交联聚苯乙烯强—弱碱树脂的合成及脱色性能研究

交联聚苯乙烯氯甲基化后，分别与甲胺（或二甲胺）、三甲胺（或α－甲基吡啶、二甲基乙醇胺）混合胺化试剂进行亲核取代反应，合成了一系列同时带有强－弱碱功能基的交联聚苯乙烯树，并表征了这些树脂的结构，测定了树脂对甜菊甙的脱色性能，结果表明，这些树酯功能基碱性适中，脱色容量较高，甜菊甙损失较少，再生效率高。     

交联聚苯乙烯吸附树脂的修饰及其对天然皂甙的吸附性能

交联聚苯乙烯氯甲基化后,将氯转化为羟基、氨基、甲氧基、苯氧基、4-羟基苯氧基和4-乙酰苯氧基,合成了不同极性的吸附树脂Ⅰ—Ⅵ。同时由交联聚苯乙烯经Friedel-Crafts酰化反应在其苯环上引入乙酰基,制备了树指Ⅶ。用物理技术和化学方法表征树脂Ⅰ—Ⅶ的结构,然后测定了它们对天然皂甙如甜菊甙和绞股蓝皂甙的吸附量。结果说明,这些树脂亲水性较好,均能吸附天然皂甙,但只有中极性的酮基树脂Ⅵ和Ⅶ的吸附量较大。     

阴离子交换树脂的合成及其脱色性能

为了改进提取甜菊甙(糖)所用的阴离子交换树脂的脱色能力和抗污染能力,作者选用合适的致孔剂进行苯乙烯、二乙烯苯和极性单体的多元悬浮共聚,然后进行氯甲基化和胺化,合成了多种阴离子交换树脂。与D280树脂相对照进行树脂性能测试,筛选出了对甜菊甙脱色容量较大和再生效果较好的E—04树脂。     

吸附树脂AB－8对甜菊甙的吸附性能及在其提取纯化中的应用

考察了大孔吸附树脂ＡＢ－８对甜菊甙的吸附性能，和溶液的ｐＨ值、洗脱剂的种类及流速对树脂吸附，脱附性能的影响；结果表明，ＡＢ－８树脂对甜菊甙吸附量高，循环使用性能好且易于洗脱。     

含酮基吸附剂对莱鲍迪甙A的吸附选择性研究

合成了一系列具有不同骨架结构的中极性含酮基大孔吸附树脂，研究了树脂极性与骨架结构的关系，讨论了树脂对甜菊糖中两种主要糖甙甜菊甙及莱鲍迪甙Ａ的吸附能力和吸附选择性，并设计通过树脂柱的动态色层法从甜菊甙含量高的甜菊糖中成功地分离出高莱鲍迪甙Ａ糖产品．     

吸附树脂AB—8对甜菊甙的吸附性能及在其提取纯化中的应用

考察了大孔吸附树脂ＡＢ－８对甜菊甙的吸附性能，和溶液的ＨＰ值，洗脱剂的种类及流速对树脂吸附，脱附性能的影响，结果表明，ＡＢ－８树脂对甜菊甙吸附量高，循环使用性能好且易于洗脱。     

季铵基吸附树脂的合成及其在甜菊式甙提取分离中的应用

研究了由工业二乙烯苯聚合得到的大孔树脂进行氯甲基化的可行性，考察了聚合物孔结构催化剂用量、反应温度和时间等因素对氯甲基化反应的影响，由氯甲基化树脂制备了强极性季铵基吸附剂。并研究了合成的季铵基吸附剂对甜叶菊提取物中甜菊甙及色素的吸附－脱附性能，发现该吸咐剂对甜菊甙与色素的吸附－脱附性能完全不同，因而可用该吸附剂制备高品质的甜菊式。     

大孔吸附树脂合成及从甜叶菊中提取分离甜菊甙的研究

本文合成了一系列用于从甜叶菊提取液中吸附分离甜菊甙的大孔吸附树脂，测定了它们的孔结构参数及吸附量，并比较了吸附量较高的五种树脂的循环使用性能及解吸性能。实验结果表明，Ｍ－３５树脂吸附量大，解吸率高，用树脂法工艺制备的甜菊甙产品纯度高，质量好。     

