Stochastic Comparison of Age-Dependent Block Replacement Policies

The age-dependent block replacement policy is a modified block replacement policy with an age limit for preventive replacements. Under this policy, any failed component is repaired, but only the components whose ages exceed a fixed age limit are replaced preventively at the scheduled maintenance times. Using the compensator method, we compare stochastically the failure counting processes of the age-dependent block replacement policies with different parameters, and show that the age-dependent block replacement policy, although cost effective, leads to more failures than the age and block replacement policies. AMS 2000 Subject Classification 60K10     

Optimal periodic replacement policy for repairable products under free-repair warranty

This paper investigates the effects of a free-repair warranty on the periodic replacement policy for a repairable product. Cost models are developed for both a warranted and a non-warranted product, and the corresponding optimal periodic replacement policies are derived such that the long-run expected cost rate is minimized. For a product with an increasing failure rate function, structural properties of these optimal policies are obtained. By comparing these optimal policies, we show that the optimal replacement period for a warranted product should be adjusted toward the end of the warranty period. Finally, examples are given to numerically illustrate the impact of a product warranty on the optimal periodic replacement policy.     

An imperfect maintenance model with block replacements

We consider a model in which when a device fails it is either repaired to its condition prior to failure or replaced. Moreover, the device is replaced at times kT, k = 1, 2, … The decision to repair or replace the device at failure depends on the age of the device at failure. We find the optimal block time, T₀, that minimizes the long-run average cost of maintenance per unit time. Our results are shown to extend many of the well known results for block replacement policies.     

Asymptotic analysis of stochastic block replacement policies for multicomponent systems in a Markov environment

An asymptotic analysis of stochastic block replacement policies for a multicomponent system with fast Markov switches is provided. It is proved that this system can be approximated by a simpler system with exponential failures and averaged failure rates. The optimality of the long-run cost function is studied, as well.     

Quantifying the risk in age and block replacement policies

Preventive maintenance policies have been studied in the literature without considering the risk due to the cost variability. In this paper, we consider the two most popular preventive replacement policies, namely, age and block replacement policies under long-run average cost and expected unit time cost criteria. To quantify the risk in the preventive maintenance policies, we use the long-run variance of the accumulated cost over a time interval. We numerically derive the Risk-sensitive preventive replacement policies and study the impact of the Risk-sensitive optimality criterion on the managerial decisions. We also examine the performance of the expected unit time cost criterion as an alternative to the traditional long-run average cost criterion.     

Optimal inspection and replacement policies for multi-state deteriorating systems

In this paper, a phase-type approach is proposed to derive optimal inspection and replacement policies for semi-Markovian deteriorating systems. In this approach, the general sojourn time distributions of a semi-Markovian maintenance model are approximated by acyclic phase-type distributions. Using the approximation, a semi-Markovian maintenance model can be transformed into a Markovian maintenance model such that the analytical tractability of Markov processes can be preserved. Based on the Markovian model, algorithms are provided to derive the optimal state-dependent and state-age-dependent inspection and replacement policies such that the expected long-run cost rate is minimized. Furthermore, procedures are developed to implement the optimal policies on semi-Markovian deteriorating systems. The implementation of the optimal policies are illustrated by numerical examples.     

The availability model and parameters estimation method for the delay time model with imperfect maintenance at inspection

The delay time model (DTM) is widely used to model the two-stage failure process and is helpful for developing cost-effective inspection/maintenance plans. Imperfect maintenance is common in practice, but seldom considered in DTM. An improved DTM with imperfect maintenance at inspection has been developed based on the assumption of imperfect inspection maintenance and perfect failure maintenance. The model of the long-run availability for the improved DTM is established. Parameters estimation method and the test for goodness of fit method are given. Numerical simulations are performed to study the influence of imperfect maintenance on the long-run availability and to validate the credibility of the parameters estimation method. The results show that imperfect maintenance will decrease the long-run availability. The existence of the optimal inspection interval regarding the maximum long-run availability is tightly related to the improvement factor, which denotes the maintenance effect. The parameters estimation method proves credible. The maximum likelihood estimations of the reliability parameters can be easily achieved by the Genetic Algorithms (GAs) searching tool.     

有延迟修理的两部件串联系统的预防维修策略

研究由两个部件串联组成的系统的预防维修策略, 当系统的工作时间达到T时进行预防维修, 预防维修使部件恢复到上一次故障维修后的状态. 当部件发生故障后进行故障维修, 因为各种原因可能会延迟修理. 部件在每次故障维修后的工作时间形成随机递减的几何过程, 且每次故障后的维修时间形成随机递增的几何过程. 以部件进行预防维修的间隔T和更换前的故障次数N组成的二维策略(T,N)为策略, 利用更新过程和几何过程理论求出了系统经长期运行单位时间内期望费用的表达式, 并给出了具体例子和数值分析.     

