Parallel synthesis of libraries of anodic and cathodic functionalized electrodeposition paints as immobilization matrix for amperometric biosensors

The integration of flexible anchoring groups bearing imidazolyl or pyridyl substituents into the structure of electrodeposition paints (EDP) is the basis for the parallel synthesis of a library containing 107 members of different cathodic and anodic EDPs with a high variation in polymer properties. The obtained EDPs were used as immobilization matrix for biosensor fabrication using glucose oxidase as a model enzyme. Amperometric glucose sensors based on the different EDPs showed a wide variation in their sensor characteristics with respect to the apparent Michaelis-Menten constant (KM(app)) representing the linear measuring range and the maximum current (Imax(app)). Based on these results first assumptions concerning the impact of different side chains in the EDP on the expected biosensor properties could be obtained allowing for an improved rational optimization of EDPs used as immobilization matrix in amperometric biosensors.     

Multivariate calibration standardization used for the reduction of standards needed for multivariate calibration in inductively coupled plasma mass spectrometry

Multivariate calibration methods such as partial least squares regression (PLS) are capable of eliminating spectroscopic interferences in inductively coupled plasma mass spectrometry. These methods often require a large number of standards for the calibration, which can be a drawback if a full recalibration is needed very often. This problem can be circumvented by using multivariate calibration standardization to adjust either the sample or the calibration model to match a given state of the instrument. Four standardization methods (two univariate methods, direct standardization, and inverse model standardization) have been investigated and compared with full and partial calibration. Direct standardization gave the best results. It allowed for up to 78% reduction of the number of standards needed in the daily routine. Inverse model standardization needed more standards to accomplish similar results, and the two univariate methods could not be used for the determination of Gd.     

The statistical basis of standardization designs for diagnostic assays

Accuracy and long-term quality of laboratory diagnostic assays depend critically on the standardization process. In this note we review statistically typical procedures and designs used in standardization. Issues of practical relevance such as the number of systems, runs, and replicates to be involved in the standardization design, and quality control aspects, are addressed.     

On the use of bis(1,5-dimethyl-2-phenyl-3-pyrazolone)perchlorate as a standard for non-aqueous titrations

Summary Titration curves and data are presented for the standardization of perchloric acid in glacial acetic acid and for tetrabutylammonium hydroxide solutions vs. antipyrine perchlorate. In the standardization of the basic titrant this compound yields a single potentiometric break only in the highly basic solvent 1,1,3,3-tetramethylguanidine. In methanol, pyridine, acetonitrile, N,N-dimethylformamide, and dimethylsulfoxide two breaks are obtained. Only the second break is analytically useful and corresponds to a monobasic acid.Work performed under the auspices of the U.S. Energy Research & Development Administration, contract No. W-7405-Eng-48     

Standardization of SPE signals in multicomponent analysis of three benzimidazolic pesticides by spectrofluorimetry

Piecewise direct standardization (PDS) is applied to multivariate standardization of fluorescence signals using partial least squares (PLS) and principal component regression (PCR) as the calibration models. The multivariate standardization was used to transfer spectra obtained after a step of solid phase extraction (SPE) to spectra registered in pure solvent in the determination of carbendazim, fuberidazole and thiabendazole in water samples. The influential parameters, such as tolerance, window size and the number of samples of the standardization subset were optimized by means of the root mean squared error of prediction (RMSEP). Similar RMSEP values were obtained by PLS and PCR using the optimized influential parameters in the standardization. However, better predictions of the compounds were obtained in test set by the PLS model.     

Modelling the matrix interference of iron in the multivariate determination of copper by stripping voltammetry Instrument standardization

Two different standardization procedures have been applied in order to minimize the experimental effort necessary to determine copper in presence of iron by differential pulse anodic stripping voltammetry. The significant matrix interference caused by iron in the voltammetric determination of copper has been successfully solved by using partial least squares (PLS) regression. The use of this multivariate regression implies a large number of training set samples, so a standardization method was required. In fact, the standardization methods used have reduced the calibration samples needed in future determinations by up to 75%. Moreover, PLS regression allowed both metals to be determined simultaneously by using an adequate experimental design, without any limitation to their respective concentrations and without the need to know the level of interference.     

