可溶性导电聚苯胺的研究进展

本文综述了可溶性导电聚苯胺的研究进展，评述了制备水溶性导电聚苯胺的各种方法，指出了水溶性聚苯胺的研究方向。     

可溶性导聚苯胺的研究进展

本文综述了可溶性导电聚苯胺的研究进展，评述了制备水溶性导电聚苯胺的各种方法，指出了水溶性聚苯胺的研究方向。     

用共混和共聚法改性聚苯胺及其电流变液的研究

通过共混和表面接枝共聚两种方法改性聚苯胺，制备聚苯胺（ＰＡｎ）复合粒子并用它们组成活性较高的电流变（ＥＲ）液．研究了ＰＡｎ复合粒子的结构与ＥＲ液性能的关系．结果表明在ＰＡｎ粒子表面涂覆聚乙烯醇或接枝聚丙烯酰胺等与ＰＡｎ能形成氢键或有化学键连接的绝缘物质可以既提高其ＥＲ液的电诱导屈服应力又降低漏电流密度．     

丙烯酰胺水溶性共聚体的醛交联

丙烯酰胺水溶性共聚体的醛交联曹维孝，江必旺，马筑平（北京大学化学与分子工程学院北京１００８７１）关键词　三元共聚体，丙烯酰胺，涤纶基印字版丙烯酰胺的均聚体是当今使用最广的水溶性高分子，在造纸、采油、污水处理、水质净化等方面均有应用［１］．我们在研制涤...     

N-[4-(磺酰胺)苯基]丙烯酰胺与丙烯腈、甲基丙烯酸甲酯共聚合的竞聚率

N-[4-(磺酰胺)苯基]丙烯酰胺(ASPAA)单体可以均聚或与其它单体共聚合成具有药理活性的聚合物，制成水溶性、毒副作用小、具有缓释作用的大分子药物．同时，由于磺酰胺基具有一定的碱溶性，ASPAA与丙烯酸酯类等单体的共聚物可用于制备可碱显影、显影宽容度和耐印力等性能良好的平印、计算机直接制版版材．有关ASPAA与其它单体共聚的竞聚率还鲜见报道．本文在合成ASPAA单体的基础上，对ASPAA／丙烯腈和ASPAA／甲基丙烯酸甲酯共聚的竞聚率进行了研究。     

聚合法制备无卤阻燃尼龙的研究进展

在全球阻燃材料无卤化的推进过程中,氮系、磷系、硅系等阻燃剂以及其复配物受到各国研究人员的广泛关注。利用聚合法(原位聚合法和共聚法)制备阻燃尼龙,可有效解决共混法中常存在的阻燃剂在基体中分散不均匀而导致的材料性能下降的问题。原位聚合法和共聚法是根据阻燃成分在基体中的存在方式而区分的,通常前者以物理均匀分散为主,后者多以化学键结合。本文在不同制备方法的背景下,根据阻燃剂类别进一步细分,综述了用原位聚合法和共聚法制备无卤阻燃尼龙的相关研究,并探讨了该领域中亟待解决的问题及未来发展方向。     

在线紫外-可见光谱研究ITO导电玻璃电极上苯胺与对苯二胺的电化学共聚及其产物的表征

本文用在线紫外-可见光谱电化学的方法较详细地研究了在0.5M硫酸水溶液中苯胺、对苯二胺以及苯胺与对苯二胺混合体系在ITO导电玻璃电极上的电化学聚合和共聚合的过程。苯胺与对苯二胺在ITO导电玻璃上发生了电化学共聚合,在0.5M硫酸水溶液的纯苯胺和苯胺与对苯二胺共聚时的循环伏安曲线以及其对应的在线紫外-可见光谱表明对苯二胺的加入除了发生共聚外,也使聚合的速率明显加快;而且纯苯胺在循环伏安电化学聚合时在430nm处出现的吸收带因对苯二胺的加入而消失,说明对苯二胺的加入使聚合的机理与纯苯胺的聚合机理有明显不同,主要原因是苯胺产生的反应中间体可能很快与对苯二胺的阳离子自由基反应聚合。在导电玻璃ITO上的聚合物膜的反射傅立叶红外光谱表明,对苯二胺的加入可能产生了具有1,2取代模式结构,这说明了对苯二胺结合进入到聚合物中。这种共聚使得产物的表面形貌也发生了变化,聚合物扫描电镜图表明对笨二胺的加入有利于纤维状的表面形貌产生,纤维的直径可达到50nm粗细;同时用在线紫外-可见光谱研究了纯聚苯胺和共聚物随电位变化的电变色性质,结果表明在0v-0.6v之间共聚物与纯聚苯胺的在线紫外-可见光谱有明显的不同,且共聚物的电变色可逆性比纯聚苯胺好;同时SEM图也表明在0.8v电位下聚苯胺和共聚物表面形貌发生了团聚。     

