Mass and NMR spectra of haplophyllidine and perforine and of their derivatives

Conclusions The mass and NMR spectra of haplophyllidine, perforine, and their derivatives have been studied. The influence of the open and cyclic forms of the molecular ion on the nature of the fragmentation has been discussed. The main routes of fragmentation of the compounds considered are due to the presence of substituents at C₈ and C₄.Khimiya Prirodnykh Soedinenii, Vol. 5, No. 4, pp. 273–279, 1969     

The chemical transport of molybdenum and tungsten and of their dioxides and sulfides

Experiments have been made and an extensive thermodynamic discussion has taken place concerning the chemical transport of Mo, W, MoO₂, WO₂, MoS₂ and WS₂ in the presence of iodine. Efforts have been made to find the species via which Mo and W can migrate within the gas phase.Results: In each case the transport proceeds via the oxide iodides MoO₂J₂ and WO₂J₂ respectively, as already known for the dioxides. Thus the chemical transport of Mo, W, MoS₂ and WS₂ needs not only J₂ but also H₂O, usually liberated from the wall of the quartz ampoule.By means of J₂ + H₂O, the metals can be transported into the high temperature region of the ampoule (e.g., 1050 → 1150°C), whereas the transport of the sulfides proceeds in the opposite direction (e.g., 900 → 700°C).For the sulfide-transport the influence of the ratio of the transport agents $\text{J}{}_2\text{H}{}_2\text{O}$ has been discussed.The water content of the quartz glass out of which the ampoules are made is an important source for water, influencing the reactions.The addition of graphite which considerably lowers the H₂O partial pressure prevents any transport of the metals or the sulfides, which proves that the use of J₂ alone as a transport agent is insufficient in these cases.The gaseous iodides MoJ_x and WJ_z are without any importance under the experimental conditions used for the transport of the metals, their dioxides and sulfides.The partial pressures of MoO₂(OH)₂ and WO₂(OH)₂ under the experimental conditions chosen may usually be neglected. But in the system $\text{MoO}{}_2\text{H}{}_2\text{O}$ the transport via MoO₂(OH)₂ (1000 → 800°C) has been observed.The synthesis of MoO₂ and WO₂, starting with the elements or with powder of metal and trioxide is promoted by the addition of J₂. The reaction steps involved are discussed.     

Quantification of polyphenols and flavonoid content and evaluation of anti-inflammatory and antimicrobial activities of Stenocereus stellatus extracts

The hexanic, ethyl acetate and methanolic extracts from branches of Stenocereus stellatus were tested in both the 12-O-tetradecanoylphorbol-13-acetate (TPA) – induced ear oedema model and antimicrobial activity assay. The % of oedema inhibition, the Minimum Inhibitory Concentration (MIC), as well as the polyphenolic and flavonoid content were determined. Also, extracts were analysed by gas chromatography–mass spectrometry (GC–MS). In TPA model, the three extracts showed moderate oedema inhibition. In the antimicrobial activity assay, methanolic extract shows better MIC against all strains. The lowest MICs were for Candida albicans (31 μg/mL) and Rhizopus sp. (15 μg/mL). Also, 50.78 mg eq. of gallic acid/g extract of polyphenol and 115.12 mg eq. of catequine/g extract of flavonoids content were founded in ethyl acetate extract. In the chromatographic analysis, β-sitosterol, β-amyrine, betulin and some other molecules were identified. The results show that S. stellatus possess antimicrobial activities against some fungus species.     

Absorption UV spectroscopy and electronic structure of ionic and tautomeric forms of hydroxy and methoxy derivatives of cytosine and adenine,and of some 5-substituted analogs of pyrimidines

The individual absorption spectra of various ionic and tautomeric species of some derivatives of nucleic-acid components have been determined by computer handling of the summary spectra of these compounds measured at different pH values. These individual spectra have been decomposed into separate bands represented by log-normal curves and corresponding to different electronic transitions. Using the parameter system calculated earlier for the molecules of the vitamin B₆ family, the calculation of the electronic spectra and electronic structure of various ionic and tautomeric species of the molecules studied have been carried out in the π-electron approximation. These properties have also been calculated by the all-valence electronic method CNDOS . The calculated results correlate well with both approximations and with our experimental spectral data. The localization of the molecular electronic excitation studied on the transition to the S₁ and T₁ states is considered in connection with the reactivity in these states.     

