载钛羟基磷灰石光催化降解内分泌干扰物双酚A

对载钛羟基磷灰石（TiHAP）进行了透射电镜、X射线衍射、紫外-可见光谱和Zeta电位表征,并应用液相色谱-质谱技术对比了TiHAP和P25 TiO₂对环境内分泌干扰物双酚A（BPA）的吸附和光催化降解性能,探讨了富里酸和Fe³⁺对TiHAP薄膜光催化性能的影响。结果表明,TiHAP和TiO₂粉体对BPA的吸附符合Langmuir吸附等温方程,且前者吸附性能更大。TiHAP薄膜光催化降解BPA的性能优于TiO₂薄膜;富里酸和Fe³⁺对TiHAP和TiO₂薄膜光催化性能的影响趋势不同,从能带结构、电子转移和吸光性等角度分析了性能不同的原因。本结果可以为应用TiHAP降解环境内分泌干扰物提供依据。     

Visible-light-driven Oxygen Vacancy and Carbon Doping of C@TiO2-x Photocatalyst for Enhanced Pollutants Degradation Performance

Oxygen Vacancy (OVs) and carbon doping of the photocatalyst body will significantly enhance the photocatalytic efficiency. However, synchronous regulation of these two aspects is challenging. In this paper, a novel C@TiO_2-x photocatalyst was designed by coupling the surface defect and doping engineering of titania, which can effectively remove rhodamine B (RhB) and has a relatively high performance with wide pH range, high photocatalytic activity and good stability. Within 90 minutes, the photocatalytic degradation rate of RhB by C@TiO_2-x (94.1 % at 20 mg/L) is 28 times higher than that of pure TiO₂. Free radical trapping experiments and electron spin resonance techniques reveal that superoxide radicals (⋅O²⁻) and photogenerated holes (h⁺) play key roles in the photocatalytic degradation of RhB. This study demonstrates the possibility of regulating photocatalysts to degrade pollutants in wastewater based on an integrated strategy.     

Synthesis and photocatalytic properties of core–shell TiO~2@ZnIn_2S_4 photocatalyst

A novel core–shell TiO2@ZnIn2S4composite has been synthesized successfully by a simple and flexible hydrothermal route using TiO2as precursors.The as-synthesized samples were characterized by X-ray diffraction,UV–vis diffuse reflectance spectra and transmission electron microscopy.The photocatalytic properties of samples were tested by degradation of aqueous methylene blue（MB）under visible light irradiation.It was found that the as-synthesized TiO2@ZnIn2S4photocatalyst was more effcient than TiO2and ZnIn2S4in the photocatalytic degradation of MB.Moreover,TEM images confrmed the TiO2@ZnIn2S4nanoparticles possessed a well-proportioned core–shell morphology.     

Fe3+掺杂TiO2/凹凸棒复合光催化剂的制备和光催化活性

用酸催化溶胶-凝胶法制备了Fe³⁺掺杂TiO₂/凹凸棒（Fe³⁺-TiO₂/ATP）复合光催化剂,对其结构、微观形貌、光吸收性能和可见光下的光催化性能进行了表征。XRD和TEM测试结果表明,Fe³⁺-TiO₂/ATP具有较好的热稳定性,经450 ℃热处理后的ATP晶体结构基本保持不变,锐钛矿TiO2均匀的分布在ATP表面,TiO2颗粒之间无团聚,且平均粒径小于纯TiO₂。UV-Vis-DRS测试结果表明,Fe³⁺的掺杂可明显增强复合光催化剂对可见光的吸收,光响应范围拓展到了整个紫外-可见光区。在可见光下,Fe³⁺-TiO₂/ATP复合光催化剂对亚甲基蓝具有很好的催化降解活性。Fe³⁺-TiO₂/ATP的反应速率常数分别为TiO₂/ATP、P25和纯TiO2的1.37、4.83和6.51倍。复合光催化剂的沉降性能优于纯TiO2和P25,易于分离。     

Preparation of Ag3PO4/TiO2(B) Heterojunction Nanobelt with Extended Light Response and Enhanced Photocatalytic Performance