Evaluation of the analytical performance of inductively coupled plasma mass spectrometry for the simultaneous determination of major and minor elements in basic slags

The application of inductively coupled plasma mass spectrometry to the analysis of basic slags has been studied. A conventional dissolution-fusion procedure and a microwave digestion system were used for sample dissolution. Suitable selection of the analyte isotopes and the use of appropriate instrument settings and of internal standardization makes it possible to determine the major and minor elements in the same test sample dilution. Use of the omnirange device and low-abundance isotopes for the determination of the major elements is evaluated. The influence of the attack reagents is tested and the interferences caused by polyatomic ions are studied and corrected by applying elementary mathematical equations. For the major and minor elements considered, precision was found to be better than 1% (RSD). Results are presented for three basic slag reference materials and the agreement between the certified and found values shows the capacity of the method accurately to determine elemental concentrations in basic slags.     

对直接标准化算法的改进及其应用

由于各种仪器之间存在差异,主机上建立的定量模型用于从机会导致预测结果出现较大偏差。目前主要通过有标样方法和无标样方法来减小预测偏差。该文对现有标样方法中的直接标准化算法进行改进,在转移矩阵的建立过程中,对从仪器数据矩阵进行主成分分解,以预测均方差为判定标准,确定最终的转移矩阵。并以玉米和烟草数据为对象,测试了该法的有效性。玉米样品含有2种成分:水分和蛋白质;烟草样品含有4种成分:还原糖、总糖、总氮和总碱。结果表明,对于玉米样品中的2种成分,采用改进的方法可显著提高预测的准确度;对于烟草中的4种成分而言,采用改进的方法可获得稳健的预测结果。     

Development of variance‐filtered instrumental transfer methods for high‐resolution NMR spectroscopy

The introduction of a variance‐filter to both direct standardization (DS) and piece‐wise direct standardization (PDS) instrumental transfer methods for the analysis of NMR spectral data is described. The variance‐filter modification allows for the identification of regions in the NMR spectra that are not adequately represented by the limited number of transfer calibration samples used during the calculation of the instrument‐to‐instrument transfer matrix. For these spectral frequencies, the corresponding portion of the transfer matrix is replaced by identity (or scaled identity) prior to the secondary instrumental data sets being transferred to the target instrument response. The spectral matching performance of the variance‐filtered instrumental transfer method as applied to high‐resolution ¹H NMR spectra is presented along with possible uses and limitations. Copyright © 2010 John Wiley & Sons, Ltd.     

Transfer of multivariate regression models between high‐resolution NMR instruments: application to authenticity control of sunflower lecithin

In recent years the number of spectroscopic studies utilizing multivariate techniques and involving different laboratories has been dramatically increased. In this paper the protocol for calibration transfer of partial least square regression model between high‐resolution nuclear magnetic resonance (NMR) spectrometers of different frequencies and equipped with different probes was established. As the test system previously published quantitative model to predict the concentration of blended soy species in sunflower lecithin was used. For multivariate modelling piecewise direct standardization (PDS), direct standardization, and hybrid calibration were employed. PDS showed the best performance for estimating lecithin falsification regarding its vegetable origin resulting in a significant decrease in root mean square error of prediction from 5.0 to 7.3% without standardization to 2.9–3.2% for PDS. Acceptable calibration transfer model was obtained by direct standardization, but this standardization approach introduces unfavourable noise to the spectral data. Hybrid calibration is least recommended for high‐resolution NMR data. The sensitivity of instrument transfer methods with respect to the type of spectrometer, the number of samples and the subset selection was also discussed. The study showed the necessity of applying a proper standardization procedure in cases when multivariate model has to be applied to the spectra recorded on a secondary NMR spectrometer even with the same magnetic field strength. Copyright © 2016 John Wiley & Sons, Ltd.     

Results of a joint trial on the method of the differential thermal analysis in the temperature range from 25 to 1000°C

For settling the question to what degree standardization of differential thermal analysis (DTA) is feasible by a joint trial of different laboratories, DTA-measurements on temperature-standard-substances have been carried out. The results are comparable with those obtained on identical substances by the International Confederation for Thermal Analysis and the National Bureau of Standards. A statistic evaluation of the DTA-procedures of the individual laboratories shows that the preponderant number of laboratories is achieving data which could be considered to belong to the same basic set. As 2 common standard deviation of the procedure of differential thermal analysis in the temperature interval of 25 to 1000°C a value of 3.6 K has been ascertained.     

