异烟肼乳酸-乙醇酸共聚物磁性微球的制备和体外释放

采用化学共沉法制备磁性Fe3O4纳米粒,再采用W/O/W复乳-溶剂挥干法制备异烟肼乳酸-乙醇酸共聚物[Poly(lactide-co-glycolide),PLGA]磁性微球(INH-PLGA-MMS);电镜考察INH-PLGA-MMS形态、激光粒径分析仪考察粒径分布、磁场计测定磁感应强度、高效液相色谱法(HPLC)测定包封率、载药量及其释放度。结果表明,W/O/W复乳-溶剂挥干法制得的INH-PLGA-MMS外观圆整、表面光滑,平均粒径为3.02μm,磁感应强度为11.403emu/g,平均包封率为62.52%,平均载药量为9.21%,体外释放表明该制剂具有明显的缓释功能,外加振荡磁场可以增加磁性微球中药物的释放。     

Au/Al2O3催化剂的UV-Vis谱研究

研究了十六烷基三甲基溴化铵 (CTAB) /正己醇 /水体系的W/O微乳体系中 ,几种主要实验参数对用NaBH4还原氯金酸溶液制得的金纳米粒子大小的影响。实验结果表明 :微乳体系中水与表面活性剂的摩尔比rw 在所研究的范围内对金粒子大小影响不大 ,而氯金酸溶液的浓度对金粒子大小影响较大。通过优化制备条件 ,用两种不同的方法制备了Au/Al2 O3 催化剂 ,并用紫外 可见光谱、透射电镜 (TEM)和X射线衍射(XRD)对其进行表征 ,初步考察了不同制备方法对催化剂中活性组分Au粒大小的影响     

纳米α-Fe/PS复合材料的制备及其热力学性能研究

 采用油包水(W/O)的微乳液体系制备了粒度为20~100 nm的α Fe。对纳米Fe进行表面有机改性后分散到苯乙烯（St）单体中，得到分散均匀的Fe/St分散体系，用本体聚合的方法制备了纳米Fe/PS复合材料。利用XRD，TEM，FTIR，SEM及TG DSC分别研究了所得纳米Fe的性能、复合材料的结构、纳米Fe在PS中的分散情况以及掺杂量对纳米Fe/PS复合材料的热力学行为的影响。研究结果表明：增加纳米α-Fe的掺杂量能提高PS的降解率，降低降解温度，增大热分解的焓变。     

C60/SiO2/Chitosan复合纳米粒子的合成及其光致化学发光分析应用

采用反相微乳液纳米粒子合成方法制备了具有光致化学发光活性的C60/SiO2/Chitosan复合纳米粒子.光致化学发光研究显示该复合纳米粒子与鲁米诺的混合溶液能被波长为400 nm的光信号诱导产生鲁米诺的光致化学发光信号,且该发光信号可以被复合纳米粒子表面所吸附的DNA所抑制,据此发现,建立了检测小牛胸腺DNA的光致化学发光新方法.在最佳的实验条件下,光致化学发光信号强度与DNA浓度在1.0×10-9-1.0×10-8mol/L 之间表现出了良好线性.     

反相微乳液模板原位聚合制备纳米氯化银/聚甲基丙烯酸甲酯及其结构表征

用甲基丙烯酸甲酯 (MMA)作油相 ,反相胶束微乳液作为模板 ,制备了纳米氯化银 (AgCl)粒子 ,再进行原位聚合制备了纳米氯化银 /聚甲基丙烯酸甲酯 (AgCl/PMMA)复合材料 .透射电镜 (TEM )分析表明 ,纳米AgCl的尺寸为 2 0～ 80nm .扫描电镜 (SEM )测试表明纳米AgCl粒子均匀地存在于PMMA基材中 .红外分析证明 ,胶束中水和表面活性剂AOT的羰基在MMA聚合后微观环境发生变化 ,纳米粒子同聚合物之间有吸附行为 .动态力学 (DMTA)分析复合材料 ,发现纳米AgCl粒子与聚合物之间存在强烈相互作用 ,形成了中间相层 (interphaselayer) ,改变了聚合物的动态力学性能 .     

Co3O4 纳米棒的溶剂热合成及形成机理分析

以Co(NO3) 2 ·6H2 O为主要原料 ,H2 O2 为氧化剂 ,在油酸和正十二烷烃的混合溶液中 ,利用溶剂热技术于 160℃反应 10h ,成功地合成了Co3O4 纳米棒 .用X射线粉末衍射 (XRD)、透射电子显微镜 (TEM)和振动样品磁强计 (VSM)等手段对产物进行了表征 ,并对产物的形成机理进行了初步分析 .结果表明 ,产物为立方型Co3O4 纯相 ,优化实验条件可得到棒状Co3O4 ,其平均尺寸约为 2 5× 10 0nm .Co3O4 纳米棒的形成与微乳液的棒状结构有关 ,棒状结构的胶束是形成这种纳米棒的模板 .在室温下 ,产物的矫顽力 (Hc)为 3 5 3Oe ,剩余磁化率 (Mr)为 0 .4emu/g .     

