Novel Photodynamic Therapy Using Water-dispersed TiO2–Polyethylene Glycol Compound: Evaluation of Antitumor Effect on Glioma Cells and Spheroids In Vitro

Titanium dioxide (TiO₂) is thought to be a photocatalytic agent excited by UV light. Our aim was to investigate the photocatalytic antitumor effect of water-dispersed TiO₂ nanoparticles on C6 rat glioma cells and to evaluate the treatment responses by the spheroid models. Water-dispersed TiO₂ nanoparticles were constructed by the adsorption of chemical modified polyethylene glycol (PEG) on the TiO₂ surface (TiO₂/PEG). Each monolayer and spheroid of C6 cells was coincubated with various concentrations of TiO₂/PEG and subsequently irradiated with UV light. Damage of the cells and spheroids was evaluated sequentially by staining with the fluorescent dyes. The cytotoxic effect was correlated with the concentration of TiO₂/PEG and the energy dose of UV irradiation. More than 90% of cells were killed after 13.5 J cm⁻² of UV irradiation in the presence of 500 μg mL⁻¹ TiO₂/PEG. The irradiated spheroids in the presence of TiO₂/PEG showed growth suppression compared with control groups. In TiO₂/PEG-treated spheroids, the number of Annexin V-FITC-stained cells gradually increased during the first 6 h, and subsequently propidium iodide-stained cells appeared. The results of this study suggest that newly developed photoexcited TiO₂/PEG have antitumoral activity. Photodynamic therapy utilizing this material can be a clue to a novel therapeutic strategy for glioma.     

Ag-single atoms modified S1.66-N1.91/TiO2-x for photocatalytic activation of peroxymonosulfate for bisphenol A degradation

In this study,Ag_0.23/(S_1.66-N_1.91/TiO_2-x) single-atom photocatalyst was synthesized by in-situ photoreducing of silver on S,N-TiO_2-x nanocomposite and used to degrade bisphenol A（BPA） through heterogeneous activation of potassium peroxymonosulfate（PMS） under visible-light illumination.The structure,physicochemical property,morphology,and electronic property were evalutated by X-ray diffraction（XRD）,Raman spectrum,X-ray photoelectron spectra（...     

Mesoporous Titania-Silica nanocomposite as an effective material for the degradation of Bisphenol A under visible light

A simple and very effective method is proposed for the removal of Bisphenol A (BPA) under visible light using mesoporous TiO₂-SiO₂ nanocomposite. The material was characterized using FTIR, XRD, DRS, XPS, FESEM, HRTEM, and BET techniques. The photo degradation efficiency of TiO₂-SiO₂ compared with bare TiO₂. The effect of calcination temperature on the photo-degradation of the materials is also studied. The radical intermediates formed during the degradation of BPA were followed with different radical scavengers. The solution after reaction is subjected to TOC (Total Organic Carbon content) and LCMS analysis to determine the mineralization rate and degradation products exist in the solution. Kinetic studies were revealed that the degradation process follow pseudo first order kinetics.     

TiO2–carbon nanotube heterojunction arrays with a controllable thickness of TiO2 layer and their first application in photocatalysis

TiO₂–carbon nanotube (CNT) heterojunction arrays on Ti substrate were fabricated by a two-step thermal chemical vapor deposition (CVD) method. CNT arrays were first grown on Ti substrate vertically, and then a TiO₂ layer, whose thickness could be controlled by varying the deposition time, was deposited on CNTs. Measured by electrochemical impedance spectroscopy (EIS), the thickness of the TiO₂ layer could affect the photoresponse ability significantly. About 100 nm thickness of the TiO₂ layer proved to be best for efficient charge separation among the tested samples. The optimized TiO₂–CNT heterojunction arrays displayed apparently higher photoresponse capability than that of TiO₂ nanotube arrays which was confirmed by surface photovoltage (SPV) technique based on Kelvin probe and EIS. In the photocatalytic experiments, the kinetic constants of phenol degradation with TiO₂–CNT heterojunctions and TiO₂ nanotubes were 0.75 h⁻¹ (R² = 0.983) and 0.39 h⁻¹ (R² = 0.995), respectively. At the same time, 53.7% of total organic carbon (TOC) was removed with TiO₂–CNT heterojunctions, while the removal of TOC was only 16.7% with TiO₂ nanotubes. These results demonstrate the super capability of the TiO₂–CNT heterojunction arrays in photocatalysis with comparison to TiO₂-only nanomaterial.     

