镍纳米粒子修饰碳糊电极直接电催化鸟嘌呤的研究

将镍纳米粒子与石蜡、石墨按照一定比例混合制备镍纳米粒子修饰碳糊电极,采用循环伏安法(CV)对修饰碳糊电极进行电化学表征,在0.1 mol/L B-R缓冲溶液(pH4.5)中研究了鸟嘌呤在该修饰电极上的电化学行为。结果表明,与裸碳糊电极相比,以掺杂法制备的镍纳米粒子修饰电极能够明显降低鸟嘌呤的过电位,增大其氧化电流,很好地催化氧化鸟嘌呤。在优化的实验条件下,鸟嘌呤在该修饰电极上的氧化峰电流与其浓度在1.0×10-5~5.0×10-4mol/L范围内呈良好的线性关系,检出限(3σ)为7.5×10-6mol/L。     

基于镍基纳米材料电化学传感器的α-糖苷酶抑制剂筛选方法研究

采用多周期的电化学循环伏安(CV)法在泡沫镍(NF)上一步制备了镍基纳米材料修饰电极(Ni(OH)₂/NF)用于α-糖苷酶抑制剂的酶抑制活性评价,并基于此建立了一种简便的中药糖苷酶抑制剂筛选方法。采用X射线粉末衍射仪和扫描电镜表征修饰电极表面的结构和形貌;采用CV法和计时电流法测试电极的电化学性能。结果表明,Ni(OH)₂/NF传感器检测复杂酶体系中的葡萄糖具有良好的电化学响应,灵敏度高达3222μA·mmol/(L·cm²),线性范围为3.0～6000μmol/L,检出限低至0.9μmol/L (S/N=3)。采用临床降糖药物阿卡波糖验证了此传感器用于α-糖苷酶活性检测的可行性;并将传感器应用于莲须提取液的酶抑制效果评价,发现莲须具有一定的α-糖苷酶抑制活性,其半数抑制浓度(IC₅₀)为3.31 g/L。本研究结果表明,研制的传感器适用于α-糖苷酶抑制活性分析,为天然降糖药物筛选提供了一种新方法。     

纳米金修饰的碳纤维超微电极在高浓度抗坏血酸体系中选择性测定多巴胺

将柠檬酸三钠与硼氢化钠还原氯金酸制备纳米金颗粒,采用一步恒电位沉积的方法在碳纤维超微电极上沉积纳米金颗粒,并对电极进行电化学表征。分别对100μmol/L DA、1mmol/L AA在该电极上修饰前后的电化学行为进行了研究,结果表明在浓度为1 mmol/L抗坏血酸共存下,DA的浓度(0. 1～10μmol/L)与氧化峰电流成正比,线性回归方程为Ip(μA)=200 c(μmol/L)+2×10~(-4),相关系数R~2=0. 9979,线性范围0. 1～10μmol/L,检出限为1. 28×10~(-2)μmol/L (S/N=3)。方法可用于较高浓度抗坏血酸共存下对多巴胺的选择性测定。     

氧化镍/碳纤维电化学传感器制备及用于恩诺沙星的检测

建立了基于镍修饰的碳纤维电化学传感器快速检测恩诺沙星的方法。将碳纤维（CNF）滴涂于玻碳电极（GCE）表面,采用循环伏安法（CV）将NiO纳米粒子沉积于CNF表面,制得NiO/CNF/GCE修饰电极,采用扫描电镜（SEM）和能谱仪（EDS）对修饰材料的形貌和元素进行表征,并将不同修饰电极放在磷酸缓冲液（PBS）中进行CV表征。对传感器制备和测定过程中的影响因素、CNF的滴涂量、缓冲液pH和Ni（NO₃）₂的电聚合圈数进行优化。采用差分脉冲伏安法（DPV）考察该电化学传感器对恩诺沙星的电化学行为。结果表明,制备的NiO/CNF/GCE电化学传感器在CNF滴涂用量为8μL,基质PBS溶液pH 6.0,Ni（NO₃）₂电聚合圈数为12圈时电极灵敏度最高,对恩诺沙星有较高的电化学响应,在0.5～80μmol/L浓度范围内与电流的变化值呈良好的线性关系,线性方程为I_p=0.0729c+0.4015（R²=0.995）,方法检出限为0.17μmol/L,实际样品平均回...     

