The effect of thickness and annealing condition on the microstructure and magnetic properties of Fe/Pt multilayer thin films

[Fe(0.5 nm)/Pt(0.5 nm)]₄₀, [Fe(1 nm)/Pt(1.5 nm)]₂₀ and [Fe(3 nm)/Pt(3 nm)]₁₀ multilayer were prepared by DC magnetron sputtering. By conventional furnace annealing (CA) at 270–600 °C for various time, all of the films still remained the disordered structure with the soft magnetic phase. By rapid thermal annealing (RTA) at 500 °C for various time, we obtained the [Fe(1 nm)/Pt(1.5 nm)]₂₀ and [Fe(3 nm)/Pt(3 nm)]₁₀ films with L1₂ ordered FePt₃ phase which was almost ferromagnetic at room temperature. However, the [Fe(0.5 nm)/Pt(0.5 nm)]₄₀ films was still disordered state even under RTA. Compared with CA, RTA exposed an outstanding effect on accelerating the phase transition when the film thickness is over [Fe(0.5 nm)/Pt(0.5 nm)]₄₀.     

三核铜（I）配合物的合成与荧光光谱

室温下，通过双核配合物[Cu(dppm)(NO3)]2(dppm=双二苯基膦甲烷)与四苯基硼钠在甲醇和二氯甲烷混合溶剂中反应制备了三核铜(I)配合物[Cu3(dppm)3(NO3)(OH)](NO3)，经过红外光谱、热重分析、核磁和ES-MS等现代分析手段表征了配合物的物理化学性质，并进一步研究了配合物在室温下的荧光光谱特征。     

Synthesis of thiolate-protected silver nanocrystal superlattices from an organometallic precursor and formation of molecular di-<Emphasis Type="Italic">n</Emphasis>-alkyldisulfide lamellar phases

Abstract  

Silver nanocrystal superlattices (NCSs) stabilized by hexadecanethiol have been prepared through reduction of [Ag(hexadecanethiolate)] _n , formed in situ by reaction of the organometallic precursor [Ag(C₆F₅)] and hexadecanethiol. The nanostructures have been characterized by transmission electron microscopy (TEM) and X-ray diffractometry (XRD). Several reaction parameters such as solvent (anisole or toluene), reaction temperature (150 or 120 °C) or silver:thiol ratio (1:1 or 2:1) have been studied. The NCSs are formed by silver nanoparticles which sizes range from 3.7 to 5.1 nm, depending on the reaction conditions. The formation a of lamellar phase of di-n-hexadecyldisulfide by oxidation of the hexadecanethiolate ligands bonded to Ag(I) is detected by XRD.     

Magnetoresistance in epitaxial [NiFe/Cu/Co(/Cu)] films

Epitaxial [NiFe/Cu/Co(/Cu)] films have been grown on Si(100)/Cu substrates using an ultrahigh vacuum evaporation method. Magnetoresistance (MR) and magnetization were measured at room temperature with maximum applied field, 40 kA/m. The (100) oriented [NiFe(3 nm)/Cu(6 nm)/Co(3 nm)/Cu(6 nm)] × 10 multilayers showed a sharply peaked MR curve (when the external field was applied along [011] direction) due to magnetization rotation of free NiFe layers separated from Co layers with thick Cu layers. Furthermore the interposition of a Ag layer in the Cu layer reduced the couplings between ferromagnetic layers and improved the sensitivity of the [NiFe/Cu/Co(/Cu)] film. Si(100)/Cu(5 nm)/[Co(3 nm)/Cu(2.4 nm)/Ag(0.2 nm)/Cu(2.4 nm)/NiFe(3 nm)/Cu(2.4 nm)/Ag(0.2 nm)/Cu(2.4 nm)] × 10 multilayers showed a resistivity change of about 8.2% per kA/m (12 Oe).     