Na0.33WO3溶胶及薄膜的制备与光致变色性质研究

无机光致变色材料在图像显示、光记录、信息存储和光转换方面有着巨大的潜在应用前景,引起了材料工作者的广泛重视[1￣3]。氧化钨是一种重要的无机光致变色材料,目前对氧化钨的研究多以无定     

Synthesis and Structure of YbCuGe and YbIrGe

The equiatomic ytterbium–transition metal–germanides YbCuGe and YbIrGe were synthesized in single crystalline form from CuGe and IrGe master alloys and ytterbium via the Bridgman technique and they were characterized through their X-ray powder patterns. The structures were refined from X-ray single crystal diffractometer data: NdPtSb type, P6₃mc, a=421.36(8), c=703.9(1) pm, wR2=0.0234, 210 F² values, 11 variable parameters, BASF=0.35(9) for YbCuGe and TiNiSi type, Pnma, a=671.09(6), b=421.55(5), c=757.16(7) pm, wR2=0.0782, 519 F² values, 20 variable parameters for YbIrGe. The copper (iridium) and germanium atoms build up [CuGe] and [IrGe] networks. In YbCuGe the two-dimensional [CuGe] network consists of puckered layers of Cu₃Ge₃ hexagons (247pm Cu–Ge) that are charge balanced and separated by the ytterbium atoms. In contrast, the ordered Ir₃Ge₃ hexagons show a strong orthorhombic distortion and the [IrGe] network is three-dimensional with a distorted tetrahedral germanium coordination around iridium with almost equal Ir–Ge distances (252–259pm). The ytterbium atoms fill cages within this network. The cell volumes of YbCuGe and YbIrGe are indicative for purely trivalent ytterbium.     

Ellipsometry and x-ray reflectometry characterization of self-assembly process of polystyrenesulfonate and polyallylamine

Self-assembly of polyelectrolytes-polystyrenesulfonate (PSS) and polyallylamine (PAH) with added salts of MnCl and NaBr was studied by x-ray reflectometry and ellipsometry technique. The thickness of PSS-PAH bilayer was measured to be 5.1±0.2 nm according to reflectometry and 6.1±0.7 nm according to ellipsometry. The discrepancy in data is attributed to the difference in the interaction of the interfaces with x-rays and visible light. The films are found to be rather homogeneous and the deposition process regular. The refraction indices of the deposited films were found to ben ₀=1.50±0.05,k ₀=0.07±0.05,n _e=1.53±0.05k _e=0, optical axis being perpendicular to the surface. The values of refractivity characterize the whole film (up to seven bilayers) and do not vary with increasing thickness.     

Hirshfeld surface analysis and spectroscopic and DFT studies of p-acetotoluidide and p-thioacetotoluidide

The Hirshfeld surface analysis, theoretical calculation, and IR and Raman spectra of p-acetotoluidide and p-thioacetotoluidide were reported. Hirshfeld surfaces and fingerprint plot have been used for visualizing, exploring, and quantifying intermolecular interactions in the crystal lattice of the title compounds. The packing of the molecules in the crystal structure of p-acetotoluidide and p-thioacetotoluidide forms the chains of N–H···O and N–H···S hydrogen bonds, respectively. The close contacts are also dominated by H···H and H···C/C···H interactions. The analysis of Hirshfeld surface has been well correlated with the spectroscopic studies. Theoretical calculations of the title compounds’ isolated molecule have been carried out using DFT at the B3LYP level.     