交联镍纳米片修饰电极用于无酶葡萄糖传感器

以滴涂法在玻碳电极表面修饰一层阳离子交换聚合物Nafion膜,通过离子交换将Ni2+固定于电极表面,进一步电化学沉积得到相互交联的Ni纳米片。Ni纳米片修饰电极能催化葡萄糖的电化学氧化,可用于无酶葡萄糖传感器的构建。在0.60 V恒电位条件下,Ni纳米片修饰电极的氧化峰电流随葡萄糖浓度的增大而增大,其线性响应浓度范围为0.02~3.85 mmol/L。传感器的检测灵敏度为150.6μA(mmol/L)-1·cm-2,检出限为5μmol/L,响应时间为5 s。传感器应用于葡萄糖注射液的检测,加标回收率为90.0%。     

血红蛋白在TiO2-石墨烯/离子液体/壳聚糖纳米复合膜修饰电极上的直接电化学

基于TiO2-石墨烯、离子液体和壳聚糖复合膜修饰玻碳电极制备了一种新型的电化学传感器。用循环伏安法研究了血红蛋白在该修饰电极上的直接电化学行为。结果表明,该纳米复合膜能有效地促进血红蛋白在电极上的直接电子转移,保持其生物催化活性。该传感器对H2O2具有良好的催化性能。H2O2的电流响应信号与其浓度在20～860μmol/L范围内呈良好的线性关系,检出限为0.1μmol/L(S/N=3)。传感器具有良好的稳定性和重现性。     

纳米金/三聚氰胺修饰电极检测亚硝酸盐

采用电聚合方法制备三聚氰胺(MA)膜修饰玻碳电极(GCE),然后采用原位恒电位沉积法制备金纳米颗粒(Au),并将其修饰于膜电极表面,制得纳米金/三聚氰胺修饰玻碳电极(Au/MA/GCE)。用扫描电子显微镜(SEM)对修饰电极进行表面形貌和元素成分分析。用循环伏安法研究亚硝酸根(NO2-)在该修饰电极上的电化学行为发现,NO2-在0.85 V出现一灵敏的氧化峰。在优化的实验条件下,NO2-在1.0×10-5～1.0×10-3mol/L浓度范围内与其氧化峰电流成线性关系,检测下限为8.9×10-7mol/L。将修饰电极用于实际样品中NO2-的检测,效果良好。     

三磷酸腺苷在TiO2掺杂碳纳米纤维修饰电极上的电化学行为

采用循环伏安法和示差脉冲伏安法研究了三磷酸腺苷(ATP)在TiO2掺杂碳纳米纤维(TiO2@CNF)修饰的碳离子液体电极表面(TiO2@CNF/CILE)的电化学行为。结果表明,ATP在TiO2@CNF/CILE表面有一个明显的氧化峰,在pH 3.0的Britton-Robinson(BR)缓冲溶液中修饰电极对ATP具有显著的电催化作用。纤维状的TiO2@CNF能够有效促进电子转移,增加电化学信号。当ATP浓度分别在4.0×10^-9~2.0×10^-6mol/L和2.0×10^-6~1.0×10^-4mol/L范围时,氧化峰电流与ATP浓度呈良好的线性关系,检测限为1.4 nmol/L。修饰电极可用于注射液中ATP的测定。     

电化学方法制备石墨烯-铁氰化镍复合物及对抗坏血酸的电催化氧化研究

采用电化学还原方法制备了铁氰化镍-石墨烯复合薄膜电极,扫描电子显微镜(SEM)表征电还原石墨烯和铁氰化镍-石墨烯复合材料的表面形貌。采用循环伏安和计时电流技术研究了该修饰电极对抗坏血酸(AA)的电催化氧化性能,据此建立了一种测定AA的电化学分析新方法。由于石墨烯和铁氰化镍纳米颗粒之间的协同效应,使得该复合修饰电极对抗坏血酸具有优异的电催化活性。在0.1 mol/L pH 7.00的PBS溶液中,抗坏血酸的催化氧化电流与其浓度在1.0×10-4~7.0×10-4mol/L范围内呈良好的线性关系,检出限为3.1×10-5mol/L(S/N)。     

纳米Cu_2O/氮掺杂石墨烯复合修饰电极对多巴胺的电化学分析研究

本文通过化学还原法制备纳米Cu_2O/氮掺杂石墨烯(NG)复合材料,用于构建一种新型的多巴胺(DA)电化学传感器。采用X射线衍射法和扫描电镜对纳米Cu_2O/氮掺杂石墨烯复合材料进行表征。在pH为7.0的磷酸盐缓冲液中,采用循环伏安法和计时电流法分别研究了DA在纳米Cu_2O/氮掺杂石墨烯复合修饰电极上的电化学行为。结果表明,该修饰电极对DA表现出显著的电催化活性,且DA在修饰电极上的反应受吸附控制。在最佳实验条件下,催化电流与DA的浓度在0.5~700μmol/L之间呈线性关系(r=0.9943),检测限达0.17μmol/L。该修饰电极的选择性高、重复性和再现性好。方法用于实际样品中DA的检测,获得结果较好。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.