Quaternary Iron Nickel Cobalt Selenide as an Efficient Electrocatalyst for Both Quasi‐Solid‐State Dye‐Sensitized Solar Cells and Water Splitting

Iron nickel cobalt selenides are synthesized through a one‐step hydrothermal method. Quaternary Fe_0.37Ni_0.17Co_0.36Se demonstrates multifunctionality and shows high electrocatalytic activity for quasi‐solid‐state dye‐sensitized solar cells with a power conversion efficiency of 8.42 %, the hydrogen evolution reaction, the oxygen evolution reaction, and water splitting. The electric power output from tandem quasi‐solid‐state dye‐sensitized solar cells under one‐sun illumination is sufficient to split water and exhibits a solar‐to‐hydrogen conversion efficiency of 5.58 % with Fe_0.37Ni_0.17Co_0.36Se as the electrocatalyst in this integrated system. Owing to a remarkable synergistic effect, quaternary Fe_0.37Ni_0.17Co_0.36Se is proven to be superior to ternary nickel cobalt selenide in terms of conductivity, electrocatalytic activity, and photovoltaic performance.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Folded nanosheet-like Co<Subscript>0.85</Subscript>Se array for overall water splitting

Active, stable, and earth-abundant bifunctional electrocatalyst for overall water splitting is pivotal to actualize large-scale water splitting via electrolysis. In this work, the hierarchical folded nanosheet-like Co_0.85Se array on Ni foam is constructed by liquid-phase chemical conversion with cobalt precursor nanorod array. It can serve as an efficient bifunctional electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte, with a current density of 10 mA cm^?2 at overpotential of 232 mV for OER and 129 mV for HER and Tafel slope of 78.9 mV dec^?1 for OER and 95.0 mV dec^?1 for HER, respectively. The two-electrode alkaline water electrolyzer utilizing this folded nanosheet-like Co_0.85Se array as both anode and cathode toward overall water splitting offered a current of 10 mA cm^?2 at a cell voltage of 1.60 V. This work explores an efficient and low-cost electrocatalyst for overall water splitting application in alkaline electrolytes.     

Fe‐Doped Ni3C Nanodots in N‐Doped Carbon Nanosheets for Efficient Hydrogen‐Evolution and Oxygen‐Evolution Electrocatalysis

Uniform Ni₃C nanodots dispersed in ultrathin N‐doped carbon nanosheets were successfully prepared by carburization of the two dimensional (2D) nickel cyanide coordination polymer precursors. The Ni₃C based nanosheets have lateral length of about 200 nm and thickness of 10 nm. When doped with Fe, the Ni₃C based nanosheets exhibited outstanding electrocatalytic properties for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). For example, 2 at % Fe (atomic percent) doped Ni₃C nanosheets depict a low overpotential (292 mV) and a small Tafel slope (41.3 mV dec⁻¹) for HER in KOH solution. An outstanding OER catalytic property is also achieved with a low overpotential of 275 mV and a small Tafel slope of 62 mV dec⁻¹ in KOH solution. Such nanodot‐incorporated 2D hybrid structures can serve as an efficient bifunctional electrocatalyst for overall water splitting.     

Fabrication of NiC/MoC/NiMoO4 Heterostructured Nanorod Arrays as Stable Bifunctional Electrocatalysts for Efficient Overall Water Splitting

Developing noble‐metal‐free, earth‐abundant, highly active, and stable electrocatalysts with high efficiency for both hydrogen and oxygen evolution reactions is of great importance for the development of overall water‐splitting devices, but still remains a challenging issue. Herein, a 3D heterostructured NiC/MoC/NiMoO₄ electrocatalyst was prepared through a facile synthetic procedure. The electrocatalyst shows a superior catalytic activity and stability toward the hydrogen and oxygen evolution reactions. The optimized NiC/MoC/NiMoO₄ catalyst presents low overpotentials of 68 and 280 mV to reach a current density of 10 mA cm^?2 in 1.0 m KOH for the hydrogen and oxygen evolution reactions, respectively. Assembled as an electrolyzer for overall water splitting, such a heterostructure shows quite a low cell voltage of 1.52 V at 10 mA cm^?2 and remarkable stability for more than 20 h. This work provides a facile but efficient approach for the design and preparation of highly efficient bifunctional and self‐supported heterostructured electrocatalysts that can serve as promising candidates in electrochemical energy storage and conversion.     

