结合分子动力学验证PBS基共聚物和淀粉复合材料之间的相互作用

将聚乙二醇200(PEG200)或聚乙二醇400(PEG400)作为第四种单体分别和丁二酸(SA)、丁二醇(BDO)、乙二醇(EG)熔融共聚得到不同醚链长度的PEG200-PBES、PEG400-PBES共聚酯,再与改性的热塑性淀粉(TPS)共混,采用溶液混合方法,制备出固体复合材料,并且研究了引入不同醚链长度对复合材料各种性能的影响;结合分子动力学(MD)模拟分析了不同醚链长度(PEG-PBES)/TPS复合体系分子之间的相互作用.研究结果表明,随着醚链的增长,复合材料的相容性显著增加,(PEG400-PBES)/TPS复合体系的χ参数和Emix值更接近于0,内聚能密度及溶度参数值大于(PEG200-PBES)/TPS和PBS/TPS复合体系的相应值,说明PEG400-PBES与TPS有更好的相容性.同时,随着醚链的增长,复合材料拉伸强度由原来的1.86 MPa提高到8.84 MPa,断裂伸长率由25.54%提高到74.75%,热失重50%时的温度由281.68℃提高到310.53℃.     

多巴胺基多重相互作用协同构筑抗污-杀菌双重功能涂层

在弱碱性和空气条件下, 以多巴胺(DA)为多重相互作用模型分子, 调控羧甲基壳聚糖(CMC)和侧基含 伯氨基(—NH₂)的磷酰胆碱基聚合物(PMA)与DA之间的相互作用, 采用一步共沉积法构筑表面富含磷酰胆碱两性离子基团和CMC杀菌性聚合物的双重抗菌涂层. 研究发现, DA分子的万能黏附特性有利于诱导CMC 和PMA在基材表面发生共沉积, 增强涂层中各组分及其与基材之间的界面结合力, 所得涂层在体积分数为75%的乙醇水溶液中超声2 h后, 表面水接触角数值几乎保持不变, 稳定性良好; 而CMC和PMA聚合物链中的—NH₂侧基与DA及其衍生物之间发生氢键、 席夫碱和/或迈克尔加成反应等多重相互作用, 协同改善DA分子氧化-自聚行为和沉积过程, 获得形貌较为均一的涂层表面. 所得表面同时含有两性离子基团和CMC聚合物链, 兼具良好抗生物污染和杀菌活性, 能够有效抑制细菌生物膜的形成.     

疏水改性聚丙烯酰胺溶液的分子模拟

设计了几种不同的非离子型改性聚丙烯酰胺(HM-PAM)和阴离子型改性聚丙烯酰胺(HM-HPAM). 通过分子动力学模拟(MD)方法研究了在聚合物链上加入不同疏水改性单体对提高聚丙烯酰胺耐盐性的影响, 考察了盐浓度对疏水改性聚丙烯酰胺的回旋半径(R_g)、 特性黏数([η])、 径向分布函数(RDF)和均方位移(MSD)的影响以及聚合物的微观结构与特性黏数之间的关系. 研究结果表明, 引入疏水改性单体后, 改性聚丙烯酰胺具有较好的耐盐性. 通过研究非键作用与氢键相互作用可知, 体系中溶质和溶剂间的相互作用及氢键作用越弱, 溶液的特性黏数越大. O-H原子对的RDF结果表明, 聚合物链的伸展与聚合物链及官能团间的相互作用有关. 当RDF峰较弱时, 聚合物链与水的作用越弱, 越有利于聚合物链保持舒展状态, 溶液的特性黏数也就越大. 另外, 从聚合物链的MSD曲线发现, 聚合链的移动性与特性黏数呈负相关.     

