Levitation of a superconducting body in the field of N magnetic poles

Advanced magnetic technologies make it possible to create REE-based permanent magnets with a magnetic field sufficient for levitation. In this work, the feasibility of levitation in the field of arbitrarily (discretely or continuously) distributed magnetic poles is analyzed. A magnetic pole simulates a long and thin permanent magnet. The results obtained enable designing a levitator for an arbitrary distribution of magnets. A number of magnetic pole configurations is considered. The range of the levitator’s parameters providing stable equilibrium of the rotor in the magnetic field is found.     

STUDIES OF THE FIELD DISTRIBUTION OF THE MODULATING WIDTH MULTIPOLE PERMANENT MAGNETS

In this paper,the magnetic field distribution of the modulating width multipole permanent magnets is analyzed. Only radially magnetized permanent magnet segments are used and the required magnetic field is formed by modulating the widths of the segments in this project. In 2-dimensional ideal case pure 2N-pole magnetic field can be formed. The spatial expressions of the scalar potential for the ideal and real 2-dimensional cases are given. And the methods for reducing the undesirable higher harmonics of the magnetic field in the real case are also discussed.     

ECR离子源六极永磁体的设计研究

分别从材料、结构、尺寸等方面全面地研究了Halbach结构六极永磁铁的设计方法.针对个别磁块可能存在的退磁问题给出了相应的解决方案.通过优化结构,使六极磁铁在离子源等离子体弧腔内壁产生的磁场达到最大.用POISSON,PERMAG,TOSCA等多个磁场模拟程序计算模拟了六极磁场的大小与分布,并给出了一些相应的曲线     

A permanent spherical magnet with inhomogeneous magnetization

Inhomogeneously distributed magnetization that induces a strong magnetic field in a predetermined local area is established in finite permanent magnets. The maximum possible magnetic induction in the vicinity of a magnet’s center is found analytically for a perfect spherical magnet.     

轴对称高场超导磁体电磁应力有限元分析方法

核磁共振成像和核磁共振谱仪是高场超导磁体的主要应用领域.高场超导磁体通常具有较高的磁场和运行电流,在运行过程中超导线会产生较高的电磁应力,其临界特性将发生退化,影响磁体的稳定性.开展高场超导磁体的电磁应力精确分析显得尤为必要.本文发展了一种快速有效的有限元分析方法,第一步,为整个超导磁体系统建立平均有限元模型,采用传统的电磁-结构耦合方法求解电磁应力,获得最大应力位置;第二步,对最大应力所在的超导线圈建立详细有限元模型,采用单积分-结构分析方法精确求解每一组分中电磁应力.基于该模型研究了500 MHz NMR超导磁体的电磁应力.该分析方法也可以用于超导磁体冷却过程中的热应力分析.为高场超导磁体设计和建造提供有益的理论依据.     

磁约束磁控溅射源的磁场设计

磁控溅射镀膜机中的磁场分布对靶材利用率有着重要影响。为了提高磁控溅射源的靶材利用率,设计组抛弃了传统的"跑道环"形式的磁场设计理念,而是将永磁体或电磁体分置溅射靶的两侧,使其在溅射靶表面上方产生磁约束(磁镜)磁场。本设计使用有限元分析方法对磁场进行仿真计算,通过模拟磁场计算结果和实测结果的比较,验证有限元方法的可靠性。Ansys有限元分析软件对磁场分布进行仿真模拟,大大简化了计算并缩短了设计周期。通过实验验证,磁约束磁场大大提高了靶材的利用率。     

Analytical dependences used for preliminary synthesis and optimization of cyclotron magnetic structures

Analytical dependences used for preliminary synthesis and determination of the main physical and geometrical parameters of cyclotron magnetic structures and magnet itself are examined herein. A method of obtaining, describing, and graphically representing these two-dimensional analytical dependences are also examined. Their use allows preliminary synthesis and optimization of near-azimuthically magnetic structures of cyclotrons with straight and spiral sectors. The ratio of their air gaps in the valley and in the region of the sectors shouldn’t exceed 25 and the average magnetic field shouldn’t be more than 2 T. The use of some of these became the basis in developing the CyclSyntWin software application, which has been used already for several years at the Laboratory of Nuclear Reactions of the Joint Institute for Nuclear Research in Dubna for preliminary synthesis and optimization of the main parameters of cyclotron magnetic structures and magnets.     

