排序方式: 共有56条查询结果,搜索用时 78 毫秒
1.
采用非共价复合方法,设计并合成了具有星形结构的聚甲基丙烯酸甲酯/星形聚乙二醇半互穿聚合物网络(PMMA/SPEG)和聚甲基丙烯酸甲酯/线性聚乙二醇半互穿聚合物网络(PMMA/LPEG).研究了PEG分子量对PMMA/SPEG和PMMA/LPEG的热性能、机械性能、动态机械性能和形状记忆性能的影响.结果表明,与PMMA/LPEG相比,星形结构的嵌入显著提高了PMMA/SPEG复合物的机械性能、形状回复率和回复速度.采用Edwards管道模型理论对其形状记忆效应的分子机理进行了阐释,利用材料的应力松弛特性对机理分析进行了验证. 相似文献
2.
3.
Self-assembly behavior of copolymers with super segregated structure containing fluorinated segments
Copolymers with super segregated structure of hydrophilic methoxy poly(ethylene glycol) (mPEG) and fluorophilic poly(1H,1H,2H,2H-perfluorodecyl acrylate) (PFA) were prepared. And just because of this super segregated structure which was resulted from the extremely strong incompatibility between the two blocks, several interesting self- assembly behaviors of the copolymers were displayed and studied under different conditions. Transmission electron microscope (TEM) showed that with the increase of PFA in the polymerization system, the incompatibility in this super segregated structure became stronger, and the self-assembly behavior changed from ball-like or rod-like to vesicles, and finally collapsed to sheet-like. The self-assembly behavior changed likewise when the initial concentration increased. And the interesting formation of these barrel-like and spindle-like vesicles was finally studied with different cooling speeds. It's finally found that with this super segregation structure, these new self-assembly morphology might be formed due to the extremely strong incompatibility between mPEG and PFA segments. 相似文献
4.
采用聚氨酯泡沫为模板,依次修饰羧甲基纤维素钠(CMC)、Fe~(3+),在惰性气氛中高温热处理反应,制备多孔结构的磁性吸油材料.用光学显微镜、扫描电子显微镜、红外吸收光谱、X-射线衍射、接触角等技术对材料进行表征.详细考察了加热反应温度、CMC浓度和Fe~(3+)浓度对材料吸油性能和磁性的影响规律.实验表明,当加热反应温度选择230°C,CMC浓度为0.3 wt%,FeCl_3浓度为0.1 mol/L时,材料吸油性能最佳,对正己烷、二甲苯、环己烷、甲苯、乙酸乙酯、氯仿、机油、原油等有机溶剂和油类分子的吸附容量为10倍左右.磁性多孔材料具有明显的亲油、疏水特性,水的接触角达115.9°,同时材料密度只有0.036g/cm~3,能够漂浮于水面,实现对水面有机溶剂的快速吸附.吸附后的材料在外界磁场控制下,能够通过磁分离方式从水面快速分离.该材料具有良好的循环利用性能,可重复使用20次以上,吸油性能仍然保持良好. 相似文献
5.
6.
7.
8.
以4-叔丁基苯乙烯(t BS)和甲基丙烯酸甲酯(MMA)为单体,二乙烯基苯(DVB)为交联剂,与双键修饰的Fe3O4纳米粒子共聚,制备了一系列基于t BS和MMA的磁性高分子吸油树脂.用红外光谱(FTIR)、X-射线衍射(XRD)、光学显微镜(OM)、扫描电子显微镜(SEM)、接触角(CA)和比表面积测试等技术对样品进行了表征.详细考察了两单体配比、交联剂用量对树脂的吸附容量、吸附速率的影响规律.实验发现,当两单体用量分别为2 m L,交联剂为0.5 m L时,磁性吸油树脂的吸油性能达到最好. 相似文献
9.
10.