Polyaddition of bis(seven‐membered cyclic carbonate) with diamines: A novel and efficient synthetic method for polyhydroxyurethanes

This article deals with the polyaddition of a novel bis(seven‐membered cyclic carbonate), 1,2‐bis[3‐(1,3‐dioxepan‐2‐one‐5‐yl)‐propylthio]ethane, with the diamines 4,9‐dioxa‐1,12‐dodecanediamine and p‐xylylenediamine. The polyaddition was carried out at 30–70 °C for 6–24 h in dimethyl sulfoxide to obtain the corresponding polyhydroxyurethanes with number‐average molecular weights of 10,900–35,700 in good yields. The reaction of a monofunctional seven‐membered cyclic carbonate, 5‐allyl‐1,3‐dioxepan‐2‐one (7CC), with monoamines was also carried out to examine the reactivity in comparison with that of six‐ and five‐membered cyclic carbonates. The reaction rate constants of 7CC with n‐hexylamine and benzylamine were estimated to be 48.5 and 11.0 L/mol · h, respectively, in dimethyl sulfoxide‐d₆ (initial reagent concentration = 1 M) at 30 °C. The seven‐membered cyclic carbonate ring was 2.98 and 5.82 kcal/mol more strained than those of the six‐ and five‐membered cyclic carbonates, respectively, according to a semiempirical molecular orbital calculation with the PM3 Hamiltonian. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4091–4100, 2001     

Addition of five‐membered cyclic carbonate with amine and its application to polymer synthesis

A bifunctional five‐membered cyclic carbonate was synthesized from carbon dioxide and diglycidyl terephthalate, and its polyaddition with alkyl diamines were carried out in DMF at room temperature to obtain the corresponding poly(hydroxyurethane)s with M_n s in the range of 6300–13200 in good yields. The structures of the obtained polymers were confirmed by IR and NMR spectroscopy and their glass‐transition and decomposition temperatures were observed at 3–29 °C and 182–277 °C, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2375–2380, 2000     

Synthesis and characterization of novel aliphatic polycarbonates

A new six‐membered cyclic carbonate monomer, 5‐benzyloxy‐trimethylene carbonate, was synthesized from 2‐benzyloxy‐1,3‐propanediol, and the corresponding polycarbonate, poly(5‐benzyloxy‐trimethylene carbonate) (PBTMC), was further synthesized by ring‐opening polymerization in bulk at 150 °C using aluminum isobutoxide [Al(OⁱBu)₃], aluminum isopropoxide, or stannous octanoate as an initiator. The results showed that a higher molecular weight polycarbonate could be obtained in the case of Al(OⁱBu)_3. The protecting benzyl group was removed subsequently by catalytic hydrogenation to give a polycarbonate containing a pendant hydroxyl group (PHTMC). The polycarbonates obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR,¹³C NMR, gel permeation chromatography, and DSC. NMR results of PBTMC offered no evidence for decarboxylation occurring during the propagation. The pendant hydroxyl group in PHTMC resulted in an enhancement of the hydrophilicity of the polycarbonate. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 70–75, 2002     

Allyl ethers as combined plasticizing and crosslinkable side groups in polycarbonate‐based polymer electrolytes for solid‐state Li batteries

Allyl ether‐functional polycarbonates, synthesized by organocatalytic ring‐opening polymerization of the six‐membered cyclic carbonate monomer 2‐allyloxymethyl‐2‐ethyltrimethylene carbonate, were used to prepare non‐polyether polymer electrolytes. UV‐crosslinking of the allyl side groups provided mechanically stable electrolytes with improved molecular flexibility—T_g below ?20 °C—and higher ionic conductivity—up to 4.3 × 10^?7 S/cm at 25 °C and 5.2 × 10^?6 S/cm at 60 °C—due to the plasticizing properties of the allyl ether side groups. The electrolyte function was additionally demonstrated in thin‐film Li battery cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2128–2135     

Tunable poly(hydroxyl urethane) from CO2‐Based intermediates using thiol‐ene chemistry

CO₂‐based, crosslinked poly(hydroxyl urethane)s (PHUs) are accessed via a set of efficient reactions based on the addition chemistry of thiol‐ene and amines‐cyclic carbonates. This strategy to utilize 5‐membered cyclic carbonates produced from CO₂ is robust, facile, modular, and atomically efficient in nature. The thiol‐ene reaction was utilized to access bis(cyclic carbonate), tris(cyclic carbonate), and tetrakis(cyclic carbonate) in quantitative yield from 4‐vinyl‐1,3‐dioxolan‐2‐one and thiols. Multi‐functional cyclic carbonates were simply mixed with diethylenetriamine and/or 1,6‐diaminohexane to generate crosslinked PHUs from 25 to 80 °C. These materials are easy to scale‐up and are potential candidates in many applications such as coatings, binders, and resins. The resulting polymers have glass transition temperatures between ?1 and 16 °C and thermal decomposition temperatures from 190 to 230 °C. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Reactivity comparison of five‐ and six‐membered cyclic carbonates with amines: Basic evaluation for synthesis of poly(hydroxyurethane)