Synthesis and photocatalytic applications of Ag/TiO2-nanotubes

TiO₂- and Ag/TiO₂-nanotubes (NTs) were synthesized by hydrothermal methods and microwave-assisted preparation, respectively. Scanning electron microscopy, high resolution transmission electron microscopy, Brunauer-Emmett-Teller particle surface area measurement and X-ray diffraction were used to characterize the nanotubes. Rutile TiO₂-NTs with Na₂Ti₅O₁₁ crystallinity had a length range of 200-400 nm and diameters of 10-20 nm. TiO₂- and Ag/TiO₂-NTs with a 0.4% deposition of Ag had high surface areas of 270 and 169 m² g⁻¹, respectively. The evaluation of photocatalytic activity showed that Ag/TiO₂-NTs displayed higher photocatalytic activity than pure TiO₂-NTs and a 60.91% degradation of Rhodamine-B with 0.8% deposition of Ag species. Also 60% of Rhodamine-6G was physisorbed and 40% chemisorbed on the surface of TiO₂-NTs. In addition, the photocatalytic degradations of organochlorine pesticides taking α-hexachlorobenzene (BHC) and dicofol as typical examples, were compared using Ag/TiO₂-NTs, and found that their degradations rates were all higher than those obtained from commercial TiO₂.     

Effects of hydroxyl radicals and oxygen species on the 4-chlorophenol degradation by photoelectrocatalytic reactions with TiO2-film electrodes

The supported nano-TiO₂ electrode was prepared by sol–gel and hydrothermal method, and the photoelectrocatalytic degradation of 4-chlorophenol (4-CP) under UV irradiation has been investigated to reveal the roles of hydroxyl radicals and dissolved oxygen species for TiO₂-assisted photocatalytic reactions. The degradation kinetics, the formation and decay of intermediates, the isotopic tracer experiments with H₂O¹⁸, the removal yield of total organic carbon and the formation of active radical species in the presence of oxygen or not were examined by HPLC, GC–MS, TOC and spin-trap ESR spectrometry. It was found that most of OH radicals in the primary hydroxylated intermediates derived from the oxidation of adsorbed H₂O or HO⁻ by photo-holes in the electrochemically assisted TiO₂ photocatalytic system. It also indicates that the enhancement in the separation efficiency of photogenerated charges by applying a positive bias (+0.5 V vs SCE) has little role in the following decomposition and mineralization of these hydroxylated intermediates in the absence of oxygen. According to above experimental results, the pathway of 4-CP photocatalytic degradation was deduced initially. Due to the combined effect of OH radicals and dissolved oxygen species, the hydroxylated 4-chlorphenol, via cis, cis-3-chloromuconic acid, was decomposed into low molecular weight acid and CO₂.     

Synthesis,characterization and photocatalytic performance of W,N, S-tri-doped TiO2 under visible light irradiation

W–S–N-tri-doped TiO₂ photocatalysts (WSNTiO₂) were prepared by a simple sol–gel method. Tungstic acid, sodium sulfate and urea were used as tungsten, sulfur and nitrogen sources, respectively. The morphology and microstructure characteristics of the photocatalysts were evidenced by means of XRD, BET, TEM, SEM and UV–vis DRS techniques. The XRD results show that the main crystal phase of samples is anatase. It was also found that the tri-doping of TiO₂ increases its BET specific surface area from 95 to 121 m²·g⁻¹. Besides, it was shown that tri-doping narrows the band gap of TiO₂ effectively, which has greatly improved the photocatalytic activity in the visible light region. The photocatalytic activity of tri-doped TiO₂ powders was compared to that of bi-doped ones through the degradation of Congo Red (CR) under visible irradiation. Thus, the prepared 0.5% W–N–S–TiO₂ heat treated at 450 °C showed the best photocatalytic activity compared to the prepared pure TiO₂, Degussa P25, and co-doped samples (WNTiO₂ and WSTiO₂). In particular, a Congo Red degradation rate of approximately 99% was reached after only 35 min of visible light irradiation in the presence of 0.5% of WNSTiO₂. Total organic carbon (TOC) removal of CR was up to 72% and confirmed its significant mineralization in the presence of 0.5% of WNSTiO₂ photocatalyst.     

