呼吸图法制备聚亚甲基-b-聚甲基丙烯酸甲酯多孔薄膜

首先利用叶立德活性聚合和原子转移活性自由基聚合(ATRP)相结合制备了三个不同链段比的聚亚甲基-b-聚甲基丙烯酸甲酯(PM-b-PMMA)两嵌段聚合物. 接着以它们为原料, 利用静态呼吸图方法在四种不同溶剂中制备了一系列的具有蜂窝状表面的多孔薄膜, 用扫描电子显微镜(SEM)观察了多孔薄膜的形貌. 研究了溶剂、溶液浓度、聚合物链段长度及链段比等因素对多孔薄膜表面孔的大小和分布的影响. 结果表明: 当PM_2k-b-PMMA_2k嵌段聚合物浓度为3 wt%、溶剂为二硫化碳(CS₂)和二氯甲烷(CH₂Cl₂)时, 可以通过静态呼吸图方法制备出孔径为纳米级(520 nm)和微米级(1.1 μm)的较为规整的多孔薄膜. 多孔薄膜表面的孔径随PM-b-PMMA浓度的减小而增大|两嵌段聚合物中两个链段的长度及其链段比的变化对多孔膜表面孔径均产生较大的影响.     

苯胺四聚体-聚乙二醇-苯胺四聚体嵌段共聚物薄膜的自组装

以氨基封端的苯胺四聚体为基础,以甲苯2,4-二异氰酸酯(TDI)为中间体制备了苯胺四聚体-聚乙二醇-苯胺四聚体(ANI₄-PEG-ANI₄,PEG600,M_n＝600)嵌段共聚物,并溶于乙醇/N,N-二甲基甲酰胺(DMF)混合溶剂后,涂覆于导电玻璃(ITO)表面制备成薄膜,利用原子力显微镜(AFM)、紫外-可见光谱(UV-Vis)和循环伏安(CV)等研究了薄膜的自组装及电化学行为等,讨论了诱导溶剂对嵌段共聚物薄膜形态和性能的影响. 研究发现,通过改变混合溶剂比和诱导溶剂种类,ANI₄-PEG-ANI₄嵌段共聚物薄膜可以实现多种形态的转变.     

芳基亚胺-脒基稀土烷基化合物的合成及其催化异戊二烯聚合研究

制备了芳基亚胺-脒基稀土二烷基化合物[NNN]Ln(CH₂SiMe₃)₂ {[NNN]=[2-C(H)NDippC₆H₃NHC(Ph)NDipp], Dipp=2,6-i-Pr₂C₆H₃, Ln=Y (2), Sm (3)}, 2和3通过了¹H NMR, ¹³C NMR, IR和元素分析测试, 通过X-ray确定了化合物2的晶体结构. 加入[Ph₃C][B(C₆F₅)₄]和烷基铝, 两个化合物均能高效催化异戊二烯聚合, 具有较好的3,4-选择性(88%), 中等的立体选择性(rr=50%), 较高的分子量(M_n=6.8×10⁴)和较窄的分子量分布(M_w/M_n=1.15). 同时发现, 烷基铝和[Ph₃C][B(C₆F₅)₄]的比例影响催化聚合的区域选择性.     

一种新型含酞侧基聚芳醚砜的稀溶液性质研究(Ⅰ)──溶解行为和M-H方程的测定

制备了窄分布的含酞侧基聚芳醚砜(PES-C)级份样品,用光散射法测定样品重均分子量,粘度法测定样品在DMF、CHCl₃和1,2-C₂H₄Cl₂中的特性粘数和Huggins参数k'值。k'值远大于0.5反映了体系中存在特殊的溶解行为。得到PES-C在3种溶剂中的Mark-Houwink方程: [η]=2.79× 10^-2M_w^0.615,r=0.999 8(DMF,25℃) [η]=3.96× 10^-2M_w^0.58,r=0.999 5(CHCl₃,25℃) [η]=7.40× 10^-2M_w^0.52,r=0.999 5(1,2-C₂H₄Cl₂,25℃).     