Photocatalytic degradation, as an emerging method to control environmental pollution, is considered one of the most promising environmental purification technologies. As Tibet is a region with some of the strongest solar radiation in China and even in the world, it is extremely rich in solar energy resources, which is ideal for applying photocatalytic technology to its ecological environment protection and governance. In this study, Na₂Ti₃O₇ nanobelts were prepared via a hydrothermal method and converted to TiO₂∙xH₂O ion exchange, which was followed by high-temperature calcination to prepare TiO₂(B) nanobelts (“B” in TiO₂(B) means “Bronze phase”). A simple in situ method was used to generate Ag₃PO₄ particles on the surface of the TiO₂ nanobelts to construct a Ag₃PO₄/TiO₂(B) heterojunction composite photocatalyst. By generating Ag₃PO₄ nanoparticles on the surface of the TiO₂(B) nanobelts to construct heterojunctions, the light absorption range of the photocatalyst was successfully extended from UV (ultraviolet) to the visible region. Furthermore, the recombination of photogenerated electron–hole pairs in the catalyst was inhibited by the construction of the heterojunctions, thus greatly enhancing its light quantum efficiency. Therefore, the prepared Ag₃PO₄/TiO₂(B) heterojunction composite photocatalyst greatly outperformed the TiO₂(B) nanobelt in terms of photocatalytic degradation.     

Regulating the Coordination Environment of MOF-Templated Single-Atom Nickel Electrocatalysts for Boosting CO2 Reduction

The general synthesis and control of the coordination environment of single-atom catalysts (SACs) remains a great challenge. Herein, a general host–guest cooperative protection strategy has been developed to construct SACs by introducing polypyrrole (PPy) into a bimetallic metal–organic framework. As an example, the introduction of Mg²⁺ in MgNi-MOF-74 extends the distance between adjacent Ni atoms; the PPy guests serve as N source to stabilize the isolated Ni atoms during pyrolysis. As a result, a series of single-atom Ni catalysts (named Ni_SA-N_x-C) with different N coordination numbers have been fabricated by controlling the pyrolysis temperature. Significantly, the Ni_SA-N₂-C catalyst, with the lowest N coordination number, achieves high CO Faradaic efficiency (98 %) and turnover frequency (1622 h⁻¹), far superior to those of Ni_SA-N₃-C and Ni_SA-N₄-C, in electrocatalytic CO₂ reduction. Theoretical calculations reveal that the low N coordination number of single-atom Ni sites in Ni_SA-N₂-C is favorable to the formation of COOH* intermediate and thus accounts for its superior activity.     

Highly Efficient Photocatalytic Remediation of Simulated Polycyclic Aromatic Hydrocarbons (PAHs) Contaminated Wastewater under Visible Light Irradiation by Graphene Oxide Enwrapped Ag3PO4 Composite.

Effective removal of polycyclic aromatic hydrocarbons (PAHs) from wastewater before their discharge into the environment is an ever pressing requirement. In this study, for the first time, simulated PAHs contaminated wastewater was photocatalytically remediated with graphene oxide (GO) enwrapped silver phosphate as visible light‐driven photocatalysts. The GO/Ag₃PO₄ photocatalysts exhibited superior photocatalytic activity and stability compared with pure Ag₃PO₄, g‐C₃N₄ and TiO₂ (P25). The degradation efficiency of naphthalene, phenanthrene and pyrene could reach 49.7%, 100.0% and 77.9%, rspectively within 5 min irradiation. The apparent rate constants of photocatalytic degradation of 3 wt% GO/Ag₃PO₄ composite photocatalyst were 0.14, 1.21 and 2.46 min⁻¹ for naphthalene, phenanthrene and pyrene, respectively. They were about 1.8, 1.5 and 2.0 times higher than that of pure Ag₃PO₄, and much higher than that of g‐C₃N₄ and TiO₂. Meanwhile, the efficiencies of 44.6%, 95.2% and 83.8% were achieved for naphthalene, phenanthrene and pyrene degradation even after 5 times of recycling in the GO/Ag₃PO₄‐PAHs photocatalysis system. Reactive species of ∙O₂⁻ and h⁺ were considered as the main participants for oxidizing naphthalene, phenanthrene and pyrene.     

Synthesis,characterization and photocatalytic application of TiO2/magnetic graphene for efficient photodegradation of crystal violet

A magnetized nano‐photocatalyst based on TiO₂/magnetic graphene was developed for efficient photodegradation of crystal violet (CV). Scanning electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy and elemental mapping were used to characterize the prepared magnetic nano‐photocatalyst. The photocatalytic activity of the synthesized magnetic nano‐photocatalyst was evaluated using the decomposition of CV as a model organic pollutant under UV light irradiation. The obtained results showed that TiO₂/magnetic graphene exhibited much higher photocatalytic performance than bare TiO₂. Incorporation of graphene enhanced the activity of the prepared magnetic nano‐photocatalyst. TiO₂/magnetic graphene can be easily separated from an aqueous solution by applying an external magnetic field. Effects of pH, magnetized nano‐photocatalyst dosage, UV light irradiation time, H₂O₂ amount and initial concentration of dye on the photodegradation efficiency were evaluated and optimized. Efficient photodegradation (>98%) of the selected dye under optimized conditions using the synthesized nano‐photocatalyst under UV light irradiation was achieved in 25 min. The prepared magnetic nano‐photocatalyst can be used in a wide pH range (4–10) for degradation of CV. The effects of scavengers, namely methanol (OH^? scavenger), p‐benzoquinone (O₂^?? scavenger) and disodium ethylenediaminetetraacetate (hole scavenger), on CV photodegradation were investigated.     