Maintenance scheduling of a protection system subject to imperfect inspection and replacement

An inspection and replacement policy for a protection system is described in which the inspection process is subject to error, and false positives (false alarms) and false negatives are possible. We develop two models: one in which a false positive implies renewal of the protection system; the other not. These models are motivated by inspection of a protection system on the production line of a beverage manufacturer. False negatives reduce the efficiency of inspection. Another notion of imperfect maintenance is also modelled: that of poor installation of a component at replacement. These different aspects of maintenance quality interact: false alarms can, in a worst case scenario, lead to the systematic and unnecessary replacement of good components by poor components, thus reducing the availability of the system. The models also allow situations in which maintenance quality differs between alternative maintainers to be investigated.     

A deteriorating cold standby repairable system with priority in use

In this paper, a cold standby repairable system consisting of two dissimilar components and one repairman is studied. In this system, it is assumed that the working time distributions and the repair time distributions of the two components are both exponential and component 1 is given priority in use. After repair, component 2 is “as good as new” while component 1 follows a geometric process repair. Under these assumptions, using the geometric process and a supplementary variable technique, some important reliability indices such as the system availability, reliability, mean time to first failure (MTTFF), rate of occurrence of failure (ROCOF) and the idle probability of the repairman are derived. A numerical example for the system reliability R(t) is given. And it is considered that a repair-replacement policy based on the working age T of component 1 under which the system is replaced when the working age of component 1 reaches T. Our problem is to determine an optimal policy T^∗ such that the long-run average cost per unit time of the system is minimized. The explicit expression for the long-run average cost per unit time of the system is evaluated, and the corresponding optimal replacement policy T^∗ can be found analytically or numerically. Another numerical example for replacement model is also given.     

自保护相依多部件系统的预防维修建模及策略优化

自保护技术作为自愈技术的一种,能够使系统在环境或工况条件变化的干扰下以较高可靠性运行。本文构建了一个新的具有相依主要部件和辅助部件的系统可靠性模型,其中主要部件的退化速率与工作中的辅助部件的数量有关。此外,基于定期检测和预防维修策略,本文利用半再生过程技术求解了系统的长期运行平均成本,并以长期运行平均成本最小化为目标给出了系统的最优预防维修策略。最后,以镗刀系统为例,利用所提方法给出了预防更换阈值和检测周期的最优值,以期望为实际维修行为决策提供理论参考。     

Condition-based maintenance optimization considering improving prediction accuracy

Condition-based maintenance (CBM) aims to reduce maintenance cost and improve equipment reliability by effectively utilizing condition monitoring and prediction information. It is observed that the prediction accuracy often improves with the increase of the age of the component. In this research, we develop a method to quantify the remaining life prediction uncertainty considering the prediction accuracy improvement, and an effective CBM optimization approach to optimize the maintenance schedule. Any type of prognostics methods can be used, including data-driven methods, model-based methods and integrated methods, as long as the prediction method can produce the predicted failure time distribution at any given inspection point. Furthermore, we develop a numerical method to accurately and efficiently evaluate the cost of the CBM policy. The proposed approach is demonstrated using vibration monitoring data collected from pump bearings in the field as well as simulated degradation data. The proposed policy is compared with two benchmark maintenance policies and is found to be more effective.     

基于修理设备的冷贮备可修系统的维修策略

本文研究了两同型部件,一个修理设备组成的冷贮备可修系统.在故障部件不能"修复如新"的条件下,分别以系统中部件1故障次数N,工作时间T和(N,T)为维修策略,利用更新过程和几何过程,求出修理设备经长期运行单位时间内平均停工时间表达式.并在部件寿命的分布函数和修理时间的分布函数已知的情况下,以部件1故障次数N为策略证明存在最优N*使修理设备经长期运行单位时间内平均停工时间最长.最后,通过数值例子验证最优策略的存在性.     

有两种故障状态的两部件串联系统的预防维修策略

本文研究的是由两个部件串联组成且有两种故障状态的系统的预防维修策略, 当系统的工作时间达到T时进行预防维修, 预防维修使部件恢复到上一次故障维修后的状态。每个部件发生故障都有两种状态, 可维修和不可维修。当部件的故障为可维修故障时, 修理工对其进行故障维修, 且每次故障维修后的工作时间形成随机递减的几何过程, 每次故障后的维修时间形成随机递增的几何过程。当部件发生N次可维修故障或一次不可维修故障时进行更换。以部件进行预防维修的间隔和更换前的可维修故障次数N组成的二维策略(T, N) 为策略, 利用更新过程和几何过程理论求出了系统经长期运行单位时间内期望费用的表达式, 并给出了具体例子和数值分析。     

The average optimality of a repair-limit replacement policy

We consider a minimal-repair and replacement problem of a reliability system whose state at a failure is described by a pair of two attributes, i.e., the total number of its past failures and the current failure level. It is assumed that the system is bothered by more frequent and more costly failures as time passes. Our problem is to find and/or characterize a minimal-repair and replacement policy of minimizing the long-run average expected maintenance cost per unit time over the infinite time horizon. Formulating the problem as a semi-Markov decision process, we show that a repairlimit replacement policy is average optimal. That is, for each total number of past system failures, there exists a threshold, called a repair limit, such that it is optimal to repair minimally if the current failure level is lower than the repair limit, and to replace otherwise. Furthermore, the repair limit is decreasing in the total number of past system failures.     

