钕三元配合物-聚氨酯发光材料的合成与荧光性能研究

在无水乙醇中,以1,10-邻菲啰啉和酒石酸为配体,合成了钕-酒石酸-邻菲啰啉三元稀土配合物;利用三元稀土配合物中的两个-OH作为多元醇的活性基团,以二丁基二月桂酸锡为催化剂,与具有活性基团-NCO的甲苯-2,4-二异氰酸酯反应制备新的键合型含稀土及高分子的发光材料.通过元素分析、EDTA配位滴定分析、红外、紫外、热分析和荧光光谱分析,测定了三元配合物及发光材料的组成、结构、热稳定性和发光性能.结果表明,酒石酸中的羧基以桥联方式与钕发生配位,phen与稀土离子之间的能量传递是主要过程,配合物的最大吸收与pben相比略有红移;在207nm波长激发下,三元配合物及发光材料在440和527nm处均能发出较强的特征荧光,预计在新型有机电致发光器件(OLEDS)和发光油漆方面有着广阔的应用前景.     

过渡金属离子与3-氟邻苯二甲酸和1,10-邻菲啰啉配合物的合成、结构及性质

过渡金属离子与3-氟邻苯二甲酸(H2Fpht)、1,10-邻菲啰啉(phen)通过水热反应得到了5个配合物:[M(Fpht)(phen)(H2O)3]·H2O(M=Ni 1,Co 2),[Cu(Fpht)(phen)(H2O)]·H2O(3),[M(Fpht)(phen)(H2O)]·H2O(M=Zn 4,Cd 5)。通过X-射线单晶衍射分析、元素分析、红外分析、荧光分析以及差热-热重分析对配合物进行了表征。配合物1和2为单核分子,中心离子Ni(Ⅱ)和Co(Ⅱ)与3-氟邻苯二甲酸根的1个氧原子,1,10-邻菲啰啉的2个氮原子以及3个配位水分子的3个氧原子配位,形成六配位的扭曲八面体构型。配合物3为Z字形一维链状结构。中心Cu(Ⅱ)离子与2个3-氟邻苯二甲酸根的2个氧原子,1个1,10-邻菲啰啉的2个氮原子以及水分子的1个氧原子配位,形成四方锥构型。配合物4和5具有相似的一维螺旋结构,中心Zn(Ⅱ)和Cd(Ⅱ)离子与2个3-氟邻苯二甲酸根的3个氧原子、1,10-邻菲啰啉的2个氮原子以及水分子中的1个氧原子配位,形成扭曲的八面体构型。     

铽、镝-3-噻吩乙酸二元、三元配合物的合成及表征

合成了四种新型的铽、镝的二元、三元配合物.通过元素分析、EDTA配位滴定分析表明其通式为RETh3·2H2O,RETh3phen(RE=Dy,Tb;Th=3-噻吩乙酸根;phen=1,10邻菲啰啉);对配合物进行了紫外光谱、红外光谱、荧光光谱、热重分析.结果表明,二元配合物在100℃左右失去结晶水,三元配合物具有较好的稳定性;在TbTh3phen中,3-噻吩乙酸和邻菲啰罗啉能很好地将能量传递给Tb3+离子,Tb3+离子546nm绿色荧光发射峰最强.     

1H-苯并三唑-1-乙酸稀土配合物的合成、表征及性质

溶液法合成了铕、铽与1H-苯并三唑-1-乙酸及1,10-邻菲啰啉的稀土配合物。通过元素分析、稀土配位滴定、摩尔电导、红外光谱、紫外光谱等手段对配合物进行了表征。结果表明,配合物的可能组成为Ln(L)3phen(Ln=Eu(III),Tb(III);HL=1H-苯并三唑-1-乙酸,Hbtaa;phen=1,10-邻菲啰啉)。利用荧光光谱、热分析和电化学方法讨论了配合物性质。荧光光谱表明配合物均有较好的发光性能。     

5-甲基苯并三唑-1-乙酸铕三元配合物的合成及表征

以5-甲基-苯并三唑-1-乙酸和1,10-邻菲啰啉为配体,采用溶液法合成了一种铕配合物。通过元素分析、配位滴定、摩尔电导率、红外光谱和紫外光谱对其进行表征。其组成可能为Eu(L)3phen·3.5H2O(HL=5-甲基-苯并三唑-1-乙酸,5-mbtaa;phen=1,10-邻菲啰啉)。使用热分析和荧光光谱研究了配合物的性质。热分析结果显示:铕配合物具有较好的热稳定性。荧光光谱显示:该配合物发出Eu(Ⅲ)特征荧光,并且5-甲基-苯并三唑-1-乙酸是较好的敏化剂。     

