表面活性剂存在条件下脲醛树脂杂化氧化硅微球的合成和表征

考察了表面活性剂存在条件下利用脲醛树脂杂化沉淀制备氧化硅微球的反应过程. 不同表面活性剂条件下所得的氧化硅微球产物各不相同. 焙烧后P123 (PEO20-PPO70-PEO20)条件的杂化微球分解成壳状氧化硅碎片, CTAB(十六烷基三甲基溴化铵)条件的氧化硅严重变形, 体积收缩到前体粒子的九分之一, 而SDBS(十二烷基苯磺酸钠)条件的产物球形貌良好的保留了下来. BET分析揭示P123和CTAB条件下的氧化硅比表面分别增加了20%和13%, 而SDBS(十二烷基苯磺酸钠)条件的产物在表面积不变的条件下孔体积和孔径减少了一半. 定量分析证明SDBS条件下氧化硅纳米粒子的杂化受到了明显抑制, 而正硅酸乙酯浸渍方式的补硅量接近一倍, 这种优化的几何结构保证了氧化硅微球产物的完整性和稳定性.     

乙二醛存在时脲醛树脂的控制性聚合现象

考察了乙二醛存在时脲醛树脂的控制性聚合现象.聚合微球的粒径分散在1.0～14μm之间,但当乙二醛存在时粒径集中在6.5～9.0μm;控制乙二醛的用量和比例可以调整所得微球的大小、改善微球的形貌和均匀性.添加乙二醛或增加乙二醛的比例能大幅延长沉淀反应的诱导期(延长25%以上);红外分析以及XRD分析结果证明醛基总量或甲醛比例的增加都可减小聚合产物的结晶性特征;乙二醛的存在调整了脲醛树脂的成核过程或初级粒子的生长速度,推测乙二醛覆盖了聚合物的表面或表面活性位,限制了尿素甲醛的扩散反应过程.乙二醛存在时杂化过程所得氧化硅微球的粒径仅为杂化微球的20%,分析结果推测杂化微球中存在氧化硅的径向含量梯度,这种梯度是氧化硅纳米粒子的杂化和脲醛树脂的聚合速度差异造成的.     

原位合成的活性脲醛树脂作为模板剂制备二氧化硅介孔材料

利用酸性条件下正硅酸乙酯的水解和脲醛树脂的聚合反应同时一步原位进行的方法合成了二氧化硅复合粉体(包括核壳微球结构和网状结构)和块体凝胶材料. 液氮吸附BET分析结果证明复合材料焙烧后得到的二氧化硅孔径分布均匀, 大小在介孔范围内. 改变反应性单体尿素. 甲醛及正硅酸乙酯等的初始浓度可对二氧化硅块体材料的孔径大小进行调节. 扫描电子显微镜观测结果显示, 随着原料单体初始浓度的变化复合粉体材料的微米级形貌可以是多孔网状结构或核壳结构. 从红外光谱和差热分析的结果推测, 高甲醛/尿素摩尔比[n(甲醛)∶n(尿素)≥2]条件下形成的支链脲醛树脂可作为块体二氧化硅理想的孔结构导向剂.     

大粒径介孔氧化硅微球的优化合成及表征

以非离子型嵌段共聚物为模板剂、正硅酸乙酯为硅源,制备了一种比表面积为712m2·g-1、孔径6.93nm、孔容1.06cm3·g-1、粒径10μm的介孔SBA-15微球,采用扫描电镜考察了各种合成条件对介孔氧化硅微球形貌的影响,对SBA-15介孔微球的合成条件优化和形成机理进行了研究和探讨。结果表明:介孔氧化硅微球的生长可以看作一个由微小溶胶粒子发生渐进聚沉、成长为较大溶胶粒子的过程;共表面活性剂和无机盐的引入对介孔微球的形成具有辅助作用;合成体系的酸度和晶化阶段之前的陈化条件是介孔微球形成的关键所在。在共聚物的盐酸溶液(1mol·L-1)中,不添加共表面活性剂和无机盐,仅控制陈化条件于35℃静置24h,100℃水热处理24h,可得到大粒径的介孔SBA-15微球。     

单分散空心SiO2纳米微球的合成与表征

聚乙烯吡咯烷酮(PVP)功能化的聚苯乙烯(PS)粒子在SiO2包覆的同时被乙醇/氨水介质溶解, 得到了单分散空心SiO2纳米微球. 该空心SiO2纳米微球的尺寸和形态可以通过PVP, NH4OH和正硅酸乙酯(TEOS)的用量来调节. PVP用量增加导致PS粒子变小, 从而得到较小的空心SiO2纳米微球; NH4OH用量增加, 空心SiO2纳米微球表面变得粗糙; TEOS用量增加, 空心SiO2纳米微球的壳层厚度增加. 包覆(溶解)温度是控制空心SiO2纳米微球形成的最有效手段. 在70 ℃的包覆(溶解)温度下可以获得全部空心的SiO2纳米微球.     