过渡金属钌、铑配合物在室温离子液体中催化硅氢加成反应的研究

研究了在室温离子液体以及室温离子液体/有机溶剂复合介质体系中, Rh(PPh₃)₃Cl, Ru(PPh₃)₃Cl₂等催化烯烃与三乙氧基硅烷的硅氢加成反应. 实验结果表明, 在乙二醇二甲醚/离子液体1-丁基-3-甲基咪唑六氟磷酸盐(BMImBF₆) (V/V＝1/4)介质中, 于90 ℃下, 己烯与三乙氧基硅烷反应的转化率为100%, β加成物的选择性可达89.0%. 而用Rh(PPh₃)₃Cl作为反应的催化剂, 在纯离子液体BMImPF₆中, 就可以高效催化烯烃与三乙氧基氢硅烷的加成反应. 过渡金属Rh(PPh₃)₃Cl, Ru(PPh₃)₃Cl₂催化剂/离子液体BMImPF₆催化体系, 不仅解决了产物与催化剂分离困难这一难题, 同时, 离子液体BMImPF₆的存在提高了过渡金属Rh(PPh₃)₃Cl, Ru(PPh₃)₃Cl₂催化硅氢加成反应的活性, 特别是β加成物的选择性. 反应结束后, 催化剂/离子液体与产物易于分离, 并且可以重复使用.     

新型复合聚合物电解质离子导电行为的研究

PEG600和CH₂Cl₂通过Williamson缩聚反应,生成主链柔顺的PEG共聚物.¹H NMR测试表明其以[CH₂O(CH_2>CH₂O)¹³]为重复结构单元.与聚合物质量含量8%的气相SiO₂及适量的LiN(CF₃SO₂)2掺杂,制备一系列新型复合聚合物电解质.通过AC阻抗研究离子电导率,提出适合本体系的等效电路.该体系具有良好的成膜性能与热稳定性能,电导率比传统的PEO/盐体系高2～3个数量级.离子电导率随着温度的升高而增加,低温电导率增加较快,高温电导率增加较慢,呈非Arrhenius变化.在EO/Li=13～34:1(摩尔比)范围内,离子电导率随着盐浓度的变化出现两个峰值,低盐浓度的峰值较高.在303 K, EO/Li=28:1时,最大离子电导率接近10^-4 S/cm.     

非对称β-二亚氨基镁络合物催化丙交酯、己内酯开环聚合/共聚研究

合成了一系列非对称β-二亚氨基镁硅氨基络合物,通过¹H NMR、¹³C NMR和元素分析进行了表征,典型络合物经X-射线单晶衍射确定了其晶体结构.利用上述镁络合物在四氢呋喃中催化外消旋丙交酯开环聚合主要得到较低至中等杂规度的聚合物（P_r=0.64~0.80）.镁络合物在室温、甲苯中对ε-己内酯开环聚合表现出中等的催化活性,得到较宽分子量分布的聚合物（M_w/M_n=1.37~1.67）.利用典型镁络合物2进行催化L-丙交酯和ε-己内酯共聚的研究,采用分步加料法（两种不同加料顺序）以及一锅法均得到了两嵌段结构为主的共聚物.所得共聚物通过核磁氢谱、碳谱等测试,进一步确定了其微观链结构.     

PbO-PbI2复合物膜转化的CH3NH3PbI3钙钛矿薄膜及其光电特性

有机-无机卤化物钙钛矿是一类优异的光电材料. 在过去四年内, 基于有机-无机卤化物钙钛矿的光电器件实现了超过15%的光电转换效率. 而有机-无机卤化物钙钛矿材料的可控制备是保证其在光电器件中应用的基础. 本文采用新的沉积方法在玻璃衬底表面制备了一种典型的有机-无机卤化物钙钛矿CH₃NH₃PbI₃薄膜. 其制备过程是: 采用超声辅助的连续离子吸附与反应法在玻璃衬底表面沉积PbO-PbI₂复合物膜, 之后与CH3NH3I蒸汽在110 ℃环境下反应, 将PbO-PbI₂复合物膜转化成CH₃NH₃PbI₃钙钛矿薄膜. 对CH₃NH₃PbI₃薄膜的微观结构, 结晶性及其光电性能等进行了表征. 结果表明, CH₃NH₃PbI₃薄膜呈晶态, 具有典型的钙钛矿晶体结构. 薄膜表面形貌均匀, 晶粒尺寸超过400 nm. 在可见光范围, CH₃NH₃PbI₃薄膜透过率低于10%, 能带宽度为1.58eV. 电学性能研究表明CH₃NH₃PbI₃薄膜表面电阻率高达1000 MΩ. 高表面电阻率表明CH₃NH₃PbI₃薄膜具有一定的介电性能, 其介电常数(ε_r)在100 Hz时达到155. 本研究提出了一种制备高质量CH₃NH₃PbI₃钙钛矿薄膜的新方法, 所得CH₃NH₃PbI₃薄膜可望在光、电及光电器件中得到应用.     

