化率和环氧环己烷选择性. 当以邻苯二胺和水杨醛制备的Mn(salen)络合物为催化剂,反应温度为273 K时,在［bmim］BF4-CH2Cl2的混合溶剂中,环己烯的转化率和环氧环己烷选择性分别可达100%和94.0%. 此外,反应结束后,产物可以由正己烷萃取出来,解决了传统均相催化体系中催化剂与产物不易分离的问题.     

离子液体中V2O5催化环己烯选择氧化合成 2-环己烯酮

研究了以V2O5为催化剂,H2O2为氧化剂,在室温离子液体中环己烯氧化制备2-环己烯酮的反应.考察了离子液体种类、反应温度、催化剂用量和氧化剂用量等因素对2-环己烯酮产率的影响.结果表明,在H2O2用量为110 mmol,V2O5/环己烯摩尔比为2%,反应温度为313 K的条件下,在[bmim]BF4离子液体中反应10 h后,环己烯的转化率和2-环己烯酮选择性分别为88.7%和91.1%.对含离子液体的催化体系的重复使用性能进行了考察.结果发现,随着使用次数的增加,环己烯的转化率以及2-环己烯酮的选择性有所下降.     

杂多酸和离子液体催化环己烯的清洁氧化反应研究

以30%过氧化氢为氧化剂,考察了以杂多酸为催化剂氧化环己烯过程中离子液体的作用,讨论了离子液体种类和用量对反应的影响. 结果表明,离子液体的加入顺序不同,其在催化过程中所起的作用不同. 在反应条件为n(环己烯):n(过氧化氢):n(磷钨酸):n([(CH2)4SO3H-Py][HSO4])=1:4.4:0.28:0.56,在回流温度下反应8 h时,己二酸收率可达到84.9%.该催化剂体系可循环使用.     

离子液体中Mn（Salen）催化仲醇的氧化反应研究

以PhI(OAc)2为氧化剂,考察了1,3-二烷基咪唑硫酸酯系列离子液体中Mn(Salen)催化仲醇氧化的反应. 结果表明, 在MMISM-CH2Cl2(1:4,v:v)混合溶剂中, 反应条件为n((-苯乙醇): n(醋酸碘苯): n(催化剂1c)=50: 70: 1时, (-苯乙醇的转化率可以达到97.8%, 产物苯乙酮的选择性为100%, 远高于在纯CH2Cl2中的结果, 也要好于[bmim]BF4和[bmim]PF6对该反应的促进作用. 此外, BMISM及BEISE对催化剂1c有较好的稳定作用,催化剂可以重复使用.     

非对称Schiff碱过渡金属配合物模拟酶催化烯烃环氧化(Ⅰ)

研究了温和条件下以亚碘酰苯为氧源,非对称性的和对称性的Mn(Ⅲ)Schiff碱配合物[Mn(Ⅲ)(CBP－phen－Xsal)Cl,X=H,Cl,Br,NO₂,CH₃,OCH₃]和[Mn(Ⅲ)(CBP－R－CBP)Y,R=CH₂CH₂－,－CH(CH₃)CH₂－,－C₆H₄－;Y=Cl,OCH₃]催化非官能性烯烃苯乙烯、环己烯和α-甲基苯乙烯的环氧化反应.结果表明,非对称配合物Mn(Ⅲ)(CBP－phen－Xsal)Cl是一个良好的催化非官能性烯烃环氧化反应的催化剂体系;中心金属离子Mn(Ⅲ)的电子结合能越小,催化环氧化效果越好;对上述3种烯烃环氧化物最好收率分别达到73％、100％和92％.     