2—聚苯乙烯磺酰基乙醇树脂的合成及其在海因和脲固相合成中的应用

合成了一种新型的聚合物载体－－2－聚苯乙烯磺酰基乙醇，并研究其在固相有机合成中的应用。聚苯乙烯亚磺酸钠树脂（1）在相转移催化剂Bu4NI和助催化剂KI的作用下，与氯乙醇进行砜化反应，得到含羟基功能基的2－聚苯乙烯磺酰基乙醇树脂2。树脂2用Boc保护的氨基酸酯化，封闭树脂上未反应的羟基，用酸脱保护并用三乙胺中和，再与异（硫）氰酸苯酯反应生成聚合物支载的脲树脂6。树脂6用酸解脱得到了海因和硫代海因化合物。用碱处理树脂6时得到取代的脲和硫脲。优化了合成反应的全过程，探讨了树脂在酸性条件下的解脱方法。结果表明，2－聚苯乙烯磺酸基乙醇树脂易与羧工形成含酯键的连接桥，连接桥在强酸性和碱性条件下均可解脱得到产物。     

吸附树脂的色层吸附及其在甜菊甙分离纯化中的应用

研究了ADS－7等吸附树脂对甜菊甙各组分的吸附选择性及色层吸附性能,发现ADS－7吸附树脂不仅在吸附甜菊甙时对各个组分呈现出一定的选择吸附顺序,在水洗时还有一定的选择洗脱顺序,这两个顺序正好相反。利用ADS－7吸对脂的这一色层性能,制备了富含甜度最高、味质最好的Rebaudioside A及几科不含色素的高品质甜菊甙,具有很好的实际应用意义。     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

四环素-铕与卵磷脂的相互作用及卵磷脂的测定

以四环素(TC)-Eu3 作为荧光探针,提出了新的荧光光度法测量卵磷脂(PC)。在pH 5.7的酸度条件下,扫描不同浓度的PC与TC-Eu3 的荧光光谱。通过优化实验条件,得到了测定PC的最佳条件。卵磷脂能使TC-Eu3 位于612 nm处的特征荧光显著增强且增强的荧光强度与PC的量成正比。测量的线性范围为4.0×10-7~1.4×10-5mol/L,检出限为3.9×10-8mol/L。该方法已用于实际样品的测定。     

Synthesis and structure of hydroxyisoxazolidines and derivatives of hydroxylamine and alkenals

The reactions of N-substituted hydroxylamines with alkenals serve as a method for the synthesis of the corresponding 2-substituted 3(5)-hydroxyisoxazolidines. The reaction pathway is determined by the nature of the substituent attached to the nitrogen atom. Ring-chain isomerism has been detected in these newly obtained compoundsTranslated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1270–1276, September, 1987.     

Ni(Ⅱ)和Zn(Ⅱ)的乙基黄原酸盐与吡啶碱配合物的合成及性质的研究

乙基黄原酸基的结构为:(简写为Exan,它是一个双齿配体,能和许多金属离子形成稳定配合物。 本文依据实验结果,对3种Ni(Ⅱ)和2种Zn(Ⅱ)的乙基黄原酸盐混合配合物的性质作一些系统的比较.应用红外光谱讨论这些混合配合物的C—O及C—S键振动频率位移;用热谱讨论它们的热稳定性及失重过程的变化;通过组成分析用电子光谱及磁学方     

红霉素9,11-亚胺醚和乙腈分子加合物的合成和晶体结构

通过控制红霉素A (E)肟的贝克曼重排反应条件合成了一种关键中间体红霉素9,11-亚胺醚, 该化合物可与乙腈形成稳定的分子加合物(摩尔比为1∶1), 未见文献报道. 阐述了该化合物的合成、晶体结构、晶体学数据和结构参数. 该化合物为无色透明晶体, 属单斜晶系, 空间群P2₁. 对该加合物和已知化合物红霉素6,9-亚胺醚晶体结构的对照解析, 有助于对重排反应机理、异构化机理和两异构体还原差异性的分析, 对重排反应和还原反应起到积极的指导作用.     