Synthesis and Structure of YbCuGe and YbIrGe

Summary. The equiatomic ytterbium–transition metal–germanides YbCuGe and YbIrGe were synthesized in single crystalline form from CuGe and IrGe master alloys and ytterbium via the Bridgman technique and they were characterized through their X-ray powder patterns. The structures were refined from X-ray single crystal diffractometer data: NdPtSb type, P6₃mc, a=421.36(8), c=703.9(1) pm, wR2=0.0234, 210 F² values, 11 variable parameters, BASF=0.35(9) for YbCuGe and TiNiSi type, Pnma, a=671.09(6), b=421.55(5), c=757.16(7) pm, wR2=0.0782, 519 F² values, 20 variable parameters for YbIrGe. The copper (iridium) and germanium atoms build up [CuGe] and [IrGe] networks. In YbCuGe the two-dimensional [CuGe] network consists of puckered layers of Cu₃Ge₃ hexagons (247pm Cu–Ge) that are charge balanced and separated by the ytterbium atoms. In contrast, the ordered Ir₃Ge₃ hexagons show a strong orthorhombic distortion and the [IrGe] network is three-dimensional with a distorted tetrahedral germanium coordination around iridium with almost equal Ir–Ge distances (252–259pm). The ytterbium atoms fill cages within this network. The cell volumes of YbCuGe and YbIrGe are indicative for purely trivalent ytterbium.     

Circular and Linear Dichroism of Aggregates of Chlorophyll a and Chlorophyll b in 3-Methylpentane and Paraffin Oil

A circular (CD) and linear dichroism (LD) study of the water adducts of the green plant chlorophylls a (Chl a) and b (Chl b) in hydrocarbon solvents 3-methylpentane and paraffin oil is presented. A strong red shift of the Q_y-absorption band from 663 to 746 nm (1678 cm^?1) is observed as the water adduct of Chl a is formed. The Chl a-water adduct shows a strong, nonconservative CD signal, which is characterized by a positive peak at 748 nm and two negative peaks at 720 and 771 nm. The maximum CD (A_L - A_R) is only one order of magnitude smaller than the isotropic absorption maximum. We propose that this exceptionally strong signal is the so-called psi-type CD. The LD spectrum was measured in a flow of paraffin oil. The isotropic absorption maximum peaks at 742 nm in paraffin oil, whereas the maximum of the LD signal is at 743 nm. The LD signal is positive over the whole water-adduct absorption band indicating that the transition dipole of the 742 nm transition is preferentially oriented along the long axis of the aggregate. The structure of the Chl b-water adduct is less well defined. The preparations of the Chl b-water adduct are unstable. The Chl b-water adduct absorption band maximum is at 683 nm. The CD signal of the Chl a-water adduct is about 200-fold the CD of the Chl b-water adduct. We could not orient the Chl b-water adducts by flow, which suggests that the adducts are small or disordered.     

Radical and anionic homopolymerization of maleimide and N-n-butylmaleimide

The rate of homopolymerization of maleimide has been measured in dimethylformamide solution at 60°C. in the presence of azobisisobutyronitrile; it has been compared to that of N-n-butylmaleimide. The overall rates of polymerization are equal to R_p = k[M]^1.1–1.2 [In]^0.8 for maleimide, and R_p = k'[M] [In]^0.5 for the N-substituted imide. The difference of behavior has been interpreted on the basis of an intramolecular tautomery of the terminal group of the maleimide growing chain and the formation of a resonance-stabilized succinimidyl radical. The relative ease of polymerization of these monomers and of maleic anhydride has been discussed. In the presence of sodium tert-butoxide at 20°C. in dimethylformamide solutions, maleimide polymerizes with hydrogen isomerization. The percentage of N-substituted isomerized units was evaluated at 70–75% by measurement of the rate of hydrolysis in 0.005N sodium hydroxide and comparison with succinimide and N-butylsuccinimide. N-n-butylmaleimide undergoes ring opening together with anionic polymerization in the presence of sodium tert-butoxide at 20°C. and butyllithium at -40°C. Unlike the radical-initiated polymerization, it was impossible to obtain anionic copolymers of maleimide and N-butylmaleimide with acrylonitrile and methyl methacrylate.     