一种可精确控制粒径的SiO2微球合成方法

用改进的种子法合成SiO2微球. 微球生长过程中连续缓慢添加正硅酸乙酯,使用动态光散射法实时监控微球粒径的增长过程,调节正硅酸乙酯的添加,实现对粒径的精确控制. 为制备禁带位置位于1000 nm 的光子晶体,合成粒径为446 nm的SiO2微球,微球粒径在4 h内从193 nm 增长到446 nm,远远快于传统种子法,微球粒径与目标粒径偏差为±5 nm. 制得的SiO2微球被组装为光子晶体,其禁带位置恰好位于1000 nm.     

聚合物模板微球表面电性对中空二氧化硅微球形貌的影响

分别以过硫酸钾和偶氮二异丁基脒盐酸盐为引发剂,以聚乙烯吡咯烷酮(PVP)为分散剂,在水中引发苯乙烯聚合制备了2种表面分别带负电性和正电性基团的聚苯乙烯(PS)模板微球.在氨水催化下,利用正硅酸乙酯的水解缩合,形成PS/SiO_2复合微球,去除模板后得到中空SiO_2微球,并对其进行FTIR、电子显微镜、TGA以及氮气吸附等分析表征.结果表明,PS模板微球表面的电性决定了OH-的分布,从而导致PS模板微球表面SiO_2壳层不同的形成机制.当以表面带负电的PS微球为模板时,可得到树莓状的中空SiO_2微球;而以表面带正电的PS微球为模板时,得到是表面光滑的,具有介孔结构的中空SiO_2微球.     

原位聚合法制备酚醛树脂空心微球的工艺研究及性能表征

以原硅酸乙酯为核、聚丙烯酸为表面活性剂,甲阶酚醛树脂为壳,采用原位聚合法,利用甲阶酚醛树脂与聚丙烯酸之间的分子间作用力,制备了"核-壳"型酚醛树脂微球.除去原硅酸乙酯,得到了酚醛树脂中空闭孔微球.利用热失重(TG)、扫描电镜(SEM)以及红外吸收光谱(FTIR)对制备的酚醛树脂中空闭孔微球进行表征,并研究了反应体系的pH对制备工艺以及对酚醛树脂微球性能的影响.实验结果表明,当反应体系的pH在1附近时,利用原位聚合法合成的酚醛树脂中空微球具有较好的闭孔结构,红外吸收光谱表明所制备的酚醛树脂微球在实验条件下并未完全固化,热失重结果表明微球具有好的耐热性.     

种子表面改性法制备核壳结构PSt/SiO_2复合微球

首先采用无皂乳液聚合法合成了表面带负电荷、粒径为360nm的单分散聚苯乙烯(PSt)种子乳液,并以EtOH/H2O混合物为分散介质,利用γ-氨丙基三乙氧基硅烷(KH-550)在25℃下对PSt微球表面进行改性,得到了表面硅烷化并带有正电荷的改性PSt种子乳液,然后在碱性条件下加入原硅酸乙酯(TEOS)使其和微球进行共水解与共缩聚,制备出了核壳结构PSt/SiO2复合微球,并利用电镜对复合微球的结构形态进行了表征.研究表明,PSt种子乳液改性时体系的zeta电位随着KH-550用量的增加而升高,当KH-550用量为PSt种子重量的1/3时,体系的zeta电位从原来的-34.5mV升高到了38mV,达到对PSt微球表面改性的最佳值;在制备PSt/SiO2复合微球时,TEOS水解缩聚形成的SiO2包覆到改性微球上的量随着反应时间的延长而增加,反应24h时达到97.9%的最大值;随介质中水含量的增加,吸附到复合微球表面上的SiO2纳米颗粒逐渐减少,复合微球表面逐渐变得光滑,当EtOH/H2O质量比降低到60/28.5时,得到结构均一、壳层厚度为35nm的核壳结构PSt/SiO2复合微球。     

氨基硅球及其复合材料的合成与金属离子吸附

采用一锅法制备单分散氨基功能化氧化硅球(AFS),再利用水热法合成了AFS石墨烯气凝胶复合材料(AFSGA)。利用X射线衍射、显色反应、扫描电镜、红外光谱等手段对AFS和AFSGA进行表征,考察了催化剂用量、有机硅源的种类及硅酸乙酯与硅源的加入比例等因素对AFS的形貌、表面结构与性质以及对重金属离子吸附性能的影响。采用X射线荧光法测试了AFS和AFSGA对多种重金属离子的吸附特性,二者对Hg²⁺的吸附量分别为142.3和102.84 mg/g。单分散AFS是一种合成流程便捷、应用经济性优异的吸附材料,而超轻、结构稳定性良好的AFSGA更具有易于回收与重复利用的应用优势。     