Molybdenum‐tungsten Oxide Nanowires Rich in Oxygen Vacancies as An Advanced Electrocatalyst for Hydrogen Evolution

Electrolysis of water is a promising way to produce hydrogen fuel in large scale. The commercialization of this technology requires highly efficient non‐noble metal electrocatalysts to decease the energy input for the hydrogen evolution reaction (HER). In this work, a novel nanowire structured molybdenum‐tungsten bimetallic oxide (CTAB‐D‐W₄MoO₃) is synthesized by a simple hydrothermal method followed with post annealing treatment. The obtained metal oxides feature with enhanced conductivity, rich oxygen vacancies and customized electronic structure. As such, the composite electrocatalyst exhibits excellent electrocatalytic performance for HER in an acidic environment, achieving a large current density of 100 mA cm^?2 at overpotential of only 286 mV and a small Tafel slope of 71.2 mV dec^?1. The excellent electrocatalytic HER performance of CTAB‐D‐W₄MoO₃ is attributed to the unique nanowire structure, rich catalytic active sites and promoted electron transfer rate.     

Intercalated Iridium Diselenide Electrocatalysts for Efficient pH‐Universal Water Splitting

Developing bifunctional catalysts for both hydrogen and oxygen evolution reactions is a promising approach to the practical implementation of electrocatalytic water splitting. However, most of the reported bifunctional catalysts are only applicable to alkaline electrolyzer, although a few are effective in acidic or neutral media that appeals more to industrial applications. Here, a lithium‐intercalated iridium diselenide (Li‐IrSe₂) is developed that outperformed other reported catalysts toward overall water splitting in both acidic and neutral environments. Li intercalation activated the inert pristine IrSe₂ via bringing high porosities and abundant Se vacancies for efficient hydrogen and oxygen evolution reactions. When Li‐IrSe₂ was assembled into two‐electrode electrolyzers for overall water splitting, the cell voltages at 10 mA cm^?2 were 1.44 and 1.50 V under pH 0 and 7, respectively, being record‐low values in both conditions.     

From a Molecular 2Fe‐2Se Precursor to a Highly Efficient Iron Diselenide Electrocatalyst for Overall Water Splitting

A highly active FeSe₂ electrocatalyst for durable overall water splitting was prepared from a molecular 2Fe‐2Se precursor. The as‐synthesized FeSe₂ was electrophoretically deposited on nickel foam and applied to the oxygen and hydrogen evolution reactions (OER and HER, respectively) in alkaline media. When used as an oxygen‐evolution electrode, a low 245 mV overpotential was achieved at a current density of 10 mA cm⁻², representing outstanding catalytic activity and stability because of Fe(OH)₂/FeOOH active sites formed at the surface of FeSe₂. Remarkably, the system is also favorable for the HER. Moreover, an overall water‐splitting setup was fabricated using a two‐electrode cell, which displayed a low cell voltage and high stability. In summary, the first iron selenide material is reported that can be used as a bifunctional electrocatalyst for the OER and HER, as well as overall water splitting.     

Two-Dimensional NiIr@N-Doped Carbon Nanocomposites Supported on Ni Foam for Electrocatalytic Overall Water Splitting

Electrochemical water splitting can provide a promising avenue for sustainable hydrogen production. Highly efficient electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are extremely important for the practical application of water splitting technology. Herein, a one-step annealing strategy is reported for the fabrication of a metal–organic framework-derived bifunctional self-supported electrocatalyst, which is composed of two-dimensional N-doped carbon-wrapped Ir-doped Ni nanoparticle composites supported on Ni foam (NiIr@N-C/NF). The resultant NiIr@N-C/NF displays excellent electrocatalytic performance in 1.0 m KOH, with low overpotentials of 32 mV at 10 mA cm⁻² for the HER and 329 mV at 50 mA cm⁻² for the OER. Particularly, the HER-OER bifunctional NiIr@N-C/NF needs only 1.50 V to yield 10 mA cm⁻² for overall water splitting.     

