磷光铱配合物的纯度对其电致发光性能的影响

采用不同的真空热梯度升华条件,获得了不同纯度的乙酰丙酮酸二(2-苯基吡啶)铱Ir(ppy)₂(acac)。以不同纯度Ir(ppy)₂(acac)为客体材料,制备了结构为ITO:MoO₃/CBP/CBP:Ir(ppy)₂(acac)/TPBi/LiF:Al的有机发光二极管(OLEDs),其中CBP和TPBi分别是4,4'-二(9-咔唑)联苯和1,3,5-三(1-苯基-1H-苯并咪唑-2-基)苯。评价了不同纯度磷光铱配合物制备的器件的电致发光性能,探索了磷光铱配合物纯度对器件性能的影响。结果表明:Ir(ppy)₂(acac)升华后可以提高器件的稳定性,纯度高的材料可以在较低的掺杂浓度下获得较高的发光效率。     

一种基于三氟甲基取代的2-苯并[b]噻吩基吡啶配体的红色电致磷光材料及器件

研究了一种新型红色磷光材料及其在有机电致磷光器件(OLEDs)中应用.在经典红色磷光材料btp₂Ir(acac)的配体2-苯并噻吩吡啶的吡啶环的5位引入吸电子基团CF₃,将辅助配体换为2-吡啶甲酸,成功研制出了双(2-(2′-苯并[b]噻吩基)吡啶)吡啶甲酸合铱配合物[(btfmp)₂Ir(pic)].这种结构可以改变了原配合物的电子云分布,三氟甲基的引入将导致原分子的LUMO能下降,减小了HOMO与LUMO的能隙,引起发光峰位的红移,但2-吡啶甲酸又可引起发光蓝移,最终得到了最大峰位为637nm的饱和红光新的铱(Ⅲ)配合物,为通过简单配体修饰设计和制备新的有机磷光材料提供了一种简洁途径.     

具有减少自猝灭效果的铱配合物掺杂型红色聚合物磷光器件

将双(2-(2'-苯并 噻吩基)-5-三氟甲基吡啶)乙酰丙酮合铱配合物 及电子传输材料PBD掺杂到基质材料PVK中,利用旋涂的方法制备聚合物磷光器件。铱配合物的掺杂质量分数分别为8%、10%、15%及18%,当掺杂质量分数为15%时获得了最大外量子效率4.5%,而同样结构的经典的红光材料(btp)₂Ir(acac)的掺杂质量分数为4%时最大外量子效率为3.3%。可以看出,含三氟甲基的新铱配合物制备的聚合物器件具有明显的减少浓度猝灭效果,这可能由于三氟甲基基团改变了分子堆积状态,减少了分子间相互作用的结果。该聚合物器件最大发射峰位648 nm,色坐标为(0.71,0.29), 没有PVK的蓝光发射峰。     

铱金属配合物磷光材料掺杂聚合物体系的电致发光特性

通过对一种新型贵金属铱的配合物磷光材料(pbi)₂Ir(acac)与咔唑共聚物进行物理掺杂, 制备了结构为indium-tin oxide(ITO)/poly(N-vinylcarbazole)(PVK): (pbi)₂Ir(acac)(x)/2,9-dimethyl-4,7-diphenyl-1,10-phenan throline(BCP)(20nm)/8-Hydroxyquinoline aluminum(Alq₃)(10nm)/Mg:Ag的聚合物电致磷光器件,研究了磷光聚合物掺杂体系在低掺杂浓度时(0.1%和0.5%(质量百分数,全文同))的光致发光(PL)和电致发光(EL)特性. 结果表明, 该掺杂体系的PL光谱和EL光谱中均同时存在主体材料PVK与磷光客体(pbi)₂Ir(acac)的发光光谱, 但主客体的发射强度不同,推测该掺杂体系在电致发光条件下, 同时存在主体材料到客体的不完全的能量传递和载流子直接俘获过程. 磷光掺杂浓度为0.1%的器件在19V电压下实现了白光发射, 色坐标为(0.32, 0.38), 掺杂浓度为0.5%的器件在20.6V电压下的最大发光亮度为11827 cd·m^-2, 而在13.4V电压下的最大流明效率为4.13 cd·A^-1. 关键词： 有机电致发光器件 铱配合物磷光 聚合物掺杂     