自由基共聚合教学中需要说明的几个问题

自由基共聚合主要讲授二元共聚组成及其控制、共聚类型及行为曲线、单体和自由基相对活性等核心模块。本文对共聚中几个难点内容,如二元共聚类型、二元共聚行为类型、二元共聚曲线、二元共聚组成、二元共聚物结构表征等进行解析,对教材内容进行补充讨论,期望培养学生发现问题、解决问题的能力和创新思维。     

聚丁二酸丁二酯的合成、共聚改性及功能化研究进展

聚丁二酸丁二酯(PBS)因具备良好的物理性能和加工性能而备受关注,是最具有前途的生物降解材料之一。本文总结了PBS材料合成、共聚改性及其功能化方面的研究进展。无规共聚、嵌段共聚等方法可以调节材料的力学性能、生物降解性能、热性能和结晶行为。通过与聚富马酸丁二酯无规共聚或者嵌段共聚,可以利用分子链上的双键高效引入磺酸根、羧酸、氨基等基团,提高材料的亲水性和生物相容性能,并制备PH响应性的电荷翻转胶束,拓展PBS在生物医药领域的应用。     

偏氯乙烯-丙烯腈悬浮共聚物的组成研究

研究了偏氯乙烯 丙烯腈 (VDC AN)悬浮共聚体系中AN的水溶性对单体相组成和树脂组成的影响 .结果表明 :由于AN部分地溶于水 ,使有机相AN的含量降低 ,导致共聚树脂的组成明显地不同于本体聚合模型的计算预测值 .为了准确地计算预测VDC AN共聚树脂的组成 ,本文假设溶于水的AN向有机相迁移的速度比聚合反应速度快得多 ,AN在两相的溶解分配近似为平衡态 .计算中先用描述AN在VDC/水系统中溶解分配的Marker式校正有机相AN的含量 ,然后根据校正后的AN含量用Mayo Lewis式计算预测VDC AN悬浮共聚物的组成 ,计算中有关的竞聚率值取自于文献中本体聚合的值 .计算结果与实验值一致     

ELECTROCHEMICAL COPOLYMERIZATION OF ANILINE AND AZURE B*

The electrochemical copolymerization of aniline and N,N,N'-trimethylthionin (azure B) in aqueous solutions hasbeen carried out using the potential sweep method, The optimum conditions for the coelectrodeposition are that the pH valueand the temperature of the electrolytic solution are controlled at 5.57 and 30℃, respectively, and the scan potential range isset between - 0.25 and 1.10 V (versus SCE). The copolymerization rate of aniline and azure B is about 3 times larger thanthat of aniline in the absence of azure B. The copolymerization of aniline and azure B was verified from the results of visiblespectra during electrolysis, FTIR spectra and the atomic force microscopy (AFM) images of the polymers. The in situ visiblespectrum for the electrolysis of the solution containing aniline and azure B is different from that of the respective aniline andazure B. The FTIR spectrum of the copolymer is not a superposition of that of polyaniline and poly(azure B). The AFMimage of the copolymer is different from those of polyaniline and poly(azure B) and is not a mixture of individual polymers.The conductivity of thc copolymer synthesized at pH 5.57 is four orders of magnitude higher than that of polyanilinesynthesized under the same conditions, bat in the absence of azure B. The clectrochemical properties of the copolymer aremainly attributed to polyaniline, but the copolymer has a better electrochemical reversibility and a much faster charge transferthan those of polyaniline.     

苯胺在十二烷基苯磺酸/水体系中的乳液聚合过程研究

利用光学显微镜和扫描电镜,对以水为介质、十二烷基苯磺酸(DBSA)为乳化剂的苯胺乳液聚合过程进行监测,发现苯胺在水体系中与DBSA反应形成DBSA-苯胺盐的棒状聚集结构,讨论了DBSA、苯胺、氧化剂的配比及浓度对聚合过程中棒状聚集结构的长度和数量及生成聚苯胺的电导率的影响,提出苯胺在DBSA/水体系中的乳液聚合反应是在胶束表面进行的,而棒状聚集结构中的DBSA-苯胺盐单体经水相扩散到乳胶粒子中,形成颗粒状的聚苯胺.     

