Use of zwitterionic micelles in the eluent: a new approach for ion chromatographic (IC) analysis of ions in biological fluids with direct sample injection

The problem of column performance degradation due to irreversible binding of proteins encountered in ion chromatographic (IC) analysis of ions in protein-containing samples was overcome by using zwitterionic micelles (e.g., Zwittergent-3-14) as a portion of the eluent. A zwitterionic micellar eluent showed high ability for solubilization of proteins, and, hence, the protein-containing samples could be analyzed without need for deproteinization. On the other hand, the zwitterionic micelle was insensitive to conductivity but interacted with the analyte ions, due mainly to its unique configuration of charges (namely, the zwitterionic micelle containing both positively and negatively charged groups but carrying no net charge). Using a zwitterionic micellar eluent, the analyte ions could be detected selectively and sensitively, and moreover, the selectivity for the analyte ions was unique. A conventional anion-exchange column conditioned with a Zwittergent-3-14 micellar eluent was applied for the analysis of real biological samples (serum and urine) with direct sample injection. The results of the successful detection of inorganic anions (Cl-, SO4(2-), NO2-, Br-, and NO3-) have demonstrated the usefulness of this new IC approach for the analysis of biological samples.     

High-throughput nitric oxide assay in biological fluids using microchip capillary electrophoresis

In order to develop a high-throughput screening method for the nitrogen monoxide metabolites, nitrite and nitrate, in biological fluids, we have investigated the simultaneous determination of these metabolites using microchip capillary electrophoresis (MCE). In this study, the control of applied voltage to obtain higher sensitivity by increasing the sample injection volume was investigated. Also, the improvement of reproducibility by correcting the injection volume using the internal standard was investigated. By increasing the sample volume, the limits of detection achieved for nitrite and nitrate were 24 and 12 microM, respectively. Because we used a 10-fold diluted sample when detecting nitrite and nitrate in human serum, it was necessary to increase the sensitivity by a factor of 10-50. The run-to-run and day-to-day relative standard deviations achieved were improved to less than 10% by using an internal standard to correct the injection volume. Moreover, we obtained successful separation of nitrite and nitrate in spiked human serum within 6.5 s under optimum analytical conditions. As a result, although it is necessary to obtain greater sensitivity, it was concluded that determination of the amount of NO metabolites in biological fluids using MCE is possible.     

Determination of inorganic anions in human saliva by zwitterionic micellar capillary electrophoresis

Capillary electrophoresis (CE) using sulfobetaine-type zwitterionic micelles as the background electrolyte (BGE) has been used to determine inorganic anions in human saliva. The zwitterionic micelles resulted in unique migration behavior for the separation of inorganic anions. They also prevented adsorption of proteins on the inner wall of the capillary. These properties of the zwitterionic micelles enabled the direct determination of inorganic anions in human saliva. Three species of inorganic anions, NO2-, NO3-, and SCN-, were found in real samples and the analysis was achieved within 3 min. Direct UV-absorption was used as the detection method and the detection limits for these anions were 2.0, 1.0, and 5.0 micromol L(-1), respectively (0.09, 0.06, and 0.30 microg mL(-1)).     

Quantitative analysis of thiols in consumer products on a microfluidic CE chip with fluorescence detection

A microchip CE-based method for the quantification of the thiols mercaptoethanoic acid (MAA) and 2-mercaptopropionic acid (2-MPA) in depilatory cream and cold wave lotions was developed. The thiols were first derivatized with the fluorogenic reagent ammonium-7-fluorobenzo-2-oxa-1,3-diazole-4-sulfonate (SBD-F). The derivatives were separated within only 20 s by microchip CE and detected by their fluorescence. Conventional CE with diode array detection and LC with fluorescence detection were used for validation. The internal standard 3-mercaptopropionic acid (3-MPA) provided RSDs of multiple injections of only 4% or less for the MCE approach. LOD is 2 microM, LOQ 6 microM, and the linear range comprises nearly three decades of concentration starting at the LOQ.     

Determination of inorganic anions in biological fluids with direct sample injection by electrostatic ion chromatography using zwitterionic micelles in both stationary and mobile phases

A new ion chromatographic (IC) system, which uses zwitterionic (e.g., Zwittergent 3-14) micelles as both stationary and mobile phases, highly useful for the analysis of inorganic anions in biological samples, was developed. The zwitterionic micellar stationary phase (which is obtained by immobilizing the zwitterionic surfactant on surfaces of the reversed-phase ODS) showed high ability to confine the elution bands of the large amount of SO4(2-) and Cl- to narrow zones. As a result, a base-line separation of NO2-, Br- and NO3- from SO4(2-) and Cl- is always achieved. The zwitterionic micellar mobile phase, (which is obtained by dissolving the zwitterionic surfactant with a suppressive electrolytic solution, e.g., aqueous NaHCO3 solution), on the other hand, showed high ability for rapid elution of proteins. The separation column is therefore always being cleaned up even after the protein-containing sample is directly injected. The zwitterionic micelles are also insensitive to conductivity detection, therefore either the suppressed or the non-suppressed conductivity detection method is applicable for detection of the analyte ions. Urine and serum were chosen as the model real samples and were analysed with direct sample injection; the results of successful determination of a number of inorganic anions (SO4(2-), Cl-, NO2-, Br- and NO3-) in both samples have demonstrated the usefulness of this new IC system.     