离子液体Zn[CO(NH2)2]3Cl2介质中二肽催化醛的不对称α-氯代反应

以二肽Pro-Trp为催化剂,2,3,4,5,6,6-六氯-2,4-环己二烯-1-酮为氯化剂,离子液体Zn[CO(NH₂)₂]₃Cl₂为溶剂,在N-甲基吗啉(NMM)存在下,各种醛能够高收率、较高立体选择性地完成羰基α-卤代反应,目标产物的产率可达到95%,对映选择性可达92%ee。 该方法具有操作简便、离子液体和催化剂可重复使用的优点。     

基于2-吡啶甲醛肟配体的NiⅡ2ZnⅡ2簇配合物的合成、晶体结构、磁性及光催化性能

在溶剂热条件下,以2-吡啶甲醛肟(HL)为主配体,Zn(OAc)₂·2H2O和NiCl₂·6H₂O为金属盐,合成了一个Ni^Ⅱ₂Zn^Ⅱ₂簇配合物[Ni₂Zn₂(L)₄Cl₂(CH₃O)₂](1),通过元素分析、红外光谱、单晶X射线衍射等对其结构进行了表征。研究了该配合物的磁性及光催化降解染料的性能,结果表明:配合物1属于正交晶系,Pna2₁空间群,其分子中包含2个Ni^Ⅱ离子,2个Zn^Ⅱ离子,4个L^-配体,2个Cl^-离子和2个CH₃O^-离子。磁性研究表明Ni^Ⅱ…Ni^Ⅱ离子间存在弱的反铁磁相互作用。光催化降解染料的研...     

Julolidine-labelled fluorinated block copolymers for the development of two-layer films with highly sensitive vapochromic response

Fluorinated block copolymers composed of a polystyrene (S_x) first block and a polyacrylate second block carrying hydrophobic/lipophobic perfluorohexyl side chains (AF) were prepared by atom transfer radical polymerization (ATRP). Fluorescence emission properties were imparted to the copolymers by incorporation in the second block of a julolidine-based fluorescent molecular rotor (JCBF). The synthesized block copolymers were used as the fluorescent low-surface energy thin top-layer onto a polystyrene bottom-layer to produce novel two-layer film vapochromic sensors. Contact angle and X-ray photoelectron spectroscopy (XPS) measurements revealed that the two-layer film surfaces were hydrophobic and lipophobic at the same time and highly enriched in fluorine content as a result of the effective segregation of the perfluorinated tails to the polymer-air interface. The fluorescence intensity of the two-layer films decreased significantly when they were exposed to vapours of organic solvents, including tetrahydrofurane, chloroform, and trifluorotoluene. However, an AF content-dependent sensing behaviour was also observed, with the two-layer films containing the copolymer with the shorter fluorinated block giving a more rapid and almost quantitative decrease in fluorescence variation. Fluorescence emission of the films was also proved to vary with temperature. Both the vapochromic and thermochromic responses were reversible after successive solicitation cycles. The fluorescence variation of the two-layer films was much more marked than that of the corresponding PS/JCBF blend, thus providing a system potentially applicable as highly sensitive volatile organic compound (VOC) sensor, thanks to the active role of the fluorinated block in promoting the migration of the fluorophore to the outermost surface layers.     

聚乳酸蜂窝状多孔膜的形成与控制

以单一组分聚L-乳酸(PLLA)为成膜材料,利用水辅助法制备了聚乳酸(PLLA)蜂窝状多孔膜.利用扫描电镜(SEM)和原子力显微镜(AFM)观察多孔膜形貌.研究溶剂、溶液浓度、环境温度和湿度等因素对所成多孔膜结构的影响.实验结果表明,高湿度环境和具有一定浓度的聚合物溶液是制备蜂窝状多孔膜的必要条件.溶剂的挥发性是形成规整蜂窝状孔结构的关键因素.环境相对湿度由43%增加到91%,PLLA多孔膜的孔径由(1.75±0.24)μm增加到(11.50±1.43)μm,且孔呈现六边形的蜂窝状结构.扫描电镜断面和AFM表明:膜表面形成了深度约为1.8μm的单层孔结构.通过控制溶液浓度、环境温度和湿度等因素来控制膜的表面形貌及其所成蜂窝状孔的大小.最佳的成膜条件为溶剂CH2Cl2,湿度75%RH,温度34℃,浓度3 wt%.讨论了蜂窝状多孔膜的形成机理.     

