大孔树脂分离纯化藏药白花龙胆花总黄酮的研究

考察了HPD-826、HPD-417、ADS-17、HPD-722、HPD-450、AB-8、HPD-600、D-101,共8种大孔树脂对藏药白花龙胆花总黄酮的吸附和解吸性能,通过静态吸附量和解吸附率及静态吸附曲线的绘制,筛选出AB-8树脂的效果最佳;以AB-8树脂为目标,进行了动态吸附实验,考察了上柱液浓度、pH值、上柱液流速、乙醇浓度、解吸剂流速、解吸体积等对AB-8树脂吸附和解吸效果的影响,确定出AB-8树脂动态吸附白花龙胆花总黄酮的最佳条件:上柱液浓度为6.5mg/mL,pH为3.79,上柱流速4BV/h;最佳洗脱条件:用50%乙醇进行洗脱,解吸流速为3BV/h,解吸体积4BV。在此条件下,白花龙胆花总黄酮纯度由原来的22.10%,变为65.75%,产品精制倍数为65.75%/22.10%=2.97,表明AB-8树脂可用于白花龙胆花总黄酮的分离纯化。     

用大孔吸附树脂分离利血平

以利血平的吸附量和解吸率为指标,筛选大孔吸附树脂.研究吸附和解吸的优化条件,并考察选定树脂的吸附等温线、吸附动力学、吸附和解吸性能.结果表明,将催吐萝芙木根粉浸提液蒸去乙醇且不调pH(pH 1)进行吸附,HZ-818型大孔吸附树脂对利血平的吸附量可达到9.34mg/mL.使用工业乙醇-水(80:20,pH 1.0)为解吸剂,解吸率可达99.3%.该树脂的吸附符合Langmuir吸附等温方程.吸附前期,吸附速度较快,以后速度减慢.HZ-818型树脂对利血平的吸附量大,解吸率高,通过大孔树脂吸附和解吸,利血平浓度提高50倍以上,适宜于工业化生产.     

大孔吸附树脂分离纯化枳实中辛弗林的研究

以辛弗林的吸附量、解吸率和所得粉末中辛弗林的含量为指标,从选用的6种大孔吸附树脂中筛选出较好的AB-8树脂。通过静态和动态实验,对辛弗林在AB-8树脂上吸附和解吸的条件进行优化,并考察其吸附等温线、吸附和解吸性能。结果表明,在环境温度约25℃下,使用AB-8树脂纯化辛弗林的较优工艺参数为:上柱液pH值7～8,流速2BV/h,溶液处理量3BV,洗脱剂为20%乙醇,洗脱速度1BV/h,收集洗脱液3BV。按此工艺条件,辛弗林的解吸率为87.2%,3BV洗脱液浓缩干燥后,所得粉末中辛弗林含量为56.6%。     

大网格吸附剂提取头孢氨苄

本文研究了用大网格吸附剂提取头孢氨苄的方法，包括吸附剂和解吸剂的筛选，吸附条件和解吸条件的考察。确定了用H—103型树脂在pH5、流速1／10（V／V／min）条件下吸附；用50％丙酮在pH1．5、流速1／30（V／V／min）条件下解吸。吸附容量可达75mg／ml，是国内报道过的CAD—40的3倍，是国外报道过的DiaionHP－20的3．8倍，解吸率可达92％以上。     

大孔吸附树脂提取喜树碱的研究

本文研究了大孔吸附树脂提取喜树碱的方法，包括树脂的筛选，喜树碱溶液的浓度、温度、ＰＨ值和盐离子浓度对吸附的影响，解吸剂的选择，解吸剂的ＰＨ值、流速对解吸的影响。确定了适宜的吸附和解吸条件。     

树脂吸附法提取林可霉素

本文研究了用大孔吸附树脂提取林可霉素的方法,包括大孔吸附树脂的选择,林可霉素溶液的pH值、浓度和流速对吸附的影响,解吸剂的选择,解吸剂的pH值和流速对解吸的影响,确定了适宜的吸附和解吸条件,并在实验室由小规模提取验证,认为这条工艺路线是可行的。     