Direct observation of the ultrafast energy transfer in a porphyrin and ruthenium dyad

The luminescence dynamics of a polypyridyl ruthenium II [Ru（phen）2（ip）]2＋ and 5,10,15,20- tetraphenylporphyrin （H2TPP） dyad have been measured by using time-resolved fluorescence spectroscopy. The transient luminescent spectra of the dyad show an ultrafast energy transfer within 300 ps after pho- toexcitation of the [Ru（phen）2（ip）]2＋ at 453 am. However, no energy transfer has been observed as the excitation wavelength is 400 nm, corresponding to the absorption peak of H2TPP. The origin of the energy transfer from [Ru（phen）2（ip）]2＋ to H2TPP has been analyzed according to the FSrster energy-transfer theory.     

Diamond under pressure: Ab-initio calculations of the equation of state and optical phonon frequency revisited

The pressure–volume relationship and the zone-center optical phonon frequency of cubic diamond at pressures up to 600?GPa have been calculated based on density functional theory (DFT). Different methods (ranging from pseudopotential to all-electron approaches) and different approximations [local density approximation (LDA), generalized gradient approximation (GGA)] for the exchange-correlation (XC) energy have been applied. The results are compared to recent precise measurements up to 140?GPa. Possible implications for the experimental pressure determination based on the 1986 calibration of the ruby luminescence method are discussed.     

CX2(X=F, Cl, Br)与CH3CHO中C－C键插入和环加成的理论模拟

采用密度泛函[DFT]和自然键轨道理论[NBO]及高级电子耦合簇[CCSD(T)]和电子密度拓扑分析[AIM]方法, 研究了单重态二卤卡宾CX2(X=F, Cl, Br)与乙醛CH3CHO 中C—C键的插入反应及其环加成的反应机理. 在B3LYP/6-31G(d)水平上优化了各驻点构型, 用频率分析和内禀反应坐标法(IRC)对过渡态进行了验证, 计算了各物种的CCSD(T)/6-31G(d, p)单点能量. 用经Wigner校正的Eyring过渡态理论分别计算了1大气压下主反应通道的热力学与动力学性质, 并对反应通道中构型进行了自然键轨道及电子密度拓扑分析. 结果表明, CF2与CH3CHO反应的主产物是P2F[CH3CF2CHO: 插入CH3CHO中C-C键, 反应I(2)], 而CCl2及CBr2与CH3CHO反应的主产物是P1Cl[Cl2COCHCH3: 成环反应II(1)]及P1Br[Br2COCHCH3: 成环反应III(1)], 1大气压下, 反应I(2)和II(1)及III(1)进行的适宜温度范围分别为400~1300K和400~1000K.     

蓝宝石衬底上GaN/AlxGa1-xN超晶格插入层对AlxGa1-xN外延薄膜应变及缺陷密度的影响

室温300K下,由于Al_xGa_1-xN的带隙宽度可以从GaN的3.42eV到AlN的6.2eV之间变化,所以Al_xGa_1-xN是紫外光探测器和深紫外LED所必需的外延材料.高质量高铝组分Al_xGa_1-xN材料生长的一大困难就是Al_xGa_1-xN与常用的蓝宝石衬底之间大的晶格失配和热失配.因而采用MOCVD在GaN/蓝宝石上生长的Al_xGa_1-xN薄膜由于受张应力作用非常容易发生龟裂.GaN/Al_xGa_1-xN超晶格插入层技术是释放应力和减少Al_xGa_1-xN薄膜中缺陷的有效方法.研究了GaN/Al_xGa_1-xN超晶格插入层对GaN/蓝宝石上Al_xGa_1-xN外延薄膜应变状态和缺陷密度的影响.通过拉曼散射探测声子频率从而得到材料中的残余应力是一种简便常用的方法,Al_xGa_1-xN外延薄膜的应变状态可通过拉曼光谱测量得到.Al_xGa_1-xN外延薄膜的缺陷密度通过测量X射线衍射得到.对于具有相同阱垒厚度的超晶格,例如4nm/4nm,5nm/5nm,8nm/8nm的GaN/Al_0.3Ga_0.7N超晶格,研究发现随着超晶格周期厚度的增加Al_xGa_1-xN外延薄膜缺陷密度降低,Al_xGa_1-xN外延薄膜处于张应变状态,且5nm/5nmGaN/Al_0.3Ga_0.7N超晶格插入层Al_xGa_1-xN外延薄膜的张应变最小.在保持5nm阱宽不变的情况下,将垒宽增大到8nm,即十个周期的5nm/8nmGaN/Al_0.3Ga_0.7N超晶格插入层使Al_xGa_1-xN外延层应变状态由张应变变为压应变.由X射线衍射结果计算了Al_xGa_1-xN外延薄膜的刃型位错和螺型位错密度,结果表明超晶格插入层对螺型位错和刃型位错都有一定的抑制效果.透射电镜图像表明超晶格插入层使位错发生合并、转向或是使位错终止,且5nm/8nmGaN/Al_0.3Ga_0.7N超晶格插入层导致Al_xGa_1-xN外延薄膜中的刃型位错倾斜30°左右,释放一部分压应变.     

