催化加氢热解/气相色谱-质谱研究沉积物中生物标志物

针对地质体中高演化沉积有机质,应用催化加氢热解/气相色谱-质谱方法测定了干酪根中以共价键结合的生物标志物。结果表明,实验样品的催化加氢热解产物收率明显高于二氯甲烷（DCM）索氏抽提,产物色谱图中饱和烃的峰形、保留时间和质谱特征与索氏抽提峰形基本一致;对比两种方法产物中饱和烃主要指标甾烷m/z 217和藿烷m/z 191表明,经过加氢还原,干酪根分子网络中共价键结合着两种生物标志物分子骨架得到印证,为催化加氢热解提取沉积物中生物标志物的方法可靠性提供了依据。催化加氢热解/气相色谱-质谱技术是一种对研究高演化沉积有机质中生物标志化合物有独特作用的有效分析手段。     

沉积有机质的加氢热解及其地球化学信息研究

用加氢热解(hydropyrolysis)释放高演化源岩干酪根和沥青分子网络中共价键结合的生物标志物,在恢复原始有机地球化学信息方面具有重要的意义,可应用于源岩有机质生源确定、成熟度确定、古沉积环境判识以及油/源对比等.实验表明,样品沥青“A“与加氢热解产物中生物标志物的组成存在一定的差异,加氢热解产物中含有丰富的地球化学信息.加氢热解具有产物收率高、结构重排少、生物特征保持完整等特点,能够合理地释放出沉积有机质分子骨架中具有原生性的组分,保持完整的原始生物标志物结构和立体化学特征.加氢热解技术为油气地球化学研究开辟了新途径.     

地质体中生物标志化合物的HyPy/GC-MS法测定

采用催化加氢热解(HyPy)联用GC-MS技术,提取和测定了地质有机大分子网络中共价键结合的生物标志物分子,建立了研究高演化干酪根分子中共价键结合的生物标志物信息的独特有效的分析方法.优化的实验条件为:样品担载Mo的质量分数为1%,升温速率5℃/min,反应终温550℃并恒温20 min,氢气压力10～15 MPa,氢气流速1.0 L/min.实验表明,该方法具有产物收率高、结构重排少、生物特征保持完整等特点,能够合理地释放出沉积有机质分子骨架中具有原生性的组分,保持完整的原始生物标志物结构和立体化学特征.将该技术应用于典型的地质样品分析中,结果令人满意.     

不同催化剂上有机质加氢热解行为及催化作用机理研究

对不同类型催化剂如Zn Cl2、Ni Cl2、Fe2O3、Y型沸石(Na Y)及Mo S2上有机质的催化加氢热解行为及反应机理进行了研究。结果表明,有机质加氢液态产物收率和组成受控于催化剂类型,但不同催化剂上加氢热解所得到的产物生标参数差异不大;同时,对于不同成熟度和类型的有机质样品,各催化剂所体现的催化效果也不尽相同。基于固体残渣元素组成、红外光谱和X射线衍射分析结果发现,不同类型催化剂上的加氢作用机制也存在明显差异。与Ni Cl2相比,Zn Cl2体系中除存在催化裂解和催化加氢作用外,还存在质量传递效应;Fe2O3催化剂主要是通过其表面的活性O吸收H2中的H形成H自由基而加速有机质的加氢反应;Mo S2体系存在过渡金属Mo的催化加氢和中间产物H2S的自由基引发作用两种催化机制。     

氨基酸多相催化转化研究进展

氨基酸的催化转化是实现氨基酸在化学和生物领域利用的重要手段.综述了氨基酸催化加氢制手性氨基醇、催化脱羧制胺类和腈类、催化脱氨制羧酸及其衍生物、催化热解制生物燃料及作为多相手性催化剂的应用的研究进展.在氨基酸催化加氢中,Ru基和Rh基催化剂展现了较好的催化性能,而反应温度是影响产物光学纯度的主要因素.脱羧反应、脱氨反应和热解反应需要相对较高的温度,对能耗要求较大.寻找高活性和高选择性的多相催化剂实现反应温度和压力的降低是今后的研究方向.而氨基酸作为多相手性催化剂,其研究的重点应在催化剂的效率及分离回收利用上.     