离子交换树脂的选择及柠檬酸溶液循环使用研究

用离子交换树脂法吸附柠檬酸溶液中的金属离子,苯乙烯系阳离子交换树脂的吸附性能较好,它对镍、铝离子的吸附容量均较大,且吸附前后柠檬酸溶液的浓度变化较小.静态条件下树脂对镍的吸附容量为16.83mg Ni/g干树脂,对铝为21.36mg Al/g干树脂;动态条件下树脂对镍的吸附容量为6.78mg Ni/g干树脂,对铝为31.8mgAl/g干树脂,吸附液流速为1m/h～3m/h.吸附后的柠檬酸溶液可循环使用.当用1mol/L硫酸解吸时,树脂对镍铝的解吸率可达90%以上.当硫酸中Ni2 为1.70mmol/L,Al3 为7.40mmol/L时,树脂的解吸率仍可达80%以上.     

D406螯合树脂对硫酸锌溶液中氟的吸附和解吸性能及动力学研究

研究了D406螯合树脂对硫酸锌溶液中氟的吸附和解吸性能,考察了影响氟吸附和解吸的因素以及该树脂吸附和解吸氟的动力学参数。结果表明,在25℃、pH=2、硫酸锌浓度为1.50mol/L、氟离子浓度为200mg/L条件下,D406螯合树脂对氟的吸附量为5.55mg/g。D406螯合树脂对氟的吸附符合Freundlich吸附模型。吸附和解吸的动力学符合Boyd液膜扩散方程,吸附反应活化能Ea=12.14kJ/mol,解吸反应活化能Ea=19.54kJ/mol。     

转型TP207树脂从低浓度稀土溶液中富集稀土的研究

为实现从低浓度稀土溶液中高效富集稀土,通过动态吸附-解吸试验,研究了转型TP207树脂吸附稀土的规律。系统考察了离子交换线速度、吸附液体积、初始p H值、铝离子对树脂吸附稀土容量的影响,以及解吸液体积对稀土解吸率的影响。结果表明：在稀土浓度为1.65g·L^-1,离子交换线速度为3 cm·min^-1,吸附液体积为7.50 L,初始p H值为3.46的条件下,TP207树脂对稀土吸附量Q_n1=0.18 g·g^-1;稀土溶液中铝和稀土存在竞争吸附,当Al³⁺浓度为0.35 g·L^-1时,TP207树脂对稀土吸附量Q_n2降为0.11 g·g^-1;采用5%的稀HCl对饱和树脂进行解吸,在解吸液体积为0.525 L时,稀土解吸率可达99.45%;树脂吸附稀土过程属于阳离子交换反应,符合Langmuir等温吸附模型,为单分子层吸附,树脂中C=O的O原子和C-N的N原子均参与配位反应。     

大孔树脂对白蜡种子鞣质的纯化工艺研究

选择6种大孔吸附树脂,比较其对大叶白蜡种子鞣质的吸附量和解吸率,筛选出较优的大叶白蜡种子鞣质吸附剂,并通过单因素实验和正交实验,对其静态吸附-解吸和动态吸附性能进行考察。实验结果表明,NKA-9树脂适合大叶白蜡种子鞣质的吸附分离,其最佳的吸附工艺参数为:上样浓度为3mg/mL、pH值为4、上样量为7BV、上样流速为1BV/h。     

微波场协同提取野菊花黄色素的研究

研究了微波提取野菊花 (Chrysanthemumindicum)黄色素的新工艺并确定了最佳工艺条件 :原料为 2 0 0 0 0g野菊干花 ,提取剂为无水乙醇 ,提取剂比例为 1 /70 ,微波功率为 80 0W ,提取时间为 45 0s,提取次数为 3次 ,最佳工艺条件下色素的提取率为 91 1 % ,产率为 1 4 6% ,色价E ( 1 % ,3 2 1nm)为 42 2 ,产品pH值为 6 5。与溶剂浸提法相比 ,微波提取野菊花黄色素的每次提取时间由 1 2h减小为 45 0s,提取率从 88 6%增加到 91 1 %。     