Numerical calculation of Kerr spectra for Co/Pt magnetic multilayered films

The Kerr spectra as function of wavelength, incident angle and layer number are calculated with 4×4 matrix method. It is found that the calculated results are in good agreement with experimental ones for [Co (0.3 nm)/Pt (0.4 nm)]×43/glass (1.21 mm) and [Co (0.4 nm)/Pt (1.1 nm)]×53/glass (1 mm). In addition, for [Co (0.3 nm)/Pt (0.4 nm)]×43/glass (1.21 mm), it shows a maximum Kerr rotation at N = 10. For [Co (0.4 nm)/Pt (1.1 nm)]×53/glass (1 mm), the calculated Kerr rotation as a function of incident angle reveals maximum when the incident angle is 89°.     

Distance between a native cofactor and a spin label in the reaction centre of Rhodobacter sphaeroides by a two-frequency pulsed electron paramagnetic resonance method and molecular dynamics simulations

The distance between the paramagnetic state of a native cofactor and a spin label is measured in the photosynthetic reaction centre from the bacterium Rhodobacter sphaeroides R26. A two-frequency pulsed electron paramagnetic resonance method [double-electron-electron spin resonance (DEER)] is used. A distance of 3.05 nm between the semiquinone anion state of the primary acceptor (Q(A)) and the spin label at the native cysteine at position 156 in the H-subunit is found. Molecular-dynamics (MD) simulations are performed to interpret the distance. A 6 ns run comprising the entire RC protein yields a distance distribution that is close to the experimental one. The average distance found by the MD simulation is smaller than the distance obtained by DEER by at least 0.2 nm. To better represent the experiments performed at low temperature (60K), a MD method to mimic the freezing-in of the room-temperature conformations is introduced. Both MD methods yield similar distances, but the second method has a trend towards a wider distance distribution.     

金属-有机骨架[Zn(BDC)(H2O)2]n膜的原位制备及其对硝基苯类有机物的可逆检测

采用水热法,将锌片与对苯二甲酸(H2BDC)反应原位合成[Zn(BDC)(H2O)2]n薄膜.利用XRD和SEM分别对薄膜的结构、形貌和尺寸等进行了表征.结果表明,薄膜是由一维链状结构的金属-有机骨架材料纳米晶构成的,随着水热时间的增加,薄膜中的[Zn(BDC)(H2O)3]n纳米晶晶粒尺寸逐渐减小.该薄膜在紫外光的激...     

Mononuclear Co(III) and Ni(II) Complexes with Polypyridyl Ligands, [Co(phen)2(taptp)]3+ and [Ni(phen)2(taptp)]2+: Synthesis, Photocleavage and DNA-binding

Two novel, mixed ligand complexes of cobalt(III) and nickel(II), [Co(phen)₂(taptp)]³⁺ (1) and [Ni(phen)₂(taptp)]²⁺ (2) (phen = 1,10-phenanthroline and taptp = 4,5,9,18-tetraazaphenanthreno [9,10-b]triphenylene), were synthesized and characterized by elemental analyses, UV-visible and NMR spectroscopies. The binding interactions of the two complexes with DNA have been investigated using absorption and emission spectroscopy methods and electrophoresis measurement mode. The intrinsic binding constants for these complexes to DNA are in the order of 10⁵. In Tris buffer, the Co(III) complex shows a moderate luminescence which was enhanced after binding to DNA. However for complex Ni(II), no emission was observed in Tris buffer. The [Co(phen)₂(taptp)]³⁺ and [Ni(phen)₂(taptp)]²⁺ can cause the photocleavage of DNA supercoiled pBR322 upon irradiation by 360 nm light. Based on the data, an intercalative mode of DNA binding is suggested for the two complexes.     