Photocatalytic activity of TiO2 prepared by adding polyethyleneglycol

TiO₂ was produced by the sol-gel method with the addition of polyethyleneglycol (PEG) to study the effects of the molecular weight and the addition percentage of PEG. Bisphenol A (BPA) degradation rate constants were highest as 3.07, 4.02 and 4.23 h⁻¹ at PEG addition percentages of 10%, 5% and 0.5%. After 12 h reaction, the total organic carbon (TOC) reductions in UV/TiO₂, UV/TiO₂/PEG(200, 10%), UV/TiO₂/PEG(600, 5%) and UV/TiO₂/PEG(3500, 0.5%) systems were 44%, 24%, 19% and 23%, in order. The results demonstrated that adding an appropriate percentage of PEG to the TiO₂ preparation processes increased the BPA degradation and TOC reduction.     

玻璃微珠/Ag/TiO2可见光催化剂的制备与表征

通过离子交换法将Ag纳米颗粒负载于玻璃微珠的表面及浅表层,并以钛酸四丁酯的乙醇溶液为前驱体,将TiO₂负载于包含银的玻璃微珠表面,制得一种玻璃微珠/Ag/TiO₂复合光催化剂。由于纳米银的表面等离子体吸收效应,该复合光催化剂具有一定的可见光响应特性。利用XRD、SEM对样品进行表征,可发现玻璃微珠表面形成一层均匀多孔的锐钛矿TiO₂,其粒径均在50 nm左右。由漫反射光谱可得出该催化剂具有较强的可见光吸收,并在降解甲基橙溶液的试验中表现出较好的可见光催化活性。     

Oxidative and Photochemical Stability of Ionomers for Fuel‐Cell Membranes

To predict hydroxyl‐radical‐initiated degradation of new proton‐conducting polymer membranes based on sulfonated polyetherketones (PEK) and polysulfones (PSU), three nonfluorinated aromatics are chosen as model compounds for EPR experiments, aiming at the identification of products of HO^.‐radical reactions with these monomers. Photolysis of H₂O₂ was chosen as the source of HO^. radicals. To distinguish HO^.‐radical attack from direct photolysis of the monomers, experiments were carried out in the presence and absence of H₂O₂. A detailed investigation of the pH dependence was performed for 4,4′‐sulfonylbis[phenol] ( SBP ), bisphenol A (= 4,4′‐isopropylidenebis[phenol]; BPA ), and [1,1′‐biphenyl]‐4,4′‐diol ( BPD ). At pH ≥ pK_A of HO^. and H₂O₂, reactions between the model compounds and O₂^.? or ¹O₂ are the most probable ways to the phenoxy and ‘semiquinone’ radicals observed in this pH range in our EPR spectra. A large number of new radicals give evidence of multiple hydroxylation of the aromatic rings. Investigations at low pH are particularly relevant for understanding degradation in polymer‐electrolyte fuel cells (PEFCs). However, the chemistry depends strongly on pH, a fact that is highly significant in view of possible pH inhomogeneities in fuel cells at high currents. It is shown that also direct photolysis of the monomers leads to ‘semiquinone’‐type radicals. For SBP and BPA , this involves cleavage of a C? C bond.     

Enhancing the photocatalytic activity of Ga2O3–TiO2 nanocomposites using sonication amplitudes for the degradation of Rhodamine B dye

A Ga₂O₃–TiO₂ photocatalyst was synthesized by a mechanomixing method followed by a sonication technique using different amplitudes of sonication (0%, 25%, 50%, and 75% of 20 kHz). The prepared photocatalysts were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Fourier-transform infrared, Brunauer–Emmett–Teller (BET) surface area (S_BET), zeta potential, and optical techniques. Ga₂O₃–TiO₂ exhibited an excellent photocatalytic activity for Rhodamine B (RhB) dye degradation under UV irradiation. The RhB degradation rate rose linearly with the increase of sonication amplitude. The photodegradation rate (k) of the synthesized samples was calculated according to the Langmuir–Hinshelwood kinetic expression. It reached a maximum of 5.25 × 10⁻² min⁻¹ with R² of 0.99 for Ga₂O₃–TiO₂ (75%) photocatalysts. The main reactive species were detected through radical scavenging experiments. The formation of hole reactive species is the rate-determining step in the case of Ga₂O₃–TiO₂ (75%) photocatalysts.     