Sizes of atoms and ions and covalency of bonding in molecules and crystals

A new system of atomic radii for the elements up to barium inclusive is constructed. Values of the radii are chosen so as the dependence between the dissociation energy of diatomic homonuclear molecules and a depth of atom overlapping is monotonous, and the scatter of data is minimal. The depth of overlapping is calculated as a difference between the sum of atomic radii and an experimental interatomic distance. Conclusions are made that: the radii of free atoms and ions are determined by the value of the electron density equal to 0.01 au; they considerably change in molecules and crystals only as a result of the charge transfer from cation to anion; covalent bonding is well described by the overlapping of free atoms (ions), confined by the surface of the given radius, and its energy depends upon the depth of overlapping of valence electron densities of atoms. A method of overlapping atoms is proposed for the approximate estimation of ionic sizes and charges in bound systems.     

Interaction and Stability of Mixed Micelle and Monolayer of Nonionic and Cationic Surfactant Mixtures

Interaction and stability of binary mixtures of cationic surfactants hexadecyltrimethylammonium bromide (HTAB) or hexadecylpyridinium bromide (HPyBr) with nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) have been studied at different mole fraction of cationic surfactants by using interfacial tension measurements and fluorescence probe techniques. From interfacial tension measurements, the critical micellar concentration and various interfacial thermodynamic parameters have been evaluated. The experimental cmc's were analyzed with the pseudophase separation model, the regular solution theory, and the Maeda's approach. These approaches allowed us to determine the interaction parameter and composition in the mixed state. By using the static quenching method, the mean micellar aggregation numbers of pure and mixed micelles of HTAB + Mega-10 were obtained. It has been observed that the aggregation number of mixed micelles deviates negatively from the ideal behavior. The micropolarity of the micelle was monitored with pyrene fluorescence intensity ratio and found to be increase with the increase of ionic content. The polarization of fluorescence probe Rhodamine B was monitored at different mole fraction of cationic surfactants.     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

Synthesis and characterization of triazenide and triazene complexes of ruthenium and osmium

Triazenide [M(eta2-1,3-ArNNNAr)P4]BPh4 [M = Ru, Os; Ar = Ph, p-tolyl; P = P(OMe)3, P(OEt)3, PPh(OEt)2] complexes were prepared by allowing triflate [M(kappa2-OTf)P4]OTf species to react first with 1,3-ArN=NN(H)Ar triazene and then with an excess of triethylamine. Alternatively, ruthenium triazenide [Ru(eta2-1,3-ArNNNAr)P4]BPh4 derivatives were obtained by reacting hydride [RuH(eta2-H2)P4]+ and RuH(kappa1-OTf)P4 compounds with 1,3-diaryltriazene. The complexes were characterized by spectroscopy and X-ray crystallography of the [Ru(eta2-1,3-PhNNNPh){P(OEt)3}4]BPh4 derivative. Hydride triazene [OsH(eta1-1,3-ArN=NN(H)Ar)P4]BPh4 [P = P(OEt)3, PPh(OEt)2; Ar = Ph, p-tolyl] and [RuH{eta1-1,3-p-tolyl-N=NN(H)-p-tolyl}{PPh(OEt)2}4]BPh4 derivatives were prepared by allowing kappa1-triflate MH(kappa1-OTf)P4 to react with 1,3-diaryltriazene. The [Os(kappa1-OTf){eta1-1,3-PhN=NN(H)Ph}{P(OEt)3}4]BPh4 intermediate was also obtained. Variable-temperature NMR studies were carried out using 15N-labeled triazene complexes prepared from the 1,3-Ph15N=N15N(H)Ph ligand. Osmium dihydrogen [OsH(eta2-H2)P4]BPh4 complexes [P = P(OEt)3, PPh(OEt)2] react with 1,3-ArN=NN(H)Ar triazene to give the hydride-diazene [OsH(ArN=NH)P4]BPh4 derivatives. The X-ray crystal structure determination of the [OsH(PhN=NH){PPh(OEt)2}4]BPh4 complex is reported. A reaction path to explain the formation of the diazene complexes is also reported.