Controlled Synthesis of Cr‐Co0.85Se Nanoarrays for Water Splitting at an Ultralow Cell Voltage of 1.43 V

Water splitting has attracted more and more attention as a promising strategy for the production of clean hydrogen fuel. In this work, a new synthesis strategy was proposed, and Co_0.85Se was synthesized on nickel foam as the main matrix. The doping of appropriate Cr amount into the target of Co_0.85Se and the Cr‐Co_0.85Se resulted in an excellent electrochemical performance. The doping of Cr introduces Cr³⁺ ions which substitute Co²⁺ and Co³⁺ ions in Co_0.85Se, so that the lattice parameters of the main matrix were changed. It is worth noting that the Cr0.15‐Co_0.85Se/NF material exhibits an excellent performance in the oxygen evolution reaction (OER) test. When the current density reaches 50 mA cm^?2 for OER, the overpotential is only 240 mV. For the hydrogen evolution reaction (HER) tests, the overpotential is only 117 mV to drive 10 mA cm^?2 of current density. Moreover, when the Cr0.15‐Co_0.85Se/NF material is used as a two‐electrode device for whole water splitting, the required cell voltage is only 1.43 V to reach a current density of 10 mA cm^?2, which is among the lowest values of the published catalysts up to now. In addition, the Cr0.15‐Co_0.85Se/NF catalyst also exhibits excellent stability during a long period of water splitting. The experimental result demonstrates that the change of the lattice structure has an obvious influence on the electrocatalytic activity of the material. When an external electric field is applied, it facilitates the rapid electron transfer rate and enhances the electrocatalytic performance and stability of the material.     

From a Molecular 2Fe‐2Se Precursor to a Highly Efficient Iron Diselenide Electrocatalyst for Overall Water Splitting

A highly active FeSe₂ electrocatalyst for durable overall water splitting was prepared from a molecular 2Fe‐2Se precursor. The as‐synthesized FeSe₂ was electrophoretically deposited on nickel foam and applied to the oxygen and hydrogen evolution reactions (OER and HER, respectively) in alkaline media. When used as an oxygen‐evolution electrode, a low 245 mV overpotential was achieved at a current density of 10 mA cm⁻², representing outstanding catalytic activity and stability because of Fe(OH)₂/FeOOH active sites formed at the surface of FeSe₂. Remarkably, the system is also favorable for the HER. Moreover, an overall water‐splitting setup was fabricated using a two‐electrode cell, which displayed a low cell voltage and high stability. In summary, the first iron selenide material is reported that can be used as a bifunctional electrocatalyst for the OER and HER, as well as overall water splitting.     

Ni<Subscript>0.37</Subscript>Co<Subscript>0.63</Subscript>S<Subscript>2</Subscript>-reduced graphene oxide nanocomposites for highly efficient electrocatalytic oxygen evolution and photocatalytic pollutant degradation

A series of Ni_0.37Co_0.63S₂-reduced graphene oxide nanocomposites with different graphene contents (NCS@rGO-x) has been successfully prepared via a facile one-step hydrothermal method and applied as the catalysts for the oxygen evolution reaction (OER) and degradation of organic pollutants. The XRD and FESEM analyses revealed that the phase structure and morphology of NCS nanoparticles were substantially influenced by the graphene contents. The phase structure of NCS nanoparticles gradually transformed from primary NiCo₂S₄ to Ni_0.37Co_0.63S₂ and the morphology and size of NCS nanoparticles were found to become more regular and homogeneous with the increase of graphene concentration. On the NCS@rGO-x nanocomposites, the NCS@rGO-2 sample demonstrated the best catalytic activity toward the OER, which delivers a stable current density of 10 mA cm^?2 at a small overpotential of ～276 mV (vs. RHE) with a Tafel slope as low as 48 mV dec^?1. Furthermore, the NCS@rGO-2 sample showed the remarkable photocatalytic activity for degradation of methylene blue (MB), which may be attributed to the increased reaction sites and high separation efficiency of photogenerated charge carries due to the electronic interaction between NCS nanoparticles and rGO. All these impressive performances indicate that the NCS@rGO-2 nanocomposite is a promising catalyst in energy and environmental fields.

