氯化原位接枝制备CPE-g-MMA接枝共聚物

氯化原位接枝制备CPE-g-MMA接枝共聚物;接枝共聚物结构;氯化原位接枝;力学性能     

接枝共聚的接枝参数表述方法的探讨

介绍了接枝共聚物接枝参数，如单体转化率、接枝率、接枝效率、均聚物含量及接枝频率，概述了对这些参数在进行表述淀粉接枝共聚时出现的种各种表达形式。在此基础上，指出了这些其在表达上出现的混乱现象。     

PP固相接枝改性研究进展

聚丙烯(PP)是一种具有优异性能且价格低廉的通用高分子材料,但由于聚丙烯为非极性聚合物,其染色性、亲水性、粘结性等均较差,且与其它材料的相容性也很差,这些缺点限制了聚丙烯的应用。通过固相接枝法改性聚丙烯,不仅可以在保持聚丙烯原有优异性能的情况下引入极性官能团,而且具有低温、低压、低成本、较高的接枝率和无需溶剂回收等优点。本文简要介绍了PP固相接枝反应机理,从接枝单体角度综述了近几年PP固相接枝改性的研究进展,并讨论了反应工艺对接枝产物的接枝率、接枝效率和性能的影响。     

马来酸酐-苯乙烯多组分单体熔融接枝高密度聚乙烯机理及性能研究

用单螺杆挤出机制备了马来酸酐-苯乙烯(MAH-St)多单体熔融接枝高密度聚乙烯(HDPE)体系,研究发现添加St共同接枝,可以显著提高接枝物的接枝率.随着St的增加,接枝率先增大后有所降低.当两种单体物质的量比约为1:1时,接枝物的接枝率最高,此时接枝物的熔体流动速率(MFR)最小.即MAH接枝率越高,接枝物的MFR越...     

球形聚丙烯粒子固相接枝苯乙烯的研究

用负载型高效球形催化剂催化丙烯本体聚合获得了孔隙率较高的球形聚丙烯 (PP)粒子 .研究了苯乙烯在这种球形多孔PP粒子中的接枝聚合反应 ,考察了各种聚合条件对接枝率及接枝效率的影响 ,并用FTIR、DSC、GPC、粘度测定及偏光显微镜 (PLM)等方法表征了接枝聚合产物的结构和形态 .研究表明 ,球形PP粒子固相接枝苯乙烯不仅可达较高接枝率 (最高达 2 4 % )和接枝效率 (最高达 5 6 7% ) ,PS相区尺寸小、分布均匀 ,而且产物为形态规则的球形颗粒 ,有利于防止聚合物结块和粘壁 .但PP接枝PS后分子量有所下降 ,表明PP接枝PS的同时伴随着轻微的降解     

无规聚丙烯接枝甲基丙烯酸的合成

采用溶液聚合的方法将无规聚丙烯 (APP)与甲基丙烯酸 (MAA)接枝共聚制得接枝共聚物APP -g -MAA。讨论了反应温度、反应时间、引发剂BPO浓度、单体MAA浓度对接枝率的影响。结果表明 :当聚合反应温度低于是 12 0℃时 ,接枝率随温度升高而降低。延长反应时间有利于提高接枝率。最适宜的引发剂浓度为 1% ,MAA/APP配比为 0 .2 5/1。利用红外光谱证实了接枝物APP-g -MAA的存在。     

1,6-己二醇二丙烯酸酯和苯乙烯多单体熔融接枝制备长支链聚丙烯研究

采用哈克转矩流变仪制备了1,6-己二醇二丙烯酸酯(HDDA)和苯乙烯(St)多单体熔融接枝聚丙烯(PP)体系.红外测试结果表明St的加入能够促进HDDA接枝到PP主链,提高接枝率.动态流变行为研究结果也表明采用多单体熔融接枝PP更有利于体系在熔融接枝中生成长支链(LCB).随着St单体添加量的增加,HDDA的接枝率增大...     

原生态聚丙烯等离子处理接枝甲基丙烯酸甲酯

将等离子体接枝技术，用于原生态聚丙烯接枝甲基丙烯酸甲酯共聚物的合成，ＦＴ－ＩＲ证明所得产物为接枝共聚物，研究了不同等离子体处理功率，时间，不同接枝聚合反应时间，温度对接枝的影响，以及稀释剂、聚丙烯粒度对接枝的影响，结果表明，接枝过程中有自动加速现象，稀释剂亦使接枝有加速效应，接枝过程为扩散控制过程。     

基于“透过表面接枝”方式制备低分散性和高接枝密度聚合物刷的研究

"透过表面接枝"(grafting-through)是一种聚合物表面改性的新方法,可以显著改善传统grafting-from和grafting-to方法接枝工艺的缺陷,获得兼具高接枝密度和低分散性的聚合物刷产物.本文采用布朗动力学模拟方法,模拟研究了grafting-through方法接枝聚合物刷过程中的主控因素,从微观动力学角度阐明其特有的链增长趋同化效应是保持产物聚合物刷较低分散性的主因.引发效率在grafting-through中可显著提高,且产物聚合物刷的分子量呈现泊松分布.此外,反应中保持高的单体通量,可以同时实现产物聚合物较长的平均链长和较低的分散性,有利于制备性能优异的改性材料.该研究对深入理解grafting-through接枝过程的动力学主控因素,促进grafting-through技术的推广和工艺的改进具有一定的理论指导意义.     