新型2-取代苯基-1H-咪唑[4,5-f][1,10]邻菲啰啉基Ru(II)配合物的光电性质

为获取具有活性官能团的接枝型、高性能荧光传感配合物,合成了2-(4-氨基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(CImPB-NH2)、2-(4-羟基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(CImPB-OH)、2-(4-羧基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(CImPB-COOH)和2-(4-硝基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(CImPB-NO2)四种配体,借助紫外-可见(UV-Vis)吸收光谱、荧光(PL)光谱、循环伏安法(CV)和含时密度泛函理论(TD-DFT)对上述四种配体与过渡金属元素钌(Ru)所形成的配合物的光电性能进行研究.结果表明:四种配合物均在可见光区域有较强吸收,发光范围覆盖绿色到红色光波段.在极性溶剂N,N-二甲基甲酰胺(DMF)中,以2-(4-氨基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉为配体所构建的钌配合物([Ru(CImPB-NH2)(bpy)2]2+的荧光量子产率(Φ)较不含咪唑环的5-氨基邻菲啰啉合钌([Ru(phen-NH2)(bpy)2]2+)的提高了67%,以2-(4-羧基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉所构建的钌配合物([Ru(CImPB-COOH)(bpy)2]2+)的Φ可达29.8%,是[Ru(phen-NH2)(bpy)2]2+的18倍.理论计算表明:配体中取代苯环、咪唑环和邻菲啰啉的稠环共平面,形成共价大π体系,其有效共轭长度较邻菲啰啉母体有显著增加,配合物是以Ru为中心的近似八面体构型,理论计算的电子吸收光谱和跃迁性质与实验结果相一致.上述研究有可能为接枝型、高性能荧光传感配合物的设计和筛选提供实验依据.     

1-(2-羟基苯基)-3-苯基-1,3-丙二酮及其铕(Ⅲ)配合物的合成和发光研究

以邻羟基苯乙酮和苯甲酰氯为原料, 经过酯化反应、 Fries重排合成了1-（2-羟基苯基）-3-苯基-1,3-丙二酮（HPPPD）及其与铕（Ⅲ）的配合物, 并通过IR, 热重-差热分析和^1H-NMR谱对其进行了表征. 研究了酚羟基的引入对稀土配合物发光性能的影响. 结果表明该配体与铕（Ⅲ）形成的配合物发出很强的铕（Ⅲ）的特征荧光, 并且以邻菲罗啉为第二配体的三元配合物的荧光强度明显高于二元配合物. 但是, 配体HPPPD与铽（Ⅲ）、钐（Ⅲ）和镝（Ⅲ）等形成的配合物, 无论是二元的, 还是三元的发光均很弱. 这是由于该配体的能级与不同稀土离子能级匹配程度的差别所致.     

稀土-姜黄素-菲啰啉配合物荧光和抑菌活性研究

合成了稀土与姜黄素和1,10-菲啰啉的稀土三元配合物和稀土与姜黄素的稀土二元配合物, 通过元素分析、摩尔电导、热重-差热分析、 IR 、 UV-Vis 和1H NMR方法, 确定配合物的化学组成分别为: REL3L′及REL3 · 2H2O (RE=Sm, Eu, Dy, L=姜黄素, L′=1,10-菲啰啉). 同时研究了配合物在室温下的荧光性质, 结果显示稀土三元、 二元配合物都表现出配体(L)的特征发射且发射强度大于配体(L), 三元配合物的荧光强于二元配合物. 抗菌活性试验结果表明, 稀土三元、 二元配合物对枯草杆菌和大肠杆菌都表现出很好的抑制作用, 而且稀土三元配合物REL3L′对所选菌种的抑菌性明显强于稀土二元配合物REL3 · 2H2O和配体姜黄素.     

3,4-二甲氧基苯乙酸邻菲啰啉镱(Ⅲ)配合物的合成、晶体结构及荧光光谱

合成了3,4-二甲氧基苯乙酸邻菲啰啉镱(Ⅲ)配合物(C84H82Yb2N4O24):[Yb2(DMPA)6(phen)2](HDMPA=3,4-二甲氧基苯乙酸(C12H12O4),phen=1,10-邻菲啰啉)(CCDC:757541),并通过元素分析、红外(IR)光谱、热重分析(TG-DTG)对其进行了表征,用单晶X射线衍射测定了配合物的晶体结构.配合物C84H82Yb2N4O24属三斜晶系,空间群P1,晶胞参数:a=1.22877(14)nm,b=1.23235(16)nm,c=1.45234(19)nm,α=91.726(7)°,β=103.321(7)°,γ=113.885(6)°,晶胞体积:V=1.9379(4)nm3,晶胞内分子数Z=1,相对分子质量Mr=1877.62,电子数F(000)=946,密度Dc=1.609g·cm-3,吸收系数μ(MoKα)=2.481mm-1.测定了铕和铽掺杂(2.5%,5.0%,10.0%,摩尔分数)的配合物的荧光光谱,结果表明,单独的配体没有荧光,在形成配合物后,依然显示铕(Ⅲ)离子和铽(Ⅲ)离子的特征发射峰,这表明配体将吸收的能量有效地转移给了中心离子,配体起到了很好的敏化作用.     

含有萘酰亚胺单元的铕配合物合成及其发光性能研究

通过在邻菲啉中性配体上引入萘酰亚胺发色团,合成了新型含有萘酰亚胺单元的铕配合物Eu(DBM)3(PNI-phen).通过控制激发,可以得到具有萘酰亚胺和Eu³⁺特征发射的荧光光谱.通过荧光光谱和激发光谱研究了铕配合物的能量传递及发光机制.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.