生物质快速热解制备液体燃料

本文回顾了生物质快速热解液化技术的国内外研究现状,重点叙述了初级生物油的化学组成和燃料性质,指出生物油是一种复杂的含氧有机混合物,具有水分含量高、氧含量高、热值低、酸含量高、安定性差和化石燃油不互溶等独特的性质;针对这些性质,介绍了几种常用的生物油精制提炼方法,包括催化裂解、催化加氢、高温热解气过滤、添加助剂、催化酯化、柴油乳化以及制备富氢合成气与费托合成,并分析了各种精制技术发展的关键问题。     

生物质快速热解制备液体燃料

本文回顾了生物质快速热解液化技术的国内外研究现状,重点叙述了初级生物油的化学组成和燃料性质,指出生物油是一种复杂的含氧有机混合物,具有水分含量高、氧含量高、热值低、酸含量高、安定性差和化石燃油不互溶等独特的性质;针对这些性质,介绍了几种常用的生物油精制提炼方法,包括催化裂解、催化加氢、高温热解气过滤、添加助剂、催化酯化、柴油乳化以及制备富氢合成气与费托合成,并分析了各种精制技术发展的关键问题.     

生物质快速热解制备液体燃料

本文回顾了生物质快速热解液化技术的国内外研究现状,重点叙述了初级生物油的化学组成和燃料性质,指出生物油是一种复杂的含氧有机混合物,具有水分含量高、氧含量高、热值低、酸含量高、安定性差和化石燃油不互溶等独特的性质;针对这些性质,介绍了几种常用的生物油精制提炼方法,包括催化裂解、催化加氢、高温热解气过滤、添加助剂、催化酯化、柴油乳化以及制备富氢合成气与费托合成,并分析了各种精制技术发展的关键问题.     

生物质铁盐催化加氢热解产生生物油与气态烃的研究

利用加压固定床反应器进行了松木催化加氢热解实验(终温600-700℃、氢压5.0 MPa),考察了硝酸铁和硫酸亚铁两种铁盐对热解产物产率及分布的影响。研究发现,Fe(NO_3)_3能够显著促进生物炭加氢生成甲烷,碳转化率高达97.4%,CH_4产率达21.2%,无水生物油产率为32.8%(产率基准均为干燥无灰生物质),生物油中含氧量降低,轻质芳烃产率增加,其中,苯、甲苯和二甲苯(BTX)产率为2.6%。而FeSO_4迥异于Fe(NO_3)_3,具有抑制气态烃和生物油生成的作用。机理研究表明,Fe(NO_3)_3在加氢过程中主要形成α-Fe,并促使生物炭形成无定型和多孔结构,从而有利于其加氢生成甲烷,而FeSO_4则部分转化为Fe_2S_3,由此可致使铁催化剂失活。     

多孔骨架固定分子催化剂催化CO2加氢制备甲酸研究进展

近年来, 大气中CO₂含量急剧增加, 导致了严重的温室效应. 将CO₂作为C1资源转化为燃料或精细化学品引起了越来越多的关注. 开发高效、 稳定、 可回收利用的催化剂成为CO₂资源化利用的关键. 在众多的CO₂加氢催化剂中, 功能性多孔骨架材料固定型分子催化剂展示出优异的性能, 成为研究的热点之一. 功能性骨架材料, 如多孔有机聚合物(POPs)、 共价有机骨架(COFs)和金属有机骨架(MOFs), 具有比表面积大、 热稳定性高和可调性等特点, 在设计合成催化剂方面发挥着重要作用. 本文介绍了POPs/COFs/MOFs多孔骨架材料固定分子催化剂的开发及在催化CO₂合成甲酸领域的最新进展.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.