A comparative study of calibration transfer methods for determination of gasoline quality parameters in three different near infrared spectrometers

This work presents a comparative study of calibration transfer among three near infrared spectrometers for determination of naphthenes and RON (Research Octane Number) in gasoline. Seven transfer methods are compared: direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), reverse standardization (RS), piecewise reverse standardization (PRS), slope and bias correction (SBC) and model updating (MU). Two pre-treatment procedures, namely standard normal variate (SNV) and multiplicative scatter correction (MSC), are also investigated. The choice of an appropriate number of transfer samples for each technique, as well as the effect of window size in PDS/PRS and OSC components, are discussed. A broad set of gasoline samples representative of the Northeastern states of Brazil is employed in the investigation. The results show that the use of calibration transfer yields prediction errors comparable to those obtained with complete recalibration of the secondary instrument. Overall, the results point to RS as the best method for the analytical problem under consideration. When storage and/or physical transportation of transfer samples are impractical, MU is more appropriate. The comprehensive investigation carried out in the present work will be of value for practitioners involved in networks of fuel monitoring.     

钙钛矿型复合氧化物材料

从钙钛矿复合氧化物独特的电子结构及晶体结构出发，分析归纳了其作为功能材料的理论规律，综述了它在导体透氧膜、气敏传感器、固体燃料电池、磁制冷和氧化还原催化剂等领域的研究新成果和应用进展，提出进一步研究的策略方案。     

小波变换-分段直接校正法用于近红外光谱模型传递研究

提出了一种新的传递算法(WT-PDS)———小波变换-分段直接校正法,并详细讨论了模型传递参数和传递结果。首先利用小波变换对光谱进行压缩处理,采用PDS算法消除不同仪器之间压缩数据的差异,最后利用经校正的压缩数据进行分析,实现模型传递。本方法能够扣除不同仪器之间的大部分差异,大幅度改善分析精度。传递后模型分析精度与源机模型稳健性紧密相关。如果源机模型稳健性强,则能够实现不同仪器之间的共享。本方法能够实现源机的0#轻柴十六烷值、凝点、馏出温度;-10#轻柴十六烷值、凝点以及-10#军柴凝点和馏出温度共10个模型在5台仪器之间共享,简化了建模的成本。与传统的PDS相比,WT-PDS方法具有传递和建模变量少、速度快、光谱校正性能高等优点,而其模型分析精度与传统PDS基本一致。     

吸附固定相开管毛细管电色谱方法的建立（英文）

 首次将管壁吸附作用作为开管毛细管电色谱固定相制备的推动力,成功地建立了称为“吸附固定相开管毛细管电色谱”的一种新方法。原理是：选择合适的条件,让荷正电的化合物在毛细管管壁上充分吸附,直接用吸附层作为固定相。目前,已有数类化合物被用作固定相物质,其中包括阳离子表面活性剂如十六烷基三甲基溴化铵（CTAB）、碱性蛋白质如溶菌酶和细胞色素C、碱性小肽如赖氨酸-酪氨酸和赖氨酸-丝氨酸-酪氨酸、以及碱性氨基酸如L-赖氨酸。CTAB吸附固定相用于分离电中性化合物,其它吸附固定相用于手性分离。     

基体归一定量技术在激光烧蚀-等离子体质谱法锆石原位多元素分析中的应用

探讨了内标法和基体归一法校准的基本原理。基体归一校准法的基本步骤为:先用简单外标法测得样品中尽可能全的主、次、痕量元素含量,氧化物加和后进行100%归一,得到灵敏度校正系数,对所有元素的测定结果进行修正。修正结果的可靠性在很大程度上取决于测定元素是否"完全"。由于锆石的基体元素组成简单且易于测定,很适合用基体归一法校准。在激光剥蚀-电感耦合等离子体质谱法(LA-ICP-MS)微区原位分析中,应用基体归一校准法的最大优点是:可以避免预先用其它微区分析技术对未知样品中的内标元素进行定量。该技术可适用于具有环带结构、难以找到均匀分布的内标元素的地质样品的元素空间分布测定。在高分辨ICP-MS(Element2)和NewWave-UV-213激光系统上,应用基体归一定量技术同时分析了锆石中主、次、痕量共54种元素。对未知锆石样品的分析,基体归一法与内标法结果的一致性令人满意。分析德国蛇纹岩标准玻璃ATHO-G中相对误差<25%的有52个元素,<10%的有36个元素;大多数元素的相对标准偏差<10%。     

Dispersive liquid-liquid microextraction versus single-drop microextraction for the determination of several endocrine-disrupting phenols from seawaters