五氧化二钒催化环己烯烯丙位氧化

 研究了以五氧化二钒为催化剂,以过氧化氢水溶液为氧源氧化环己烯. 考察了溶剂种类、溶剂用量、催化剂用量和反应温度等因素对催化剂性能的影响. 结果表明,常温下环己烯在此催化体系中主要发生烯丙位氧化反应生成环己烯酮. 溶剂的种类对催化活性和烯丙位酮式氧化的选择性具有较大的影响,丙酮是该反应的合适溶剂. 在丙酮与环己烯的体积比为4, 五氧化二钒与环己烯的质量比为1∶40, 过氧化氢与环己烯的摩尔比为3和反应温度为20 ℃的条件下,反应24 h后的环己烯转化率可达60%以上,环己烯酮选择性可达85%. 催化反应过程中丙酮可能与过氧化氢作用生成过氧化酮,从而进行氧转移,催化剂则经过V5+/V4+物种的循环使环己烯氧化成为环己烯酮等产物.     

细胞色素P-450铁卟啉模拟酶的快速混合停流吸收谱

采用快速混合停流技术 ,在实际反应条件下 ,考察了不同铁卟啉配合物FeⅢ(Por.)Cl(Por.=TPP、TMOPP和TFPP)与单氧给体过氧苯甲酸m CPBA构建的模拟酶体系中催化活性物种的生成及催化烯烃环氧化过程 .在氧给体m CPBA作用下 ,FeⅢ(TPP)Cl和FeⅢ(TMOPP)Cl均生成了四价铁氧卟啉配合物 ,具有较高的催化环氧化活性 ,但存在严重的氧化分解 ;而FeⅢ(TFPP)Cl则生成了一种较稳定的中间体 ,以致催化活性较低 ,但当溶液中含有一定量的甲醇时 ,催化活性将出现大幅度的提高 .     

Schiff碱铁配合物催化环己烯环氧化

合成了一种吡啶甲醛类Schiff碱铁配合物[Fe(PA2OPd)C12]Cl,并考察了配合物对环己烯绿色环氧化反应的催化活性及反应条件,结果表明:吡啶甲醛类Schiff碱铁配合物对环己烯的环氧化反应有比较高的催化活性及选择性.以过氧化氢为氧源、[Fe(PA2OPd)C12]Cl为催化剂、在pH=5.0左右的乙酸乙酯溶液中25℃反应6.0 h,环己烯转化率可达90.5%,环氧环己烷选择性可达97.2%.     

纳米SnO2高效催化烯烃与H2O2环氧化反应研究

构建了用于催化烯烃与过氧化氢环氧化反应的高效、 绿色催化反应体系. 首先, 通过水热合成法制备了纳米SnO₂, 并在320 ℃下煅烧. 随后, 对所有催化剂进行X射线衍射(XRD)、 紫外-可见漫反射光谱(UV-Vis)、 傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)和透射电子显微镜(TEM)表征. 进一步将催化剂用于以H₂O₂水溶液为氧化剂环氧化各种官能化烯烃(包括环烯烃, 苯乙烯和直链烯烃)的反应, 以高转化率和高选择性得到了环氧化物. 在相似的反应条件下, 发现合成的纳米SnO₂-170催化剂在催化1-甲基环己烯与H₂O₂的环氧化反应中的活性最佳, 在2 h内1-甲基环己烯的转化率达到100%, 环氧化物选择性达到100%.     

8-羟基喹啉对V2O5催化氧化环己烯的调变作用

研究了8-羟基喹啉对丙酮中V2O5催化氧化环己烯合成环己烯酮的调变作用,考察了8-羟基喹啉的用量、反应温度、反应时间、溶剂和催化剂用量对环己烯氧化反应的影响,发现在该催化体系中生成的环己烯醇和环氧环己烷可转化成环己烯酮,在适当的反应条件下可抑制环己烯醇和环氧环己烷的生成.结果表明,当五氧化二钒的用量为1%,五氧化二钒与8-羟基喹啉之比为1∶2,在20℃以下反应时,过氧化氢几乎定向地将环己烯氧化成环己烯酮.认为是8-羟基喹啉与钒的配位作用促进了环己烯酮的生成.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.