The reaction of six‐ and five‐membered cyclic carbonates, 5‐(2‐propenyl)‐1,3‐dioxan‐2‐one ( 1 ) and 4‐(3‐butenyl)‐1,3‐dioxolan‐2‐one ( 2 ) with hexylamine and benzylamine was carried out in N,N‐dimethylacetamide at 30, 50, and 70 °C. The six‐membered cyclic carbonate 1 proceeded quantitatively with hexylamine at 30 °C for 24 h, while the five‐membered cyclic carbonate 2 converted in 34%. The reaction rate constants at 50 °C are evaluated as follows; 1.42 L/mol · h ( 1 with hexylamine) > 0.29 L/mol · h ( 1 with benzylamine) > 0.04 L/mol · h ( 2 with hexylamine) > 0.01 L/mol · h ( 2 with benzylamine). The activation energies in the reactions of 1 and 2 with hexylamine were estimated to be 10.1 and 24.6 kJ/mol, respectively. The ring‐strain energy was calculated by the semi‐empirical method using the PM3 Hamiltonian. The ring‐strain energy of the six‐membered cyclic carbonate was 2.86 kcal/mol larger than that of five‐membered one. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 162–168, 2001     

Synthesis of hydrocarbon polymers containing bulky dibenzobicyclic moiety by ROMP and their characteristic optical properties

The eight‐membered cyclic monomer, prepared by Diels–Alder reaction of 1,5‐cyclooctadiene and anthracene, polymerized via Ru‐catalyzed ring‐opening metathesis to efficiently afford high polymers (M_n up to 631,000). Unsaturated moieties in the main chain of the obtained polymer were hydrogenated with a homogeneous ruthenium catalyst in quantitative conversion, confirmed by ¹H‐NMR measurement. The self‐standing membranes were provided by casting the tetrahydrofuran solutions of both nonhydrogenated and hydrogenated polymers. The obtained membranes showed high transparency in the region of >300 nm with mechanical flexibility. Thermal gravimetric analysis revealed that both nonhydrogenated and hydrogenated polymers decomposed in two stages. The first‐stage decomposition starting at around 230 °C was caused by retro Diels–Alder reaction forming anthracene, proven by pyrolysis gas chromatography mass spectroscopy (GC‐MS) analyses. Mechanical grinding of the polymers induced the formation of anthracene in solid state, which transformed the polymer into blue‐luminescent materials under UV irradiation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1392–1400     

Poly(hydroxyisobutyrate) by ring‐opening polymerizations of 5,5‐dimethyl‐1,3,2‐dioxithiolan‐4‐one‐2‐oxide

α‐Hydroxyisobutyric acid anhydrosulfate HiBAS (5,5‐dimethyl‐1,3,2‐dioxithiolan‐4‐one‐2‐oxide) was polymerized under various reaction conditions and the solid reaction products were characterized by ¹H NMR spectroscopy, MALDI‐TOF mass spectrometry (MT m.s.), fast atom bombardment mass spectrometry (FAB m.s.), viscosity, and SEC measurements. Thermal polymerizations at 100 °C mainly yielded cyclic oligo polyesters presumably resulting from a zwitterionic polymerization. Cycles were also detected when pyridine was used as catalyst at 20 °C. When triethylamine was used as catalyst traces of H₂O played the role of initiators. Benzyl alcohol initiated the polymerization of HiBAS at 100 °C and yielded a polyester terminated by one benzylester and one OH endgroup. The SEC measurements indicated that all samples possess relatively low molar masses with number–average molecular weights ≤ 10,000 Da (in contrast to the literature data). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6229–6237, 2008     

Cationic addition polymerization of 1,4‐dioxene using gacl3 as lewis acid catalyst: Long‐lived species‐mediated polymerization