基于近似解析法的超导储能磁体设计

降低超导储能磁体的研制成本一直是控制超导磁储能系统(Superconducting Magnetic Energy Storage, SMES) 总成本的重要手段之一. 本文考虑在一定磁体结构参数范围内, 磁体产生的最大磁场值可以采用级数进行 表示, 磁体的电感值可以采用线性函数表示, 给出了超导储能磁体磁场能量的近似解析表达式, 提出了一种基于近 似解析法的超导储能磁体设计方法. 该方法以储能磁体的线材用量最小作为设计目标, 在给定超导线材参数和临界电流特性曲线, 以及磁体储能总量要求的情况下, 依据此方法可快速的得到成本最优时所对应的磁体结构参数.将近似解析法优化和采用传统的有限元软件 Ansys 仿真优化进行对比分析, 结果表明采用近似解析法进行磁体优化更加方便快捷, 节省了大量计算时间.     

用于ECR离子源的超导磁体——设计与制造

Superconducting magnets are widely used in ECR ion sources.The intensity and form of the magnetic field plays an important role in the way towards higher performance sources.During the development steps,the design principles and geometries had to be adapted to reach higher fields using state-of-the-art technologies and design tools.Production,assembly,and tests of these superconducting magnets are presented and a short outlook on possible future developments is given.     

HIRFL-CSRe二极铁积分磁场测量

 介绍了兰州重力加速器冷却储存环实验环二极磁铁积分长线圈测磁装置的构成，描述了实验环二极铁的分散性测量、横向分布测量、传递函数等测量内容及测量方法。实验环二极铁采用不断地加减硅钢铁片垫补和加调整线圈电流的方法来调整二极磁铁的有效长度来改变分散性。通过垫补和测量，二极磁铁的分散性在优化磁场时达到±2×10^-4。同时给出了二极铁的横向分布和传递函数的测量结果。对二极铁的设计和加工进行了修正。     

Exact diffraction calculation from fields specified over arbitrary curved surfaces

Calculation of the scalar diffraction field over the entire space from a given field over a surface is an important problem in computer generated holography. A straightforward approach to compute the diffraction field from field samples given on a surface is to superpose the emanated fields from each such sample. In this approach, possible mutual interactions between the fields at these samples are omitted and the calculated field may be significantly in error. In the proposed diffraction calculation algorithm, mutual interactions are taken into consideration, and thus the exact diffraction field can be calculated. The algorithm is based on posing the problem as the inverse of a problem whose formulation is straightforward. The problem is then solved by a signal decomposition approach. The computational cost of the proposed method is high, but it yields the exact scalar diffraction field over the entire space from the data on a surface.     

Ferromagnetic Resonance Fine Structure of Dispersed Magnets: Physical Origin and Applications

An original approach is proposed to study the dipole–dipole interparticle interactions in dispersed magnets. It is the registration and analysis of the noiselike ferromagnetic resonance fine structure, which is caused by the magnetic dipole–dipole interaction between magnetic domains. The features of fine structure formation are discussed. The experimental examples of the possible applications of the fine structure method are given. Authors' address: Oleg N. Martyanov, Boreskov Institute of Catalysis, Russian Academy of Sciences, Prospekt Akademika Lavrentieva 5, Novosibirsk 630090, Russian Federation     

Field Calculations for Permanent Magnets used for Glow Discharges

If a permanent magnet has both a homogeneous polarization inside the material and a linear demagnetization characteristic in external fields, its magnetic field can be expressed using a surface pole model. For magnets satisfying these conditions and, in addition, having a rectangular shape, the fields at any given point in space can be calculated analytically. An algorithm for this calculation is presented in a form that can easily be implemented into a computer program. In our experiments we used Nd₂Fe₁₄B magnets to support low pressure glow discharges by magnetic fields. The magnets can be seen as composed of elementary magnets with rectangular shape, for which the magnetic field distribution is calculable. We present results of field calculations for various configurations of permanent magnets that we used in hollow cathode and Penning discharges.     

