Combustion synthesis and luminescence properties of NaY1−xEux(WO4)2 phosphors

The red phosphors NaY_1−xEu_x(WO₄)₂ with different concentrations of Eu³⁺ were synthesized via the combustion synthesis method. As a comparison, NaEu(WO₄)₂ was prepared by the solid-state reaction method. The phase composition and optical properties of as-synthesized samples were studied by X-ray powder diffraction and photoluminescence spectra. The results show that the red light emission intensity of the combustion synthesized samples under 394 nm excitation increases with increase in Eu³⁺ concentrations and calcination temperatures. Without Y ions doping, the emission spectra intensity of the NaEu(WO₄)₂ phosphor prepared by the combustion method fired at 900 °C is higher than that prepared by the solid-state reaction at 1100 °C. NaEu(WO₄)₂ phosphor synthesized by the combustion method at 1100 °C exhibits the strongest red emission under 394 nm excitation and appropriate CIE chromaticity coordinates (x=0.64, y=0.33) close to the NTSC standard value. Thus, its excellent luminescence properties make it a promising phosphor for near UV InGaN chip-based red-emitting LED application.     

Synthesis of nano-size BaMgAl10O17:Eu blue phosphor by a rapid exothermic reaction

Ultrafine particles of BaMgAl₁₀O₁₇:Eu²⁺ (BAM) phosphor were synthesized by a solid-state combustion reaction in a powder bed of 0.9BaCO₃+MgO+5Al₂O₃+0.05Eu₂O₃+k(KClO₃+1.5C) composition. A large exothermic reaction of the mixture (KClO₃+1.5C) leads to a self-sustaining combustion mode. Under optimized combustion conditions, the product consisted of BAM powder and KCl was obtained. BAM ultrafine particles resulting from the combustion process were easily obtained by simply washing the salt by-product with water. Combustion-processed BAM phosphor shows a homogeneous grain size of 100-500 nm, good dispersity, regular morphology, and improved luminescence properties.     

花状NaY(MoO4)2的合成和(MoO4)2:Eu3+的光学性质

用微波辅助水热-煅烧法成功合成了花状NaY(MoO₄)₂颗粒,用XRD、XPS、FESEM进行了表征,提出了花状NaY(MoO₄)₂颗粒可能的形成机理. 采用相同的方法合成了NaY(MoO₄)₂:Eu³⁺荧光体,该荧光材料在612 nm处有一个强的发射峰,可用作白色发光二极管的红色磷光剂. 此外,微波辅助水热-煅烧法可能发展成为制备其他花状稀土钼酸盐的有效途径.     

A novel UV-emitting phosphor: Li6CaB3O8.5:Pb

Pure Li₆CaB₃O_8.5 and Li₆Ca_1−xPb_xB₃O_8.5 (0.005≤x≤0.04) materials were prepared by a solution combustion synthesis method. The phase of synthesized materials was determined using the powder XRD and FTIR. The synthesized materials were investigated using spectrofluorometer at room temperature. The emission and excitation bands of the synthesized phosphors were observed at 307 and 268 nm, respectively. The dependence of the emission intensity on the Pb²⁺ concentration for the Li₆Ca_1−xPb_xB₃O_8.5 (0.005≤x≤0.04) was studied and observed that the optimum concentration of Pb²⁺ in phosphor is 0.01 mol. The Stokes shift of the synthesized phosphor was calculated to be 4740 cm^-1.     

A new self-activated yellow-emitting phosphor Zn2V2O7 for white LED

A new self-activated yellow-emitting Zn₂V₂O₇ phosphor was synthesized by high temperature solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the sample with monoclinic formation of Zn₂V₂O₇. The excitation and emission spectra indicated the phosphor can be efficiently excited by near ultraviolet (NUV) light in 220–400 nm range and exhibit a bright broad yellow emission with the highest emission intensity at 531 nm. The broad emission band from 400 to 650 nm can be attributed to the charge transfer transition in the VO₄ tetrahedra, which suggests that the phosphor is a promising yellow phosphor applied for white light-emitting diodes (WLED).     