Open image in new window

Graphical abstract A series of Ni_0.37Co_0.63S₂-reduced graphene oxide nanocomposites with different graphene contents has been successfully prepared and applied as the catalysts for the oxygen evolution reaction (OER) and degradation of organic pollutants. The NCS@rGO-2 catalyst-modified stainless steel wire mesh (SSWM) electrode delivers a stable current density of 10 mA cm^?2 at a small overpotential of ～276 mV (vs. RHE) with a Tafel slope as low as 48 mV dec^?1. At the same time, the NCS@rGO-2 catalyst is also first investigated as an efficient photocatalyst for degradation of MB.

     

Composite electrocatalyst Mo<Subscript>x</Subscript>W<Subscript>1-x</Subscript>S<Subscript>2</Subscript> nanosheets on carbon fiber paper for highly efficient hydrogen evolution reaction

Molybdenum disulfide (MoS₂) or tungsten disulfide (WS₂), as a promising catalyst, is widely investigated for hydrogen evolution reaction (HER). In this work, a composite electrocatalysts Mo_xW_1-xS₂ is successfully decorated on carbon fiber paper (CFP) through a facile hydrothermal method. The three-dimensional porous CFP can enable the diffusion and penetration of electrolyte. Comparing with MoS₂ and WS₂ catalyst, the composite electrocatalyst Mo_xW_1-xS₂ nanosheets can expose the large number of electrochemically active sites. Hence, the as-prepared Mo_xW_1-xS₂/CFP (3:1) exhibit the outstanding HER catalytic activity with the small Tafel slope of 68 mV dec^?1 and the low overpotential of ??178.4?±?0.5 mV at a current density of 10 mA cm^?2. Chronoamperometric current test for 18 h confirm the long-term stability of the composite electrocatalyst.     

Molybdenum-induced tuning 3d-orbital electron filling degree of CoSe2 for alkaline hydrogen and oxygen evolution reactions

The development of high-performance non-precious metal-based robust bifunctional electrocatalyst for both hydrogen evolution reaction(HER) and oxygen evolution reactions(OER) in alkaline media is essential for the electrochemical overall water splitting technologies. Herein, we demonstrate that the HER/OER performance of Co Se₂ can be significantly enhanced by tuning the 3d-orbital electron filling degree through Mo doping. Both density functional theory(DFT) calculations and experime...     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Hierarchical NiCo2O4 Hollow Microcuboids as Bifunctional Electrocatalysts for Overall Water‐Splitting

Bifunctional electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte may improve the efficiency of overall water splitting. Nickel cobaltite (NiCo₂O₄) has been considered a promising electrode material for the OER. However, NiCo₂O₄ that can be used as an electrocatalyst in HER has not been studied yet. Herein, we report self‐assembled hierarchical NiCo₂O₄ hollow microcuboids for overall water splitting including both the HER and OER reactions. The NiCo₂O₄ electrode shows excellent activity toward overall water splitting, with 10 mA cm^?2 water‐splitting current reached by applying just 1.65 V and 20 mA cm^?2 by applying just 1.74 V across the two electrodes. The synthesis of NiCo₂O₄ microflowers confirms the importance of structural features for high‐performance overall water splitting.     

Electrodeposited Cobalt‐Phosphorous‐Derived Films as Competent Bifunctional Catalysts for Overall Water Splitting

One of the challenges to realize large‐scale water splitting is the lack of active and low‐cost electrocatalysts for its two half reactions: H₂ and O₂ evolution reactions (HER and OER). Herein, we report that cobalt‐phosphorous‐derived films (Co‐P) can act as bifunctional catalysts for overall water splitting. The as‐prepared Co‐P films exhibited remarkable catalytic performance for both HER and OER in alkaline media, with a current density of 10 mA cm^?2 at overpotentials of ?94 mV for HER and 345 mV for OER and Tafel slopes of 42 and 47 mV/dec, respectively. They can be employed as catalysts on both anode and cathode for overall water splitting with 100 % Faradaic efficiency, rivalling the integrated performance of Pt and IrO₂. The major composition of the as‐prepared and post‐HER films are metallic cobalt and cobalt phosphide, which partially evolved to cobalt oxide during OER.     

NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript>/rGO hybrid nanostructures for efficient electrocatalytic oxygen evolution

We report the synthesis of NiCo₂O₄/reduced graphene oxide (NiCo₂O₄/rGO) hybrid hierarchical structures with unique nanonet and microsphere morphologies by organic polar solvent-assisted solvothermal method. The electrocatalytic oxygen evolution reaction (OER) activity of these materials is studied by cyclic voltammetry, linear sweep voltammetry and chronoamperometry methods in O₂-saturated 0.1 M KOH solution. The NiCo₂O₄/rGO hybrid nanocomposite materials are found to be highly active electrocatalysts for OER at lower overpotentials. The nanonet and microsphere-like NiCo₂O₄/rGO catalysts require overpotentials of 0.450 and 0.530 V at a current density of 10 mA cm^?2, and their corresponding Tafel slopes are 53 and 62 mV dec^?1, which are much lower than values reported for non-precious electrocatalysts. Further, both NiCo₂O₄/rGO catalysts show good catalytic stability with current retention more than 92 % over long period of 15,000 s determined by chronoampirometry and at the end of 1000th cycle determined by linear sweep voltammetry. The enhanced OER activity of nanostructured NiCo₂O₄/rGO hybrid catalysts is attributed to synergistic interaction between rGO and NiCo₂O₄, which seems to be essential for maintaining the large contact area at the electrode-electrolyte interface, better mass, and charge transport and to minimize the aggregation of NiCo₂O₄ nanoparticles.     

Fe‐Doped Ni3C Nanodots in N‐Doped Carbon Nanosheets for Efficient Hydrogen‐Evolution and Oxygen‐Evolution Electrocatalysis

Uniform Ni₃C nanodots dispersed in ultrathin N‐doped carbon nanosheets were successfully prepared by carburization of the two dimensional (2D) nickel cyanide coordination polymer precursors. The Ni₃C based nanosheets have lateral length of about 200 nm and thickness of 10 nm. When doped with Fe, the Ni₃C based nanosheets exhibited outstanding electrocatalytic properties for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). For example, 2 at % Fe (atomic percent) doped Ni₃C nanosheets depict a low overpotential (292 mV) and a small Tafel slope (41.3 mV dec⁻¹) for HER in KOH solution. An outstanding OER catalytic property is also achieved with a low overpotential of 275 mV and a small Tafel slope of 62 mV dec⁻¹ in KOH solution. Such nanodot‐incorporated 2D hybrid structures can serve as an efficient bifunctional electrocatalyst for overall water splitting.     

Electrodeposited Co<Subscript>1-x</Subscript>Mo<Subscript>x</Subscript>S thin films as highly efficient electrocatalysts for hydrogen evolution reaction in acid medium

Efficient and cost-effective electrocatalysts for hydrogen evolution reaction (HER) are significant for the advancement of effective water splitting reaction. Herein, we describe the growth of cobalt molybdenum sulfide (CoMoS) at different composites of tightly packed nanocrystals, prepared by one step process of simple electrodeposition method on fluorine-doped tin oxide (FTO) substrate as highly active and low-cost HER electrocatalyst. The prepared electrocatalysts were characterized via various analytical techniques. The HER activity was evaluated through electrochemical methods such as cyclic voltammetry technique and impedance analysis. Exhaustive electrochemical examinations show that the Co_0.95Mo_0.05S achieved higher cathodic current density value of 14.3 mA/cm² at η?=?250 mV with a lowest Tafel slope value towards HER. Furthermore, the active surface area of the as-deposited composite materials has been calculated by cyclic voltammetry analysis. Hence, the present work illustrates that the Co_0.95Mo_0.05S composite can serve as an encouraging cost-effective substitute to platinum-based electrocatalyst for HER.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.     