UV-assisted degradation of propiconazole in a TiO2 aqueous suspension: identification of transformation products and the reaction pathway using GC/MS

Photocatalytic degradation of propiconazole, a triazole pesticide, in the presence of titanium dioxide (TiO₂) under ultraviolet (UV) illumination was performed in a batch type photocatalytic reactor. A full factorial experimental design technique was used to study the main effects and the interaction effects between operational parameters in the photocatalytic degradation of propiconazole in a batch photo-reactor using the TiO₂ aqueous suspension. The effects of catalyst concentration (0.15–0.4 gL^?1), initial pH (3–9), initial concentration (5–35 mg L^?1) and light conditions were optimised at a reaction time duration of 90 min by keeping area/volume ratio constant at 0.919 cm² mL^?1. Photocatalytic oxidation of propiconazole showed 85% degradation and 76.57% mineralisation under UV light (365 nm/30 Wm^?2) at pH 6.5, initial concentration 25 mg L^?1 and constant temperature (25 ± 1 °C). The Langmuir–Hinshelwood kinetic model has successfully elucidated the effects of the initial concentration on the degradation of propiconazole and the data obtained are consistent with the available kinetic parameters. The photocatalytic transformation products of propiconazole were identified by using gas chromatography–mass spectrometry (GC/MS). The pathway of degradation obtained from mass spectral analysis shows the breakdown of transformation products into smaller hydrocarbons (m/z 28 and 39).     

Photodegradation of dye pollutants on TiO<Subscript>2</Subscript> pillared bentonites under UV light irradiation

TiO₂ pillared bentonite samples dried under different conditions are used to degrade 2,4-dichlorophenol and orange II under UV light irradiation. The supercritical dried sample exhibits a high activity for the photodegradation of 2,4-dichlorophenol and orange II due to its structural features. TOC and COD are measured during the degradation of 2,4-dichlorophenol under UV light irradiation using P25 and TiO₂ pillared bentonite samples dried under different conditions. The clay-based catalysts can be readily separated by filtration or sedimentation.     

Photocatalytic degradation of sulfadiazine in suspensions of TiO2 nanosheets with exposed (001) facets

Antibiotics such as sulfonamides are widely used in agriculture as growth promoters and medicine in treatment of infectious diseases. However, the release of these antibiotics has caused serious environmental problems. In this paper, photocatalytic oxidation technology was used to degrade sulfadiazine (SDZ), one of the typical sulfonamides antibiotics, in UV illuminated TiO₂ suspensions. It was found that TiO₂ nanosheets (TiO₂-NSs) with exposed (001) facets exhibit much higher photoreactivity towards SDZ degradation compared to TiO₂ nanoparticles (TiO₂-NPs) with a rate constant increases from 0.017 min⁻¹ to 0.035 min⁻¹, improving by a factor of 2.1. Under the attacking of reactive oxygen species (ROSs) such as superoxide radicals (O₂^–) and hydroxyl radicals (OH), SDZ was steady degraded on the surface of TiO₂-NSs. Based on the identification of the produced intermediates by LC–MS/MS, possible degradation pathways of SDZ, which include desulfonation, oxidation and cleavage, were put forwards. After UV irradiation for 4 h, nearly 90% of the total organic carbon (TOC) can be removed in suspensions of TiO₂-NSs, indicating the mineralization of SDZ. TiO₂-NSs also exhibits excellent stability in photocatalytic degradation of SDZ in wide range of pH. Even after recycling used for 7 times, more than 91.3% of the SDZ can be efficiently removed, indicating that they are promising to be practically used in treatment of wastewater containing antibiotics.     