Effective cationic addition polymerization of 1,4‐dioxene, a six‐membered cyclic olefin with two oxygen atoms adjacent to the double bond, was performed using a simple metal halide catalyst system in dichloromethane. The polymerization was controlled when the reaction was conducted using GaCl₃ in conjunction with an isobutyl vinyl ether–HCl adduct as a cationogen at –78°C to give polymers with predetermined molecular weights and relatively narrow molecular weight distributions. The long‐lived properties of the propagating species were further confirmed by a monomer addition experiment and the analyses of the product polymers by ¹H NMR and MALDI–TOF–MS. Although highly clean propagation proceeded, the apparent rate constant changed during the controlled cationic polymerization of 1,4‐dioxene. The reason for the change was discussed based on polymerization results under various conditions. The obtained poly(1,4‐dioxene) exhibited a very high glass transition temperature (T_g) of 217°C and unique solubility. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and cationic ring‐opening polymerization of oxetane monomer containing five‐membered cyclic carbonate moiety via highly chemoselective addition of CO2

The bicyclic amidinium iodide effectively catalyzed the reaction of carbon dioxide and the epoxy‐containing oxetane under ordinary pressure and mild conditions with high chemoselectivity to give the corresponding oxetane monomer containing five‐membered cyclic carbonate quantitatively. The cationic ring‐opening polymerization of the obtained monomer by boron trifluoride diethyl ether proceeded to give linear polyoxetane bearing five‐membered cyclic carbonate pendant group in high yield. The molecular weight of the polyoxetane was higher than that of polyepoxide obtained by the cationic ring‐opening polymerization of epoxide monomer containing five‐membered cyclic carbonate. The cyclic carbonate functional crosslinked polyoxetanes were also synthesized by the cationic ring‐opening copolymerization of cyclic carbonate having oxetane and commercially available bisoxetane monomers. Analyses of the resulting polyoxetanes were performed by proton nuclear magnetic resonance, size exclusion chromatography, thermogravimetric analysis, and differential scanning calorimetry. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2606–2615     

Facile synthesis and crosslinking reaction of trifunctional five‐membered cyclic carbonate and dithiocarbonate

The trifunctional five‐membered cyclic carbonate 2 and dithiocarbonate 3 were successfully synthesized by the reaction of trifunctional epoxide 1 with carbon dioxide and carbon disulfide, respectively. The crosslinking reactions of 2 with p‐xylylenediamine or hexamethylenediamine were carried out in dimethyl sulfoxide at 100 °C for 48 h to produce the corresponding crosslinked poly(hydroxyurethane)s quantitatively. The crosslinking reactions of 3 with both p‐xylylenediamine and hexamethylenediamine, followed by acetylation of thiol moiety, produced the corresponding crosslinked poly(thioester–thiourethane)s quantitatively. The obtained crosslinked poly(hydroxyurethane)s were thermally more stable than the analogous crosslinked poly(thioester–thiourethane)s, probably because of less thermal stability of thiourethane moiety than hydroxyurethane moiety. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5983–5989, 2004     

Mild incorporation of CO2 into epoxides: Application to nonisocyanate synthesis of poly(hydroxyurethane) containing triazole segment by polyaddition of novel bifunctional five‐membered cyclic carbonate and diamines

The cyclic amidinium iodide effectively catalyzed the ring‐expansion addition of epoxides with carbon dioxide under ordinary pressure and mild conditions to obtain the corresponding five‐membered cyclic carbonates in high yield. The novel triazole‐linked bifunctional five‐membered cyclic carbonate was synthesized successfully by the click reaction of the azide‐ and the alkyne‐substituted five‐membered cyclic carbonates under ambient temperature in high yield. The chemical structure of the novel bis(cyclic carbonate) was characterized by one‐ and two‐dimensional nuclear magnetic resonance spectra. The obtained bis(cyclic carbonate) was converted with commercially available diamines to poly(hydroxyurethane) containing triazole segment without catalyst in high yield. Analyses of the resulting poly(hydroxyurethane)s were performed by proton nuclear magnetic resonance, size exclusion chromatography, thermogravimetric analysis, and differential scanning calorimetry. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 986–993     

Synthesis of periodic copolymers via ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran using nonafluorobutanesulfonimide as an organic catalyst and subsequent transformation to aliphatic polyesters

To synthesize polyesters and periodic copolymers catalyzed by nonafluorobutanesulfonimide (Nf₂NH), we performed ring‐opening copolymerizations of cyclic anhydrides with tetrahydrofuran (THF) at 50–120 °C. At high temperature (100–120 °C), the cyclic anhydrides, such as succinic anhydride (SAn), glutaric anhydride (GAn), phthalic anhydride (PAn), maleic anhydride (MAn), and citraconic anhydride (CAn), copolymerized with THF via ring‐opening to produce polyesters (M_n = 0.8–6.8 × 10³, M_n/M_w = 2.03–3.51). Ether units were temporarily formed during this copolymerization and subsequently, the ether units were transformed into esters by chain transfer reaction, thus giving the corresponding polyester. On the other hand, at low temperature (25–50 °C), ring‐opening copolymerizations of the cyclic anhydrides with THF produced poly(ester‐ether) (M_n = 3.4–12.1 × 10³, M_w/M_n = 1.44–2.10). NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed that when toluene (4 M) was used as a solvent, GAn reacted with THF (unit ratio: 1:2) to produce periodic copolymers (M_n = 5.9 × 10³, M_w/M_n = 2.10). We have also performed model reactions to delineate the mechanism by which periodic copolymers containing both ester and ether units were transformed into polyesters by raising the reaction temperature to 120 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polymer‐supported pyridinium catalysts for synthesis of cyclic carbonate by reaction of carbon dioxide and oxirane