壳聚糖接枝共聚改性最新研究进展

壳聚糖是一种天然高分子,也是迄今为止唯一发现的阳离子碱性多糖。壳聚糖分子链中富含羟基和氨基等反应性官能团,具有生物相容性、生物可降解性、抗菌性、无细胞毒性等优良性能,在生化、医药、环保、农业等领域有广泛的应用前景。然而,由于其大分子具有较好的立构规整性和较强的氢键作用,除稀盐酸、稀醋酸外,壳聚糖不溶于水和其它有机溶剂,因而限制了它的应用范围。为了扩大其应用领域,常通过接枝共聚反应来改善壳聚糖的性能。本文介绍了壳聚糖接枝共聚改性的最新研究进展,包括自由基引发接枝法、偶联接枝法以及催化接枝法。     

Grafting onto Gelatin. II. Graft Copolymerization of Ethyl Acrylate and Methyl Methacrylate onto Gelatin in the Presence of Ce4+ as Redox Initiator

In order to initiate a comprehensive study of graft copolymerization of vinyl monomers onto soluble protein-gelatin, we have studied grafting of ethyl acrylate (EA) and methyl methacrylate (MMA) onto gelatin using eerie ammonium nitrate (CAN) and eerie ammonium sulfate (CAS) as the redox initiator in an aqueous medium. A small amount of mineral acid (HNO₃ with CAN and H2SO4 with CAS) was found to catalyze the graft copolymerization. Graft copolymerization reactions were carried out at different temperatures. Maximum grafting occurred at 65°C both with EA and MMA. Percentage grafting has been determined as function of 1) concentration of monomer (EA and MMA), 2) concentration of initiator (CAN and CAS), 3) concentration of acid (HNO3 and H2SO4), 4) time, and 5) temperature.     

Graft copolymerization of ethyl acrylate onto gelatin using hydrogen peroxide and ascorbic acid in aqueous medium

Gelatin a derived protein from collagen can be modified at 60°C by allowing it to react with ethyl acrylate by use of a novel initiator technique. The polymeric ethyl acrylate side chain is chemically bonded to gelatin. The effects of synthetic variable in the graft copolymerization reactions have been discussed in the light of percent grafting, grafting efficiency, and the rate of polymerization.     

Grafting copolymerization of styrene and maleic anhydride binary monomer systems induced by UV irradiation

Photografting copolymerization of maleic anhydride (MAH) and styrene (St) onto LDPE film was investigated by using a one-step method, and further thermally induced grafting copolymerization of them was carried out by using a two-step method. Regarding the photografting copolymerization of MAH/St binary monomer system, both conversion percentage (CP) and grafting efficiency (GE) increased with raising the content of MAH in the monomer feed. In addition, the content of MAH in the grafted copolymers also increased with increasing the fraction of MAH in the monomer feed. The formation of LDPE-g-P(MAH-co-St) grafted film was identified by FTIR and ESCA spectroscopy. In the case of grafting copolymerization of MAH/St by the two-step method, grafting copolymerization proceeded slowly compared with the non-grafting copolymerization. The apparent activation energy (E_a) for the non-grafting copolymerization in the solution and the grafting copolymerization on LDPE film was 24 and 82 kJ/mol, respectively, which were noticeably lower than those of MAH/vinyl acetate (MAH/VAC) binary monomer system under the similar grafting conditions. These data of E_a explained why the grafting copolymerization of styrene/MAH took place faster than that of MAH/VAC binary monomer system. The composition of the grafted copolymer chains was largely affected by the composition of the monomer feeds; however, the composition of the non-grafted copolymers nearly remained at 1/1 even in systems with largely different MAH/styrene ratios in monomer feeds. It is indicated that the non-grafting copolymerization proceeded predominantly following alternating copolymerization, but the grafting copolymerization performed random copolymerization.     

原生态聚丙烯等离子体处理接枝甲基丙烯酸甲酯

将等离子体接枝技术，用于原生态聚丙烯接枝甲基丙烯酸甲酯共聚物的合成。ＦＴ－ＩＲ证明所得产物为接枝共聚物，研究了不同等离子体处理功率、时间，不同接枝聚合反应时间、温度对接枝的影响，以及稀释剂、聚丙烯粒度对接枝的影响。结果表明，接枝过程中有自动加速现象，稀释剂亦使接枝有加速效应。接枝过程为扩散控制过程。     

明胶与丙烯酸乙酯接枝共聚的SDS-聚丙烯酰胺凝胶电泳研究

明胶与丙烯酸乙酯接枝共聚的ＳＤＳ－聚丙烯酰胺凝胶电泳研究刘孝恒,阎天堂（中国科学技术大学近代化学系,合肥,２３００２６）关键词接枝,明胶,组分,平均分子量,电泳在天然高分子接枝改性的研究中,有关明胶的报道已有不少［１～６］,其中多数采用常规定量分析法...     