Effect of Colloidal Silica on the Porous Structure Parameters of Microspheres Prepared from Urea Formaldehyde Resin and Silica Gel

The paper concerns studies of the porous structure of spherical microparticles resulting from the polycondensation of urea and formaldehyde in the presence of silica sol (UFR–SG) and silica gel microspheres prepared from the latter. It is disclosed that, when the content of colloidal silica increases, the specific surface area of UFR–SG system rises and the porous structure (pore size distribution) of the obtained silica gel microspheres becomes more uniform.     

模板法制备大孔硅胶微球及其在高效液相色谱蛋白质分离中的应用

以弱阳离子交换聚合物微球(WCX)为模板、N-三甲氧基硅基丙基-N,N,N-三甲基氯化铵(TMSPTMA)为结构导向剂、四乙氧基硅烷(TEOS)为硅胶前驱体,在三乙醇胺弱碱催化作用下,水解缩合形成有机聚合物与二氧化硅复合微球,将此复合微球煅烧后得到大孔二氧化硅微球。探索了不同反应条件对二氧化硅微球的形貌、表面结构和分散性的影响;当TMSPTMA、TEOS与三乙醇胺的体积比为1∶2∶2时可以得到孔径在50~150 nm之间、粒径在2μm左右的硅胶微球。对所制备的大孔硅胶微球表面进行C18(十八烷基二甲基氯硅烷)键合修饰,然后将键合的填料装填到50 mm×4.6 mm的色谱柱中,考察了其对常见的几种标准蛋白质和市售大豆分离蛋白质的分离效果,结果显示这种填料在高效液相色谱蛋白质分离中具有一定的潜力。     

Synthesis and characterization of micrometer‐sized particles of narrow size distribution with chloromethyl functionality on the basis of single‐step swelling of uniform polystyrene template microspheres

Polystyrene template microspheres of 1.4 ± 0.1 μm were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2‐methoxy ethanol. These template particles were then swelled at room temperature in a single step with emulsion that was prepared in sodium dodecyl sulfate aqueous solution from a swelling solvent (dibutyl phthalate) containing the initiator (benzoyl peroxide) and monomer(s) (chlormethylstyrene, divinylbenzene, or ethylene dimethacrylate). Composite uniform particles composed of the template polystyrene and noncrosslinked or crosslinked polychloromethylstyrene were prepared by polymerizing the monomer(s) within the swelled particles at 73 °C. Crosslinked uniform polychloromethylstyrene particles of higher surface area were formed by dissolving the template polystyrene polymer of the composite particles. The influence of various reaction parameters, such as dibuthyl phthalate concentration, chloromethylstyrene concentration, crosslinker type and concentration, and so forth on the molecular weight, size, size distribution, shape, morphology, surface area, and decomposition temperature of the particles was investigated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1342–1352, 2002     

Synthesis of functional magnetic porous SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript>/P(St-DVB-MAA) microspheres by a novel suspension polymerization

In this study, a novel and effective suspension polymerization has been employed to prepare functional magnetic porous SrFe₁₂O₁₉/P(St-DVB-MAA) microspheres in the presence of bilayer surfactants (sodium dodecyl benzene sulfonate (SDBS) and oleic acid (OA)) coated on micro-size magnetic SrFe₁₂O₁₉. This was achieved by pre-polymerizing the organic phase, which contained co-monomers, porogens and treated magnetic particles, at 65°C for 0.5 h under ultrasound conditions. Aqueous solutions containing a dispersion agent were then added to effect suspension polymerization. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and magnetic property measurement system (MPMS) were used to characterize the functional magnetic porous microspheres. The results show that the microparticles are well shaped with a uniform size distribution of about 0.5 ∼ 0.7 mm and the surfaces of the microspheres have many micro-pores with an average diameter of 0.533 μm. There are carboxyl groups (−COOH) on the surface of the microspheres to the extent of 0.65 mmol g⁻¹, as determined by conductometric titration. According to the XRD spectra, iron oxide consists mainly of SrFe₁₂O₁₉ which reveals hexahedral structure. The content of magnetic SrFe₁₂O₁₉ reaches 17.81% (by mass), and the microspheres have good heat resistance. The magnetic porous microspheres are ferromagnetic with high residual magnetization and coercivity, 21.59 emu g⁻¹ and 4.13 kOe, respectively. The saturation magnetisation is around 42.85 emu g⁻¹.      