Catalytic degradation of gaseous benzene by using TiO2/goethite immobilized on palygorskite: Preparation,characterization and mechanism

The nano-TiO₂/goethite/palygorskite catalysts were prepared by sol–gel method. The morphology and structure of the catalysts were analyzed by X-ray diffraction (XRD), UV–Vis reflection spectrometer, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and N₂ adsorption-desorption measurement. The results indicated that the self-made catalysts had excellent catalytic performance on gaseous benzene degradation. In the case of benzene concentration at 30 mg/m³, the degradation efficiency, over TiO₂/goethite/palygorskite composite with mass ratio of 10:5:5, reached 70.4% after 180 min 254 nm UV irradiation. The reaction mechanism and kinetics study showed that palygorskite/goethite/TiO₂ composites photocatalytic degradation benzene was mainly caused by oxidizing property of electron–holes and oxygen synergy effect.     

Photocatalytic Degradation of Styrene in Aqueous Solution: Central Composite Design Optimization

In this study, the response surface methodology was first applied to optimize the photocatalytic degradation of styrene in aqueous phase under UV/TiO₂ system. Twenty experiments were done by adjusting three parameters (styrene concentration, TiO₂ dose, and pH) at five levels. Optimal experimental conditions for arbitrary aqueous styrene concentration (115 mg L^?1) were found: initial pH 7 and TiO₂ loading 2 g L^?1 with photocatalytic degradation efficiency of 79.2%. Furthermore, the main degradation intermediate produced was identified by GC/MS. The total organic carbon results revealed that the photocatalysis process could be effectively mineralized. Kinetics of the photocatalytic reaction followed a pseudo-first-order model.     

Preparation of nanocrystalline TiO<Subscript>2</Subscript> powders for photocatalytic oxidation of phenol

Nanocrystalline TiO₂ powders in the anatase, rutile, and mixed phases prepared by hydrolysis of TiCl₄ solution were of ultrafine size (<7.2 nm) with high specific surface areas in the range 167 to 388 m²/g. In the photocatalytic degradation of phenol as model reaction, the photocatalytic properties of TiO₂ nanoparticles were evaluated by use of UV–vis absorption spectroscopy and total organic carbon (TOC) content. The synthetic mixed-phase TiO₂ powder calcined at 400 °C had higher activity than pure anatase or rutile; it degraded more than 90% phenol to CO₂ (evaluated by TOC) after irradiation with near UV light for 90 min at a catalyst loading of 0.4 g/L. The TOC results indicated that rutile TiO₂ crystallites of particle size 7.2 nm resulted in much better photocatalytic performance than particles of larger size. This result suggested that some intermediates, not determined by UV–vis absorption spectroscopy, existed in the solution after the photocatalytic process over the rutile TiO₂ photocatalysts of larger crystallite size.     

Preparation of diatomite–TiO<Subscript>2</Subscript> composite for photodegradation of bisphenol-A in water

To enhance the photodegradation performance of pure titanium dioxide (TiO₂), diatomite was used as a porous carrier to immobilize TiO₂ powders using calcination method. The photodegradation of bisphenol-A (BPA; 4,4′-isopropylidenediphenol), which has been listed as one of endocrine disrupting chemicals, was carried out in a batch suspension reactor using pure TiO₂ powders and diatomite–TiO₂ composites, respectively. Under the controlled conditions, the photocatalytic efficiencies of the BPA degradation by the diatomite–TiO₂ composites can be found to be higher than those by pure TiO₂ powders. This result should be attributable to the accessibility of the BPA molecules to the surface of TiO₂ particle in the modified photocatalysts, showing that the enrichment of the organic solute enhanced the rate of photodegradation on the diatomite–TiO₂ composite. However, the photodegradation efficiency was not dependent on the pore properties of these TiO₂ photocatalysts. The experimental results further indicated that the photodegradation kinetics for the destruction of BPA in water followed the first-order model well. The apparent first-order reaction constants (k _obs), thus obtained from the fittings of the model, were in line with the destruction-removal efficiencies of BPA in all the photocatalytic experiments.     

