No-catalyst growth of vertically-aligned AlN nanocone field electron emitter arrays with high emission performance at low temperature

The AlN nanostructures with a wide band-gap of 6.28 eV are considered as ideal cold cathode materials because of their low electron-affinity. Many methods have been devoted to fabricating AlN nanostructures, but high growth temperature over 800°C and the use of the catalysts in most methods limit their practical application and result in their poor field-emission behaviours in uniformity. This paper reports that without any catalysts, a simple chemical vapour deposition method is used to synthesize aligned AlN nanocone arrays at 550°C on silicon substrate or indium tin oxide glass. Field emission measurements show that these nanocones prepared at low temperature have an average turn-on field of 6 V/μm and a threshold field of 11.7 V/μm as well as stable emission behaviours at high field, which suggests that they have promising applications in field emission area.     

A simple method to synthesize worm-like AlN nanowires and its field emission studies

The worm-like AlN nanowires are fabricated by the plasma-enhanced chemical vapor deposition (PECVD) on Si substrates through using Al powder and N₂ as precursors, CaF₂ as fluxing medium, Au as catalyst, respectively. The as-grown worm-like AlN nanowires each have a polycrystalline and hexagonal wurtzite structure. Their diameters are about 300 nm, and the lengths are over 10 μm. The growth mechanism of worm-like AlN nanowires is discussed. Hydrogen plasma plays a very important role in forming the polycrystalline structure and rough surfaces of worm-like AlN nanowires. The worm-like AlN nanowires exhibit an excellent field-emission (FE) property with a low turn-on field of 4.5 V/μm at a current density of 0.01 mA/cm² and low threshold field of 9.9 V/μm at 1 mA/cm². The emission current densities of worm-like AlN nanowires each have a good stability. The enhanced FE properties of worm-like AlN nanowires may be due to their polycrystalline and rough structure with nanosize and high aspect ratio. The excellent FE properties of worm-like AlN nanowires can be explained by a grain boundary conduction mechanism. The results demonstrate that the worm-like AlN nanowires prepared by the proposed simple and the PECVD method possesses the potential applications in photoelectric and field-emission devices.     

Quasi One-dimensional ZnO Nanostructures Fabricated without Catalyst at Lower Temperature

One- or quasi one-dimensional zinc oxide nanostructures possess plenty of morphologies. Only by controlling the gas flow rates, and partial pressures of argon, oxygen and zinc vapor, can various types of high-quality ZnO nanomaterials (such as wires, belts, arrays, saws or combs, tetraleg rods, nails, and pins) be synthesized through pure zinc powder evaporation without a catalyst at the temperature range of 600–700°C. In this study, deposited nanostructures were characterized by means of scanning electron microscopy, X-ray diffraction and high-resolution transmission electron microscopy. The authors propose and discuss the growth mechanisms of various ZnO. In addition, properties of room temperature photoluminescence and field emission of several typical ZnO nanostructures are measured and investigated.     

An easy way to controllably synthesize one-dimensional Sm B_6 topological insulator nanostructures and exploration of their field emission applications

A convenient fabrication technique for samarium hexaboride(SmB_6) nanostructures(nanowires and nanopencils) is developed, combining magnetron-sputtering and chemical vapor deposition. Both nanostructures are proven to be single crystals with cubic structure, and they both grow along the [001] direction. Formation of both nanostructures is attributed to the vapor-liquid-solid(VLS) mechanism, and the content of boron vapor is proposed to be the reason for their different morphologies at various evaporation distances. Field emission(FE) measurements show that the maximum current density of both the as-grown nanowires and nanopencils can be several hundred μA/cm~2, and their FN plots deviate only slightly from a straight line. Moreover, we prefer the generalized Schottky-Nordheim(SN) model to comprehend the difference in FE properties between the nanowires and nanopencils. The results reveal that the nonlinearity of FN plots is attributable to the effect of image potential on the FE process, which is almost independent of the morphology of the nanostructures.All the research results suggest that the SmB_6 nanostructures would have a more promising future in the FE area if their surface oxide layer was eliminated in advance.     

PLD synthesis of GaN nanowires and nanodots on patterned catalyst surface for field emission study

Patterned gallium nitride nanowires and nanodots have been grown on n-Si (100) substrates by pulsed laser deposition. The nanostructures are patterned using a physical mask, resulting in regions of nanowire growth of different densities. The field emission (FE) characteristics of the patterned gallium nitride nanowires show a turn-on field of 9.06 V/μm to achieve a current density of 0.01 mA/cm² and an enhanced field emission current density as high as 0.156 mA/cm² at an applied field of 11 V/μm. Comparing the peak FE current densities of both the nanowires and nanodots, the peak FE current density of nanowires is around 700 times higher than that of the peak FE current density of nanodots since nanodots have a lower aspect ratio compared to nanowires. The field emission results indicate that, besides density difference, crystalline quality as well as the low electron affinity of gallium nitride, high aspect ratio of gallium nitride nanostructures will greatly enhance their field emission properties.     