Chemical synthesis and electric properties of the conducting copolymer of aniline and o‐aminophenol

A copolymer, poly(aniline‐co‐o‐aminophenol), was prepared chemically by using ammonium peroxydisulfate as an oxidant. The monomer concentration ratio of o‐aminophenol to aniline strongly influences the copolymerization rate and properties of the copolymer. The optimum composition of a mixture for the chemical copolymerization consisted of 0.3 M aniline, 0.021 M o‐aminophenol, 0.42 M ammonium peroxydisulfate, and 2 M H₂SO₄. The result of cyclic voltammograms in a potential region of ?0.20 to 0.80 V (vs.SCE) indicates that the electrochemical activity of the copolymer prepared under the optimum condition is similar to that of polyaniline in more acid solutions. However, the copolymer still holds the good electrochemical activity until pH 11.0. Therefore, the pH dependence of the electrochemical property of the copolymer is improved, compared with poly(aniline‐co‐o‐aminophenol) prepared electrochemically, and is much better than that of polyaniline. The spectra of IR and ¹H NMR confirm that o‐aminophenol units are included in the copolymer chain, which play a key role in extending the usable pH region of the copolymer. The visible spectra of the copolymers show that a high concentration ratio of o‐aminophenol to aniline in a mixture inhibits the chain growth. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5573–5582, 2007     

苯胺与邻甲氧基苯胺共聚的原位紫外-可见光谱电化学研究

运用循环伏安法(CV)和原位紫外-可见光谱电化学法研究了苯胺(AN)和邻甲氧基苯胺(OMA)单独聚合及二者共聚的电化学过程。在1.0 mol/L HCl溶液中,AN和OMA单独聚合及二者共聚时不同的电化学行为表明AN和OMA之间产生了共聚作用。原位紫外-可见光谱的研究表明,在AN与OMA的共聚过程中,AN和OMA首先分别被氧化生成其阳离子自由基,然后,AN和OMA的阳离子自由基与溶液中的AN和OMA单体发生交互反应产生混合二聚物中间体,在紫外-可见吸收光谱中对应于440 nm处的吸收峰。进一步研究发现,AN和OMA的共聚过程与溶液中各单体的浓度比有关,当混合溶液中OMA的浓度较大时,会对共聚产生抑制作用。采用红外光谱技术对共聚物进行了表征并初步探讨了共聚机制。结果表明,在AN和OMA共聚过程中,OMA分子掺杂进入AN聚合物骨架。     

Sulfonated polyanilines prepared by copolymerization of 3‐aminobenzenesulfonic acid and aniline: The effect of reaction conditions on polymer properties

Sulfonated polyanilines (SPANs) with sulfur‐to‐nitrogen ratios of 0.05–0.40 were prepared by the copolymerization of aniline (ANI) and 3‐aminobenzenesulfonic acid [metanilic acid (MA)] with ammonium peroxodisulfate in 1 M HCl at various MA/ANI and oxidant/monomer ratios and temperatures. The SPANs degree of oxidation, as ascertained from ultraviolet–visible and NMR spectra, and the SPAN bulk conductivity are inversely proportional to the content of MA units in the copolymer; that is, highly sulfonated SPAN samples are in a state closer to leucoemeraldine bases. The electron‐withdrawing and steric effects of sulfonic groups clearly have a great impact on the structural features of SPANs and, consequently, on their properties. It has been suggested that the low conductivity of SPAN in comparison with polyaniline may be related to the low content of quinoid units in the SPAN molecules. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3390–3398, 2000     

Effect of cations on polyaniline morphology

Nanostructured polyanilines of different morphologies were prepared by chemical polymerization of aniline with ammonium peroxodisulfate in aqueous HCl using various inorganic and organic chlorides as additives with the aim to determine the effect of cations of the added electrolyte on the morphology, spectroscopic characteristics, and conductivity of formed polyanilines. Chlorides of basic metals: NaCl and CaCl₂ did not show any significant effect while AlCl₃ and organic electrolytes were found to influence the morphology of polyanilines. The effect of organic-electrolyte additives, which actually are ionic liquids, is explained by the organization of their molecules to micellar structures that act as soft templates for emerging polyaniline nanoparticles. The effect of AlCl₃ is ascribed to the transformation of its molecules to [AlCl₄]^? anions.     