SiO2包覆铕（Ⅲ）配合物的荧光纳米粒子合成与性质

以前驱物pAB-DTPAA-APTEOS、正硅酸乙酯(TEOS)和三氯化铕(EuCl3)等为原料,采用油包水(W/O)的反相微乳液法,在正硅酸乙酯(TEOS)和3-氨丙基三乙氧基硅烷(APTEOS)的共同水解下,制备出新型的SiO2包覆铕配合物荧光纳米粒子Eu-pAB-DTPAA-AP-SiO2。运用TEM、IR、UV-Vis、荧光光谱等技术对荧光纳米粒子进行了表征。TEM结果表明:包覆体呈球形,分散均匀,平均粒径为40nm。纳米粒子与配体、前驱物的紫外吸收谱相比较,峰位发生了一定的红移,表明通过反相微乳液法得到的固体粉末与EuCl3反应后,已经生成配合物Eu-pAB-DTPAA-AP-SiO2。红外光谱研究表明,在801cm-1出现νSi—C的伸缩振动峰,471cm-1处出现νEu—O的伸缩振动峰。由此证实Eu-pAB-DTPAA-AP-SiO2配合物的存在。荧光光谱分析表明,纳米粒子Eu-pAB-DTPAA-AP-SiO2表现出较好的荧光性能,位于592,615,689nm的发射峰分别归属于Eu3 离子的5D0→7F1、5D0→7F2和5D0→7F4跃迁,其中最强峰615nm属于Eu3 的特征跃迁发射。作为一种新型的荧光试剂,该纳米粒子具有粒径小,亲水性强,荧光强度大,且表面的氨基能方便地与生物分子偶联,故可作为优良的时间分辨荧光标记物用于各种高灵敏生物检测技术中。     

聚-α-甲基苯乙烯空心微球制备过程中的缺损研究

基于二次乳化技术产生W1/O/W2双重乳液,采用乳液微封装技术制备聚--甲基苯乙烯(PAMS)空心微球,研究了部分工艺参数对PAMS微球缺损形态和比例的影响。实验结果表明:薄壁微球的低强度导致了微球表面缺损。当微球壁厚一定时,有3个因素影响缺损微球比例:W2相中聚乙烯醇质量分数、CaCl2质量分数和O/W2的相比,当它们分别为1.0%,1.5%,0.01时,薄壁(2 m)微球的缺损比例低于40%,球壳内也无气泡存在。     

微流控法二乙烯基苯乳液粒子成型机理研究

采用相界面跟踪(V()F)数值模拟方法,研究了轴流型微流控芯片中流速比、界面张力、粘度等对乳液粒子粒径的影响。模拟结果表明:乳液粒子粒径与流速比的对数存在线性关系,在一定范围内,当流速比增大时,粒径变小;当界面张力小于0.025 N/m时,乳液粒径随界面张力增大而增加,当界面张力超过0.03N/m时,乳液粒径变化趋于平缓;分散相粘度对乳液粒径的影响甚微。以聚乙烯醇(PVA)水溶液为连续相,二乙烯基苯(DVB)溶液为分散相,采用自制的聚二甲基硅氧烷(PDMS)轴流型微流控芯进行了DVB乳液粒子成型实验研究,获得了0.5~3.0 mm的DVB乳液粒子。     

Fe3O4@SiO2@An磁性纳米荧光粒子的制备及对锌离子的识别

通过微乳法一步合成了SiO2包覆Fe3O4的磁性纳米颗粒(MNP)并通过硅烷偶联剂将表面氨基化,进一步通过化学成键将荧光分子蒽修饰到氨基化的纳米粒子表面,制得Fe3O4@SiO2@An磁性纳米荧光粒子.采用XRD、TEM、FTIR等实验方法对该粒子进行一系列的表征,其直径约为9nm,常温时具有超顺磁性,通过外加磁场,能够使粒子从溶液中简单有效地分离.该粒子在溶剂中具有较好的分散性,荧光实验表明,对锌离子具有较好的选择性,在锌离子存在下基于光诱导电子转移( PET,PhotoinducedElectron Transfer)机理,粒子荧光强度显著增强,检出限为2.8571×10-5mol/L.     