水热法制备Co掺杂ZnO纳米棒及其光学性能

采用水热法在石英衬底上以Zn(CH3COO)2.2H2O和Co(NO3)2.6H2O水溶液为源溶液,以C6H12N4(HMT)溶液作为催化剂,在较低温度下制备了Co掺杂的ZnO纳米棒。采用X射线衍射(XRD)和扫描电子显微镜(SEM)对所生长ZnO纳米棒的晶体结构和表面形貌进行了表征,考察了Co掺杂对ZnO纳米棒微观结构和对发光性能影响的机制。结果表明:Co掺杂的ZnO纳米棒呈六方纤锌矿结构,具有沿(002)面择优生长特性,Co掺杂使ZnO纳米棒的直径变细;同时室温光致发光(PL)谱检测显示Co掺杂ZnO纳米棒具有很强的近带边紫外发光峰,而与深能级相关的缺陷发光峰则很弱。本研究采用水热法在石英衬底上于较低温度下生长出了具有较高光学质量的Co掺杂ZnO纳米棒。     

Morphology-control of VO2 (B) nanostructures in hydrothermal synthesis and their field emission properties

VO₂ (B) nanostructures were synthesized via a facile hydrothermal process using V₂O₅ as source material and oxalic acid as reductant. Three nanostructures of nanorods, nanocarambolas and nanobundles were found existing in the products, and a continuous changing of morphology was found in the synthesis process, during which the proportion of these three types of nanostructures can be adjusted by altering the concentrations of oxalic acid. The microstructures were evaluated using X-ray diffraction and scanning and transmission electron microscopies, respectively. FE properties measurement of these three types of nanostructures showed that the nanobundles have the best field emission performance with a turn-on field of ∼1.4 V/μm and a threshold field of ∼5.38 V/μm. These characteristics make VO₂ (B) nanostructures a competitive cathode material in field emission devices.     

Enhanced Field Emission from Large-Area Arrays of W18O49 Pencil-Like Nanostructure

Field enhancement and field screening are two major factors affecting field emission performance of arrays of quasi one-dimensional nanostructures. We have observed enhanced field emission from large-area arrays of W₁₈O₄₉ pencil-like nanostructure due to both the effects of high aspect ratio and enlarged spacing between neighboring nanostructures. These arrays may be grown on silicon substrates by the multi-step thermal evaporation process. The spacing of nanotip-to-nanotip between neighboring nanostructures may be increased by adjusting the growth temperature. The arrays are observed to have a typical turn-on field as low as about 1.26 MV/m and a threshold field as low as about 3.39 MV/m, resulting in increasing field enhancement and decreasing field screening effect.     

Al掺杂四针状ZnO纳米结构的制备及其光致发光和场发射特性

采用热蒸发法成功制备了Al掺杂四针状ZnO纳米结构(T-AZO),利用扫描电子显微镜、X射线衍射仪、荧光光谱仪和场发射测试系统分别研究了不同Al摩尔分数对T-AZO纳米结构表面形貌、微结构、光致发光谱和场发射特性的影响。实验结果表明:T-AZO纳米结构呈现六角纤锌矿结构,Al掺杂对四针状ZnO纳米结构的形貌产生明显影响并且使紫外发射峰产生蓝移。实验中,当Al掺杂摩尔分数为3%时,场发射性能最好,其开启场强为1.33 V/μm,场增强因子为8 420。     

ZnO nanorod arrays with tunable size and field emission properties on an ITO substrate achieved by an electrodeposition method

In the present work,vertically aligned ZnO nanorod arrays with tunable size are successfully synthesized on nonseeded ITO glass substrates by a simple electrodeposition method.The effect of growth conditions on the phase,morphology,and orientation of the products are studied in detail by X-ray diffraction(XRD),scanning electron microscopy(SEM),and transmission electron microscopy(TEM).It is observed that the as-prepared nanostructures exhibit a preferred orientation along c axis,and the size and density of the ZnO nanorod can be controlled by changing the concentration of ZnCl2.Field emission properties of the as-synthesized samples with different diameters are also studied,and the results show that the nanorod arrays with a smaller diameter and appropriate rod density exhibit better emission properties.The ZnO nanorod arrays show a potential application in field emitters.     