树状化-线形两亲嵌段聚合物的合成及自组装研究

合成了缩酮保护的一代甲基丙烯酸羟乙酯单体DHEMA(G1),通过顺序ATRP聚合方法,制备得到大分子引发剂PDHEMA(G1)-Br,再引发苯乙烯单体得到一代嵌段聚合物PDHEMA(G1)-b-PS.以PDHEMA(G1)-b-PS为反应前体,通过重复的缩酮保护和脱保护反应,进一步得到了二代和三代的树状化-线形两亲嵌段...     

Synthesis and characterization of a new fluorinated macroinitiator and its diblock copolymer by AGET ATRP

A new fluorinated macroinitiator of poly 2,2,3,4,4,4-hexafluorobutyl methacrylate-Br (PHFMA-Br) was prepared via activator generated by electron transfer atom transfer radical polymerization (AGET ATRP), and then a series of fluorinated block copolymers with different fluorine content were successfully synthesized from the macroinitiator by the second step AGET ATRP. GPC, FTIR and ¹H NMR data obtained verified the synthesis. Contact angle measurement indicated that proper fluorine content could decrease the surface energy and increase the contact angle of the copolymer films. XPS characterization showed that the large difference in surface energy between the block and random copolymer film resulted from the difference of the fluorine content on the surface, although the fluorine content of the two copolymers in bulk was similar. The self-assembly behavior of the fluorinated block copolymer in selective solvents was evaluated by the TEM study, and the stable micelles with a core-shell structure were observed when the copolymer content was about 1 wt%.     

Polystyrene‐b‐poly(2,2,2‐trifluoroethyl acrylate)‐b‐polystyrene copolymers: Synthesis and fabrication of their hydrophobic porous films,spheres, and fibers

New block copolymers Polystyrene‐b‐poly (2,2,2‐trifluoroethyl acrylate)‐b‐Polystyrene (PS‐PTFEA‐PS) with controlled molecular weight (M_n=5000‐11000 g?mol^?1) and narrow molecular weight distribution (M_w/M_n=1.13‐1.17) were synthesized via RAFT polymerization. The molecular structure and component of PS‐PTFEA‐PS block copolymers were characterized through ¹H NMR, ¹⁹F NMR, GPC, FT‐IR and elemental analysis. The porous films of such copolymers with average pore size of 0.80‐1.34 μm and good regularity were fabricated via a static breath‐figure (BF) process. The effects of solvent, temperature, and polymer concentration on the surface morphology of such film were investigated. In addition, microstructured spheres and fibers of such block copolymers were fabricated by electrospinning process and observed by scanning electron microscopy (SEM). Furthermore, the hydrophobicity of porous films, spheres, and fibers was investigated. The porous film showed a good hydrophobicity with the water‐droplet contact angles of 129°, and the fibers showed higher hydrophobicity with the water‐droplet contact angles of 142°. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 678–685     

Connectivity of PS-b-PEO templated spherical pores in titanium oxide films

Titania films having relatively uniform spherical pores were successfully fabricated using polystyrene-block-poly(ethylene oxide) (PS(n)-b-PEO(m)) diblock copolymers. Depending on the molecular weight of PS(n)-b-PEO(m), the spherical pores were varied from large mesopores (n = 40,000, m = 53,000; ～40 nm) to macropores (n = 58,600, m = 71,000; ～60 nm, n = 100,000, m = 150,000; ～100 nm) in diameter. It was confirmed that the porous structures were thermally stable with crystallization of the titania frameworks. Interconnectivity between the spherical pores was reliant on the micellar arrangement of hydrophobic PS cores, while the amount of isolated pores was increased in the films prepared using low molecular weight PS(n)-b-PEO(m). The presence of such isolated pores was confirmed on the basis of adsorption experiments by using a globular hemoprotein cytochrome c (ca. 3.1 nm). Highly interconnected spherical pores, which were preferentially fabricated using high molecular weight PS(n)-b-PEO(m), were quite helpful for smooth diffusion-adsorption of bulky proteins inside the porous films.     