Graft copolymerization onto jute fiber: Ceric ion-initiated graft copolymerization of methyl methacrylate

Graft copolymerization of methyl methacrylate (MMA) was carried out on both defatted and bleached jute fibers using ceric ammonium sulfate (CAS) as the initiator. In order to obtain the optimum condition for grafting, the effects of initiator concentrations, temperature, time of reaction, lignin content of jute, and the monomer concentration were studied. The maximum percent grafting and grafting efficiency were found to be 132% and 0.71, respectively. Kinetic studies showed that at 0.03M CAS, the reaction appeared to obey the second-order process. The activation energies were found to be 7.74 and 5.12 kcal/mole for defatted (lignin content, 15.7%) and chlorite-bleached jute (lignin content 10%), respectively. The activation energies of graft copolymerization of MMA onto jute fiber are compared with the energies of activation of graft copolymerization of acrylonitrile (AN).     

Effect of dimethylaminoethyl methacrylate on the graft copolymerization of ethyl acrylate onto hydroxypropyl methylcellulose in aqueous medium

Graft copolymerization of an ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) monomer mixture onto water-soluble hydroxypropyl methylcellulose was investigated with potassium persulfate (KPS) as the initiator in an aqueous medium. The effects of introducing DMAEMA onto the graft copolymerization and the properties of the resulting latex that was produced were studied systematically. The optimum conditions for the graft copolymerization in terms of percentage of grafting and grafting efficiency were determined. The graft copolymer was characterized by Fourier transform infrared spectra, elemental analyses, nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering methods. The results suggest that the introduction of the DMAEMA monomer clearly accelerates the initial rate of the graft copolymerization, whereas the grafting parameters decrease significantly with increasing amounts of DMAEMA. These results can be attributed to the relatively large size of the DMAEMA molecule, its redox reaction with KPS, its hydrophilicity in water, and its chain transfer effect. The equilibrium humidity adsorption behavior and acid solubility of graft the copolymer films were also studied.     

Graft Copolymerization of Poly(ethyl Acrylate) onto Wool in the Presence of Ceric Ammonium Nitrate as Redox Initiator

Poly(ethyl acrylate) has been grafted onto Himachali wool in an aqueous medium by using ceric ammonium nitrate (CAN) as redox initiator. Copolymerization was studied at five different temperatures: 40, 45, 50, 55, and 60°C. Maximum grafting occurred at 45°C. Nitric acid was found to catalyze the graft copolymerization reactions. Percentage and efficiency of grafting were found to be dependent upon concentrations of CAN (initiator) and of monomer. Percentage of grafting has been determined as function of time, and from the slope of percent grafting versus time plot, the initial rate of graft copolymerization (R) has been determined.     

聚氯乙烯-丙烯酸丁酯接枝共聚物的结构表征

以通用聚氯乙烯(PVC)和脱氯化氢PVC树脂为基体,采用悬浮溶胀接枝共聚法合成聚氯乙烯-丙烯酸丁酯接枝共聚物,对脱氯化氢PVC和接枝共聚物的结构进行了表征.结果表明,以碱液为介质加热PVC能脱除少量氯化氢,得到以链节数为2,3,4的共轭双键为主的不饱和结构,而树脂的分子量变化不大;在相同接枝反应条件下,采用脱氯化氢PVC与丙烯酸丁酯接枝共聚可以提高接枝率和接枝效率;PVC接枝共聚物的特性粘度随接枝率增加而增加,其重均分子量和分子量分布指数均大于接枝所用的PVC树脂.     

可聚合的光引发转移终止剂合成接枝共聚物

采用一种可聚合的光引发转移终止剂 ,2 N ,N 二乙基二硫代氨基甲酰氧基乙酸 β 甲基丙烯酰氧基乙酯 (MAEDCA) ,通过两种途径制备了含有聚甲基丙烯酸甲酯 (PMMA)和聚苯乙烯 (PSt)链段的接枝共聚物 .其一是将MAEDCA作为引发剂 ,在紫外光照射下引发MMA聚合 ,得到大分子单体 ,通过大分子单体与St的共聚合得到 .考察了所用大分子单体的分子量和浓度对共聚合的影响 .其二是将MAEDCA作为单体与MMA共聚得到侧链上含有N ,N 二乙基二硫代氨基甲酰氧基 (DC)基团的无规共聚物 ,P(MMA co MAEDCA) .在紫外光照射下 ,P(MMA co MAEDCA)作为大分子引发剂引发St聚合 ,得到P(MMA co MAEDCA) g PSt的共聚物 ,研究了接枝共聚合过程的活性自由基聚合特征