Polymer‐supported pyridinium salts, prepared by quaternarization of crosslinked poly(4‐vinylpyridine) with alkyl halides, effectively catalyze the reaction of carbon dioxide (1 atm) and glycidyl phenyl ether (GPE) to afford the corresponding five‐membered cyclic carbonate (4‐phenoxymethyl‐1,3‐dioxolan‐2‐one). Poly(4‐vinylpyridine) quarternarized with alkyl bromides show high catalytic activities, and the reaction of carbon dioxide (1 atm) and GPE at 100 °C affords 4‐phenoxymethyl‐1,3‐dioxolan‐2‐one quantitatively in 6 h. The rate constant in the reaction of GPE and carbon dioxide in N‐methyl pyrrolidinone using poly(4‐vinylpyridine) quarternarized with n‐butyl bromide (k_obs = 102 min^?1) is almost comparable with those for homogeneous catalysts with good activities (e.g., LiI), and the rate of the reaction obeys the first‐order kinetics. A used catalyst may be recovered by centrifugation, and the recycled catalyst also promotes the reaction of GPE and carbon dioxide. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5673–5678, 2007     

Cyclic polypeptides by thermal polymerization of α‐amino acid N‐carboxyanhydrides

The NCAs of the following five amino acids were polymerized in bulk at 120 °C without addition of a catalyst or initiator: sarcosine (Sar), L ‐alanine (L ‐Ala), D ,L ‐phenylalanine (D ,L ‐Phe), D ,L ‐leucine (D ,L ‐Leu) and D ,L ‐valine (D,L ‐Val). The virgin reaction products were characterized by viscosity measurements ¹³C NMR spectroscopy and MALDI‐TOF mass spectrometry. In addition to numerous low molar mass byproducts cyclic polypeptides were formed as the main reaction products in the mass range above 800 Da. Two types of cyclic oligo‐ and polypeptides were detected in all cases with exception of sarcosine NCA, which only yielded one class of cyclic polypeptides. The efficient formation of cyclic oligo‐ and polypeptides explains why high molar mass polymers cannot be obtained by thermal polymerizations of α‐amino acid NCAs. Various polymerization mechanisms were discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4012–4020, 2008     

Synthesis and characterization of novel poly(ester‐carbonate)s by copolymerization of trans‐4‐hydroxy‐L‐proline with cyclic carbonate

The melt ring‐opening/condensation reaction of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L‐proline (N‐CBz‐Hpr) with cyclic carbonate [trimethylene carbonate (tri‐MC) or tetramethylene carbonate (tetra‐MC)] at a wide range of molar fractions in the feed produced new degradable poly(ester‐carbonate)s. The influence of reaction conditions such as polymerization time and temperature on the yield and inherent viscosity of the copolymers was investigated. The polymerizations were carried out in bulk at 140 °C with 1.5 wt % stannous octoate as a catalyst for 30 h. The poly(ester‐carbonate)s obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR, differential scanning calorimetry, gel permeation chromatography, and Ubbelohde viscometry. The copolymers synthesized exhibited moderate molecular weights with rather narrow molecular weight distributions. The values of the glass‐transition temperature (T_g) of the copolymers depend on the molar fractions of cyclic carbonate. For the poly(N‐CBz‐Hpr‐co‐tri‐MC) system, with a decreased tri‐MC content from 93 to 16 mol %, the T_g increased from ?10 to 60 °C. Similarly, for the poly(N‐CBz‐Hpr‐co‐tetra‐MC) system, when the tetra‐MC content decreased from 80 to 8 mol %, the T_g increased from ?18 to 52 °C. The relationship between the poly(N‐CBz‐Hpr‐co‐tri‐MC) T_g and the compositions was in approximation with the Fox equation. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐tri‐MC)s was evaluated from weight‐loss measurements. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1435–1443, 2003     

New polymer syntheses. CXI. Aliphatic polyesters by the ring‐opening polycondensation of glutaric anhydride with ethylene or trimethylene carbonate