A red oxide phosphor, Sr2ScAlO5:Eu2+ with perovskite-type structure, for white light-emitting diodes

Sr2ScAlO5:Eu2+,a red oxide phosphor with a perovskite-type structure,has been synthesized through a solid-state reaction and its luminescence properties have been investigated.An absorption band centering at 450 nm is observed from the diffuse reflection spectra and the excitation spectra,indicating that the phosphor can match perfectly with the blue light of InGaN light-emitting diodes.A broad red emission band at 620 nm is found from the emission spectra,originating from the 4f 6 5d-4f 7 transition of the Eu 2+ ions.The best doping content of Eu in this material is about 5%.Sr2ScAlO5:Eu2+is a highly promising red phosphor for use in white light-emitting diodes.     

Monochromatic blue-green and red emission of rare-earth ions in MgGa2O4 spinel

Pr³⁺-activated blue-green phosphor and Eu³⁺-activated red phosphor hosted in MgGa₂O₄ spinel have been prepared by a gel-assisted high-temperature calcination process, respectively. Both anion and cation vacancies in the host were formed by decreasing the Mg concentration in the reaction source. The induced vacancies provide possibility of the accommodation of the doped rare-earth ions with larger atomic size in the highly symmetrical spinel structure. Due to the efficient energy transfer from the spinel host to the sole 4f sub-level of the doped rare earths, monochromatic emissions with high efficiency can be obtained to allow the phosphors to find applications in solid-state laser device and other phosphors excited under low energy. The corresponding spectroscopic transition mechanism has been proposed in this work.     

Synthesis and characterization of thermoluminescent Li2B4O7 nanophosphor

Lithium borate (Li₂B₄O₇) is a low Z_eff, tissue equivalent material that is commonly used for medical dosimetry using the thermoluminescence (TL) technique. Nanocrystals of lithium borate were synthesized by the combustion method for the first time in the laboratory. TL characteristics of the synthesized material were studied and compared with those of commercially available microcrystalline Li₂B₄O₇. The optimum pre-irradiation annealing condition was found to be 300 °C for 10 min and that of post-irradiation annealing was 300 °C for 30 min. The synthesized Li₂B₄O₇ nanophosphor has very poor sensitivity for low doses of gamma up to 10¹ Gy whereas from 10¹ to 4.5×10² Gy this phosphor exhibits a linear response and then from 4.5×10² to 10³ Gy it shows supralinearity. Thermoluminescence properties of Li₂B₄O₇ nanophosphor doped with Cu has also been investigated in this paper. It shows low fading and a linear response over a wide range of gamma radiation from 1×10² to 5×10³ Gy. Therefore the synthesized lithium borate nanophosphor doped with Cu may be used for high dose measurements of gamma radiations.     

Morphology and photoluminescence of BaAl12O19:Mn2+ green phosphor prepared by flux method

This paper reports that the green phosphor BaAl11.9O19:0.1Mn2+ is prepared by a flux assisted solid state reaction method.The effect of flux systems on the crystal structure,morphology and luminescent properties of the phosphor are studied in detail.The samples are characterized by the application of x-ray diffraction patterns,scanning electron microscopy patterns,luminescent spectra and decay curves.The results show that a pure phase BaAl12O19 can be achieved at the firing temperature above 1300℃ by adding the proper flux system,the firing temperature is reduced at least 200℃ in comparison with the conventional solid state reaction method.Maximum photoluminescence emission intensity is observed at 517 nm for(AlF3+Li2CO3) flux system under vacuum ultraviolet region(147 nm) excitation.The photoluminescence emission intensity and the decay time of these phosphor is found to be more superior to that of the corresponding sample prepared by the conventional solid state reaction method implying the suitability of this route for the preparation of display device worthy phosphor materials.     

Luminescent properties of green- or red-emitting Eu-doped Sr3Al2O6 for LED

Eu²⁺-doped Sr₃Al₂O₆ (Sr_3−xEu_xAl₂O₆) was synthesized by a solid-state reaction under either H₂ and N₂ atmosphere or CO atmosphere. When H₂ was used as the reducing agent, the phosphor exhibited green emission under near UV excitation, while CO was used as the reducing agent, the phosphor mainly showed red emission under blue light excitation. Both emissions belong to the d-f transition of Eu²⁺ ion. The relationship between the emission wavelengths and the occupation of Eu²⁺ at different crystallographic sites was studied. The preferential substitution of Eu²⁺ into different Sr²⁺ cites at different reaction periods and the substitution rates under different atmospheres were discussed. Finally, green-emitting and red-emitting LEDs were fabricated by coating the phosphor onto near UV- or blue-emitting InGaN chips.     