Fabrication and characterisation of a mixed oxide-covered mesh electrode composed of NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> and its capability of generating hydroxyl radicals during the oxygen evolution reaction in electrolyte-free water

A mixed oxide-covered mesh electrode composed of NiCo₂O₄ (MOME-NiCo₂O₄) was prepared on a stainless-steel substrate using thermal decomposition (slow-cooling rate method). Surface, bulk and electrochemical properties of MOME were studied using different techniques, namely scanning electron microscopy (SEM), X-ray diffraction (XRD), cyclic voltammetry (CV) with determination of the electrochemical porosity (?) and morphology factor (φ) parameters, quasi-stationary polarisation curves (PC) and electrochemical impedance spectroscopy (EIS). SEM images revealed a good coverage of the metallic wires by a compact oxide layer (absence of cracks). XRD analysis confirmed the formation of the spinel NiCo₂O₄ with the presence of NiO. The ‘in situ’ surface parameters denoted as ? and φ exhibited values of 0.39 and 0.33, respectively, revealing that the electrochemically active surface area is mainly confined to the ‘outer/external’ surface regions of the oxide layer. The PC was characterised by two Tafel slopes distributed in the low (b ₁ = 46 mV dec^?1) and high (b ₂ = 59 mV dec^?1) overpotential domains. The corresponding apparent exchange current densities were j ₀₍₁₎ = (3.43 ± 0.11) × 10^?6 A cm^?2 and j ₀₍₂₎ = (6.70 ± 0.08) × 10^?6 A cm^?2, respectively. The EIS study accomplished in the low-overpotential domain revealed a Tafel slope (b ₁) of 51 mV dec^?1. According to the spin-trapping reaction using N,N-dimethyl-p-nitrosoaniline (RNO), the MOME-NiCo₂O₄ electrode exhibited good performance for the generation of weakly adsorbed hydroxyl radicals (HO^?) during the OER in electrolyte-free water.     

Bifunctional Electrocatalysts for Overall Water Splitting from an Iron/Nickel‐Based Bimetallic Metal–Organic Framework/Dicyandiamide Composite

Pyrolysis of a bimetallic metal–organic framework (MIL‐88‐Fe/Ni)‐dicyandiamide composite yield a Fe and Ni containing carbonaceous material, which is an efficient bifunctional electrocatalyst for overall water splitting. FeNi₃ and NiFe₂O₄ are found as metallic and metal oxide compounds closely embedded in an N‐doped carbon–carbon nanotube matrix. This hybrid catalyst (Fe‐Ni@NC‐CNTs) significantly promotes the charge transfer efficiency and restrains the corrosion of the metallic catalysts, which is shown in a high OER and HER activity with an overpotential of 274 and 202 mV, respectively at 10 mA cm^?2 in alkaline solution. When this bifunctional catalyst was further used for H₂ and O₂ production in an electrochemical water‐splitting unit, it can operate in ambient conditions with a competitive gas production rate of 1.15 and 0.57 μL s^?1 for hydrogen and oxygen, respectively, showing its potential for practical applications.     

Facile synthesis of single-crystalline Co<Subscript>3</Subscript>O<Subscript>4</Subscript> cubes as high-performance anode for lithium-ion batteries

Transition metal oxides have great potential as anode for lithium-ion batteries (LIBs), owing to their high theoretical capacity and low cost. However, the poor cycling stability and electron conductivity have limited the widely expected application of transition metal oxides. In this work, highly single-crystalline Co₃O₄ cubes with 400 nm in the average side length are successfully synthesized by a facile hydrothermal method. When used as anode for LIBs, the Co₃O₄ single-crystalline cubes exhibit highly stable and substantial discharge capacities of the amount to 877 mA h g^?1 at 200 mA g^?1 after 110 cycles with remarkable capacity retention of 98%, and 576 mA h g^?1 even at a high rate of 2000 mA g^?1. The scalability of the preparation method and the impressive results achieved here demonstrate the potential for the application to the future development of transition metal oxides anodes. These results suggest that the single-crystalline Co₃O₄ is a promising electrode material for the high-performance energy storage devices.     