聚丁二酸丁二酯/纳米二氧化硅共混体系的结晶和动态力学性能研究

用溶液共混法制备了聚丁二酸丁二酯(PBS)/纳米二氧化硅(nano-SiO2)复合材料,并通过DSC、XRD、TEM和DMTA对其结晶、微观结构和动态力学性能进行了研究.DSC与XRD结果表明,在PBS中加入纳米SiO2,提高了PBS的结晶温度,并随着nano-SiO2含量的增加呈正相相关性,从纯PBS的67.7℃提高到含5%nano-SiO2时的73.3℃;在空气淬火条件下,提高了复合材料中PBS的结晶度,在nano-SiO2含量为2%时达到42.4%;TEM照片表明SiO2与基体PBS的界面模糊,表明二者之间具有一定的相互作用;这种相互作用和复合材料结晶性能的变化使PBS/nano-SiO2复合材料的储能模量和损耗因子均高于纯PBS.上述结果表明在PBS中添加适量的nano-SiO2,能显著提高PBS的结晶和动态力学性能.     

电荷密度和疏水性对疏水改性聚丙烯酰胺与牛血清蛋白相互作用的影响

对比研究了牛血清蛋白(BSA)与部分水解的未改性聚丙烯酰胺(PAM-AA)、疏水改性聚丙烯酰胺(PAM-C12)和含有丙烯酸基团的疏水改性聚丙烯酰胺(PAM-C12-AA)之间的相互作用.等温滴定量热实验结果表明,除PAM-C12外,其他聚合物与BSA的结合焓均为放热,随AA含量的增加,放热焓值增大.与PAM和PAM-C12相比,PAM-C12-AA能够诱导BSA二级结构和微环境的明显变化,表明疏水性和电荷密度均对聚合物与BSA相互作用有重要影响.另外,不同浓度的PAM-C12-AA与BSA的作用方式不同,当聚合物的浓度略高于临界胶束浓度(CMC)时,由于聚合物的量较少,BSA分子改变其构型从而最大程度地与聚合物结合;当聚合物的浓度远高于CMC时,更多的聚合物链结合到BSA分子的正电荷"patch"上,PAM-C12-AA与BSA的紧密聚集体利于BSA二级结构的稳定.     

己二酸二酯原位功能化SiO2稳定Pickering乳液的相反转研究

研究了原位改性SiO₂稳定的己二酸二酯-水体系的乳液相反转特性, 探究了不同己二酸二酯分子对SiO₂的功能化改性能力. 研究发现, 己二酸二酯的烷基链长对乳化行为有重要影响, 长分子链二酯倾向于形成O/W乳液, 而短分子链二酯则倾向于形成W/O型乳液. 结果表明, 短分子链的己二酸二酯对SiO₂粒子的原位功能化改性效果更好, 其原因在于短分子链的己二酸二酯空间位阻较小, 酯基与Si—OH形成氢键能力较强. 改性SiO₂的红外光谱证明了SiO₂表面不同己二酸二酯的数量变化. 碱性条件下乳液稳定特性再次证实了所提出的机理.     

对苯二胺功能化还原氧化石墨烯的结构和官能团变化

采用一步水热回流法,选取对苯二胺(PPD)对氧化石墨烯(GO)进行还原与改性处理,制备了功能化还原氧化石墨烯(GOP-X).采用傅里叶变换红外光谱(FTIR)、X射线光电子能谱(XPS)及X射线衍射(XRD)等研究了PPD与GO的反应作用类型及结构变化.结果表明,随着PPD与GO质量比的增加,GOP-X层间距(d值)先增大后减小,GOP-X共轭结构逐渐恢复,与溶剂分子作用时,层间距增幅呈减小趋势,并最终趋于恒定.PPD单体与GO反应时存在3种键合类型:(1)GO含氧官能团和PPD分子之间的氢键作用(C—OH…H2N—X);(2)质子化PPD与弱酸性GO带负电位置之间的离子键作用(—COO-H3+N—X);(3)PPD中氨基(NH2)与GO含氧官能团之间形成的共价键作用.与GO中羧基(COOH)的酰胺化反应将先于与环氧基(C—O—C)的亲核取代反应.提出了相应的作用机理.     