DL－丙交酯与2－氢－2－氧－1，3，2－二氧磷杂环己烷的开环共聚合研究

在三异丁基铝催化下ＤＬ－丙交酯与２－氢－２－氧－１，３，２－二氧磷杂环己烷开环共聚，制备了一类新型水溶性共聚物Ｐ（ＬＡ－ｃｏ－ＴＭＰ）。用１ＨＮＭＲ、ＩＲ谱对其结构进行了表征，并研究了催化剂用量及不同单体配比对总转化率、共聚物组成及特性粘度的影响。     

Additive‐dependent iptycene incorporation in polyanilines: Insights into the pentiptycene clipping effect and the polymerization mechanism

Despite the long history of polyaniline chemistry, backbone‐substituted polyanilines are limited. Here, we report the synthesis of pentiptycene‐incorporated polyanilines through acidic aniline oxidative polymerization with three pentiptycene derivatives, TA, DA, and TP, as nucleate additives. The reactivity of TA > DA ? TP, as evidenced by structural and property analysis of the corresponding polyaniline products, demonstrates a radical coupling mechanism and the formation of Dewar π‐complex intermediates for the chain propagation. In addition, the iptycene substituent effect on enhancing the electrochemical stability and charge storage capability of polyaniline are discussed with a clip model, namely, the threading of neighboring polyaniline chains through the U‐ and V‐shaped cavities of pentiptycene restricts lateral motions of the polymer chains and promotes interchain conductivity. Density function theory (DFT) calculations suggest a larger clipping effect for the U versus V cavities. Both the conclusion of a terminal planar p‐phenylenediamine (ppda) group being the key component of an effective nucleate and the concept of interchain clipping for enhanced electrochemical performance should facilitate the design and synthesis of novel polyanilines for electronic applications.     

Micellar Copolymerization:the State of the Arts

Over the past two decades, hydrophobically modified water-soluble polymers (HMWSPs),particularly hydrophobically associating polyacrylamides (HAPAMs), have attracted increased interest owing to their practical and fundamental importance[1]. This system usually consists of a hydrophilic backbone with a small proportion (generally less than 2 mol %) of hydrophobic pendent groups. When dissolved in aqueous solutions, the apolar moieties tend to exclude water and are held together by intra- and intermolecular hydrophobic associations. This leads to a transitional network structure that induces a substantial increase in solution viscosity. Such viscosity-building ability is further elevated upon adding salt or increasing temperature due to the enhanced polarity.Additionally, the dynamic associating junctions can be ruptured upon high shear stress, but re-formed when the force ceases. All these unique properties enable HAPAMs attractiveness to various industrial uses in which the control of fluid theology is required.However, it is a great challenge to synthesize HAPAMs since acrylamide and hydrophobic comonomers are mutually incompatible. After attempts using heterogeneous, inverse emulsion,microemulsion, and precipitation copolymerization processes, the commonly accepted method is micellar free radical copolymerization in which an appropriate surfactant is used to solubilize the hydrophobic comonomer[2].In this paper, the sate of the arts for micellar copolymerization is comprehensively reviewed:1. the mechanism of micellar copolymerization;2. parameters affecting micellar copolymerization, including:(1) nature and level of hydrophobic comonomer;(2) nature and content of surfactant used;(3) initiator and temperature.3. structural characteristics of HAPAMs prepared via micellar copolymerization;4. properties of HAPAMs prepared via micellar copolymerization:(1) dilute solution properties;(2) semi-dilute solution properties.5. applications of micellar copolymerization.In short, the main goal of this review is trying to establish an interrelationship among .synthetic method, structure and properties, so as to give a guideline for "tailoring" the polymer structure to satisfy different specific end use.     

聚合介质酸度对聚苯胺的结构和性能的影响

不论电化学还是化学聚合,酸度对聚苯胺(PAn)的合成都有很大影响,说明只有在酸性条件下才能合成电活性的聚苯胺,鉴于聚合介质的酸度对聚苯胺的影响尚无详细的报道,本文研究了聚合介质酸度对聚苯胺的结构和性能的影响.