Synthesis and photocatalytic activity of co-doped mesoporous TiO2 on Brij98/CTAB composite surfactant template

Using composite surfactant templates, polyoxyethylene (20) oleyl ether (Brij98) and cetyl trimethyl ammonium bromide (CTAB), as structure-directing agents, N and La co-doped mesoporous TiO₂ complex photocatalysts were synthesized successfully. The micromorphology of co-doped mesoporous TiO₂ samples was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transformed infrared spectroscopy (FT-IR), energy-dispersive X-ray spectrometer (EDS) and N₂ adsorption-desorption measurements. The results indicated that the complex photocatalyst prepared with a molar ratio of Brij98:CTAB=1:1 showed a uniform pore size of ca. 7 nm and a high specific surface area (S_BET) of 279.0 m² g⁻¹, and exhibited the highest photocatalytic activity for degradation of papermaking wastewater under ultra-violet light irradiation. The chemical oxygen demand (CODc_r) percent degradation was about 73% in 12 h and chroma percent degradation was 100% in 8 h.     

Visible light photocatalytic activity and Photoelectrochemical property of Fe-doped TiO<Subscript>2</Subscript> hollow spheres by sol–gel method

Fe-doped TiO₂ hollow spheres (Fe-THs) were synthesized by sol–gel process using carbon spheres as templates. The prepared samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectrum (DRS), N₂ adsorption–desorption isotherms, Electron paramagnetic resonance (EPR) spectroscopy and Photoluminescence emission spectroscopy (PL). UV–vis spectra showed that Fe³⁺ doping could extend the absorption edge to the visible region. EPR spectra showed that Fe³⁺ was incorporated into the crystal lattice of TiO₂, which could inhibit the recombination of photo-induced electron–hole pairs and improve the photocatalytic activity. The photocatalytic activities of the prepared samples were evaluated for the degradation of dye Reactive Brilliant Red X-3B (C.I. reactive red 2) under visible light irradiation. The results indicated that Fe³⁺ doping sample showed the highest photocatalytic activity with an optimal doping concentration of 0.50 wt%. The recycle ability of the Fe-THs was also investigated. After 5 cycles, the degradation rate was still higher than 90%, decreased by only 6.36% compared to the first cycle. Moreover, in order to characterize the electron-transferring efficiency in the process of photocatalysis reaction, a photocurrent-time spectrum was examined by anodic photocurrent response.     

Ag3PO4/MoS2纳米片复合催化剂制备及可见光催化性能

采用机械球磨法成功制备Ag₃PO₄/MoS₂纳米片复合催化剂。运用X射线衍射仪（XRD）、透射电子显微镜（TEM）、扫描电子显微镜（SEM）、紫外可见漫反射光谱（UV-Vis）和荧光发射光谱（PL）对复合催化剂的结构和形貌进行了表征。结果表明,Ag₃PO₄纳米粒子均匀地附着在MoS₂纳米片层结构上,两者形成紧密结合。以亚甲基蓝为模拟污染物,研究复合催化剂在可见光照射下的光催化特性;通过循环实验考察复合催化剂的稳定性。结果显示,含有1%的MoS₂纳米片与Ag₃PO₄形成的复合催化剂在30 min内对亚甲基蓝的降解率为95%,其降解动力学常数是纯相Ag₃PO₄的2倍。经过5次循环实验后复合催化剂对于亚甲基蓝的降解率为84%,而纯Ag₃PO₄对于亚甲基蓝的降解率仅为35%。Ag₃PO₄/MoS₂纳米片复合催化剂具有优良的光催化活性和高稳定性,主要归因于二硫化钼纳米片与磷酸银形成异质结,磷酸银激发的电子和二硫化钼纳米片产生的空穴直接复合,从而促使光生电子从磷酸银晶体表面快速分离,减轻了磷酸银的光电子腐蚀,同时也提高了复合物的光催化活性。     