BiFeO3纳米粉的制备、结构表征及铁磁特性

采用溶胶-凝胶法成功地制备出BiFeO₃纳米粉,利用X射线衍射仪（XRD）、扫描电子显微镜（SEM）和透射电子显微镜（TEM）测量分析了其结构与形貌,结果发现：胶体经700℃烧结2—25 h后,形成了30 nm左右的较纯相BiFeO₃粉末,该样品为六角晶系,R3-m［166］空间群,晶胞参数为a=b=05580 nm,c=06939 nm,其（101）面晶面间距为0396 nm左右,（ 关键词： 溶胶-凝胶法 3纳米粉')" href="#">BiFeO₃纳米粉 结构表征 铁磁特性     

两种含有[Mo8O26]簇骼的化合物的光谱研究

合成了两种具有含有β-[Mo8O26]4-簇阴离子的新型化合物: [H(4,4'-bipy)]2[K2Mo8O26](Ⅰ)和H3[NaMo8O26](4,4'-bipy)5(H2O)4 (Ⅱ), 用FTIR, NIR-Raman, UV-Vis DRS和荧光光谱等研究手段进行光谱研究, 探讨其结构与性能的关系. 虽然这两个化合物中阴离子类似, 都含有β-[Mo8O26]4-簇骼基元, 但它们与碱金属的连接方式不同, 其FTIR和NIR-Raman光谱的特征振动频率与其结构相关;化合物Ⅰ和Ⅱ的UV-Vis DRS光谱显示, 在250～300 nm有宽的紫外吸收谱带;化合物Ⅰ的稳态荧光光谱观察到分别以350 nm激发下在450～650 nm处产生一个宽的发射峰;化合物Ⅱ在325 nm激发下在400～550 nm处产生一个发射峰. 化合物Ⅰ在不同温度下稳态固体荧光光谱随着温度的下降, 荧光发射强度增强, 其时间分辨固体荧光光谱的荧光寿命随着温度的降低而增长.     

Spectrophotometric and spectrofluorimetric determinations of veterinary drug enrofloxacin in pharmaceutical formulation

Four simple, sensitive spectrophotometric and spectroflourimetric methods (A-D) for the determination of veterinary drug enrofloxacin (ENFX) in pharmaceutical formulation have been developed. Method (A) is based on formation of ternary complex of ENFX with Pd(II) in presence of methyl cellulose as surfactant and acetate-HCl buffer pH 4.0. Method (B) is based on the oxidation of ENFX with alkaline potassium permanganate to give a green colored reaction product. The reaction was monitored spectrophotometrically by measuring the absorbance of the reaction product at 604 nm. Method (C) is based on the oxidation of the ENFX by a known excess of potassium permanganate in acid medium and subsequent determination of unreacted oxidant by reacting it with safronine O (SFO). Method (D) is based on the chelation of ENFX with Zr(IV), to produce fluorescent chelate. At the optimum reaction conditions, the drug/metal chelate showed excitation maxima at 280 nm and emission maxima at 440 nm. The optimum experimental parameters for the reaction have been studied. The validity of the described procedures was assessed. Statistical analysis of the results has been carried out revealing high accuracy and good precision. The proposed methods were successfully applied for the determination of the selected drug in pharmaceutical preparations with good recoveries. The procedures were accurate, simple and suitable for quality control application.     