Controlled Synthesis of Cr‐Co0.85Se Nanoarrays for Water Splitting at an Ultralow Cell Voltage of 1.43 V

Water splitting has attracted more and more attention as a promising strategy for the production of clean hydrogen fuel. In this work, a new synthesis strategy was proposed, and Co_0.85Se was synthesized on nickel foam as the main matrix. The doping of appropriate Cr amount into the target of Co_0.85Se and the Cr‐Co_0.85Se resulted in an excellent electrochemical performance. The doping of Cr introduces Cr³⁺ ions which substitute Co²⁺ and Co³⁺ ions in Co_0.85Se, so that the lattice parameters of the main matrix were changed. It is worth noting that the Cr0.15‐Co_0.85Se/NF material exhibits an excellent performance in the oxygen evolution reaction (OER) test. When the current density reaches 50 mA cm^?2 for OER, the overpotential is only 240 mV. For the hydrogen evolution reaction (HER) tests, the overpotential is only 117 mV to drive 10 mA cm^?2 of current density. Moreover, when the Cr0.15‐Co_0.85Se/NF material is used as a two‐electrode device for whole water splitting, the required cell voltage is only 1.43 V to reach a current density of 10 mA cm^?2, which is among the lowest values of the published catalysts up to now. In addition, the Cr0.15‐Co_0.85Se/NF catalyst also exhibits excellent stability during a long period of water splitting. The experimental result demonstrates that the change of the lattice structure has an obvious influence on the electrocatalytic activity of the material. When an external electric field is applied, it facilitates the rapid electron transfer rate and enhances the electrocatalytic performance and stability of the material.     

电化学形成的PtFeNi合金与含缺陷NiFe LDHs载体之间的电荷转移实现高效水分解

氢气是一种能量密度高,可完全燃烧的清洁能源.发展绿色制氢技术对于解决全球环境污染,二氧化碳排放等环境问题具有重要意义.电化学水分解被认为是一种清洁高效的制氢手段,可自恰于可再生能源的波动性,具有效率高、响应快、氢气纯度高等优点.然而,由于电化学反应过电位大及动力学缓慢的原因,驱动电化学水分解的能量消耗巨大.因此,开发高...     

Modulating the Electronic Structure of Porous Nanocubes Derived from Trimetallic Metal–Organic Frameworks to Boost Oxygen Evolution Reaction Performance

The preparation of noble metal‐free catalysts for water splitting is the key to low‐cost, sustainable hydrogen generation. Herein, through a pyrolysis‐oxidation process, we prepared a series of Co‐Fe‐Ni trimetallic oxidized carbon nanocubes (Co_1‐XFe_XNi‐OCNC) with a continuously changeable Co/Fe ratio (X=0, 0.1, 0.2, 0.5, 0.8, 0.9, 1). The Co_1‐XFe_XNi‐OCNC shows a volcano‐type oxygen evolution reaction (OER) activity. The optimized Co_0.1Fe_0.9Ni‐OCNC achieves a low overpotential of 268 mV at 10 mA cm^?2 with a very low Tafel slope of 48 mV dec^?1 in 1 m KOH. At the same time, the stability of the Co_0.1Fe_0.9Ni‐OCNC is also outstanding; after 1000 CV cycles, the LSV plot is almost coincident. Moreover, the potential remains almost of the same value at 10 mA cm^?2 after 12 h in comparison to the initial value. The excellent electrocatalytic properties can be attributed to the synergistic cooperation between each component. Therefore, the Co_0.1Fe_0.9Ni‐OCNC is a promising candidate instead of precious metal‐based electrocatalysts for OER.     

NiMn‐Based Bimetal–Organic Framework Nanosheets Supported on Multi‐Channel Carbon Fibers for Efficient Oxygen Electrocatalysis

Developing noble‐metal‐free bifunctional oxygen electrocatalysts is of great significance for energy conversion and storage systems. Herein, we have developed a transformation method for growing NiMn‐based bimetal–organic framework (NiMn‐MOF) nanosheets on multi‐channel carbon fibers (MCCF) as a bifunctional oxygen electrocatalyst. Owing to the desired components and architecture, the MCCF/NiMn‐MOFs manifest comparable electrocatalytic performance towards oxygen reduction reaction (ORR) with the commercial Pt/C electrocatalyst and superior performance towards oxygen evolution reaction (OER) to the benchmark RuO₂ electrocatalyst. X‐ray absorption fine structure (XAFS) spectroscopy and density functional theory (DFT) calculations reveal that the strong synergetic effect of adjacent Ni and Mn nodes within MCCF/NiMn‐MOFs effectively promotes the thermodynamic formation of key *O and *OOH intermediates over active NiO₆ centers towards fast ORR and OER kinetics.     