Effect of sputtered films on morphology of vertical aligned ZnO nanowires

Vertical aligned ZnO nanowires were grown by MOCVD technique on silicon substrate using ZnO and AlN thin films as seed layers. The shape of nanostructures was greatly influenced by the under laying surface. Vertical nanopencils were observed on ZnO/Si, whereas the nanowires on both sapphire and AlN/Si substrate have the similar aspect ratio. XRD patterns suggest that the nanostructures have good crystallinity. High-resolution transmission electron microscopy (HRTEM) confirmed the single crystalline growth of the ZnO nanowires along [0 0 1] direction. Room-temperature photoluminescence (PL) spectra of ZnO nanowires on AlN/Si clearly show a band-edge luminescence accompanied with a visible emission. More interestingly, no visible emission for the nanopencils on ZnO/Si substrates, were observed.     

ZnS Nanostructures: Synthesis,Properties, and Applications

Zinc sulfide (ZnS) nanostructures have attracted increasing attention due to their potential application in both conditional optical devices and new generation of nano-electronics and nano-optoelectronics because of their special structure-related chemical and physical properties. In this article, beginning with the synthesis of ZnS nanostructures with various original morphologies, we summarize the state-of-art research progresses on ZnS nanostructures. This is followed by the recent progresses on the improvement of their properties, especially the novel potential applications. We highlight the recent achievements on photoluminescence, photocatalysis, light-emitting diodes (LEDs), field-effect transistors (FET), sensors, dye-sensitized solar cells, and field emission (FE) based on ZnS nanostructures. Finally, we present an outlook on the future development of ZnS nanostructures.     

Highly transparent and flexible field electron emitters based on hybrid carbon nanostructure

We demonstrate a unique strategy to fabricate highly transparent and flexible field electron emitters (FEEs) based on combined carbon nanostructures, i.e., conical nanocarbon structures (CNCSs) and single‐walled carbon nanotubes (SWNTs). The combined structure was prepared by spray coating of 1,2‐dichloroethane (DCE) dispersed SWNTs onto neon ion (Ne⁺) irradiation induced CNCSs on nafion substrate. The field emission (FE) property of SWCNTs on both flat nafion and CNCSs surfaces increased with increasing the SWCNTs amount. The best FE result was attained for the highest amount of SWCNTs on the CNCSs substrate. This kind of collective structures is found to be effective emitters on transparent and flexible ion‐irradiated nafion substrate. Moreover, the combined carbon nanostructures showed improved transparency and emission performance compared to the individual nanostructures. The FE properties of 0.5 ml SWCNTs solution on CNCSs surfaces were equal to those of 1.5 ml SWCNTs solution on flat nafion surface. The hybrid structure based emitters (CNCSs and SWCNTs) produced by this method are lower‐cost cathode materials than hybrid structures of SWCNTs and flat nafion. Thus the combined nanostructures of SWCNTs/CNCSs might have huge prospects for the fabrication of efficient transparent and flexible FEEs and their broad application in next‐generation portable display devices. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Field emission from patterned SnO2 nanostructures

A simple and reliable method has been developed for synthesizing finely patterned tin dioxide (SnO₂) nanostructure arrays on silicon substrates. A patterned Au catalyst film was prepared on the silicon wafer by radio frequency (RF) magnetron sputtering and photolithographic patterning processes. The patterned SnO₂ nanostructures arrays, a unit area is of ∼500 μm × 200 μm, were synthesized via vapor phase transport method. The surface morphology and composition of the as-synthesized SnO₂ nanostructures were characterized by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD). The mechanism of formation of SnO₂ nanostructures was also discussed. The measurement of field emission (FE) revealed that the as-synthesized SnO₂ nanorods, nanowires and nanoparticles arrays have a lower turn-on field of 2.6, 3.2 and 3.9 V/μm, respectively, at the current density of 0.1 μA/cm². This approach must have a wide variety of applications such as fabrications of micro-optical components and micropatterned oxide thin films used in FE-based flat panel displays, sensor arrays and so on.     

Effect of heat and time-period on the growth of ZnO nanorods by sol–gel technique

Sol–gel routes to metal oxide nanoparticles in organic solvents under exclusion of water have become a versatile alternative to aqueous methods. We focus on the preparation of well-aligned ZnO nanorod arrays using non-aqueous sol–gel synthesis route, where ZnO nanorods arrays have been grown on glass substrates. This work provides a systematic study of controlled morphology and crystallinity of ZnO nanorod arrays. The investigation demonstrates that the synthesis process conditions of ZnO thin film have strong influences on the morphology and crystallinity of the ZnO nanorod arrays grown thereon, where non-aqueous process offers the possibility of better understanding and controlling the reaction pathways on the molecular level, enabling the synthesis of nanomaterials with high crystallinity and well-defined, uniform particle morphologies. Here the annealing temperature plays an important role on the growth of nanostructures of the ZnO grains and nanorod arrays. The scanning electron microscopy (SEM) image shows that the growth of ZnO nanorod arrays are high-quality single crystals growing along the c-axis perpendicular to the substrates. A detailed analysis of the growth characteristics of ZnO nanostructures as functions of growth time is also reported.     

