苯胺四聚体薄膜的制备及其电致变色性能

以苯胺四聚体做为电致变色材料, 在保持ITO有效涂覆面积不变的情况下, 通过控制溶液浓度和用量的方式控制膜厚, 采用自然铺展的方式制备得到了均匀的电致变色膜. 循环伏安特性曲线表明, 在－0.2～0.8 V电压范围内, 随着电压的升高, 苯胺四聚体结构发生从还原态到中间态再到氧化态的转变, 并伴随着颜色从浅黄色到绿色再到蓝色的变化. 研究发现, 电解质溶液种类和膜厚对苯胺四聚体膜的电致变色性能有较大影响. 苯胺四聚体膜的对比度按照HCl, HNO₃, H₂SO₄, LiClO₄电解质溶液的顺序依次降低. 随着膜厚度增加, 苯胺四聚体膜的对比度增加, 响应时间延长. 当采用樟脑磺酸掺杂的苯胺四聚体制备电致变色膜时, 在其他条件相同的情况下可以提高苯胺四聚体膜的对比度并同时缩短响应时间.     

(苯胺齐聚物-b-聚乙二醇)_3星型刚柔嵌段共聚物的合成

采用3种合成策略来制备(苯胺齐聚物-b-聚乙二醇)3三臂星型刚柔嵌段共聚物,获得了预期的目标产物.对每一种合成策略中各阶段的产物进行了结构表征,分析讨论了氧化偶联策略A和"先臂后核"缩合策略B的优点以及存在的问题,最终发展了简单、高效的"先核后臂"缩合策略C,即从均苯三甲酰氯和氨基/羧基封端苯胺四聚体出发,通过酰基化反应得到单分散的苯胺四聚体星型中间体M03,然后以1-乙基-(3-二甲基氨基丙基)碳酰二亚胺盐酸盐(EDCI)和4-二甲氨基吡啶(DMAP)为催化剂,使星型中间体M03与聚乙二醇单甲醚(m-PEG 550)经过脱水缩合反应得到(苯胺四聚体-b-聚乙二醇)3星型刚柔嵌段共聚物,并用红外光谱、质谱、核磁氢谱等进行了表征,表明所获得的产物与预期结构一致.     

聚苯乙烯-co-聚(2,3,4,5,6-五氟苯乙烯)共聚物: 合成及其多孔薄膜的制备

利用原子转移自由基聚合(ATRP)方法, 分别在三氟甲苯、含氟离子液体以及三氟甲苯/含氟离子液体混合溶剂体系中合成了聚苯乙烯-co-聚(2,3,4,5,6-五氟苯乙烯)(PS-co-PPFS)共聚物, 通过¹H NMR、¹⁹F NMR、元素分析以及凝胶渗透色谱法(GPC)对所得聚合物的分子链结构和组成进行了分析和表征. 随后, 利用静态呼吸图法分别在CS₂, CHCl₃ 和CH₂Cl₂ 中制备了有序多孔薄膜, 用扫描电子显微镜(SEM)观察其表面形貌, 并与利用分子量大小相当的聚苯乙烯均聚物(PS)制备的多孔薄膜进行了对比. 研究结果表明: 在三氟甲苯和含氟离子液体溶剂体系中, 均可利用ATRP 聚合方法获得窄分子量分布的PS-co-PPFS 共聚物(M_n＝5200～7900 g·mol^-1, i>M_w/M_n＝1.12～1.22). 对聚合物薄膜的扫描电子显微镜(SEM)观察和分析显示: 分别以CS₂, CHCl₃ 和CH₂Cl₂ 作为溶剂, 利用静态呼吸图法均可制备出PS-co-PPFS 共聚物多孔薄膜. 然而, 与在CHCl₃ 和CH₂Cl₂ 中制备的PS 均聚物多孔薄膜的表面形貌不同的是, PS-co-PPFS 共聚物多孔薄膜呈现出无序排列、平均孔径大小不同的两种孔结构; 在CHCl₃ 中制备所得薄膜的孔结构有序性相对较好, 两种孔的平均孔径分别为0.75 和0.37 μm.     

聚L-丙氨酸-聚乙二醇嵌段共聚物的胶束化行为研究

以氨基聚乙二醇单甲醚(MPEG-NH₂)为大分子引发剂, 采用开环聚合方法合成了聚L-丙氨酸-聚乙二醇嵌段共聚物(PAME), 并对其结构进行了表征; 用圆二色谱(CD)研究了嵌段共聚物在水溶液中的二级结构, 用芘荧光探针技术研究了共聚物胶束的形成及其临界胶束浓度(CMC), 利用动态光散射(DLS)和透射电镜(TEM)研究了胶束的粒径分布和形态. 结果表明, 在水溶液中共聚物链以α-螺旋构象形式存在, 在一定条件下嵌段共聚物能够形成球形的稳定胶束, PAME-1形成胶束的CMC为1.99×10^-5 mol/L, CMC值受共聚物中聚L-丙氨酸(PLA)链段含量的影响.     