Application of dodecyldimethyl (2-hydroxy-3-sulfopropyl) ammonium in wall modification for capillary electrophoresis separation of proteins

A zwitterionic surfactant, dodecyldimethyl (2-hydroxy-3-sulfopropyl) ammonium (C12H25N+(CH3)2CH2CHOHCH2SO3-), named dodecyl sulfobetaine (DSB), was used as a novel modifier to coat dynamically capillary walls for capillary electrophoresis separation of basic proteins. The DSB coating suppressed the electroosmotic flow (EOF) in the pH range of 3-12. At high DSB concentration, the EOF was suppressed by more than 8.8 times. The DSB coating also prevented successfully the adsorption of cationic proteins on the capillary wall. Anions, such as Cl-, Br-, I-, SO4(2-), CO3(2-), and ClO4-, could be used as running buffer modifiers to adjust the EOF for better separation of analytes. Using this dynamically coated capillary, a mixture of eight inorganic anions achieved complete separation within 4.2 min with the efficiencies from 24,000 to 1,310,000 plates/m. In the presence of ClO4- as EOF adjustor, the separation of a mixture containing four basic proteins (lysozyme, cytochrome c, alpha-chymotrypsinogen A, and myoglobin) yielded efficiencies of 204,000-896,000 plates/m and recoveries of 88%-98%. Migration time reproducibility of these proteins was less than 0.5% relative standard deviation (RSD) from run to run and less than 3.1% RSD from day to day, showing promising application of this novel modifier in protein separation.     

Ion chromatography on-chip

On-chip separation of inorganic anions by ion-exchange chromatography was realized. Micro separation channels were fabricated on a silicon wafer and sealed with a Pyrex cover plate using standard photolithography, wet and dry chemical etching, and anodic bonding techniques. Quaternary ammonium latex particles were employed for the first time to coat the separation channels on-chip. Owing to the narrow depths of the channels on the chip, 0.5-10 microm, there were more interactions of the analytes with the stationary phase on the chip than in a 50-microm I.D. capillary. With off-chip injection (20 nl) and UV detection, NO2-, NO3-, I-, and thiourea were separated using 1 mM KCl as the eluent. The linear ranges for NO2- and NO3- are from 5 to 1000 microM with the detection limits of 0.5 microM.     

Development of packed-column suppressor system for capillary ion chromatography and its application to environmental waters

A novel suppressor unit for capillary ion chromatography was designed to reduce the background conductivity and at the same time to increase the analyte signal. Regeneration of the suppressor was carried out on-line by passing an appropriate acidic solution through the column to displace the accumulated eluent cations. By using two 6-port microswitching valves and two packed capillary column suppressors, the background conductivity of sodium carbonate-bicarbonate mobile phase was maintained at low conductivity for continuous chromatographic runs, and the detection limits at low ppb levels were achieved. The relative standard deviations (RSDs) for the retention time, peak area and peak height of six common inorganic anions (0.05mM each of F(-), Cl(-), NO(2)(-), Br(-), NO(3)(-) and SO(4)(2-)) were between 0.5-0.9, 1.1-4.6 and 0.7-4.9%, respectively. The present system was successfully applied to the determination of inorganic anions in river water and tap water samples.     

Enhanced detection of porphyrins by capillary electrophoresis-laser induced fluorescence

A highly sensitive technique for the analysis of urinary porphyrins using capillary electrophoresis (CE) coupled with laser-induced fluorescence (LIF) detection is reported. Separation of mesoporphyrin IX, coproporphyrin, uroporphyrin and the penta-, hexa- and heptacarboxylic acid porphyrins was achieved in 11 min using a 10 mM 2-(N-cyclohexylamino)ethanesulfonic acid (CHES, pH 10) -75 mM sodium dodecyl sulfate (SDS) buffer. Migration time and peak area repeatability were less than 1 and 5% relative standard deviation (RSD), respectively. Limits of detection of 20 pM (2 x 10(-11) M) were achieved employing the recently introduced Nichia violet diode laser for excitation at 400 nm. This represents an enhancement in sensitivity of over two orders of magnitude compared to previous reports. This high sensitivity for urinary porphyrins was demonstrated through the quantification of coproporphyrin and uroporphyrin in urine samples after up to a 100-fold dilution.     

