基于静电纺丝技术的多级结构聚合物纳米纤维复合材料的研究进展

静电纺丝技术是目前制备纳米纤维最重要的方法之一,以其制备的纤维具有直径可控、比表面积大、孔隙率高等优点,因而被广泛应用于过滤、催化、传感器及生物医学等众多领域.以静电纺丝纤维为模板可进一步构建多级结构的功能性聚合物纳米纤维复合材料,拓宽其应用范围.本文着重概述了近年来基于静电纺丝技术的简单共混型、核壳结构及多级结构的聚合物纳米纤维复合材料的制备、结构及性能,并展望了其应用研究前景.     

静电纺丝纳米纤维膜固定化酶及其应用*

静电纺丝是一种简单有效的制备聚合物纳米纤维的技术,在组织工程、药物控释和传感器等方面具有广泛的应用。采用静电纺丝技术制备得到的纳米纤维膜具有比表面积大、孔隙率高和易于分离回收等优点,可以作为一种优良的酶固定化载体,目前在酶固定化领域受到了广泛的关注。本文综述了近年来静电纺丝纳米纤维膜固定化酶的研究进展,在阐述静电纺丝纳米纤维膜制备技术的基础上,详细介绍了纳米纤维膜表面担载法和包埋法固定化酶的原理和方法,分析了不同固定化方法的优缺点,并讨论了静电纺丝纳米纤维膜固定化酶的应用前景,对静电纺丝纳米纤维膜固定化酶的发展方向进行了展望。     

聚合物的静电纺丝

静电纺丝法是聚合物溶液或熔体在静电作用下进行喷射拉伸而获得纳米级纤维的纺丝方法.由纳米纤维制得的无纺布,具有孔隙率高、比表面积大、纤维精细程度与均一性高、长径比大等优点,从而赋予了静电纺丝纤维广泛的应用前景,它已在国内外引起了广泛的关注.本文介绍了静电纺丝的装置、基本原理及静电纺丝制备纳米纤维的研究进展,同时也叙述了其在各个领域的应用,最后展望了静电纺丝制备纳米纤维的发展方向及前景.     

静电纺丝技术制备聚合物基中空结构材料

静电纺丝是一种制备纳米尺度连续长丝的技术, 采用静电纺丝技术高效可控地构筑微纳米中空结构材料备受关注. 本文综述了通过静电纺丝技术制备聚合物中空纤维和中空微球的研究进展, 展望了其在不同功能材料领域的发展前景.     

银纳米粒子与氧化物纳米异质结构制备及应用

总结了近期银纳米粒子与氧化物纳米异质结构制备及应用研究进展情况,特别是银纳米粒子修饰的氧化钼纳米纤维异质结构、银纳米粒子修饰的钛酸盐纳米纤维异质结构、银纳米粒子@二氧化硅@银纳米粒子三明治异质结构的制备方法与性能表征.介绍了以上三种异质纳米复合结构的催化性能和银纳米粒子修饰的二氧化物纳米纤维异质结构的气体传感性能.     

取向静电纺丝纳米纤维的制备及应用研究进展

简单描述了静电纺丝的基本装置、原理;为制得高性能的取向纳米纤维,对静电纺丝中出现的不稳定性进行了研究,介绍了三种不稳定状况,并分析了其产生原因.列举了通过改变接收装置、控制电场和附加磁场等方法,改进静电纺丝技术来制取连续取向的纳米纤维,并对各种方法进行了简单的评价,指出磁化静电纺丝(MES)是目前制备取向纳米纤维最具有发展前景的方法.简要介绍了取向纳米纤维在生物组织工程领域方面的应用,并对其未来作了展望.     

定形相变复合材料的研究进展——静电纺丝法

静电纺丝是制备定形相变复合材料的重要方法之一,本文综述了静电纺丝法制备定形相变复合材料的研究进展,主要包括溶液静电纺丝、溶液-溶液同轴静电纺丝、熔融-溶液同轴静电纺丝和静电纺纳米纤维膜物理吸附等,总结了静电纺丝常用的固-液相变材料(如脂肪族长链烷烃、大豆蜡、脂肪酸及其二元低共熔物、脂肪酸酯和聚乙二醇等)和支撑材料(如醋酸纤维素、聚对苯二甲酸乙二醇酯、聚乙烯吡咯烷酮、聚偏氟乙烯、聚乳酸、聚氨酯、聚酰胺6、聚丙烯腈及其碳纳米纤维等)。     

静电纺丝制备醋酸纤维素复合纳米纤维的研究进展

静电纺丝技术就是通过带电聚合物溶液或熔体的喷射来制备纳米纤维,是一种制备纳米纤维材料简单有效的技术。醋酸纤维素(CA)易溶于有机溶剂,常作为纤维素的替代材料应用于静电纺丝领域。本文总结了近年来国内外采用静电纺丝技术制备CA复合纳米纤维的研究新进展,重点介绍了CA/CNTs复合纳米纤维、CA/金属粒子复合纳米纤维、CA/金属氧化物复合纳米纤维、CA基载药复合纳米纤维、CA/PAN复合纳米纤维、CA/PVA复合纳米纤维、CA/CS复合纳米纤维等CA复合纳米纤维的研究进展以及潜在的应用领域。     

静电纺丝制备杯芳烃功能化纳米纤维的应用

静电纺丝技术是制备连续微纳米纤维的一种简单易行且高效的方法,所制备的纳米纤维因其独特的结构尺寸和广泛的应用领域而备受材料科学界的青睐。 作为第三代超分子主体化合物的杯芳烃及其衍生物因其独特的分子结构、优异的离子选择识别性和吸附性能而显示出广阔的应用前景。 本文简述了静电纺丝制备杯芳烃功能化纳米纤维的原理,系统地探讨了其作为吸附剂和催化剂载体的应用以及静电纺丝与杯芳烃相结合的优势。 讨论了目前静电纺丝制备杯芳烃功能化纳米纤维存在的问题,对未来的发展方向进行展望。     

静电纺丝法在制备改性醋酸纤维素中的应用

纤维素是一种天然存在于有机物或植物中储量巨大的可再生资源。醋酸纤维素是在催化剂的作用下,将纤维素的羟基酯化而得到的一种热塑性树脂。由于其具有稳定,易于加工,不易燃烧,生物可降解性等特点,常用来替代天然纤维素作为静电纺丝的原料。静电纺丝技术作为目前制备纳米纤维材料的一种简单有效的方法,近些年来一直备受关注。本文系统介绍了以醋酸纤维素为静电纺丝的基体材料, 通过添加纳米粒子、聚合物溶液、表面改性、同轴电纺等物理改性方法以及再生纤维处理和硝化反应等化学改性方法制备改性醋酸纤维素纤维, 讨论了改性后的新材料结构和性能等多方面的变化。综述了近几年来国内外关于以静电纺丝法制备改性醋酸纤维素纤维的研究进展以及其在生物医药、组织工程支架、过滤膜以及功能性织物等方面的应用前景。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.