Measurements and predictions of density and carbon dioxide solubility in binary mixtures of ethanol and n-decane

The solubility of carbon dioxide (CO₂) in binary mixtures of ethanol and n-decane has been measured using an in-house developed pressure-volume-temperature (PVT) apparatus at pressures up to 6 MPa and two different temperatures (303.2 and 323.2 K). Three different binary mixtures of ethanol and n-decane were prepared, and the densities of the prepared mixtures were measured over the studied pressure and temperature ranges. The experimental data of CO₂ solubility in the prepared mixtures and their saturated liquid densities were then reported at each temperature and pressure. The solubility data indicated that the gas solubility reduced as the ethanol mole fraction in the liquid mixture increased. The dissolution of CO₂ in the liquid mixtures resulted in the increase in the saturated liquid densities. The impact of gas dissolution on the saturated liquid densities was more pronounced at the lower temperature and lower ethanol compositions. The experimental solubility and density data were compared with the results of two cubic equations of state (EOSs), Soave–Redlich–Kwong (SRK) and Peng–Robinson (PR). The modeling results demonstrated that both EOSs could predict the solubility data well, while the saturated liquid densities calculated with the PR EOS were much better than those predicted with the SRK EOS.     

Kinetics and thermochemistry of the reaction of acetylene and nitric oxide

The shock tube data of Ogura [5] on the pyrolysis of C₂H₂/NO mixtures (1100–1500 K) is shown to be consistent with a simple mechanism whereby radicals are both initiated and terminated by NO (Scheme I). The scheme accounts for the rate of formation of the main product, vinylacetylene (VA), the lesser products CO and HCN and a very minor product, propionitrile. It is also shown to be consistent with other studies below 900 K and observation at 300 K on the reactions of vinyl radicals with NO. The substantial inhibition of vinyl acetylene formation by 5% NO makes untenable any substantial role of vinylidene in the C₂H₂ pyrolysis above 1000°K. The reaction of NO with acetylene is an efficient source of HCN. It appears to be a general reaction of NO with substituted acetylenes and below 900 K a mechanism is presented to account for the production of acrylonitrile (AN) from the reaction of NO with VA. Thermochemical data are estimated on Δ_fH°₂₉₈ and S°₂₉₈ for some alkyl-NO, vinyl NO, and acetylene NO compounds and radicals and some new and some revised group values are estimated for estimating Δ_fH°₂₉₈ of derivatives of hydroxyl amines, imines, and isoxazolines. © 1994 John Wiley & Sons, Inc.     

Synthesis and structure of tetra- and triphenylbismuth arenesulfonates

Tetraphenylbismuth arenesulfonates were synthesized by the reaction of pentaphenylantimony of-bismuth with triphenylbismuth bis(arenesulfonates). Triphenylbismuth bis(arenesulfonates) were synthesized by the reaction of triphenylbismuth with arenesulfonic acids in the presence of hydrogen peroxide. The crystal structures of the tetraphenylbismuth 2,5-dimethylbenzenesulfonate crystal hydrate (1), tetraphenylbismuth 3-carboxy-4-hydroxybenzenesulfonate (2), and triphenylbismuth bis(2,5-dimethylbenzenesulfonate) (3) were determined by X-ray diffraction analysis. The Bi atom in1 has a tetrahedral coordination (bond angles vary from 106.6(6) to 111.9(10)^o). The Bi coordination observed in2 is intermediate between tetrahedral and trigonal-bipyramidal, and that in structure3 is trigonal-bipyramidal, with the oxygen atoms in the axial positions. The Bi−O bond lengths are 2.19(2) and 2.27(2) Å. In the crystal of2, the anions form an infinite hydrogen-bonded chain. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2350–2354, December, 1999.     

Synthesis and vibrational spectroscopy of halotrichite and bilinite

The new uranyl complexes with tetradentate unsymmetrical N₂O₂ Schiff base ligands were synthesized and characterized by IR, UV–vis, NMR and elemental analysis. The DMF solvent is coordinated to uranyl complexes. The thermogravimetry (TG) and differential thermoanalysis (DTA) of the uranyl complexes were carried out in the range of 20–700 °C. The UO₂L¹ complex was decomposed in two and the others were decomposed in three stages. Up to 100 °C, the coordinated solvent was released then the Schiff base ligands were decomposed in one or two steps. Decomposition of synthesized complexes is related to the Schiff base characteristics. The thermal decomposition reaction is first order for the studied complexes.     