一种基于荧光材料的聚合物白光发光二极管

制备了一种基于荧光聚合物共混的单发光层聚合物白光发光二极管.器件结构为铟锡氧化物/苯磺酸掺杂聚乙烯基二氧噻吩/发光层/ 1,3,5-三(N-苯基-2-苯并咪唑-2)苯41/Ba/Al,蓝光材料芴-氟化喹喔啉共聚物(PF-BPFQ5)、绿光材料苯基取代的聚对苯乙炔(P-PPV)和红光材料聚(2-甲氧基-5-(2′-乙基己氧基)-1,4-对苯乙炔)(MEH-PPV)共混为发光层.当PF-BPFQ5,P-PPV,MEH-PPV的质量比例为100∶06∶06时,获得标准的白光,色坐标为（033 关键词： 聚合物发光二极管 白光 共混     

有机磷光材料的固态阴极射线发光研究

采用有机磷光材料三-(2-苯基吡啶)-铱(Ir(PPY)₃)与无机材料SiO₂复合制成夹层结构器件,用交流电压驱动获得了Ir(PPY)₃主峰位于517nm的发光和主峰位于435nm的蓝色发光.通过分析器件的光谱特性,发现这两个发光峰都是源于SiO₂中加速电子直接碰撞激发有机层引起的固态阴极射线发光.继实现多种有机聚合物材料和有机小分子材料八羟基喹啉铝(Alq₃)的固体阴极射线发光之后,又证实了有机 关键词： 夹层结构器件 有机磷光材料 固态阴极射线发光     

基于咪唑并吡啶类配体新型磷光材料的合成与表征

设计开发了系列新型咪唑并吡啶类铱(Ⅲ)配合物(BIPy)₂Ir(acac)、(PIPy)₂Ir(acac)、 (4'-MPIPy)₂-Ir(acac)。在化合物Ⅲ中,当R=Ph时得到(BIPy)₂Ir(acac)材料,其中BIPy和acac分别表示2-(4-联苯基)咪唑并吡啶和乙酰丙酮。将(BIPy)₂Ir(acac)掺杂在N,N'-二咔唑-(1,1'-联苯)-4,4'-二胺(CBP)中制备了高效OLEDs器件,器件的最大电流效率为26.7 cd/A,最大亮度为18 000 cd/cm²,色坐标为(0.32,0.60),是首次报道的新型苯基咪唑并吡啶类铱(Ⅲ)配合物绿色磷光材料。     

含载流子基团的红色磷光铱配合物的电致发光特性

将含载流子基团的铱配合物Ir-1或Ir-2掺杂到聚芴(PFO)和2-(4-二苯基)-5-(4-叔丁苯基)-1,3,4-噁二唑(PBD)中作为发光层,采用旋涂法制备电致发光器件。通过改变发光层中铱配合物的掺杂浓度,研究了不同掺杂比例对器件性能的影响。结果表明,当铱配合物的掺杂质量分数为2%时,器件的电致发光性能最好。和含苯基的Ir-1比较发现,以含空穴传输基团三苯胺的Ir-2为客体材料的器件性能更好,能够更有效地避免T-T猝灭,器件的最大流明效率为2.78 cd·A-1,最大亮度为5 718 cd·m-2。     

