兴安落叶松针叶挥发油的GC-MS和启发渐进式特征投影法分析

采用水蒸气蒸馏法提取兴安落叶松针叶挥发油,利用气相色谱.质谱(GC-MS)联用对挥发油进行成分测定,并对其重叠色谱峰采用启发渐进式特征投影(HELP)法进行分辨,得到各组分的纯色谱峰和质谱,然后采用峰面积归一化法确定各化合物的相对含量.共分离出110种化合物,鉴定了70种化合物,占挥发油总量的93.09%,其中单萜、倍半萜和二萜的含量分别为31.92%、53.29%和6.91%.     

用熵最小算法解析桂郁金挥发油GC-MS重叠谱

采用气相色谱-质谱(GC-MS)联用技术对桂郁金中提取的挥发油成分进行检测,同时用熵最小算法对其中的共流物色谱峰进行解析,并通过质谱库检索和程序升温保留指数相结合的方式对解析得到的各纯组分进行定性分析。将桂郁金挥发油各组分的质谱数据直接与美国国家标准及技术研究所(NIST)数据库进行比对,鉴定出38个化合物;在挥发油的色谱图中,存在一些因分离不完全而导致的共流物色谱峰,以保留时间为1 106.52~1 108.38 s及1 184 s的色谱峰为例,经熵最小算法解析,共发现5个纯组分。采用熵最小算法可以清楚地对共流物色谱峰进行解析并得到所包含的各个纯组分,该法可提高复杂成分定性定量分析结果的准确性。     

利用气相色谱/质谱-化学计量学分辨法分析川芎挥发性成分

采用加速溶剂萃取法提取挥发性成分,气相色谱-质谱(GC-MS)联用分析,并借助化学计量学分辨方法,对川芎的挥发性成分进行了定性定量分析。通过采用子窗口因子分析法对重叠色谱峰进行分辨,从而获得每一组分的纯色谱和质谱。依靠每一组分纯质谱在NIST质谱库进行相似性检索而定性分析,用总体积积分法进行定量分析。在川芎挥发油中共分辨出67个色谱峰,通过质谱库检索得到其中56个组分的定性定量结果,占总含量的87.67%。该方法增加了可鉴定化合物的数目,提高了定性的准确度,能用于川芎的质量控制。     

GC-MS法测定油漆行业废气化学成分及化学计量学解析

采用GU/MS法分离测定油漆行业废气污染物化学成分,利用化学计量学解析法(CRM)对重叠的色谱峰进行解析,得到各成分的纯色谱曲线和质谱,通过质谱库对解析的纯组分进行定性,用解析色谱曲线积分法进行定量.从25个色谱峰中解析出了49个组分,按检索相似度大于90%的原则,鉴定出了其中40个化合物,占总含量的92.3%.废气污染物的主要成分为苯系物和烷烃,分别占总含量的46.8%和27.2%.     

沙枣花挥发油化学成分的研究

本文用自制的水蒸汽蒸馏－溶剂萃取装置从沙枣花鲜花中提取挥发油，测得其含量为0.1%,用毛细管气相色谱-质谱法对挥发油的化学成分进行了研究,色谱分离出85个组分,质谱鉴定了其中47个组分,主要组分为反式肉桂酸乙酯,占总色谱峰面积的78.88%,IR和NMR为主要成分的鉴定提供了佐证。     

粉苞苣挥发油化学成分的GC-MS测定分析

利用气相色谱 质谱联用技术对粉苞苣的挥发油成分进行分析测定.从这种植物挥发油的45个峰中鉴定出27个化合物,所鉴定的组分占挥发油色谱总峰面积的77.25%.     

木香挥发性化学成分的气相色谱-质谱分析

采用水蒸气蒸馏法从木香中提取挥发油,用气相色谱-质谱联用仪对木香挥发油进行化学成分的分析。利用化学计量学方法对重叠峰进行分辨,对各个色谱峰定性,并用色谱峰总体积积分和归一化法获得各化合物的相对含量。共鉴定了60种化合物,占挥发油总成分的97%以上。其中主要有土木香内酯、巴西菊内酯、(Z)6,(Z)9-十五二烯-1-醇等。     

气相色谱-质谱法与化学计量学分辨法分析当归须挥发油中化学成分

本文借助化学计量学分辨方法,建立了用气相色谱-质谱(GC-MS)联用法分析当归须挥发油成分的方法.对重叠色谱峰采用直观推导式演进特征投影算法进行分辨,从而获得每一组分的纯色谱和质谱,依靠每一组分纯质谱在NIST质谱库进行相似性检索而定性分析,用总体积积分法进行定量分析.在当归须挥发油中共分辨出86个色谱峰,通过质谱库检...     

大蒜挥发油组分的质谱研究

本文介绍采用水蒸汽蒸馏的方法,从大蒜中提取出一种浅黄色的挥发油。用毛细管气相色谱-质谱联用技术,发现了挥发油中至少含有15种以上个组分。根据这些组分的质谱特征,定性识别了其中10种成分,它们都是有机硫化合物,文中给出了这些化合物的质谱图和结构式,讨论了其中二种物质的质谱裂解规律。     

模差渐进投影法解析重叠色谱峰

提出了一种鉴别重叠色谱峰类型的化学计量学方法——模差渐进投影(MDEP)法。该方法利用二维色谱数据中相邻两个色谱流出点的光谱矢量模的和与该两个矢量和的模之差,建立模差-时间(dm-t)曲线判断非纯色谱峰的纯组分区,同时判定第二组分色谱流出点和倒数第二组分色谱结束点。分别以纯组分区的光谱矢量建立正交阵对该色谱峰进行投影运算,得到投影后转换色谱。该转换色谱消除了纯组分区所对应化合物的色谱和光谱信息。对转换色谱重复上述操作至整个色谱峰的模差-时间曲线均为0时终止,得到重叠色谱峰各组分的色谱流出点和结束点。利用上述结果,采用不包含待测组分光谱信息的该重叠峰二维色谱数据建立正交矩阵对该色谱峰进行投影运算,获得待测组分的相似色谱图。通过比对分析即可得到该组分在重叠色谱峰中的光谱和色谱信息。依次操作,即可获得重叠色谱峰中各组分的光谱和色谱信息。采用模差渐近投影法对4组分模拟重叠二维色谱峰及杜香挥发油GC-MS的重叠色谱峰进行了解析,方法简便、结果准确。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.