Several polycondensations of ethylene carbonate with succinic anhydride or glutaric anhydride (GA) were conducted in bulk. Low molar mass polyesters were obtained with pyridine‐type catalysts and GA. Analogous polycondensations of trimethylene carbonate (TMC) and GA were successful when quinoline, 4‐(N,N‐dimethylamino)pyridine, or BF₃ · OEt₂ was used as a catalyst. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra revealed the formation of cyclic oligoesters and polyesters by backbiting degradation. Monomer mixtures containing an excess of TMC yielded copoly(ester carbonate)s with number‐average molecular weights up to 16,000 Da. Analogous copoly(ester carbonate)s were obtained from TMC and 3,3′‐tetramethylene glutaric anhydride. Furthermore, combined polycondensation/ring‐opening polymerization reactions of TMC and GA with L ‐lactide or ?‐caprolactone were studied. All copolymers were characterized by viscosity measurements and by IR, ¹H, and ¹³C NMR spectroscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4357–4367, 2002     

Synthesis and properties of renewable nonisocyanate polyurethanes (NIPUs) from dimethylcarbonate

Novel fully renewable AA‐BB type nonisocyanate polyurethanes (NIPUs) were synthesized using the transurethanization approach. Dicarbamate monomers were prepared by the reaction of a diamine with an excess of dimethylcarbonate (DMC), in presence of 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (TBD) as catalyst. Then, the dicarbamate was reacted with a diol to afford the polymer, in presence of TBD or K₂CO₃ as catalyst. Several renewable diamines and diols were tested. The two steps were conducted under neat conditions. The obtained materials exhibited T_g values varying from ?38 to 42 ° C, T_m values varying from 42 to 204 °C , and thermal stabilities above 200 ° C. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1351–1359     

Fibrillar structure of resorbable microblock copolymers based on 1,5‐dioxepan‐2‐one and ε‐caprolactone

The copolymerization of 1,5‐dioxepan‐2‐one (DXO) and ε‐caprolactone, initiated by a five‐membered cyclic tin alkoxide initiator, was performed in chloroform at 60 °C. Copolymers with different molar ratios of DXO (25, 40, and 60%) were synthesized and characterized. ¹³C NMR spectroscopy of the carbonyl region revealed the formation of copolymers with a blocklike structure. Differential scanning calorimetry measurements showed that all the copolymers had a single glass transition between ?57 and ?49 °C and a melting temperature in the range of 30.1–47.7 °C, both of which were correlated with the amount of DXO. An increase in the amount of DXO led to an increase in the glass‐transition temperature and to a decrease in the melting temperature. Dynamic mechanical thermal analysis measurements confirmed the results of the calorimetric analysis, showing a single sharp drop in the storage modulus in the temperature region corresponding to the glass transition. Tensile testing demonstrated good mechanical properties with a tensile strength of 27–39 MPa and an elongation at break of up to 1400%. The morphology of the copolymers was examined with polarized optical microscopy and atomic force microscopy; the films that crystallized from the melt showed a short fibrillar structure (with a length of 0.05–0.4 μm) in contrast to the untreated solution‐cast films. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2412–2423, 2003     

Multifunctional Cyclic Carbonates Comprising Hyperbranched Polyacetals: Synthesis and Applications to Polymer Electrolytes and Networked Polymer Materials

Hyperbranched polyacetals (HBPAs) bearing cyclic carbonate (CC) terminals were synthesized from protocatechuric aldehydes bearing bifunctional trimethylolpropane (TMP) or glycerol (Gly) structures and then utilized to design polymer electrolytes and networked polymer materials. Since TMP‐based cyclic acetals (CAs) are thermodynamically more stable than Gly‐derived CSs, the copolymerization of these monomers favors to form HBPAs comprising TMP‐based acetal stems and Gly terminals. Consequently, HBPAs composed of larger amounts of TMP or Gly terminals were separately synthesized by changing monomer feed ratios. Their diol terminals react efficiently with diphenyl carbonate to give HBPAs bearing 5‐ or 6‐membered CC (5‐CC or 6‐CC) terminals. HBPAs bearing 5‐CC terminals were mixed homogeneously with lithium bis(trifluoromethanesulfonyl)imide to form uniform films showing lithium ion conductivity ranging from 8.2 × 10^?9 to 2.1 × 10^?3 S cm^?1 at 23–80 °C, whereas networked polycarbonate and polyhydroxyurethane films were successfully fabricated using HBPAs having CC terminals. These results apparently indicate that HBPAs having CC terminals are useful scaffolds to design functional polymer materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2295–2303