Synthesis and characterization of Sr2CeO4 phosphor: Positive features of sol-gel technique

Nano crystalline powder of Sr₂CeO₄ has been synthesized by sol-gel technique. The luminescence properties of the material were compared with the one synthesized by conventional solid state reaction technique. The homogeneity and uniformity of the particle prepared by this method is much better than that prepared by the solid state reaction technique. This blue emitting phosphor was characterized by X-ray diffraction, scanning electron microscopy images and luminescent measurements. The emission spectrum of the material exhibits a broad band around ∼480 nm. The photoluminescence spectra of the Sr₂CeO₄ reveals that the strong blue emission is assigned to the Ce⁴⁺-O²⁻ charge transfer transition (CTT) of Sr₂CeO₄ and not related to lattice defect. The Commission International de l’Eclairage coordinates are x=0.16 and y=0.25.     

Preparation and characterization of Zn2SiO4: Mn phosphors with hydrothermal methods

Mn²⁺-doped Zn₂SiO₄ phosphors had been prepared by hydrothermal method in stainless-steel autoclaves. Effects of synthesized methods, reaction temperature, ambience of heat treatment on the structure and the luminescence properties of this silicate were studied with X-ray diffraction apparatus (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM) and fluorescence spectrum. Results show that Zn₂SiO₄ nanocrystalline can be obtained by hydrothermal method at relatively low temperatures. The absorption pattern shows an absorption edge at about 380 nm originated from ZnO crystals and two absorption bands at about 215 and 260 nm. Mn²⁺-doped Zn₂SiO₄ has a luminescence band with the wavelength at about 522 nm under 255 nm excitation, and the luminescent intensity increases after being heat treated.     

Low thermal quenching and high-efficiency Ce, Tb-co-doped Ca3Sc2Si3O12 green phosphor for white light-emitting diodes

Low thermal quenching and high-efficiency Ca₃Sc₂Si₃O₁₂:Ce³⁺ (CSSO:Ce³⁺) phosphors with co-doping Tb³⁺ ion were prepared by a solid state method and the properties of these phosphors were investigated. The results showed that co-doping of Tb³⁺ not only enhances the photoluminescence remarkably and decreases the thermal quenching of the phosphor, but also heightens the performances of the LEDs fabricated with the phosphor. A high-efficiency and low color temperature white LED was fabricated with the prepared CSSO:1%Ce³⁺, 0.5%Tb³⁺ and a red phosphor, indicating that CSSO:1%Ce³⁺,0.5%Tb³⁺ phosphor is a suitable green phosphor for the fabrication of high-efficiency white LEDs.     

NIR to visible upconversion in Er/Yb co-doped CaYAl3O7 phosphor obtained by solution combustion process

Using the combustion synthesis, CaYAl₃O₇:Er³⁺ phosphor powders co-doped with Yb³⁺ have been prepared at low temperatures (550 °C) in a few minutes. Formation of the compound was confirmed by X-ray powder diffraction. Near-infrared to visible upconversion fluorescence emission in the Er³⁺ doped CaYAl₃O₇ phosphor powder has been observed. The effect of co-doping with triply ionized ytterbium in the CaYAl₃O₇:Er³⁺ phosphor has been studied and the process involved is discussed.     

Preparation, electronic structure, and photocatalytic properties of Bi2O2CO3 nanosheet

Bi₂O₂CO₃ nanosheet with a thickness of less than 20 nm was synthesized via hydrothermal and solvothermal process. The properties of the as-prepared nanosheet were characterized by X-ray diffraction, scanning electron microscopy, and diffuse reflectance spectra. The electronic structure was investigated using first-principle calculations. Application of the as-prepared Bi₂O₂CO₃ nanosheet in photocatalysis was also studied.     

Thermoluminescence characteristics of rare-earth-doped LiCaBO3 phosphor

LiCaBO₃ was synthesized by high-temperature solid-state reaction. The influence of different rare earth dopants, i.e. Dy³⁺, Tb³⁺, Tm³⁺ and Ce³⁺, on thermoluminescence (TL) of LiCaBO₃ phosphor was discussed. We studied the TL properties and some dosimetric characteristics of Ce³⁺-activated LiCaBO₃ phosphor in detail. The effect of the concentration of Ce³⁺ on TL was investigated, the result of which showed that the optimum Ce³⁺ concentration was 1 mol%. The TL kinetic parameters of LiCaBO₃:0.01Ce³⁺ were studied by computer glow curve deconvolution (CGCD) method. The three-dimensional (3D) TL emission spectra were also studied, peaking at 431 and 474 nm due to the characteristic transition of Ce³⁺. We also studied the linearity, annealing condition, reproducibility, fading and different heating rate of the LiCaBO₃:0.01Ce³⁺ phosphor.     