TiO2纳米管阵列覆盖Si薄膜光催化还原CO2性能的研究

本工作采用CVD法在阳极氧化TiO2纳米管阵列膜表面沉积一层非晶Si膜,通过退火后得到晶化了的Si膜/TiO2纳米管阵列的复合结构,并初步就其光催化还原CO2制备碳氢化合物的活性进行研究。拉曼光谱(Raman)、X射线衍射(XRD)、场发射扫描电镜(FE-SEM)、高分辨透射电子显微镜(TEM)等微结构表征结果表明所制备的TiO2纳米管阵列的厚度为270 nm左右,管直径约为70 nm,管壁厚度约为16 nm。覆盖的Si膜已晶化,其厚度约为300 nm。通过高效液相色谱(HPLC)及总有机碳(TOC)来检测光催化还原液相产物中的甲酸及总有机碳含量,发现负载Si膜后的TiO2纳米管阵列光催化性能有所提高,在装有400cut滤光片氙灯照射2 h下TOC含量从21.2 mg.L-1增长到29.5 mg.L-1,表明Si与TiO2的复合可有效的提高光催化还原CO2的活性,这可能与该异质结结构可增加对光的吸收并且可降低光生空穴-电子对复合有关。光催化循环实验表明所制得的催化剂在循环5次后仍可保持91.6%的催化活性。     

The Preparation and Characterization of La Doped TiO2 Nanotubes and Their Photocatalytic Activity

La-doped TiO₂ nanotubes (La/TiO₂ NTs) were prepared by the combination of sol-gel process with hydrothermal treatment. The prepared samples were characterized by using transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectra, and ultraviolet-visible spectra. The photocatalytic performance of La/TiO₂ NTs was studied by testing the degradation rate of methyl orange under ultraviolet (UV) irradiation. The results indicated La/TiO₂ NTs calcined at 300°C consisted of anatase as the unique phase. The absorption spectra of the La/TiO₂ NTs showed a stronger absorption in the UV range and a slight red shift in the band gap transition than that of pure TiO₂ nanotubes. The photocatalytic performance of TiO₂ NTs could be improved by the doping of lanthanum ions, which is ascribed to several beneficial effects the formation of Ti-O-La bond and charge imbalance, existing of oxygen defects and Ti³⁺ species, stronger absorption in the UV range and a slight red shift in the band gap transition, as well as higher equilibrium dark adsorption of methyl orange. 0.75 wt% La/TiO₂ NTs had the best catalytic activity.     

过硫酸盐激活协同可见光催化降解四环素的机理和降解路径

为了提升微污染水体中抗生素的降解效率,利用过硫酸钠(PDS)激活协同手性介孔TiO₂可见光催化(PDS/vis-TiO₂)对四环素(TC)进行降解。详细对比研究了以手性TiO₂作为催化剂的PDS激活(PDS/TiO₂)、可见光催化(vis-TiO₂)和PDS/vis-TiO₂三种体系中,降解污染物的活性物种和污染物降解路径等的差异。结果表明,不对称的螺旋堆积结构在手性介孔TiO₂中引入了丰富的Ti³⁺,不仅提升了其可见光响应,同时能够激活PDS生成自由基。PDS/vis-TiO₂体系中光生空穴h⁺和·OH等多种自由基可以同时参与TC的降解,5 h内其对TC去除率可达到95%以上,远超PDS/TiO₂体系(TC去除率为48.9%)和vis-TiO₂体系(TC去除率为71.1%)。PDS加入到光催化体系中,会受到光生电子的激活而产生自由基,从而消耗光生电子,提升光生空穴和电子的分离率,达到协同增强污染物的降解能力。另外PDS激活后产生自由基也会大大增加体系对TC的降解性能。密度泛函理论计算和中间产物分析结果表明,TC在PDS/vis-TiO₂体系中的降解路径包含了光生空穴h⁺攻击TC的降解路径,同时也包括自由基攻击TC的降解路径。     

