用于爆炸物探测的X射线相干散射技术研究

建立了基于X光机的相干散射实验装置, 对用于爆炸物探测的X射线相干散射技术进行了研究. 在一个固定的角度下(6.5°), 测量了多种常见爆炸物和非爆炸物的相干散射谱. 结果表明, 每种爆炸物都有特定的相干散射谱线, 包含了与物质化学组分相关的"指纹信息". 使用这一方法可以将爆炸物从常见的非爆炸物中鉴别出来.     

X射线荧光光谱中散射效应对荧光强度的贡献研究

采用理论计算和实验测定的方法研究了在纯元素样品、BaB二元样品及熔融片样品中三种散射效应对荧光强度的贡献(包括相干散射X射线激发的荧光强度、非相干散射X射线激发的荧光强度以及其他方向的一次荧光X射线被散射进探测方向的强度)大小及其变化规律。研究结果表明,三种散射效应对荧光强度的贡献大小与所研究元素原子特征谱线的能量及样品的基体有关,元素原子的特征谱线能量越高,散射效应对荧光强度的贡献越大;轻基体样品中散射效应对荧光的贡献比重基体样品大。实验证明,将散射效应包括在基本参数法的理论计算中可以有效地提高理论计算的准确度。     

同步辐射SAXS技术在TATB含能材料微孔结构研究中的初步应用

TATB含能材料的微结构对该材料的感度等有明显的影响,因而对于材料的安全性有着特别重要的意义.小角X射线散射(SAXS)技术是一种分析物质微观结构的重要手段,应用SAXS分析技术可以获取材料中几纳米到几百纳米尺度范围的亚微结构信息.利用同步辐射作为X射线源对TATB钝感炸药进行了小角散射实验测量,获得了SAXS测量谱.对实验谱数据进行处理,可得到样品材料的颗粒分布及内部微孔大小等微结构参数.     

爆炸物检测中典型样品的瞬发γ谱测量

在中子检测爆炸物的研究中,利用14 MeV中子与原子序数大于5的原子核相互作用可产生特征射线的特性,采用伴随粒子法结合D-T中子飞行时间技术,使用尺寸为12.5 cm20 cm的大体积NaI(Tl)探测器,对爆炸物所含元素C,N,O以及一些模拟炸药样品进行了瞬发谱测量。获得了几种典型样品的特征谱,并对其进行了分析。实验结果与欧盟同期结果进行了比较,表明本实验研究达到了目前国际同类实验的水平,可以为中子检测爆炸物识别技术提供实验支持。     

共振非弹性X射线散射——一种新型的X射线谱学探测方法的介绍

文章对一种新型X射线谱学探测方法——"共振非弹性X射线散射"进行了介绍,对它的方法特点和优势以及在各个领域内的最新研究进展做了简要概括.     

微波等离子体化学汽相沉积法沉积CNx膜的研究

对用微波等离子体化学汽相沉积法沉积在Si基片上的CN_x膜分别进行Raman散射、X射线光电子能谱、X射线衍射和扫描电子显微镜等技术的分析与测试. Raman散射的研究结果表明在CH₄与N₂的流量比低于1∶8时，CN_x膜的散射谱中以非晶石墨峰的形式出现.当流量比为1∶8时，则表现为较尖锐的C≡N键(2190cm^-1)的特征峰；从X射线光电子能谱的分析结果可以看出C，N成键的方式主要是C≡N键和C—N 关键词：     