Synthesis and characterization of Mn-doped Zn2SiO4/SiO2 phosphor particles in core-shell structure

Manganese-doped zinc silicate (Zn₂SiO₄:Mn) is a kind of phosphor material that has a photo-luminescent (PL) and cathode-luminescent (CL) properties with intensive green light emission at 520 nm. The particles consisting of SiO₂@Zn₂SiO₄:Mn (SiO₂ core-Zn₂SiO₄:Mn shell) were synthesized via colloidal process and forced precipitation. After drying, the Zn/Mn precipitates were coated on the surface of SiO₂ particles. The Zn/Mn precipitates reacted with SiO₂ and transformed to Zn₂SiO₄:Mn by suitable calcination. The microstructure, crystalline phase, and luminescent characteristics of the products were studied. Besides, a CL device consisting of the core-shell powder was characterized.     

Luminescence in trivalent rare earth activated Sr4Al2O7 phosphor

In this paper we report the combustion synthesis of trivalent rare-earth (RE³⁺ = Dy, Eu and Ce) activated Sr₄Al₂O₇ phosphor. The prepared phosphors were characterized by the X-ray powder diffraction (XRD) and photoluminescence (PL) techniques. Photoluminescence emission peaks of Sr₄Al₂O₇:Dy³⁺ phosphor at 474 nm and 578 nm in the blue and yellow region of the spectrum. The prepared Eu³⁺ doped phosphors were excited by 395 nm then we found that the characteristics emission of europium ions at 615 nm (⁵D₀?⁷F₂) and 592 nm (⁵D₀?⁷F₁). Photoluminescence (PL) peaks situated at wavelengths of 363 and 378 nm in the UV region under excitation at around 326 nm in the Sr₄Al₂O₇:Ce³⁺ phosphor.     

Lattice site dependent cathodoluminescence behavior and surface chemical changes in a Sr5(PO4)3F host

Eu activated Sr₅(PO₄)₃F phosphor powders have been subjected to the electron bombardment at 2 keV (10 μA) at an oxygen pressure of 1×10⁻⁶ Torr. The synthesized Sr₅(PO₄)₃F phosphor was identical to the hexagonal apatite structure, with the Sr present at two different sites C_s (S1) and C₃ (S2) in the Sr₅(PO₄)₃F host, as inferred from the crystallographic study. Cathodoluminescence (CL) and Auger electron spectroscopy of the phosphor excited by the same electron beam were used to monitor changes in the surface state during prolonged electron bombardment. A direct correlation between the surface reactions and the degradation of the CL brightness was observed. Both C and F were depleted from the surface during electron bombardment. The postulated mechanism for the electron stimulated chemical reactions on the phosphor surface is electron beam dissociation of molecular species to atomic species, which subsequently react with C to form volatile compounds CO₂, CH₄, etc. and with Sr₅(PO₄)₃F to form a non luminescence layer of metal oxides of Sr and P.     

Photoluminescence properties and effects of dopant concentration in Bi2ZnB2O7:Tb phosphor

A novel green phosphor, Tb³⁺ doped Bi₂ZnB₂O₇ was synthesized by conventional solid state reaction method. The phase of synthesized materials was determined using the XRD, DTA/TG and FTIR. The photoluminescence characteristics were investigated using spectrofluorometer at room temperature. Bi₂ZnB₂O₇:Tb³⁺ phosphors excited by 270 nm and 485 nm wavelengths. The emission spectra were composed of three bands, in which the dominated emission of green luminescence Bi₂ZnB₂O₇:Tb³⁺ attributed to the transition ⁵D₄ → ⁷F₅ is centered at 546 nm. The dependence of the emission intensity on the Tb³⁺ concentration for the Bi_2−xTb_xZnB₂O₇ (0.01 ≤ x ≤ 0.15) was studied and observed that the optimum concentration of Tb³⁺ in phosphor was 13 mol% for the highest emission intensity at 546 nm.