考虑不完全检测的冲击模型最优维修策略

针对制造系统中设备检测不完全的情形,研究基于不完全检测的冲击模型的周期检测、维修联合策略．通过定期检测获知系统的劣化状态以进行必要的预防性维修．在假设系统是退化的且有k个不同故障状态的条件下,以最小化系统运行成本为目标,以检测周期T、系统更换前故障次数Ⅳ为联合决策变量,利用更新过程理论建立了系统平均费用率C（T,N）的数学模型,并且给出最优联合策略的数值算法．最后借助数值例子演示了该模型,分析了检测水平对系统运行成本的影响．     

Optimal maintenance scheduling for a complex manufacturing system subject to deterioration

We address the problem of determining inspection strategy and replacement policy for a deteriorating complex multi-component manufacturing system whose state is partially observable. We develop inspection and replacement scheduling models and other simple maintenance scheduling models via employing an imperfect repair model coupled with a damage process induced by operational conditions. The system state in performance of the imperfectly repaired system is modelled using a proportional intensity model incorporating a damage process and a virtual age process caused by repair. The system is monitored at periodic times and maintenance actions are carried out in response to the observed system state. Decisions to perform imperfect repair and replacement are based on the system state and crossing of a replacement threshold. The model proposed here aims at joint determination of a cost-optimal inspection and replacement policy along with an optimal level of maintenance which result in low maintenance cost and high operational performance and reliability of the system. To demonstrate the use of the model in practical applications a numerical example is provided. Solutions to optimal system parameters are obtained and the response of the model to these parameters is examined. Finally some features of the model are demonstrated. The approach presented provides a framework so that different scenario can be explored.     

考虑不完美检测的两阶段点检与备件订购策略联合优化

针对设备维修与备件管理相互影响与制约的问题, 在基于延迟时间理论的基础上, 提出了两阶段点检与备件订购策略联合优化。点检是不完美的, 当点检识别设备的缺陷状态时, 进行预防更新; 设备故障时, 进行故障更新。结合设备更新时备件的状态, 采用更新报酬理论建立了以第一阶段点检时间、第二阶段点检周期和备件订购时间为决策变量, 以最小化单位时间期望成本为目标的模型。最后, 通过人工蜂群算法对模型求解, 并在数值分析中将两阶段点检策略与定期点检策略进行比较, 结果表明:两阶段点检策略始终优于定期点检策略, 验证了所建模型的有效性。     

考虑非周期检测的视情维修与备件订购联合策略优化

针对单部件系统/关键部件提出视情维修与备件订购联合策略,其中系统退化服从两阶段延迟时间过程且采用非周期检测策略,退化初期以检测间隔T₁检查系统状态,而在第一次识别缺陷状态时,缩短检测周期为T₂、订购备件且进行不完美维修;若系统在随后的退化中被识别处于缺陷状态,执行不完美维修直至超过阈值次数N_max并采取预防性更换,但若在检测周期内发生故障则进行更换。根据系统状态和备件状态分析各种可能更新事件及相应的联合决策,利用更新报酬理论构建最小化单位时间内期望成本的目标函数,优化T₁,T₂, N_max。与对比模型策略相比,算例结果表明所提出的联合策略能有效降低单位时间内的期望成本。     

A preventive maintenance policy with sequential checking procedure for a Markov deteriorating system

We consider a repairable system subject to a continuous-time Markovian deterioration while running, that leads to failure. The deterioration degree is measured with a finite discrete scale; repairs follow general distributions; failures are instantaneously detected. This system is submitted to a preventive maintenance policy, with a sequential checking procedure: the up-states are divided into two parts, the “good” up-states and the “degraded” up-states. Instantaneous (and perfect) inspections are then performed on the running system: when it is found in a degraded up-state, it is stopped to be maintained (for a random duration that depends on the degradation degree of the system); when it is found in a good up-state, it is left as it is. The next inspection epoch is then chosen randomly and depends on the degradation degree of the system by time of inspection. We compute the long-run availability of the maintained system and give sufficient conditions for the preventive maintenance policy to improve the long-run availability. We study the optimization of the long-run availability with respect to the distributions of the inter-inspection intervals: we show that under specific assumptions (often checked), optimal distributions are non-random. Numerical examples are studied.