Two-step liquid phase microextraction combined with capillary electrophoresis: A new approach to simultaneous determination of basic and zwitterionic compounds

In this work, two-step hollow fiber-based liquid-phase microextraction procedure was evaluated for extraction of the zwitterionic cetirizine (CTZ) and basic hydroxyzine (HZ) in human plasma. In the first step of extraction, the pH of sample was adjusted at 5.0 in order to promote liquid-phase microextraction of the zwitterionic CTZ. In the second step, the pH of sample was increased up to 11.0 for extraction of basic HZ. In this procedure, the extraction times for the first and the second steps were 30 and 20 min, respectively. Owing to the high ratio between the volumes of donor phase and acceptor phase, CTZ and HZ were enriched by factors of 280 and 355, respectively. The linearity of the analytical method was investigated for both compounds in the range of 10-500 ng mL(-1) (R(2) > 0.999). Limit of quantification (S/N = 10) for CTZ and HZ was 10 ng mL(-1) , while the limit of detection was 3 ng mL(-1) for both compounds at a signal to noise ratio of 3:1. Intraday and interday relative standard deviations (RSDs, n = 6) were in the range of 6.5-16.2%. This procedure enabled CTZ and HZ to be analyzed simultaneously by capillary electrophoresis.     

On-column complexation of metal ions using 2,6-pyridinedicarboxylic acid and separation of their anionic complexes by capillary electrophoresis with direct UV detection

On-column complexation of metal ions with 2,6-pyridinedicarboxylate (2,6-PDC) to form anionic complexes enabled their separation by capillary zone electrophoresis with direct UV detection at 214 nm. Nine metal ions, Cu2+, Zn2+, Ni2+, Cd2+ Mn2+, Pb2+, Fe3+, Al3+ and Ca2+, were determined in less than 7 min using 10 mM 2.6-PDC solution containing 0.75 mM tetradecyltrimethylammonium bromide at pH 4.0. Satisfactory working ranges (20-300 microM), detection limits (3-10 microM) and good repeatability of the peak areas (RSD 2.1-4.2%, n=5) were obtained using hydrodynamic injection (30 s). The proposed method was used successfully for the determination of Mn2+, Fe3+, Al3+ and Ca2+ in groundwaters.     

Determination of oxoanions in river water by capillary electrophoresis

A new capillary electrophoresis (CE) procedure was developed for simultaneous determination of ten oxoanions (CrO4(2-), SeO4(2-), MoO4(2-), WO4(2-), VO4(3-), SeO3(2-), As04(3-), TeO3(2-), TeO4(2-), and AsO3(3-)) which were baseline-separated from each other and from the interfering UV absorbing anions (NO3- and NO2-) commonly found in environmental water samples. The new background electrolyte system developed contained 5 mM potassium phosphate and 0.007 mM octadecyltrimethylammonium hydroxide, pH 11.2. The optimized working conditions were electrokinetic sampling at -5 kV for 10 s, running voltage at -15 kV with 5 microA current, and detection wavelength at 205 nm. No interference was observed for non-UV-absorbing anions and UV-absorbing anions up to 20 and 10 times higher concentrations respectively. The speed of analysis was fast, with a complete CE run within 6 min. Wide linear ranges (1-2,000 microg/L), good repeatability in migration time (relative standard deviation RSD 0.55-2.8%), satisfactory precision in peak area (RSD 3.8-5.6%) and peak height (RSD 3.9-5.3%) measurement, and detection limits (1-25 microg/L) sufficiently sensitive to detect oxoanions found in environmental water samples were obtained. The reliability of the CE procedure developed had been established by recovery test and parallel method determination using atomic absoprtion spectrophotometry for real river water sample.     

新型共聚物涂层毛细管电泳柱及其分离蛋白质的研究

 研究新型共聚物——ＺＢ系列表面键合剂在毛细管电泳中的应用。采用物理吸附的方法制备了ＺＢ－００４,ＺＢ－０１４,ＺＢ－０１６等３种涂层毛细管柱,在ｐＨ３～５范围内,３种涂层均能有效地降低管壁对蛋白质的吸附作用和电渗流,其中亲水性较弱的ＺＢ－００４涂层的分离性能最好。在ｐＨ＜５时,涂层具有较高的稳定性和良好的分析重复性,但在更高的ｐＨ值条件下,仍然存在着峰形畸变和电渗流迅速增加的现象。     

High-performance capillary zone electrophoretic assay for markers of diabetic nephropathy in plasma and urine