Synthesis of poly(ethylene‐co‐vinyl alcohol)‐g‐polystyrene graft copolymer and their applications for ordered porous film and compatibilizer

A series of new functional poly(ethylene‐co‐vinyl alcohol)‐g‐polystyrene graft copolymers (EVAL‐g‐PS) with controlled molecular weight (M_n = 38,000–94,000 g mol^?1) and molecular weight distribution (M_w/M_n = 2.31–3.49) were synthesized via a grafting from methodology. The molecular structure and component of EVAL‐g‐PS graft copolymers were confirmed by the analysis of their ¹H NMR spectra and GPC curves. The porous films of such copolymers were fabricated via a static breath‐figure (BF) process. The influencing factors on the morphology of such porous films, such as solvent, temperature, polymer concentration, and molecular weight of polymer were investigated. Ordered porous film and better regularity was fabricated through a static BF process using EVAL‐g‐PS solution in CHCl₃. Scanning electron microscopy observation reveals that the EVAL‐g‐PS graft copolymer is an efficient compatibilizer for the blend system of low‐density polyethylene/polystyrene. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 516–524     

Hierarchically structured multifunctional porous interfaces through water templated self-assembly of ternary systems

Herein, a facile water-assisted templating approach, the so-called breath figures method, has been employed to prepare multifunctional and hierarchically structured porous patterned films with order at different length scales (nano- and micrometer). Tetrahydrofuran solutions of ternary blends consisting on high molecular weight polystyrene, an amphiphilic block copolymer, polystyrene-b-poly[poly(ethylene glycol) methyl ether methacrylate] (PS(40)-b-P(PEGMA300)(48)), and a fluorinated copolymer, polystyrene-b-poly(2,3,4,5,6-pentafluorostyrene) (P5FS(21)-b-PS(31)), have been used to obtain films varying the proportion of the three components. Confocal micro-Raman spectroscopy and atomic force microscopy demonstrated the preferential location of the different functionalities in the films. Because of the breath figures mechanism, the amphiphilic copolymer yield pores enriched in hydrophilic functionality while the fluorinated copolymer remained mixed with the PS matrix and eventually also forming self-assembled nanostructures at the surface. As a consequence, two levels of order can be observed, i.e., micrometer size pores with nanostructured domains due to the block copolymer self-assembly. In addition, the distribution of the amphiphilic copolymer within the holes is not regular being located principally on the edges of the cavities. This can be attributed to the coffee stain phenomenon occurring in the water droplets as a consequence of the segregation of the block copolymers to the droplets and their self-assembly.     

Poly(acrylate‐b‐styrene‐b‐isobutylene‐b‐styrene‐b‐acrylate) Block Copolymers via Carbocationic and Atom Transfer Radical Polymerizations

A series of polyacrylate‐polystyrene‐polyisobutylene‐polystyrene‐polyacrylate (X‐PS‐PIB‐PS‐X) pentablock terpolymers (X=poly(methyl acrylate) (PMA), poly(butyl acrylate) (PBA), or poly(methyl methacrylate) (PMMA)) was prepared from poly (styrene‐b‐isobutylene‐b‐styrene) (PS‐PIB‐PS) block copolymers (BCPs) using either a Cu(I)Cl/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) or Cu(I)Cl/tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) catalyst system. The PS‐PIB‐PS BCPs were prepared by quasiliving carbocationic polymerization of isobutylene using a difunctional initiator, followed by the sequential addition of styrene, and were used as macroinitiators for the atom transfer radical polymerization (ATRP) of methyl acrylate (MA), n‐butyl acrylate (BA), or methyl methacrylate (MMA). The ATRP of MA and BA proceeded in a controlled fashion using either a Cu(I)Cl/PMDETA or Cu(I)Cl/Me₆TREN catalyst system, as evidenced by a linear increase in molecular weight with conversion and low PDIs. The polymerization of MMA was less controlled. ¹H‐NMR spectroscopy was used to elucidate pentablock copolymer structure and composition. The thermal stabilities of the pentablock copolymers were slightly less than the PS‐PIB‐PS macroinitiators due to the presence of polyacrylate or polymethacrylate outer block segments. DSC analysis of the pentablock copolymers showed a plurality of glass transition temperatures, indicating a phase separated material.     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008