含铱配合物的聚对苯类电磷光聚合物

通过Suzuki聚合法合成了以聚对苯为主链的含铱配合物的电磷光共轭聚合物。部分苯环单元被β-二酮结尾的烷氧基链取代,进而与2-苯基吡啶配位形成悬垂的铱配合物侧链。宽带隙的聚对苯主链使主体与客体的能级匹配,从而有利于能量的转移。铱配合物通过长β-二酮结尾的烷氧基链悬挂在聚对苯的侧链上提高了聚合物的溶解性,有利于器件的制作。另外,由于连在氧原子上的β-二酮具有较大的旋转自由度,增大了β-二酮的反应活性有利于配位反应的进行。聚合物的EL光谱只显示客体铱配合物的发射,主体的发射已被完全猝灭。这表明聚合物主体和铱配合物客体之间发生了有效的能量转移。PPPIrPPy2聚合物发光器件的EL光谱发光波长为525nm,最大外量子效率为2.6%。     

基于量子点和MEH-PPV的白光发光二极管的研究

利用无机纳米材料与有机聚合物材料相结合的方法制备白光发光二极管器件, 研究了蓝光量子点QDs(B)掺杂聚[2-甲氧基-5-(2-乙基己氧基-1, 4-苯撑乙烯撑](MEH-PPV) 复合体系的发光特性及量子点QDs(B) 掺杂浓度(质量分数)不同对器件发光特性的影响. 制备了ITO/PEDOT:PSS/MEH-PPV:QDs(B)/LiF/Al 结构的电致发光器件, 测试了器件的电致发光光谱和电学、光学特性. 当QDs掺杂浓度为40%, 驱动电压为8 V时器件能得到较为理想的白光发射. 同时, 对比研究了非掺杂体系的发光特性, 制备了结构为ITO/PEDOT:PSS/MEH-PPV/QDs(B)/LiF/Al的器件, 掺杂体系相较于非掺杂体系, 器件的最大亮度增大, 启亮电压降低, 并分析了掺杂体系器件性能改善的原因.     

Bright hybrid white light-emitting quantum dot device with direct charge injection into quantum dot

A bright white quantum dot light-emitting device(white-QLED) with 4-[4-(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl]-2- [3-(tri-phenylen-2-yl)phen-3-yl]quinazoline deposited on a thin film of mixed green/red-QDs as a bilayer emitter is fabricated. The optimized white-QLED exhibits a turn-on voltage of 3.2 V and a maximum brightness of 3660 cd/m~2@8 V with the Commission Internationale de l'Eclairage(CIE) chromaticity in the region of white light. The ultra-thin layer of QDs is proved to be critical for the white light generation in the devices. Excitation mechanism in the white-QLEDs is investigated by the detailed analyses of electroluminescence(EL) spectral and the fluorescence lifetime of QDs. The results show that charge injection is a dominant mechanism of excitation in the white-QLED.     

White organic light-emitting device with\ both phosphorescent and fluorescent emissive layers

This paper reports the fabrication of novel white organic light-emitting device（WOLED） by using a high efficiency blue fluorescent dye N-（4-（（E）-2-（6-（（E）-4-（diphenylamino）styryl）naphthalen-2-yl）vinyl）phenyl）oN- phenylbenzenamine （N-BDAVBi） and a red phosphoresecent dye bis （1-（phenyl） isoquinoline） iridium （III） acetylanetonate （Ir（piq）2（acac））. The configuration of the device was ITO/PVK：TPD/CBP： N-BDAVBi /CBP/ BALq： Ir（piq）2（acac）/BCP/Alq3/LiF：AL. By adjusting the proportion of the dopants （N-BDAVBi, Ir（piq）2（acac）） in the light-emitting layer, white light with Commission Internationale de l＇Eclairage （CIE） coordinates of （0.35, 0.35） and a maximum luminance of 25350cd/m2 were obtained external quantum and current efficiency of 6.78% and between the two light-emitting layers and using BCP at an applied voltage of 22V. The WOLED exhibits maximum 12cd/A respectively. By placing an undoped spacer CBP layer as hole blocking layer, the colour stabilization slightly changed when the driving voltage increased from 6 to 22 V.     