Polystyrene/Fe3O4 magnetic emulsion and nanocomposite prepared by ultrasonically initiated miniemulsion polymerization

Ultrasonically initiated miniemulsion polymerization of styrene in the presence of Fe3O4 nanoparticles was successfully employed to prepare polystyrene (PS)/Fe3O4 magnetic emulsion and nanocomposite. The effects of Fe3O4 nanoparticles on miniemulsion polymerization process, the structure, morphology and properties of PS/Fe3O4 nanocomposite were investigated. The increase in the amount of Fe3O4 nanoparticles drastically increases the polymerization rate due to that Fe3O4 nanoparticles increase the number of radicals and the cavitation bubbles. Polymerization kinetics of ultrasonically initiated miniemulsion polymerization is similar to that of conventional miniemulsion polymerization. PS/Fe3O4 magnetic emulsion consists of two types of particles: latex particles with Fe3O4 nanoparticles and latex particles with no encapsulated Fe3O4 nanoparticles. Fe3O4 nanoparticles lower the molecular weight of PS and broaden the molecular weight and particle size distribution. Thermal stability of PS/Fe3O4 nanocomposite increases with the increase in Fe3O4 content. PS/Fe3O4 emulsion and nanocomposite exhibit magnetic properties. PS/Fe3O4 magnetic particles can be separated from the magnetic emulsion by an external magnetic field and redispersed into the emulsion with agitation.     

磁性聚苯胺纳米微球的合成与表征

报道了具有核壳结构的Fe3 O4 聚苯胺磁性纳米微球的合成方法和表征结果 .微球同时具有导电性和磁性能 .在优化的实验条件下 ,可得到饱和磁化强度Ms 为 5 5 .4emu/g ,矫顽力Hc 为 6 2Oe的磁性微球 .微球的导电性随着微球中Fe含量的增加而下降 .微球的磁性能则随着Fe含量的增加而增大 .Fe3 O4 磁流体的粒径和磁性聚苯胺微球的粒径均在纳米量级 .纳米Fe3 O4 粒子能够提高复合物的热性能 .实验表明 ,磁流体和聚苯胺之间可能存在着一定的相互作用 ,但这种相互作用较为复杂 ,难于研究 .     

原位聚合纳米Ni/聚苯乙烯复合材料及其热力学性能

 磁性聚苯乙烯(PS)材料有利于实现惯性约束聚变靶丸在辐射场中的无接触支撑。采用液相还原法制备了粒度为75~200 nm的Ni球形粒子,用原位聚合的方法制备了纳米Ni/PS复合材料。利用X射线衍射仪、傅氏转换红外线光谱分析仪、扫描电子显微镜及热重差示扫描量热仪分别研究了所得纳米Ni的特性、复合材料的结构及掺杂量对纳米Ni/PS复合材料的热力学行为的影响。研究结果表明：纳米Ni的掺杂能提高玻璃转变温度;纳米Ni的掺杂可以增大PS热分解焓变,在掺杂质量分数为1%~2%之间焓变达到最大;纳米Ni的掺杂降低了纳米Ni/PS复合材料热分解的比热容。     

High quality and tuneable silica shell–magnetic core nanoparticles

Obtaining small (<50 nm), monodispersed, well-separated, single iron oxide core–silica (SiO₂) shell nanoparticles for biomedical applications is still a challenge. Preferably, they are synthesised by inverse microemulsion method. However, substantial amount of aggregated and multicore core–shell nanoparticles is the undesired outcome of the method. In this study, we report on the production of less than 50 nm overall size, monodispersed, free of necking, single core iron oxide–SiO₂ shell nanoparticles with tuneable shell thickness by a carefully optimized inverse microemulsion method. The high degree of control over the process is achieved by understanding the mechanism of core–shell nanoparticles formation. By varying the reaction time and precursor concentration, the thickness of silica layer on the core nanoparticles can be finely adjusted from 5 to 13 nm. Residual reactions during the workup were inhibited by a combination of pH control with shock freezing and ultracentrifuging. These high-quality tuneable core–shell nanocomposite particles exhibit superparamagnetic character and sufficiently high magnetization with great potential for biomedical applications (e.g. MRI, cell separation and magnetically driven drug delivery systems) either as-prepared or by additional surface modification for improved biocompatibility.     