Isolation and enrichment of Ginkgo biloba extract by a continuous chromatography system

In this study, an effective method was developed for the isolation and enrichment of Ginkgo biloba extract by continuous chromatography system. The adsorption and desorption ratio of flavonoids as main index, the best macroporous resin was screened out from six resins by static adsorption and desorption tests. At the same time the adsorption and desorption parameters were optimized by dynamic adsorption and desorption tests. Under optimal parameters, five operations consisting of loading, washing, desorbing, regenerating, and balancing were integrated across the continuous chromatography system for the purpose of refining 66 L of crude extract solution. The results were as follows, 198.22 g of Ginkgo biloba extracts was produced, which contained 65.83 g of flavonoids and 15.44 g of lactones. The content of flavonoids and lactones increased from 2.76 and 0.72% in the crude extract to 33.21 and 7.79%, with a recovery yield of 91.26 and 81.21%. Methodology validation showed that the proposed method had high stability and reproducibility. Compared with the traditional macroporous resin method, the proposed method had a short processing time and low solvent consumption. Our studies indicated that the newly developed method is an effective procedure for the isolation and enrichment of Ginkgo biloba extract.     

Solid-Phase Extraction of Trace Amounts of Selenomethionine

Abstract

Preconcentration and separation of trace amounts of selenomethionine was investigated using several solid sorbents. The best results were obtained with copper-treated Chelex 100 chelating resin. Selenomethionine from 100 ml of solution adsorbed on 0.2 g of the resin was eluted with 8 ml of 1.5 mol/l ammonia solution and determined by electrothermal atomic absorption spectrometry. The column chromatography with Cu-Chelex and functionalized cellulose sorbent Cellex T was applied to separate organic and inorganic selenium forms.     

大孔吸附树脂分离提取多杀菌素

采用大孔吸附树脂法分离提取多杀菌素.从11种大孔吸附树脂中筛选出DM11进行了静态、动态吸附性能实验,并考察了不同吸附、解吸条件的影响.结果表明,DM11的静态吸附容量为25.63mg/g(wet resin),其吸附等温线符合Langmuir吸附等温式.采用丙酮做洗脱剂,洗脱率为97.5%,动态吸附最佳吸附pH为9.5,吸附流速为6BV/h,穿透吸附容量为21.2mg/ml(wet resin),洗脱流速1.5BV/h.     

717型阴离子交换树脂吸附水溶性芳香族有机污染物研究

研究了717型阴离子交换树脂对苯酚、苯甲酸和十二烷基苯磺酸钠(SDBS)等水溶性芳香族污染物吸附过程的基本化学问题.研究结果表明:717型树脂对苯酚、苯甲酸和SDBS的吸附过程均符合Lagergren二级吸附动力学方程,吸附速率均随着温度的升高而加快,吸附表观活化能Ea分别为13.2kJ/mol、59.5kJ/mol和48.1kJ/mol,吸附过程△H0和△S0均为正值,△G0均为负值,吸附能够自发进行;吸附等温模型符合Langmuir等温式;318K时,717型树脂在pH=9.1对SDBS的饱和吸附容量为360mg/g;在pH=10.2,对苯酚和苯甲酸的饱和吸附容量分别为194mg/g和286mg/g.用浓度均为0.5mol/L,体积比为5∶1的NaCl-NaOH混合溶液可快速洗脱树脂上吸附的污染物,洗脱率达98％以上.该树脂对水溶性芳香族污染物吸附容量大,易于再生和循环利用,可用于环境水体中水溶性芳香族有机污染物的吸附治理.     

丙烯酸酯类吸油树脂的合成与性能研究

以丙烯酸酯、甲基丙烯酸酯为主要单体,二丙烯酸丁二醇酯为交联剂,过氧化二苯甲酰为引发剂,采用悬浮聚合方法,合成聚丙烯酸酯类高吸油树脂.研究了分散剂、引发剂、交联剂用量及单体配比等因素对树脂吸油性能的影响.结果表明,分散剂用量为单体质量的0.12%,引发剂用量为1.0%,交联剂用量为1.5%时树脂的吸油能力最佳,吸甲苯倍率可达15倍,吸汽油倍率可达10倍,吸机油倍率可达近9倍.     