Photo catalytic oxidation of TNT using TiO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> nano-composite aerogel catalyst prepared using sol–gel process

The degradation of nitro aromatics like trinitrotoluene (TNT) released in the waste water from explosive process plants is the serious problem due to toxic and explosive nature of TNT. The poor response of TNT to biodegradation enhanced the gravity of the problem. We have demonstrated that high specific surface area TiO₂–SiO₂ nano-composite aerogel is promising photo catalyst in successful treating of TNT contaminated aqueous solution. The TiO₂–SiO₂ composite aerogel with nominal content of 20 and 50% TiO₂, used as catalyst, were prepared by co-precursor sol–gel method using titanium isopropaxide and tetramethylorthosilicate as source of titania and silica, respectively. The XRD studies confirmed formation of anatase phase of crystalline TiO₂ with nano sized crystallites. The TiO₂–SiO₂ aerogel showed specific surface area of 1,107 and 485 m²/g for the aerogels containing 20 and 50% TiO₂, respectively. The 100 ppm TNT solution was treated, in 700 ml capacity reaction vessel, using H₂O₂ oxidizer and TiO₂–SiO₂ aerogel catalyst in presence of UV light (8 W UV lamp). Using TiO₂–SiO₂ (50/50) aerogel with surface area of 485 m²/g, we succeeded to reduce the TOC to 1 ppm within 3.5 h where as using TiO₂/SiO₂ (20/80) aerogel with surface area of 1,107 m²/g, the TOC was reduced to about only 7 ppm in the same time. It revealed that the combination of high TiO₂ content and high specific surface area is an important factor to achieve effective and faster degradation of TNT for complete mineralization.     

GO/TiO2-g-C3N4纳米复合材料的制备及可见光催化性能

以水热法制备的20% g-C₃N₄/TiO₂（20%为质量分数）为基,将其与不同质量分数的氧化石墨烯（GO）复合制备出可见光催化性能优良的GO/TiO₂-g-C₃N₄三元复合材料。利用X射线衍射（XRD）、扫描电子显微镜（SEM）、X射线光电子能谱（XPS）、紫外-可见漫反射光谱（UV-Vis DRS）、光致荧光光谱（PL）、瞬态光电流响应等分析测试手段对样品的结构、形貌和光电性能进行表征。研究了不同质量分数GO的加入对GO/TiO₂-g-C₃N₄在可见光下降解亚甲基蓝（MB）溶液的影响。结果表明： g-C₃N₄/TiO₂与GO复合后,锐钛矿相TiO₂颗粒形成小团簇附着在g-C₃N₄和GO片层表面,且当GO含量为15%时,TiO₂形成的团簇最小,对可见光的吸收最多且光生电子-空穴对的复合率最低。可见光照射下,15% GO/TiO₂-g-C₃N₄复合材料对MB的降解率在3 h内可达98.4%,且其降解速率常数（0.022 4 min^-1）分别是纯TiO₂（0.001 5 min^-1）和g-C₃N₄/TiO₂（0.002 5 min^-1）的15倍和9倍。     

载钛羟基磷灰石光催化降解内分泌干扰物双酚A

对载钛羟基磷灰石（TiHAP）进行了透射电镜、X射线衍射、紫外-可见光谱和Zeta电位表征,并应用液相色谱-质谱技术对比了TiHAP和P25 TiO₂对环境内分泌干扰物双酚A（BPA）的吸附和光催化降解性能,探讨了富里酸和Fe³⁺对TiHAP薄膜光催化性能的影响。结果表明,TiHAP和TiO₂粉体对BPA的吸附符合Langmuir吸附等温方程,且前者吸附性能更大。TiHAP薄膜光催化降解BPA的性能优于TiO₂薄膜;富里酸和Fe³⁺对TiHAP和TiO₂薄膜光催化性能的影响趋势不同,从能带结构、电子转移和吸光性等角度分析了性能不同的原因。本结果可以为应用TiHAP降解环境内分泌干扰物提供依据。