Physical and electrochemical characterizations of Ni-SiO2 nanocomposite coatings

Advances in materials performance often require the development of composite system. In the present investigation, SiO₂-reinforced nickel composite coatings were deposited on a mild steel substrate using direct current electrodeposition process employing a nickel acetate bath. Surface morphology, composition, microstructure and crystal orientation of the Ni and Ni-SiO₂ nanocomposite coatings were investigated by scanning electron microscope, energy dispersive X-ray spectroscopy and X-ray diffraction analysis, respectively. The effect of incorporation of SiO₂ particles in the Ni nanocomposite coating on the microhardness and corrosion behaviour has been evaluated. Smooth composite deposits containing well-distributed silicon oxide particles were obtained. The preferred growth process of the nickel matrix in crystallographic directions <111>, <200> and <220> is strongly influenced by SiO₂ nanoparticles. The average crystallite size was calculated by using X-ray diffraction analysis and it was ~23 nm for electrodeposited nickel and ~21 nm for Ni-SiO₂ nanocomposite coatings. The crystallite structure was fcc for electrodeposited nickel and Ni-SiO₂ nanocomposite coatings. The incorporation of SiO₂ particles into the Ni matrices was found to improve corrosion resistance of pure Ni coatings. The corrosion potential (E _corr) in the case of Ni-SiO₂ nanocomposite coatings had shown a negative shift, confirming the cathodic protective nature of the coating. The Ni-SiO₂ composite coatings have exhibited significantly improved microhardness (615 HV) compared to pure nickel coatings (265 HV)     

Sono-synthesis of core-shell nanocrystal (CdS/TiO2) without surfactant

A core-shell nanocomposite (CdS/TiO(2)) was synthesized at relatively low temperature (70°C) with small particle sizes (~11 nm). First, CdS nanoparticles were prepared by a combination of ultrasound and new micro-emulsion (O/W) without surfactant. Then the synthesized CdS was easily combined with TiO(2) under sonication. The formation of uniform surface layer of TiO(2) with depths of 0.75-1.1 nm on the CdS led to an increase of particle size. Ultrasonic irradiation can control the hydrolysis and condensation of titanium tetra-isopropoxide (TTIP) and the formation of TiO(2) shell around the CdS core. This technique avoids some of the problems that exist in conventional microemulsion synthesis such as the presence of different additives and calcinations. It was found that nanocomposite particles extend the optical absorption spectrum into the visible region in comparison with pure TiO(2) and pure CdS. In addition, a larger depth of TiO(2) led to a red-shift of the absorption band in nanocomposite. The characterization of nanocomposites has been studied by HRTEM, TEM, XRD, EDAX, BET and, UV-vis.     

Synthesis of Ca-P nanoparticles and fabrication of Ca-P/PHBV nanocomposite microspheres for bone tissue engineering applications

As the first step in producing totally bioresorbable osteoconductive composite scaffolds for bone tissue engineering using the selective laser sintering technology, bioresorbable nanoparticles of calcium phosphate (Ca-P) similar in composition to β-tricalcium phosphate were synthesized and Ca-P nanoparticle filled poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) microspheres were fabricated. The pH of the chemical reaction for Ca-P particle synthesis was found to have significant effects on the morphology and chemical composition of Ca-P precipitated. Ca-P particles produced at the pH of 10.0-11.0 were amorphous, had a Ca:P molar ratio of about 1.5, were spherical in shape and had sizes in the range of 10-30 nm. The Ca-P particles were used to form Ca-P nanocomposite microspheres through a solid-in-oil-in-water (S/O/W) emulsion solvent evaporation process. Ca-P nanoparticles were mostly encapsulated inside the microspheres and some Ca-P nanoparticles were superficially embedded on the microspheres. The Ca-P/PHBV microspheres had an average diameter of about 48 μm which is suitable for selective laser sintering for constructing osteoconductive composite scaffolds.     

Tb(Asprin)_3Phen/SiO_2壳/核型纳米材料的合成和光学性质

利用W/O微乳液方法合成了直径为40 nm的具有类壳/核结构的Tb(Asprin)3Phen/SiO2纳米球.透射电子显微镜(TEM)证实了该纳米球具有尺寸均一,分散性好的特点.另外,通过TEOS与APS在微乳液中同时水解,在材料的表面引入了大量的氨基,为材料的生物应用提供了有利的条件.红外光谱(FT-IR)和光致发光光谱分析也显示了这种材料在生物领域中有着潜在的应用前景.     

Zinc oxide nanoparticles reinforced conducting poly(aniline-co-p-phenylenediamine) nanocomposite

Zinc oxide (ZnO) nanoparticles were synthesized by thermal decomposition method and formation of composite with conducting copolymer via in situ chemical oxidative polymerization. Transmission electron microscopy showed that the nanoparticles with an average diameter of 15–25?nm were dispersed in the copolymer matrix. The comonomer molecules were adsorbed on the surface of ZnO particles and then polymerized to form core–shell nanocomposite. The obtained nanocomposite showed a significant improvement in the thermal behavior as indicated by thermogravimetric analysis. The nanocomposite was also confirmed by Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, and X-ray diffraction. Room temperature conductivity of nanocomposite was higher than the value obtained for the pure copolymer. Photocatalytic activity of the nanocomposite was evaluated by measuring the degradation of methylene blue dye under UV irradiation.