The Proportion of Fe‐NX,N Doping Species and Fe3C to Oxygen Catalytic Activity in Core‐Shell Fe‐N/C Electrocatalyst

A bifunctional oxygen electrocatalyst composed of iron carbide (Fe₃C) nanoparticles encapsulated by nitrogen doped carbon sheets is reported. X‐ray photoelectron spectroscopy and X‐ray absorption near edge structure revealed the presence of several kinds of active sites (Fe?N_x sites, N doping sites) and the modulated electron structure of nitrogen doped carbon sheets. Fe₃C@N‐CSs shows excellent oxygen evolution and oxygen reduction catalytic activity owing to the modulated electron structure by encapsulated Fe₃C core via biphasic interfaces electron interaction, which can lower the free energy of intermediate, strengthen the bonding strength and enhance conductivity. Meanwhile, the contribution of the Fe?N_x sites, N doping sites and the effect of Fe₃C core for the electrocatalytic oxygen reaction is originally revealed. The Fe₃C@N‐CSs air electrode‐based zinc‐air battery demonstrates a high open circuit potential of 1.47 V, superior charge‐discharge performance and long lifetime, which outperforms the noble metal‐based zinc‐air battery.     

Boosting Electrocatalytic Hydrogen Evolution over Metal–Organic Frameworks by Plasmon‐Induced Hot‐Electron Injection

Efficient hydrogen evolution via electrocatalytic water splitting holds great promise in modern energy devices. Herein, we demonstrate that the localized surface plasmon resonance (LSPR) excitation of Au nanorods (NRs) dramatically improves the electrocatalytic hydrogen evolution activity of CoFe‐metal–organic framework nanosheets (CoFe‐MOFNs), leading to a more than 4‐fold increase of current density at ?0.236 V (vs. RHE) for Au/CoFe‐MOFNs composite under light irradiation versus in dark. Mechanistic investigations reveal that the hydrogen evolution enhancement can be largely attributed to the injection of hot electrons from AuNRs to CoFe‐MOFNs, raising the Fermi level of CoFe‐MOFNs, facilitating the reduction of H₂O and affording decreased activation energy for HER. This study highlights the superiority of plasmonic excitation on improving electrocatalytic efficiency of MOFs and provides a novel avenue towards the design of highly efficient water‐splitting systems under light irradiation.     

Nitrogen,Phosphorus, and Fluorine Tri‐doped Graphene as a Multifunctional Catalyst for Self‐Powered Electrochemical Water Splitting

Electrocatalysts are required for clean energy technologies (for example, water‐splitting and metal‐air batteries). The development of a multifunctional electrocatalyst composed of nitrogen, phosphorus, and fluorine tri‐doped graphene is reported, which was obtained by thermal activation of a mixture of polyaniline‐coated graphene oxide and ammonium hexafluorophosphate (AHF). It was found that thermal decomposition of AHF provides nitrogen, phosphorus, and fluorine sources for tri‐doping with N, P, and F, and simultaneously facilitates template‐free formation of porous structures as a result of thermal gas evolution. The resultant N, P, and F tri‐doped graphene exhibited excellent electrocatalytic activities for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The trifunctional metal‐free catalyst was further used as an OER–HER bifunctional catalyst for oxygen and hydrogen gas production in an electrochemical water‐splitting unit, which was powered by an integrated Zn–air battery based on an air electrode made from the same electrocatalyst for ORR. The integrated unit, fabricated from the newly developed N, P, and F tri‐doped graphene multifunctional metal‐free catalyst, can operate in ambient air with a high gas production rate of 0.496 and 0.254 μL s⁻¹ for hydrogen and oxygen gas, respectively, showing great potential for practical applications.     