The effect of substrate surface roughness on ZnO nanostructures growth

The ZnO nanowires have been synthesized using vapor-liquid-solid (VLS) process on Au catalyst thin film deposited on different substrates including Si(1 0 0), epi-Si(1 0 0), quartz and alumina. The influence of surface roughness of different substrates and two different environments (Ar + H₂ and N₂) on formation of ZnO nanostructures was investigated. According to AFM observations, the degree of surface roughness of the different substrates is an important factor to form Au islands for growing ZnO nanostructures (nanowires and nanobelts) with different diameters and lengths. Si substrate (without epi-taxy layer) was found that is the best substrate among Si (with epi-taxy layer), alumina and quartz, for the growth of ZnO nanowires with the uniformly small diameter. Scanning electron microscopy (SEM) reveals that different nanostructures including nanobelts, nanowires and microplates have been synthesized depending on types of substrates and gas flow. Observation by transmission electron microscopy (TEM) reveals that the nanostructures are grown by VLS mechanism. The field emission properties of ZnO nanowires grown on the Si(1 0 0) substrate, in various vacuum gaps, were characterized in a UHV chamber at room temperature. Field emission (FE) characterization shows that the turn-on field and the field enhancement factor (β) decrease and increases, respectively, when the vacuum gap (d) increase from 100 to 300 μm. The turn-on emission field and the enhancement factor of ZnO nanowires are found 10 V/μm and 1183 at the vacuum gap of 300 μm.     

Titanium buffer layer for improved field emission of CNT based cold cathode

Carbon nanotube (CNT) based cold cathodes are considered to be the most promising material for fabrication of next generation high-performance flat panel displays and vacuum microelectronic devices. Adhesion of CNTs with the substrate and the contact resistance between them are two of the important issues to be addressed in CNT based field emission (FE) devices. Here in this work, a buffer layer of titanium (Ti) is deposited prior to the catalyst deposition and the growth was carried out using chemical vapor deposition (CVD) technique. There was significant increase in emission current density from 10 mA/cm² to 30 mA/cm² at the field of 4 V/μm by the use of titanium buffer layer due to much less dense growth of CNTs of smaller diameter. Field emission results suggest that the adhesion of the CNTs to the substrate has improved. The titanium buffer layer has also lowered the contact resistance between the CNTs and the substrate because of which a stable emission of 30 mA for a longer duration was obtained.     

Controlled growth and field emission properties of zinc oxide nanopyramid arrays

Single-crystalline, pyramidal zinc oxide nanorods have been synthesized in a large quantity on p-Si substrate via catalyst-free thermal chemical vapor deposition at low temperature. SEM investigations showed that the nanorods were vertically aligned on the substrate, with diameters ranging from 60 to 80 nm and lengths about 1.5 μm. A self-catalysis VLS growth mechanism was proposed for the formation of the ZnO nanorods. The field emission properties of the ZnO nanopyramid arrays were investigated. A turn-on field about 3.8 V/μm was obtained at a current density of 10 μA/cm², and the field emission data was analyzed by applying the Fowler-Nordheim theory. The stability of emission current density under a high voltage was also tested, indicating that the ZnO nanostructures are promising for an application such as field emission sources.     

生长温度对碳纳米管阴极场发射性能的影响

碳纳米管(Carbon Nanotubes,CNTs)场发射平面显示器(Field Emission Display,FED)与其他显示器比较显示了其独特优点,被认为是未来理想的平面显示器之一。碳纳米管阴极作为器件的核心部分,其性能的好坏直接影响显示器的性能。针对30~60英寸(76.2~152.4cm)大屏幕显示器所用的厚膜工艺,即采用丝网印刷法制备了碳纳米管阴极阵列,研究了化学气相沉积法在不同温度下生长的CNTs的场发射电流-电压特性,找到了适合FED用碳纳米管的最佳生长温度。结果表明生长温度越高(750℃),CNTs场发射性能越好。并用荧光粉阳极测试这些CNTs的场发射发光显示效果,验证了上述结论。     

Magnetic and field emission properties of straw-like CuO nanostructures

This paper reports CuO straw-like nanostructures (nanostraws) synthesized on copper foil substrate through a simple solution method at room-temperature without using any template. The microstructure and morphological of CuO nanostraws were investigated by the X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM), revealing that the straw-like nanostructures were exhibited the nanocrystalline nature with monoclinic structure and monodispersed in large quantity. The possible growth mechanism for the formation of CuO nanostraws products was discussed in detail. In addition magnetic properties and field emission properties of as-obtained products were also investigated.