离子液体在多水相液液平衡体系中的作用

通过用短链离子液体(1-乙基-3-甲基咪唑溴盐[C2mim]Br、1-丁基-3-甲基咪唑溴盐[C4mim]Br)部分或全部取代SDS/DTAB/PEG/NaBr/H2O多水相体系中的无机盐NaBr,用长链离子液体十二烷基-3-甲基咪唑溴盐[C12mim]Br部分取代体系中阳离子表面活性剂DTAB,系统研究了离子液体在分相体系中的作用及其对分相体系性质的影响.研究表明,SDS/DTAB/PEG/NaBr/H2O混合体系形成的四水相体系可以看作"聚合物双水相"与"表面活性剂双水相"共存的结果.短链离子液体([C2mim]Br、[C4mim]Br)较强的亲水性能赋予其较强的盐析能力,在混合体系中表现出明显的盐效应,保证了四水相体系中"聚合物双水相"的存在.短链离子液体与聚合物之间的相互作用及其对表面活性剂之间相互作用的影响均不可忽略.对混合体系的相行为,共存多相的性质有重要的影响.而长链离子液体[C12mim]Br主要通过自身的疏水作用影响"表面活性剂双水相"的性质,充当表面活性剂的角色.然而,[C12mim]Br与DTAB分子结构上的差异,导致表面活性剂分子在"表面活性剂双水相"的两相重新分配,影响了对应两相的体积及萃取能力.可见,通过调节离子液体的烷基链长、混合体系中的含量等可获得具有特定性质的多水相体系.     

HDI作为扩链剂合成含PLLA和PBS链段的聚酯氨酯

以数均分子量为6350g/mol端羟基聚L-乳酸(PLLA-OH)与10500g/mol端羟基聚丁二酸丁二酯(PBS-OH)为预聚物,六亚甲基二异氰酸酯(HDI)为扩链剂,通过熔融反应制备了分子量高达30×104g/mol的可完全生物降解聚酯氨酯(PEU).研究了异氰酸根(NCO)与羟基比例对扩链反应的影响.结果表明,当[NCO]/[OH]=1∶1时,扩链效果最好,PEU分子量最大;PEU分子量随着预聚物中PBS含量增大而提高.通过核磁共振谱(1H-NMR)确定了PEU的结构与组成,并对聚酯氨酯进行了凝胶渗透色谱(GPC)、差示扫描量热(DSC)、热重分析(TGA)以及拉伸性能测试.DSC结果显示,扩链后PEU的结晶主要由PBS链段产生,而PLLA链段几乎不结晶;TGA结果表明,PEU的热降解分两步进行,第一步为PEU中PLLA链段的热降解,第二段为其中PBS链段的降解;拉伸测试结果表明,PBS与PLLA的共聚能够制备拉伸强度与断裂伸长率优异的聚合物材料.     

含介晶单元的反应性增韧剂改性环氧树脂研究──Ⅰ.柔性链分子量对动态力学与冲击性能的影响

本文合成了既含聚醚柔性链、又含刚性介晶结构单元的活性增韧剂（LCEU(PEG)），用其改性E－51／dicy固化体系。系统研究了增韧剂中柔性链分子量与改性体系动态力学性能、冲击性能之间的关系。动态力学分析表明：改性体系的100℃以下的模量没有降低，并且随LCEU(PEG)中柔性链分子量的降低而略有升高；Tg随LCEU(PEG)的加入而略微降低，随改性剂中柔性链分子量的降低而略微增大。冲击实验结果表明：当LCEU(PEG)柔性链分子链为1000、600时，改性体系的冲击强度可以提高6~7倍；而当LCEU(PEG)柔性链分子链为400、200时冲击强度最大只能提高4倍。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.