Ag_3PO_4/MoS_2纳米片复合催化剂制备及可见光催化性能

采用机械球磨法成功制备Ag_3PO_4/MoS_2纳米片复合催化剂。运用X射线衍射仪(XRD)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis)和荧光发射光谱(PL)对复合催化剂的结构和形貌进行了表征。结果表明,Ag_3PO_4纳米粒子均匀地附着在MoS_2纳米片层结构上,两者形成紧密结合。以亚甲基蓝为模拟污染物,研究复合催化剂在可见光照射下的光催化特性;通过循环实验考察复合催化剂的稳定性。结果显示,含有1%的MoS_2纳米片与Ag_3PO_4形成的复合催化剂在30 min内对亚甲基蓝的降解率为95%,其降解动力学常数是纯相Ag_3PO_4的2倍。经过5次循环实验后复合催化剂对于亚甲基蓝的降解率为84%,而纯Ag_3PO_4对于亚甲基蓝的降解率仅为35%。Ag_3PO_4/MoS_2纳米片复合催化剂具有优良的光催化活性和高稳定性,主要归因于二硫化钼纳米片与磷酸银形成异质结,磷酸银激发的电子和二硫化钼纳米片产生的空穴直接复合,从而促使光生电子从磷酸银晶体表面快速分离,减轻了磷酸银的光电子腐蚀,同时也提高了复合物的光催化活性。     

Preparation of high‐activity AgBr/Ag3PO4 photocatalyst based on hexadecyltrimethylammonium bromide and mechanism of photocatalytic enhancement

A high‐activity AgBr/Ag₃PO₄ heterojunction photocatalyst was synthesized based on hexadecyltrimethylammonium bromide. Its microspheres were characterized using X‐ray diffractometry, transmission electron microscopy and ultraviolet–visible diffuse reflectance spectroscopy. The new photocatalyst with high photocatalytic activity exceptionally outperforms pure Ag₃PO₄ and AgBr in methyl orange degradation. The enhancement of photocatalytic activity is attributed to the efficient separation of electron–hole pairs. In this photocatalytic reaction, h⁺ and ^?O^2? are the main reactive species that induce visible‐light‐driven degradation.     

水热法制备Ag3PO4/HAP复合光催化剂及其光催化性能（英文）

以牡蛎壳为原料,利用水热法合成高纯度的羟基磷灰石(HAP)载体,经磷酸银负载后,制备出纳米棒状Ag3PO4/HAP复合光催化剂。利用扫描电镜(SEM)、高分辨透射电镜(HRTEM)、X射线衍射(XRD)、X射线光电子能谱仪(XPS)对样品进行表征,并考察不同的制备因素对催化剂降解亚甲基蓝溶液性能的影响。结果表明,当质量比为1∶2时制备的1∶2-Ag3PO4/HAP催化剂的表现最为突出,在10 min时即可达到50%的降解率,在40 min时基本降解完全,是一种高效的复合光催化剂。     

Degradation of tetracycline hydrochloride by ultrafine TiO2 nanoparticles modified g-C3N4 heterojunction photocatalyst: Influencing factors,products and mechanism insight

The unique heterojunction photocatalyst of graphite carbon nitride（g-C₃N₄） modified ultrafine TiO₂（gC₃N₄/Ti O₂） was successfully fabricated by electrochemical etching and co-annealing method. However,the effects of various environmental factors on the degradation of TC by g-C₃N₄/Ti O2and the internal reaction mechanism are still unclear. In this study, the effects of initial p H, anions, and cations on the ph...     

微波水热两步法合成高可见光响应Ag2S/ZnO及其光催化性能、机理

在不同的制备条件下,通过微波水热两步法获得了一系列Ag₂S/ZnO光催化剂,采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、紫外-可见漫反射吸收光谱(UV-Vis/DRS)、扫描电子显微镜(SEM)和N₂吸附-脱附等测试手段对产物结构和形貌进行了表征。结果表明,产物以六方纤锌矿ZnO为主,其晶型结构并未随着反应温度和Ag₂S物质的量的增加而改变。Ag₂S的引入显著增强了光催化剂在可见光区的吸收,使吸收边带发生红移,同时抑制了ZnO(001)晶面的生长。另外,所得产物的形貌随着Ag₂S物质的量的增加从爆米花状转变为少量的柱体颗粒,且BET比表面积经过复合后明显减小。以罗丹明B为目标降解物,研究并比较了一系列Ag₂S/ZnO光催化剂对罗丹明B的光降解性能。结果表明,n_Ag2S/n_ZnO为1:10时,光催化剂在紫外光、可见光和模拟日光的照射下具有最好的光催化效果,优于目前应用最广泛的市售P25。另外,所制备的光催化材料Ag₂S/ZnO经4次循环使用后,其降解效率没有明显下降,表明该催化材料具有一定的光催化稳定性。经捕获实验研究发现,在Ag₂S/ZnO的光催化反应中空穴起主要作用,并根据绝对电负性估算了复合材料Ag₂S/ZnO的能带位置,据此提出了可能的光催化反应机理。