Investigation of bipolar matrix based mixed host in highly efficient green delayed fluorescence organic light-emitting diodes

The mixed cohosts of electron transport host (E-host): 4,40-bis(carbazol-9-yl)biphenyl (CBP) have been comparatively investigated for an efficient green fluorescent organic light emitting diode (OLED) doped with a thermally activated delayed fluorescence (TADF) emitter (4s,6s)-2,4,5,6-tetra(9H-carbazol-9-yl)isophthalonitrile (4CzIPN). The E-host:CBP systems significantly enhance the electroluminescent (EL) properties. After doping E-host, the lifetime of the emissive layer decreases and the surface becomes smoother, together with the impedance decreases for one magnitude and the hole-injection depresses. The charge balance and improved interface both contribute to the EL performance enhancement. Here we develop a universal mixed host system suitable to most of emitters.     

含噻二唑聚芴类白光聚合物的合成与发光性能研究

通过Suzuki偶联反应将2,7-二溴-9,9-二辛基芴（Br-DOF）、2,7-二硼酸-9,9-二辛基芴（B-DOF）和4-（8-（2,7-二溴-9-辛基芴）辛氧基）-N-4-（7-（4-（二苯胺基）苯基）苯并噻二唑）苯基-二苯胺（Br-TAF）共聚,合成了白光聚合物PDOF-TAF。以PDOF-TAF为发光层,溶液旋涂制备了非掺杂型单层白光有机电致发光二极管,色坐标为（0.23,0.18）。通过插入电子传输层TPBI和空穴传输层PVK得到的白光器件发射光谱覆盖了410~700 nm区域,色坐标从（0.23,0.18）调整到（0.24,0.32）,亮度达到2 020 cd/m²,电流效率达到1.4 cd/A。实验结果表明,PDOF-TAF是一种很好的白光聚合物发光材料,在WOLED中将有很好的应用前景。     

High color rendering index white organic light-emitting diode using levofloxacin as blue emitter

Levofloxacin(LOFX), which is well-known as an antibiotic medicament, was shown to be useful as a 452-nm blue emitter for white organic light-emitting diodes(OLEDs). In this paper, the fabricated white OLED contains a 452-nm blue emitting layer(thickness of 30 nm) with 1 wt% LOFX doped in CBP(4,4'-bis(carbazol-9-yl)biphenyl) host and a584-nm orange emitting layer(thickness of 10 nm) with 0.8 wt% DCJTB(4-(dicyanomethylene)-2-tert-butyl-6-(1,1,7,7-tetramethyljulolidin-4-yl-vinyl)-4H-pyran) doped in CBP, which are separated by a 20-nm-thick buffer layer of TPBi(2,2',2"-(benzene-1,3,5-triyl)-tri(1-phenyl-1H-benzimidazole). A high color rendering index(CRI) of 84.5 and CIE chromaticity coordinates of(0.33, 0.32), which is close to ideal white emission CIE(0.333, 0.333), are obtained at a bias voltage of 14 V. Taking into account that LOFX is less expensive and the synthesis and purification technologies of LOFX are mature, these results indicate that blue fluorescence emitting LOFX is useful for applications to white OLEDs although the maximum current efficiency and luminance are not high. The present paper is expected to become a milestone to using medical drug materials for OLEDs.     

一种基于蓝色荧光与磷光敏化技术的高显色指数白光有机电致发光器件的制备

通过采用4,4'-bis(9-ethyl-3-carbazovinylene)-1,1'-biphenyl (BCzVBi)为蓝色荧光发光单元,绿色磷光材料fac tris(2-phenylpyridine) iridium 敏化红色荧光材料4-(dicyanomethylene)-2-tert-butyl-6-(1,1,7,7-tetramethyljulolidin-4-yl-vinyl)-4H-pyran (DCJTB)为混合黄色发光单元,制备了一组白光有机电致发光器件。通过对染料掺杂浓度的优化,以及引入适当厚度的4,4-N,N-dicarbazole-biphenyl (CBP)作为中间层,获得了高效率、高显色指数的白光有机电致发光器件。器件在100 cd/m²亮度下的最高显色指数达到了90,此时的色坐标为(0.32,0.32), 非常接近白光等能点。该组器件的最大电流效率达到了11.00 cd/A,相应器件的最大亮度为13 330 cd/m²。     