Flower-like NiCo2S4/NiFeP/NF composite material as an effective electrocatalyst with high overall water splitting performance

Rational design and building of high efficiency, secure and inexpensive electrocatalyst is a pressing demand and performance to promote sustainable improvement of hydrogen energy. The bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution response (HER) with high catalytic performance and steadiness in the equal electrolyte are extra treasured and meaningful. Herein, a unique three-dimensional (3D) structure electrocatalyst for NiCo₂S₄ growing on the flower-like NiFeP was designed and synthesized in this study. The results show that the flower-like NiCo₂S₄/NiFeP/NF composite electrocatalyst has large specific surface area, appropriate electrical conductivity, and greater lively websites uncovered in the three-dimensional structure, and affords extraordinary electrocatalytic overall performance for the ordinary water splitting. In alkaline solution, the OER and HER overpotentials of NiCo₂S₄/NiFeP/NF only need 293 mV and 205 mV overpotential to provide the current densities of 100 mA/cm² and 50 mA/cm², respectively. This high electrocatalytic activity exceeds the catalytic activity of most nickel-iron based electrocatalysts for OER and HER process. Accordingly, the optimized NiCo₂S₄/NiFeP/NF sample has higher stability (24 h) at 1.560 and 10 mA/cm², which extensively speeds up the overall water splitting process. In view of the above performance, this work offers a fine approach for the further improvement of low fee and excessive effectivity electrocatalyst.     

Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications

A core‐shell structure with CuO core and carbon quantum dots (CQDs) and carbon hollow nanospheres (CHNS) shell was prepared through facile in‐situ hydrothermal process. The composite was used for non‐enzymatic hydrogen peroxide sensing and electrochemical overall water splitting. The core‐shell structure was established from the transmission electron microscopy image analysis. Raman and UV‐Vis spectroscopy analysis confirmed the interaction between CuO and CQDs. The electrochemical studies showed the limit of detection and sensitivity of the prepared composite as 2.4 nM and 56.72 μA μM^?1 cm^?2, respectively. The core‐shell structure facilitated better charge transportation which in turn exhibited elevated electro‐catalysis towards hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting. The overpotential of 159 mV was required to achieve 10 mA cm^?2 current density for HER and an overpotential of 322 mV was required to achieve 10 mA cm^?2 current density for OER in 1.0 M KOH. A two‐electrode system was constructed for overall water splitting reaction, which showed 10 and 50 mA cm^?2 current density at 1.83 and 1.96 V, respectively. The prepared CuO@CQDs@CHNS catalyst demonstrated excellent robustness in HER and OER catalyzing condition along with overall water splitting reaction. Therefore, the CuO@CQDs@CHNS could be considered as promising electro‐catalyst for H₂O₂ sensing, HER, OER and overall water splitting.     

MoSe2/Co-MOF/NF复合材料的制备及电催化产氧性能

设计高效的催化剂对于电解水制氢至关重要。基于过渡金属硒化物(TMSe)的高催化活性和金属有机骨架(MOFs)的灵活结构，我们提出了一种将MOFs与TMSe复合的策略，在导电基底泡沫镍(NF)上生长的复合材料不仅继承了2种单体的优点，还有效地改善了MOFs导电性差、TMSe易团聚的缺点。MoSe₂/Co-MOF/NF在碱性溶液中展示出优异的电催化产氧活性，在电流密度为10 mA·cm^-2时其过电位仅为242 mV，塔菲尔斜率仅为50.64 mV·dec^-1。此外，该材料在碱性溶液中经1 000圈循环伏安(CV)循环测试和30 h的恒电压电解测试均表现出良好的稳定性。     

MoSe2/Co-MOF/NF复合材料的制备及电催化产氧性能

设计高效的催化剂对于电解水制氢至关重要。基于过渡金属硒化物(TMSe)的高催化活性和金属有机骨架(MOFs)的灵活结构,我们提出了一种将MOFs与TMSe复合的策略,在导电基底泡沫镍(NF)上生长的复合材料不仅继承了2种单体的优点,还有效地改善了MOFs导电性差、TMSe易团聚的缺点。MoSe₂/Co-MOF/NF在碱性溶液中展示出优异的电催化产氧活性,在电流密度为10 mA·cm^-2时其过电位仅为242 mV,塔菲尔斜率仅为50.64 mV·dec^-1。此外,该材料在碱性溶液中经1 000圈循环伏安(CV)循环测试和30 h的恒电压电解测试均表现出良好的稳定性。