Nitrogen,Phosphorus, and Fluorine Tri‐doped Graphene as a Multifunctional Catalyst for Self‐Powered Electrochemical Water Splitting

Electrocatalysts are required for clean energy technologies (for example, water‐splitting and metal‐air batteries). The development of a multifunctional electrocatalyst composed of nitrogen, phosphorus, and fluorine tri‐doped graphene is reported, which was obtained by thermal activation of a mixture of polyaniline‐coated graphene oxide and ammonium hexafluorophosphate (AHF). It was found that thermal decomposition of AHF provides nitrogen, phosphorus, and fluorine sources for tri‐doping with N, P, and F, and simultaneously facilitates template‐free formation of porous structures as a result of thermal gas evolution. The resultant N, P, and F tri‐doped graphene exhibited excellent electrocatalytic activities for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The trifunctional metal‐free catalyst was further used as an OER–HER bifunctional catalyst for oxygen and hydrogen gas production in an electrochemical water‐splitting unit, which was powered by an integrated Zn–air battery based on an air electrode made from the same electrocatalyst for ORR. The integrated unit, fabricated from the newly developed N, P, and F tri‐doped graphene multifunctional metal‐free catalyst, can operate in ambient air with a high gas production rate of 0.496 and 0.254 μL s^?1 for hydrogen and oxygen gas, respectively, showing great potential for practical applications.     

Redox‐Inert Fe3+ Ions in Octahedral Sites of Co‐Fe Spinel Oxides with Enhanced Oxygen Catalytic Activity for Rechargeable Zinc–Air Batteries

Bimetallic cobalt‐based spinel is sparking much interest, most notably for its excellent bifunctional performance. However, the effect of Fe³⁺ doping in Co₃O₄ spinel remains poorly understood, mainly because the surface state of a catalyst is difficult to characterize. Herein, a bifunctional oxygen electrode composed of spinel Co₂FeO₄/(Co_0.72Fe_0.28)_Td(Co_1.28Fe_0.72)_OctO₄ nanoparticles grown on N‐doped carbon nanotubes (NCNTs) is designed, which exhibits superior performance to state‐of‐the‐art noble metal catalysts. Theoretical calculations and magnetic measurements reveal that the introduction of Fe³⁺ ions into the Co₃O₄ network causes delocalization of the Co 3d electrons and spin‐state transition. Fe³⁺ ions can effectively activate adjacent Co³⁺ ions under the action of both spin and charge effect, resulting in the enhanced intrinsic oxygen catalytic activity of the hybrid spinel Co₂FeO₄. This work provides not only a promising bifunctional electrode for zinc–air batteries, but also offers a new insight to understand the Co‐Fe spinel oxides for oxygen electrocatalysis.     

Anodic Hydrazine Oxidation Assists Energy‐Efficient Hydrogen Evolution over a Bifunctional Cobalt Perselenide Nanosheet Electrode

Water electrolysis is a promising source of hydrogen; however, technological challenges remain. Intensive efforts have focused on developing highly efficient and earth‐abundant electrocatalysts for water splitting. An effective strategy is proposed, using a bifunctional tubular cobalt perselenide nanosheet electrode, in which the sluggish oxygen evolution reaction is substituted with anodic hydrazine oxidation so as to assist energy‐efficient hydrogen production. Specifically, this electrode produces a current density of 10 mA cm^?2 at ?84 mV for hydrogen evolution and ?17 mV for hydrazine oxidation in 1.0 m KOH and 0.5 m hydrazine electrolyte. An ultralow cell voltage of only 164 mV is required to generate a current density of 10 mA cm^?2 for 14 hours of stable water electrolysis.     

Bifunctional Electrocatalysts for Overall Water Splitting from an Iron/Nickel‐Based Bimetallic Metal–Organic Framework/Dicyandiamide Composite

Pyrolysis of a bimetallic metal–organic framework (MIL‐88‐Fe/Ni)‐dicyandiamide composite yield a Fe and Ni containing carbonaceous material, which is an efficient bifunctional electrocatalyst for overall water splitting. FeNi₃ and NiFe₂O₄ are found as metallic and metal oxide compounds closely embedded in an N‐doped carbon–carbon nanotube matrix. This hybrid catalyst (Fe‐Ni@NC‐CNTs) significantly promotes the charge transfer efficiency and restrains the corrosion of the metallic catalysts, which is shown in a high OER and HER activity with an overpotential of 274 and 202 mV, respectively at 10 mA cm^?2 in alkaline solution. When this bifunctional catalyst was further used for H₂ and O₂ production in an electrochemical water‐splitting unit, it can operate in ambient conditions with a competitive gas production rate of 1.15 and 0.57 μL s^?1 for hydrogen and oxygen, respectively, showing its potential for practical applications.