Thermodynamic and stereochemical aspects of the polymerizability of glycolide and lactide

The ring-opening polymerizations of the dilactones glycolide and the S,S- and S,R-stereoisomers of lactide were studied using quantum mechanical methods. The ring strain and the conformational distribution of these cyclic monomers and of the polymers were calculated, and the effect of the medium on the polymerization was predicted, for both bulk and solution. The polymerizability of the three monomers in the gas phase, that is, nonpolar medium, is much greater than that of δ-valerolactone or 1,4-dioxan-2-one. This difference vanishes in the polar medium chloroform, which is attributed to the fact that, while all of these monomers possess polar cis-lactone bonds, the three dilactones possess small dipole moments. The data are combined to give polymerization enthalpy and free energy values. The four stereoregular lactide polymers did not differ significantly in energy. Accordingly, the ability to synthesize any one of these rests on catalyst specificity (“polymer chain-end control”). Although introduction of sterically demanding methyl groups into glycolide is expected to favor coiled conformations and decrease polymerizability, this was not found to be the case. Good agreement of calculated values with experimental data from the literature was achieved.     

Structural and dynamical properties of aqueous mixtures of pectin and chitosan

In this study phase separation, structure, and dynamics of aqueous pectin-chitosan mixtures of different ratios and a pure aqueous pectin sample have been investigated under various conditions by turbidimetry, SANS and dynamic light scattering (DLS). Only the mixture with r = 0.75 gelled upon decreasing the temperature ((r ≡ m_pectin/(m_pectin + m_chitosan), where m denotes the mass of the considered component). The pure pectin sample (r = 1) did not gel and the decrease in temperature seemed to promote phase separation. The addition of chitosan reduced the tendency of pectin to phase separate in the mixtures of pectin and chitosan. The general trend when cooling the samples was that the turbidity and the growth of the turbidity became more pronounced as the amount of pectin in the mixture was increased. The wavelength dependence of the turbidity indicated a change of the conformation of pectin chains from an extended form to a more compact structure in pectin solutions without chitosan as the temperature decreased. This was not observed for the mixture of pectin and chitosan. SANS measurements revealed excess scattered intensity in the low wave vector area with the strongest upturn for the pure pectin sample (r = 1). DLS experiments showed longer slow relaxation times after a temperature quench for all samples, with the most pronounced effect for the mixture of pectin and chitosan with r = 0.75. The synergism between pectin and chitosan at high pectin contents (r = 0.75) generated large association complexes over time.     

Oxidation of Metal Sulphides and Determination of Characteristic Temperatures by DTA and TG

The oxidation of metal sulphides and sulphide concentrates was studied by means of DTA, TG and DTG curves. The behaviour of ZnS, CdS, GaS, Tl₂S, Sb₂S₃ and Sb₂S₅ during thermal treatment in an oxidizing medium was investigated. The properties of these sulphides were compared and conclusions were drawn about their probable oxidation reactions and the kind of end-products obtained. The characteristic temperatures of the studied sulphides were determined on the basis of curves (DTA). The values obtained were used to compare the behaviour of the sulphides during the oxidation process in a fluid bed. The results can be used to improve the technological and economic indices in the industrial production of zinc. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and pharmacological activities of some dibenzopyrazolocinnolines and dibenzopyridazinoquinoxalines

Derivatives of three new classes of heterocyclic compounds have been synthesized. The first class comprises the synthesis of pyrimidino- and imidazolopyrazolopyridazine using 11 H-dibenzo[f,h]pyrazolo[3,4-c]-cinnoline-13-amine. The second class involves the synthesis of triazine derivatives using 11 H-dibenzo-[f,h]pyrazolo[3,4-c]cinnoline-13-diazonium chloride. The third class deals with the synthesis of polycyclic compounds using dibenzo[f,h]pyridazino[4,5-b]quinoxaline-10,13-diamine. The pharmacological screening has shown that several of these compounds have good antiparkinsonian activities comparable to Benzatropine. The detailed synthesis, spectroscopic data, and pharmacological properties are reported.