三元铱配合物磷光体系的白光有机电致发光器件光谱特性研究

将黄光磷光材料bis[2-(4-tertbutylphenyl)benzothiazolato-N,C2’]iridium (acetylacetonate) [(t-bt)₂Ir(acac)]超薄层作为黄光发光层,两个蓝光磷光染料iridium(Ⅲ) bis(4’,6’-difluorophenylpyridinato)tetrakis(1-pyrazolyl)borate (FIr6)和bis[(4,6-difluorophenyl)-pyridinato-N,C2’](picolinate) iridium (Ⅲ) (FIrpic)掺杂层作为蓝光发光层,制备了三元发光层的白光有机电致发光器件。该器件具有三元磷光染料分子协同发光特性,并且利用合适厚度的隔层,将三线态激子束缚在各自激子复合区域内,获得了稳定电致发光光谱,CIE色坐标为(0.29±0.01, 0.34±0.01),处于理想的白光区域。通过器件电学特性的测试,验证了磷光染料在三元发光层器件中电致发光作用的机理,同时结果表明,三元发光层器件由于稳定的激子复合区域而有效减弱了器件效率滚降现象。     

微腔有机电致发光白光器件设计及制作

用一种宽谱带材料Alq₃作为发光层,设计并制作白色有机微腔电致发光器件。器件结构:Glass/DBR/ITO(194 nm)/NPB(93 nm) /Alq₃(49 nm)/MgAg(150 nm),得到了位于蓝(488 nm)和红(612 nm)光区域的两个腔发射模式,并通过颜色匹配获得了白光。器件的最大电致发光亮度16 435 cd/m²,最大效率11.1 cd/A,典型亮度值100 cd/m²时的发光效率、电压、电流密度分别是9 cd/A,6 V和1.2 mA/cm²,CIE 色坐标为(0.32, 0.34)。在不同的驱动电压下,器件的发光颜色稳定,说明了微腔是一种制作白光OLED的有效结构。     

基于1,3,5-tri(9H-carbazol-9-yl)benzene 主体材料的高效蓝色电致磷光器件

以1,3,5-tri(9H-ctarbazol-9-yl)benzene(TCzP)为主体材料,制备了FIrpic掺杂的高效有机电致蓝光双发光层器件,最大亮度为11957 cd/m2;最大电流效率为18.8 cd/A;色坐标为(0.17,0.37);光谱峰值位于472nm,在496 nm处有一肩峰;即使在1 000cd...     

Study of different roles phosphorescent material played in different positions of organic light emitting diodes

Phosphorescent materials are crucial to improve the luminescence and efficiency of organic light emitting diodes (OLED), because its internal quantum efficiency can reach 100%. So the studying of optical and electrical properties of phosphorescent materials is propitious for the further development of phosphorescent OLED. Phosphorescent materials were generally doped into different host materials as emitting components, not only played an important role in emitting light but also had a profound influence on carrier transport properties. We studied the optical and electrical properties of the blue 4,4′-bis(2,2-diphenylvinyl)-1,1′-biphenyl (DPVBi)-based devices, adding a common yellow phosphorescent material bis[2-(4-tert-butylphenyl)benzothiazolato-N,C2′] iridium(acetylacetonate) [(t-bt)₂Ir(acac)] in different positions. The results showed (t-bt)₂Ir(acac) has remarkable hole-trapping ability. Especially the ultrathin structure device, compared to the device without (t-bt)₂Ir(acac), had increased the luminance by about 60%, and the efficiency by about 97%. Then introduced thin 4,4′-bis(carbazol-9-yl)biphenyl (CBP) host layer between DPVBi and (t-bt)₂Ir(acac), and got devices with stable white color.