苯胺四聚体与聚乙二醇嵌段及星型共聚物的合成及表征

以氨基封端的苯胺四聚体为基础, 通过将端氨基取代为不同数量的羧基, 得到了一系列连接臂数不同的苯胺四聚体-聚乙二醇共聚物, 对反应历程中的各阶段产物进行了结构表征, 并对苯胺四聚体及最终产物进行了电化学性能测试. 结构表征证明反应按照设计路线成功进行并得到了理想的产物; 循环伏安特性曲线表明, 共聚物基本保留了苯胺四聚体的电化学性能, 可以发生从还原态到中间态再到氧化态的转变.     

四臂星型聚苯乙烯-聚4-乙烯基吡啶嵌段共聚物纤维状胶束及负载金纳米粒子的研究

通过两步原子转移自由基聚合,制备了4种不同嵌段长度的四臂星型嵌段共聚物苯乙烯-聚4-乙烯基吡啶嵌段共聚物(PS-b-P4VP)4.在选择性溶剂甲苯中,随着嵌段长度的变化,自组装胶束的形态从球型到短棒状和纤维状的转变,其中(PS25-b-P4VP90)4自组装形成的以P4VP为核,以PS为花瓣型壳的纤维状胶束.以这种纤维状胶束作为模板,制备了金纳米粒子均匀分布的一维纳米材料     

呼吸图法制备聚亚甲基-b-聚甲基丙烯酸甲酯多孔薄膜

首先利用叶立德活性聚合和原子转移活性自由基聚合(ATRP)相结合制备了三个不同链段比的聚亚甲基-b-聚甲基丙烯酸甲酯(PM-b-PMMA)两嵌段聚合物. 接着以它们为原料, 利用静态呼吸图方法在四种不同溶剂中制备了一系列的具有蜂窝状表面的多孔薄膜, 用扫描电子显微镜(SEM)观察了多孔薄膜的形貌. 研究了溶剂、溶液浓度、聚合物链段长度及链段比等因素对多孔薄膜表面孔的大小和分布的影响. 结果表明: 当PM_2k-b-PMMA_2k嵌段聚合物浓度为3 wt%、溶剂为二硫化碳(CS₂)和二氯甲烷(CH₂Cl₂)时, 可以通过静态呼吸图方法制备出孔径为纳米级(520 nm)和微米级(1.1 μm)的较为规整的多孔薄膜. 多孔薄膜表面的孔径随PM-b-PMMA浓度的减小而增大|两嵌段聚合物中两个链段的长度及其链段比的变化对多孔膜表面孔径均产生较大的影响.     

ABA型聚L-丙氨酸-聚乙二醇嵌段共聚物的合成及其表征

利用L-α-丙氨酸和三聚光气反应制备了N-羧基-α-丙氨酸-环内酸酐(NCA).以聚乙二醇(PEG)为原料.制备了端氨基聚乙二醇(PEG-NH₂),并以此作为引发剂,引发NCA开环聚合.合成了不同组成和分子量的聚L-丙氨酸-聚乙二醇(PLAA-PEG-PLAA)嵌段共聚物.利用IR、¹H NMR、DSC、WAXD、CD等方法对共聚物结构进行了表征.结果表明,PEG-NH₂引发NCA开环聚合得到的是嵌段共聚物,通过¹H NMR谱得到共聚物组成及数均分子量;引入PEG的结果使聚L-丙氨酸的亲水性有所改善;CD测诚结果表明共聚物在水溶液中主链主要以α-螺旋构象存在.     

两亲性PS-b-PEG嵌段共聚物刷的合成及响应行为

利用原子转移自由基聚合(ATRP)和点击化学(Click)反应, 在硅基底上制备了聚苯乙烯-b-聚乙二醇(PS-b-PEG)两亲性嵌段共聚物刷. 首先, 利用ATRP方法在表面改性的硅片引发苯乙烯单体(St)的聚合, 得到PS-Br均聚刷, 然后通过叠氮化钠(NaN₃)将均聚刷末端功能化为PS-N₃, 再与炔基聚乙二醇甲醚(Alkynyl-PEG)发生Click反应, 得到PS-b-PEG嵌段共聚物刷. 通过X射线光电子能谱(XPS)和接触角测量仪表征了聚合物刷的表面化学组成和表面亲疏水性质, 证明在硅基底上接枝了嵌段共聚物刷. 用原子力显微镜(AFM)观察了PS-b-PEG嵌段共聚物刷在不同溶剂处理后的形态结构变化, 研究了其响应行为.     

苯胺四聚体-PEG两亲性嵌段共聚物的合成、表征及自组装行为

以二环己基碳二亚胺（DCC）为缩合剂与聚乙二醇单甲基醚（mPEG）反应的产物再与苯胺四聚体（AT）反应得到了两嵌段共聚物. 采用1H-NMR和FTIR分析方法确认了共聚物的结构,UV-Vis及CV的测试结果表明该共聚物具有良好的电活性特征. 用扫描电镜与光散射的方法对粒径大小进行了测量,共聚物在水溶液中可形成直径125 nm左右的均匀球形组装体,并通过透射电镜确定了组装体的实心结构. 当嵌段共聚物处于中间氧化态时,组装体的尺寸会随着溶液pH值的不同而变化. 对组装体的形成及pH敏感性的可能机理进行了讨论.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.