Study on Adsorption and Separation of Naringin with Macroporous Resin

X-5 resin, with higher adsorption and easier desorption of naringin, was selected from five kinds of macroporous resins through static adsorption and desorption experiments. Effects of concentration, pH value, and flow rate of naringin extract on the adsorption of naringin by X-5 resin were studied. Meanwhile, the effect of these factors on the desorption of naringin from X-5 resin was also investigated. The experimental results show that the adsorption isotherm of naringin by X-5 resin can be described by the Langmuir isotherm equation. The static maximum adsorption capacity of naringin is 32.6 mg/g with naringin concentration at 2.7 g/L, while the dynamic adsorption capacity of naringin is 23.8 mg/g with naringin extract flow rate at two times that of resin volume per hour. The optimal eluant is 60% (v/v) ethanol-water with pH value of 10. The desorption ratio will rise to more than 85% when the flow rate of this optimal eluant is one to two times that of resin volume per hour. Translated from Journal of Central South University (Science and Technology)     

腐植酸对砷的吸附作用研究

腐植酸中含有大量的极性基团,对金属离子有较强的吸附性能。运用氢化物-原子荧光光谱法,以泥炭腐植酸为原料,研究了腐植酸对砷(V)离子的吸附作用和腐植酸吸附剂中砷的回收,并得出了最佳的吸附和脱附条件。实验考察了酸度、时间分别对吸附和脱附的影响。结果表明,泥炭腐植酸对砷吸附的最佳模型为Freundlich吸附方程,当溶液成中性时腐植酸对砷的吸附量较大且趋于平稳。砷的浓度为1μg/mL,溶液的pH值为7,吸附时间控制在55min时,吸附效果最佳,最大吸附率为85.49%。脱附的最佳条件为:pH值14,脱附时间20min。     

酚醛型吸附树脂对VB_(12)的吸附性能研究

研究了酚醛型吸附树脂JDW 1、JDW 2 (自制 )和DuoliteS 76 1对VB12 的静态和动态吸附 .结果表明 ,JDW 1对VB12 的吸附量达 84mg g ,明显优于DuoliteS 76 1;吸附VB12 的初始阶段 ,即达到 4 3%～6 9%平衡吸附时 ,吸附速率数据和半经验速率方程很吻合 ;酚醛型吸附树脂等温吸附VB12 的平衡吸附数据符合Langmuir方程 ,相关系数在 0 99以上 ,因此 ,酚醛型吸附树脂吸附VB12 属单分子层吸附 ;在动态条件下 ,用含甲醇 80 %溶液以 1 1BV h来洗脱吸附VB12 的JDW 2 ,在 4 2、6 4个床体积的洗脱率分别是 92 2 0 %、95 93% ,这表明酚醛型吸附树脂具有良好的洗脱性能 ,用含甲醇为 80 %溶液作洗脱剂从JDW 2洗脱VB12 ,效果很好     

Immobilization strategies of Brucella particles on optical fibers for use in chemiluminescence immunosensors

Immunosensors are powerful analytical tools in clinical and veterinary diagnostics. This has led us to design a chemiluminescent immunosensor aimed at identifying anti-Brucella antibodies using optical fibers as the transducer. In order to develop the optimal transducer, to achieve an optimal chemical modification thereby allowing an optimal covalent binding of the protein receptor, several cleaning strategies and silane coupling agents were investigated. Brucella killed organisms were used as a model receptor for quantifying anti-Brucella IgG antibodies in a suspension compared to conventional colorimetric and chemiluminescent ELISA. A silane-benzophenone derivative was selected as the best performing silane coupling agent: the optical fiber immunosensor (OFIS) has showed the lowest limit of detection at 0.207 μg/ml, compared to 0.828 μg/ml and 0.414 μg/ml achieved by colorimetric and chemiluminescent ELISAs, respectively. These results, together with the additional advantages of rapidity, lower reagent volumes and moderate operating conditions, have set the grounds for further study in order to adapt this platform for on-site diagnostics of brucellosis disease markers.