二苯胺磺酸钠还原法制备粒径可控的金纳米粒子

采用二苯胺磺酸钠还原四氯合金酸的方法,在室温条件下,用SDS(十二烷基硫酸钠)、SDBS(十二烷基苯磺酸钠)作表面活性剂,成功地合成了金纳米粒子.分别讨论了还原剂二苯胺磺酸钠、表面活性剂(SDS、SDBS)及四氯台金酸的浓度等对金纳米粒子的粒径和形貌的影响.通过控制反应条件,可以合成出平均粒径大约为10、14、30、36nm的金纳米粒子.利用透射电镜(TEN)、紫外-可见(UV-Vis)吸收光谱对金纳米粒子进行了表征.研究结果表明不同的SDS或SDBS/HAuCl4的摩尔比,对金纳米粒子的尺寸大小有影响.     

Reparation of silica/poly(methacrylic acid)/poly(divinylbenzene-co-methacrylic acid) tri-layer microspheres and the corresponding hollow polymer microspheres with movable silica core

 Hollow poly(divinylbenzene-co-methacrylic acid) (P(DVB-co-MAA)) microspheres were prepared by the selective dissolution of the non-crosslinked poly(methacrylic acid) (PMAA) mid-layer in ethanol from the corresponding silica/PMAA/P(DVB-co-MAA) tri-layer hybrid microspheres, which were afforded by a three-stage reaction. Silica/PMAA core-shell hybrid microspheres were prepared by the second-stage distillation polymerization of methacrylic acid (MAA) via the capture of the oligomers and monomers with the aid of the vinyl groups on the surface of 3-(methacryloxy)propyl trimethoxysilane (MPS)-modified silica core, which was prepared by the Stöber hydrolysis as the first stage reaction. The tri-layer hybrid microspheres were synthesized by the third-stage distillation precipitation copolymerization of functional MAA monomer and divinylbenzene (DVB) crosslinker in presence of silica/PMAA particles as seeds, in which the efficient hydrogen-bonding interaction between the carboxylic acid groups played as a driving force for the construction of monodisperse hybrid microspheres with tri-layer structure. The morphology and the structure of silica core, silica/PMAA core-shell particles, the tri-layer hybrid microspheres and the corresponding hollow polymer microspheres with movable silica cores were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy (XPS).     

十八烷/聚(St-MMA)相变微胶囊制备及表征

采用乳液聚合的方法,分别选取聚苯乙烯(PS)、聚甲基丙烯酸甲酯(PMMA)或苯乙烯和甲基丙烯酸甲酯的共聚物为壁材,正十八烷为芯材,十二烷基苯磺酸钠(SDBS)为乳化剂,制作相变储能微胶囊。用粒径分析仪、透射电子显微镜(TEM)、热重分析仪(TG)和示差扫描量热测试仪(DSC)对微胶囊的形貌、相变热性能和热稳定性分别进行表征。结果表明:壁材选取两者共聚物,当两种单体的比例为St∶MMA=1∶5,SDBS用量为1.5g(总质量的3%)时,微胶囊粒径大小均匀,粒子分散性好,壁材的包裹性好。微胶囊的放热峰为起始温度为27.3℃,终止温度为31.9℃,相变温度为28.9℃,相变焓为48.4J/g。TG表明长期使用温度不能超过131℃。IR分析微胶囊中含有芯材和壁材。这种十八烷/聚(St-MMA)相变微胶囊可以用于诸能材料。     

Encapsulation of Water-Soluble Dye in Spherical Sol-Gel Silica Matrices

The water-soluble, Lithol rubine B, dye was encapsulated into silica microspheres matrices. Encapsulation has been carried out by sol-gel process of W/O microemulsions formed from sodium silicate and dye aqueous solution in cyclohexane medium. The average particle size could be tailored from 1–10 m, depending on the processing parameter such as homogenizing speed in the formation of W/O emulsion, the weight ratio of water to oil, and concentration of sodium silicate solution, etc. The pore size of dye-doped silica microspheres was measured by nitrogen adsorption-desorption isotherms. The leaching behavior of dye entrapped in silica matrices was investigated by UV/VIS and UV diffuse reflectance spectroscopy for the extract and solid powders after immersion for 24 h in water. The doping of GPTS (3-glycidoxypropyltrimethoxysilane) in sodium silicate and dye mixture solution greatly enhanced the stability against leaching of the dye. It was ascribed that GPTS serves simultaneously as an intermediate for the chemical bonding between the dye and silica, and as an agent for the formation of hybrid sol responsible for the shrinkage of pore size.