XRF中激发电位和靶材对散射效应增强荧光强度的影响研究

采用一组熔融片样品研究了由不同的X光管激发电位和不同的X光管靶材(Cr靶和Rh靶)所导致的入射X射线能量及强度分布变化对3种散射效应增强荧光强度的影响规律。研究的散射增强包括相干散射激发的荧光强度、非相干散射激发的荧光强度以及其他方向的一次荧光被散射进探测方向的强度。研究结果表明,对于采用的熔融片, 相干散射效应和一次荧光被散射进探测器方向增强效应对荧光强度的贡献随X光管激发电位增大而减小,用Cr靶原级谱激发比用Rh靶原级谱激发贡献大;而非相干散射效应对荧光强度的贡献则随X光管激发电位增大而增大,用Rh靶原级谱激发比用Cr靶原级谱激发贡献大;3种散射效应对荧光强度的总贡献随X光管激发电位增大而增大,在Rh靶原级谱激发条件下比用Cr靶原级谱激发贡献大。     

原位能量色散X射线荧光分析中岩样基体效应及其修正研究

原位能量色散X射线荧光现场分析岩样矿物成分时,岩样基体效应会对测量结果产生影响。本文以Cu元素作为待测元素,研究了17种不同岩样基体对原位能量色散X射线荧光分析Cu元素特征X射线强度的影响及其修正方法。采用蒙特卡罗方法模拟获得了Cu元素含量相同的17种不同岩样测量谱线,综合各类岩石元素构成的相似性,并依据模拟谱线Cu元素Kα射线强度与谱线参数之间的相关性,反映了原位能量色散X射线荧光分析岩样Cu元素的基体效应并不完全受岩体元素构成或岩石分类的控制,需要依据岩石样分析谱线参数的相关性进行归类讨论。针对基体影响Cu元素特征射线强度相似的15种岩样进一步研究,并对Cu元素特征X射线与谱线主要参数的主成分进行分析,发现散射本底、X光管靶材料特征X射线及其非相干散射峰强度能够很好的描述Cu元素特征X射线强度受岩样基体影响的变化,据此可以对基体效应影响相似的岩体进行Cu元素测量结果修正。采用本文方法同样也能为不同岩性岩体其他待测元素基体效应的修正提供参考。     

X射线荧光测井谱漂校正技术研究

X射线荧光测井技术是一种可以在井下原位进行元素定量(半定量)分析的测井技术,对矿产勘查具有重要意义。受井下温度影响,X射线荧光测井仪容易发生谱漂。X射线测井仪采用硬件进行稳谱,采用软件实现微小谱漂校正。X射线荧光测井的谱数据量大,难以采用人工校正的方法实现。文章在总结了X射线荧光测量专业人员进行谱漂校正经验的基础上,结合专家系统研究了X射线荧光测井谱漂的校正方法。在谱漂校正过程中,采用对散射本底变化不灵敏的对称零面积法进行自动寻峰,并用标准方差进行指示峰判别。利用先验知识(上一次能量刻度)和高斯概率密度函数对当前指示峰进行定性分析,确定指示峰能量。将指示峰峰位和定性分析获得的能量值采用最小二乘法进行拟合,获得能量刻度系数,并对偏离较大的数据进行筛选,达到能量自动刻度目的,实现X射线荧光测井仪器谱谱漂校正。文章采用所述的谱漂校正方法对某次X射线测井仪温度实验的322条谱线进行校正,结果表明该方法能够有效地自动校正X射线荧光测井仪谱漂。     

α粒子散射对爆炸物检测时间分辨的影响

对爆炸物检测中伴随α粒子技术的时间谱进行了研究,建立了一套基于伴随α粒子技术的时间谱测量装置,分析了影响时间谱分辨的若干因素。采用60μm厚的铜箔设计了一个锥形准直筒对散射的α粒子进行屏蔽,以500 g尿素为样品测量了α-γ符合时间谱。结果表明,α粒子在靶室内壁的散射是影响时间谱分辨的重要因素,锥形准直筒抑制了与α散射相关中子产生的γ射线,提高了α-γ符合时间谱的分辨。在有无锥形准直筒的条件下,符合时间谱特征瞬发峰γ的半高宽分辨力分别为1.8 ns和6.4 ns。分辨力高的时间谱可用于获取爆炸物样品的特征瞬发γ能谱。     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.