Two liquid-phase microextraction procedures: single-drop microextraction (SDME) and dispersive liquid-liquid microextraction (DLLME), have been developed for the determination of several endocrine-disrupting phenols (EDPs) in seawaters, in combination with high-performance liquid chromatography (HPLC) with UV detection. The EDPs studied were bisphenol-A, 4-cumylphenol, 4-tertbutylphenol, 4-octylphenol and 4-n-nonylphenol. The optimized SDME method used 2.5 μL of decanol suspended at the tip of a micro-syringe immersed in 5 mL of seawater sample, and 60 min for the extraction time. The performance of the SDME is characterized for average relative recoveries of 102 ± 11%, precision values (RSD) < 9.4% (spiked level of 50 ng mL⁻¹), and detection limits between 4 and 9 ng mL⁻¹. The optimized DLLME method used 150 μL of a mixture acetonitrile:decanol (ratio 15.7, v/v), which is quickly added to 5 mL of seawater sample, then subjected to vortex during 4 min and centrifuged at 2000 rpm for another 5 min. The performance of the DLLME is characterized for average relative recoveries of 98.7 ± 3.7%, precision values (RSD) < 7.2% (spiked level of 20 ng mL⁻¹), and detection limits between 0.2 and 1.6 ng mL⁻¹. The efficiencies of both methods have also been compared with spiked real seawater samples. The DLLME method has shown to be a more efficient approach for the determination of EDPs in seawater matrices, presenting enrichment factors ranging from 123 to 275, average relative recoveries of 110 ± 11%, and precision values (RSD) < 14%, when using a real seawaters (spiked level of 3.5 ng mL⁻¹).     

Micelle-mediated extractions using nonionic surfactant mixtures and HPLC-UV to determine endocrine-disrupting phenols in seawaters

An environmentally friendly method to extract endocrine-disrupting phenols (EDPs) from seawaters was realized using nonionic surfactant mixtures and micelle-mediated extractions. The preconcentration step was achieved directly in the seawater matrix, and was followed by high-performance liquid chromatography (HPLC) with ultraviolet (UV) detection without any clean-up steps to remove the surfactant mixture prior to injection. Various nonionic surfactant mixtures were used, and polyoxyethylene-10-laurylether (POLE) with polyoxyethylene-4-laurylether (Brij 30) was found to be the best to work with. Method optimization involved maximizing the preconcentration factor using the studied mixtures. The proposed method gave extraction recoveries ranging from 83.3 to 114.4% for an EDP spiking level of 46.7 μg L⁻¹, and from 63.4 to 112.4% for a spiking level of 4.7 μg L⁻¹ for EDPs studied in real seawater matrices, with relative standard deviations of <12.1%. The detection limits of the method varied from 0.18 μg L⁻¹ for bisphenol A (BPA) to 1.17 μg L⁻¹ for 4-cumylphenol (4-CP). The method was applied to seawaters from the Canary Islands with successful results. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Atomic absorption studies using a hollow-cathode tube as an absorption source

When hollow-cathode tubes are used as the emission source and as the absorption source, atomic absorption studies reveal microgram quantities of several elements; sodium, magnesium, calcium, beryllium, and silicon were detected in the discharge of the absorption tube. Conventional, independent circulating systems and d.c. power supplies, were used with each tube, along with other readily available equipment. An analytical curve plotted for sodium over the range 0—100 μg, obeys Beer's law. Lithium and magnesium suppress the sodium absorption values, thus careful standardization is necessary. The average percent deviation from the mean for a number of sodium samples analyzed was ± 8.0%.     

吸附固定相开管毛细管电色谱方法的建立（英文）

首次将管壁吸附作用作为开管毛细管电色谱固定相制备的推动力,成功地建立了称为“吸附固定相开管毛细管电色谱”的一种新方法。原理是：选择合适的条件,让荷正电的化合物在毛细管管壁上充分吸附,直接用吸附层作为固定相。目前,已有数类化合物被用作固定相物质,其中包括阳离子表面活性剂如十六烷基三甲基溴化铵（CTAB）、碱性蛋白质如溶菌酶和细胞色素C、碱性小肽如赖氨酸-酪氨酸和赖氨酸-丝氨酸-酪氨酸、以及碱性氨基酸如L-赖氨酸。CTAB吸附固定相用于分离电中性化合物,其它吸附固定相用于手性分离。所建立的方法重现性好（迁移时间次间RSD值小于2．3％）,柱效高（最高柱效可达590000／m,平均柱效在250000／m以上）,寿命较长（2～8℃下保存,至少30d）。与已有的固定相制备方法比较,所建立的方法具有简便、快速和稳定等优点。