Globally optimal superconducting magnets part II: symmetric MSE coil arrangement

A globally optimal superconducting magnet coil design procedure based on the Minimum Stored Energy (MSE) current density map is outlined. The method has the ability to arrange coils in a manner that generates a strong and homogeneous axial magnetic field over a predefined region, and ensures the stray field external to the assembly and peak magnetic field at the wires are in acceptable ranges. The outlined strategy of allocating coils within a given domain suggests that coils should be placed around the perimeter of the domain with adjacent coils possessing alternating winding directions for optimum performance. The underlying current density maps from which the coils themselves are derived are unique, and optimized to possess minimal stored energy. Therefore, the method produces magnet designs with the lowest possible overall stored energy. Optimal coil layouts are provided for unshielded and shielded short bore symmetric superconducting magnets.     

NMR hand-held moisture sensor.

An open magnet design, hand-held NMR sensor head is presented. Wood moisture content and cement hydration tests demonstrate the potential of the tool for in-situ material assessment. The magnetic field distribution was adjusted by positioning blocks of permanent magnets using millimeter scale 3-dimensional magnetic field modeling. A low Q-factor circuit was used for spin-echo sequences with short echo times.     

微型电子回旋共振离子推力器离子源结构优化实验研究

微型电子回旋共振(ECR)离子推力器可满足微小航天器空间探测的推进需求. 为此, 本文开展直径20 mm的微型ECR离子源结构优化实验研究. 根据放电室内静磁场和ECR谐振区的分布特点, 研究不同微波耦合输入位置对离子源性能的影响, 结果表明环形天线处在高于ECR谐振强度的强磁场区域时, 微波与等离子体实现无损耦合, 电子共振加热效果显著, 引出离子束流较大. 根据放电室电磁截止特性, 结合微波电场计算, 研究放电容积对离子源性能的影响, 实验表明过长或过短的腔体长度会导致引出离子束流下降甚至等离子体熄灭. 经优化后离子源性能测试表明, 在入射微波功率2.1 W、氩气流量14.9 μg/s下, 可引出离子束流5.4 mA, 气体放电损耗和利用率分别为389 W/A和15%.     

铁镓Janus-Helmholtz换能器非线性驱动

利用磁路法理论分析了磁阻对铁镓驱动磁场的影响,结果表明磁路中无永磁体时铁镓驱动磁场是有永磁体时的5倍以上,结合铁镓材料近似线性区小的特点,提出了一种无偏场非线性驱动方式。首先利用帕德逼近方法近似铁镓材料的磁化过程,得到磁场强度与磁致伸缩应变的关系,进而得到驱动电信号表达式,在此基础上提出了铁镓换能器的非线性驱动模型。设计研制了无偏场铁镓Janus-Helmholtz换能器样机,通过振动特性实验分析验证非线性驱动模型的可行性,最后在水中测试了换能器的发射性能。测试结果表明,采用无偏场非线性驱动的换能器在驱动电流为9.4 A时,声源级可达到198.2 dB,相对于永磁偏置磁场的换能器,声源级高了4 dB,发射性能得到了明显的提升。     

Magnetic relaxation in two-dimensional molecular magnets

Magnetic properties of planar molecular magnets have been investigated by Mössbauer spectroscopy. A significant increase in the linewidth of the magnetic hyperfine structure with an increase in temperature is observed. A fluctuation model of magnetism for magnets lacking long-range magnetic order is proposed. This model describes the magnetic field distributions in these magnets in a wide temperature range with the use of a fixed set of coupling constants.     

基于线性规划的高温超导磁体线圈设计方法

电子真空回旋器件是一种对磁场精度要求较高的微波源装置, 一般采用超导磁体提供磁场环境. 超导磁体的应用中, 磁场分布的实现是超导磁体设计的核心问题. 提供回旋器件磁场的高温超导磁体包含较复杂的磁体绕组, 为了解决此类设计计算问题, 本文提出了一种包含设计区域约束的线性优化方法进行回旋器件高温超导绕组的设计优化, 通过分步的约束和线性优化计算, 可得到同时满足设计要求和绕组可实现的设计磁场电流分布设计. 计算实例的结果给出了一个提供磁场强度1 .3 Tesla, 长度285 mm 的均匀磁场区域, 同时满足多位置的磁场要求, 设计结果与要求一致度较好, 精度满足应用需求. 该计算方法是一种可适用于较复杂磁场要求和超导绕组结构的设计优化方法.