Synthesis and Investigation of Double Stimuli-Responsive Behavior of N-Isopropylacrylamide and Maleic Acid Copolymer in Solutions

Poly(N-isopropylacrylamide-co-maleic acid) [poly(NIPAAm-co-MA)] linear copolymer with comonomer molar ratio NIPAAm:MA = 94:6 was synthesized by free-radical copolymerization. The molar mass, M_sD = 28,000 Da, of poly(NIPAAm-co-MA) was determined using hydrodynamic methods. The self-assembly of poly(NIPAAm-co-MA) in aqueous solution at a concentration of 0.015 g cm^?3 within the pH interval from 1.8 to 10.6 and the temperature interval from 22 to 60°C was investigated by static and dynamic light scattering. The copolymer showed a double temperature and pH responsiveness. Three types of particles, namely, macromolecules (or unimers), micellar-like structures, and loose aggregates existed in the poly(NIPAAm-co-MA) aqueous solutions. The fraction of dissolved entities and the hydrodynamic radii of the micellar-like structures and loose aggregates depended considerably on temperature and pH. The temperature of the phase separation and the width of the phase separation interval increased with pH. An influence of pH on kinetic processes in poly(NIPAAm-co-MA) solutions was observed.     

Temperature controlled synthesis of SrCO3 nanorods via a facile solid-state decomposition rout starting from a novel inorganic precursor

Strontium carbonate nanorods have been successfully synthesized via solid-state decomposition of a new precursor, [Sr(Pht)(H₂O)₂]. The obtained nanorods were found to be orthorhombic with the length of 70-100 nm and the diameter of about 10-15 nm. The Effect of calcinations temperature on morphology and purity of the products has been investigated. Strontium carbonate nanorods were formed at 500 °C. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectroscopy. In addition, further evidence for the purity and stoichiometry of the product was obtained by XPS (X-ray photoelectron spectroscopy) spectrum.     

Antibacterial effects of chitosan–tripolyphosphate nanoparticles: impact of particle size molecular weight

A simple fabrication approach for achieving nanoparticle patterns based on a room temperature chemically driven strategy is reported. Suitably engineered colloidal luminescent nanocrystals (NCs) (4 and 6 nm in diameter), namely organic capped and silica-coated negatively charged CdSe@ZnS NCs, have been selectively assembled onto defined domains in a binary hydrophobic/hydrophilic chemical pattern, purposely fabricated by combining microcontact printing and wet chemistry procedures. The goal of the work has been to investigate the experimental parameters governing the assembly process at molecular level, in order to elucidate factors regulating interactions at the interfaces. For this purpose, specific sets of conditions, namely substrate patterns and NCs with distinct surface functionalization, have been prepared and tested using different NC dispersing solvents. The NC assembly has been demonstrated driven by non-covalent forces, namely Van der Waals or electrostatic interactions occurring at the NC/substrate interface. The overall study has provided a comprehensive understanding of the role of solvent and molecular chemistry at interfaces in NC assembling. The obtained results can be valuable to set up reliable procedures for developing reproducible patterning protocols potentially useful for the fabrication of NC-based devices.     

钌(Ⅱ)配合物与DNA相互作用的瞬态发光特性

以三种新合成的钌配合物[Ru(bpy)₂(7-CH₃-dppz)]²⁺、[Ru(bpy)₂(7-F-dppz)]²⁺、[Ru(phen)₂(7-F-dppz)]²⁺为研究对象,采用时间分辨的荧光光谱技术分别测量了这三种钌配合物与小牛胸腺DNA相互作用时的瞬态荧光动力学过程。结果表明:[Ru(bpy)₂(7-CH₃-dppz)]²⁺的发光寿命最长(约382 ns),而[Ru(bpy)₂(7-F-dppz)]²⁺的发光寿命最短(约65 ns)。分析表明:钌配合物的发光来源于配合物分子中的电荷转移态到基态的辐射跃迁。通过钌配合物与DNA的相互作用,使得配合物激发态分子的无辐射弛豫几率减小,从而导致发光寿命的增加。配合物的分子与DNA相互作用越强,激发态分子的无辐射弛豫几率越小,发光寿命也越长,最终导致高的发光效率。配合物的分子结构对配合物的分子与DNA的相互作用具有重要的影响。