异硫氰酸异鲁米诺的电致化学发光性质及其机理

研究了异硫氰酸异鲁米诺的电致化学发光性质及其反应机理。在ＫＯＨ－ＫＣｌ－Ｈ２Ｏ２介质中，施加三角波脉冲电压使异硫氰酸异鲁米诺产生较强的电致化学发光，其浓度在２．５×１０＾－１１－１．０×１０＾－７ｍｏｌ／Ｌ范围与发光强度成线性关系，检测限为６．２×１０＾－１２ｍｏｌ／Ｌ。     

含有吸附络合物溶液的倒数示波计时电位法的应用

Ｐｂ（Ⅱ）在０．２％乙二胺－５×１０＾－３ｍｏｌ·Ｌ＾－１ＨＯｘ－０．３ｍｏｌ·Ｌ＾－１ＫＯＨ溶液中，有良好的全数示波图，其峰电位Ｅｐ＝－１．０５（ｖｓ．ＳＣＥ），峰高与Ｐｂ＾２＋溶度在４．０×１０＾－７～２．０×１０＾－５ｍｏｌ·Ｌ＾－１内成正比，检测下限可达２．０×１０＾－７ｍｏｌ·Ｌ＾－１。本实验采用倒数示波计时电位法对铝合金“Ａ”中铅进行了测定，并直接通过示波图，对络合物的吸附属于性进行了     

流动注射—吐温40化学发光新体系测定贵金属冶金物料中微量铱

本文研究了吐温４０－ＫＯＨ－Ｈ２Ｏ２－Ｉｒ化学发光新体系，采用流动注射进样技术，建立了测定铱的新的化学发光分析法，检测限为１．１×１０＾－１３ｇ／Ｌ；线性范围为每ｍＬ１．０×１０＾－９－１．０×１０＾－５ｇ。经离子交换分离Ａｕ和Ｏｓ离子后，测定贵金属冶金物料中微量铱，结果满意。     

环丙沙星的极谱催化波研究

在０．１ｍｏｌ／ＬＫＨ２ＰＯ４－ＮａＯＨ（ｐｈ６．８±０．２）的缓冲溶液中,在眄环丙沙星产生一极谱催化波,其二阶导阴极催化波峰高与环丙沙星浓度在９．８５×１０＾－７￣１．９７×１０＾－５ｍｏｌ／Ｌ范围呈良好的线性关系,相关系数为０．９９９９。该法已用于测定盐酸环丙沙星片中的环丙沙星的含量,结果满意。实验证明其电极过程 吸附催化波的特征。     

示波极谱法测定内燃机车冷却液中亚硝酸根含量

采用ＪＰ３－１型示波极谱仪，滴东电极１．５次微分，在－０．６～－１．９０Ｖ范围内，通过对多种底液组分的试验，确定了在２．００×１０＾－３ｍｏｌ．Ｌ＾－１Ｍｎ＾２＋，盐酸（ｐＨ２）底液中，ＮＯ＾－２在－１．３２Ｖ（ｖｓ．ＳＣＥ）处于生极谱法，ＮＯ２浓度在４．００×１０＾－５～４．００×１０＾－３ｍｏｌ．Ｌ＾－１范围与峰高呈线性关系。方法可用于测定内燃机车冷却液中ＮＯ２含量，其选择性好，操作简便，快速     

烟酰胺极谱行为的研究

用单扫示波极谱法，烟酰胺在ＫＨ２ＰＯ４－Ｎａ３２Ｂ４Ｏｒ－ＮａＯＨ，底液中呈出现良好的二阶导数峰，Ｅｐ＝－１．８０±０．０１Ｖ，在５×１０＾－７－２×１０＾－５ｍｏｌ／Ｌ范围内，峰高与浓度成线性关系，检测限为２．２×１０＾－７ｍｏｌ／Ｌ。此法用于ＮＡ片剂含量的测定，其结果良好。     

N—（β—羧丙酰基）异鲁米诺的电致化学发光行为及其机理探讨

本进行了Ｎ－（β－羧丙酰基）异鲁米诺的电致化学发光行为的研究。采用正矩形液脉冲电压，在ＫＯＨ－ＫＣｌ－Ｈ２Ｏ２－（ｐＨ１１．６）介质中，Ｎ－（β－羧丙酰基）异鲁米诺测定的线性范围为４．０×１０＾－１０￣７．０×１０＾－８ｍｏｌ／Ｌ，检出限为２．０×１０＾－１０ｍｏｌ／Ｌ。本对此体系的电致化学发光机理进行了探讨。     

流动注射化学发光测定乙醛的研究

本文研究了应用Ｇａ（没食子酸）－Ｈ２Ｏ２－ＯＨ＾－化学发光体系，流动注射技术测定乙醛的条件，如反应介质及其ｐＨ值，Ｇａ及Ｈ２Ｏ２溶液的浓度，温度，试液混合次序与化学发光强度的关系等，选择了流动注射系统的若干参数，所拟定的方法测定乙醛的浓度范围为每ｍＬ１．７×１０＾－３～４．４×１０＾－７ｇ，相对标准偏差为１．８％（２×１０＾－５ｇ／ｍＬ，乙醛溶液进行１１次平行测定）检出限为每ｍＬ３．１×１０＾－８     

铜（Ⅱ）锌（Ⅱ）—氟哌酸体系电化学行为及示波极谱法研究

铜（Ⅱ）和锌（Ⅱ）分别在０．１ｍｏｌ／ＬＫＨ２ＰＯ４－Ｎａ２ＨＰＯ４缓冲溶液（ｐＨ６．５）和０．２５ｍｏｌ／ＬＮＨ４Ｃｌ溶液中，与氟哌酸形成良好的络合吸附波，峰电位分别为－０．２６Ｖ和－１．２８Ｖ（ｖｓ．ＳＣＥ），络合比分别为１：３和１：２，峰电流与铜（Ⅱ）和锌（Ⅱ）的浓度均在４．０×１０＾－７～５．０×１０＾－６ｎｏｌ／Ｌ范围内呈线性关系，检测限分别为７．０×１０＾－８和５．０×１０＾－８ｍｏｌ     

头孢噻肟钠的降解及其产物伏安行为的研究

头孢噻肟钠在ＮａＯＨ溶液中降解后，于０．１ｍｏｌ／ＬＮａＯＨ中得一灵敏的吸附伏安原峰，Ｅｐ＝－０．７８Ｖ（νｓＡｇ／ＡｇＣｌ），ｉｐ与头孢噻肟钠浓度在１．０×１０＾－＾９－１．０×１０＾－＾８，１．０×１０＾－＾８－１．０×１０＾－＾７，１．０×１０＾－＾７－１．０×１０＾－＾６ｍｏｌ／Ｌ范围内呈线性关系，检出限为５．０×１０＾－＾１＾０ｍｏｌ／Ｌ。用多种电化学手段研究其降解产物的伏安行为，测定了     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.