A new high-performance capillary zone electrophoretic assay for creatine (Cr), creatinine (Cn), urea (U) and uric acid (Ua), markers of human diabetic nephropathy, both in plasma and urine has been developed with UV detection at 200 nm. The plasma sample was deproteinized with trichloroacetic acid and centrifuged at 10 000 rpm for 10 min. The urine sample was diluted 20-fold with buffer before analysis. The optimum separation conditions for the markers was investigated with respect to the concentration of the buffer, the pH, the voltage and the capillary temperature. Baseline separation was achieved in 25 mmol/L phosphate buffer (pH 3.45) using a 21 cm x 75 microm I.D. fused-silica capillary at 40 degrees C with an electric field of 1190 V/cm. The calibration curves showed good linearity in the range 3.5-1000, 0.18-700, 500-5000 and 2-800 microM (r2 min > 0.998) for Cr, Cn, U and Ua, respectively. The proposed method also has a high reproducibility (peak area RSD max < 3%) and has been successfully applied to the determination of clinical samples.     

Determination of nitrate and nitrite in rat brain perfusates by capillary electrophoresis

A fast and simple method for the direct, simultaneous detection of nitrite (NO(2) (-)) and nitrate (NO(3) (-)) in rat striatum has been developed using a capillary electrophoresis separation of low-flow push-pull perfusion samples. The method was optimized primarily for nitrite because nitrite is more important physiologically and is found at lower levels than nitrate. We obtained a complete separation of NO(2) (-) and NO(3) (-) in rat striatum within 1.5 min. Optimal CE separations were achieved with 20 mM phosphate, 2 mM cetyltrimethylammonium chloride (CTAC) buffer at pH 3.5. The samples were injected electrokinetically for 2 s into a 40 cm x 75 microm ID fused-silica capillary. The separation voltage was 10 kV (negative polarity), and the injection voltage was 16 kV (negative polarity). UV detection was performed at 214 nm. The limits of detection obtained at a signal-to-noise ratio (S/N) of 3 for nitrite and nitrate were 0.96 and 2.86 microM. This is one of the fastest separations of nitrite and nitrate of a biological sample ever reported. Interference produced by the high physiological level of chloride is successfully minimized by use of CTAC in the run buffer.     

Suppressed electrostatic ion chromatography with tetraborate as eluent and its application to the determination of inorganic anions in snow and rainwater

Tetraborate is investigated as the eluent ion for suppressed electrostatic ion chromatography (EIC) using a zwitterionic stationary phase. Good separation of a range of inorganic anions (SO4(2-), Cl-, NO3-, Br-, NO3-, ClO3-, and I-) was obtained, with detection limits for highly conducting ions (SO4(2-), Cl-, NO2-, Br- , and NO3-) being less than 8 x 10(-8) M, and for weakly conducting anions (ClO3- and I-) being 2.7 x 10(-7) and 5.8 x 10(-7) M, respectively. Calibration curves were linear up to 1.8 mM of each analyte. Retention times were found to increase with increasing eluent concentration and a linear relationship was observed between log k' and log[Na2B4O7] for all analytes. This behaviour is attributed to the progressive formation of a binary electrical double layer at the surface of the zwitterionic stationary phase. Retention times of analytes could be manipulated by varying the concentration of the eluent. This new suppressed-EIC system was applied to the determination of inorganic anions (SO4(-2) , CI-, NO3-, NO2-, and Br-) in snow and rainwater samples.     

Determination of carbethopendecinium bromide in eye drops by capillary electrophoresis with capacitively coupled contactless conductivity detection

Antiseptic agent carbethopendecinium bromide (septonex) was determined by capillary electrophoresis with capacitively coupled contactless conductivity detection. Optimal separation of this quaternary ammonium ion was achieved in BGE of pH 7.0 containing 30 mM 2-(N-morpholino)ethanesulfonic acid, 12.5 mg/mL of 2-hydroxypropyl-β-cyclodextrin and 20% v/v of acetonitrile. The separation was performed at 25°C in an uncoated fused silica capillary (50 μm id; total length, 60.5 cm; effective length, 50 cm) at 30 kV. Samples were injected hydrodynamically at 50 mbar for 6 s. For quantitative analysis, L-arginine (500 μg/mL) was used as internal standard. The calibration curve was rectilinear for 25-400 μg/mL of septonex (y=0.0113x-0.0063; r(2)=0.9992). The LOD was 7 μg/mL of septonex (at S/N=3). The run-to-run repeatability (n=6) was characterized by the RSDs of 0.18% for the migration time and 1.96% for the analyte/internal standard peak area ratio. Accuracy tested by recovery experiments at three concentration levels gave recoveries of 100.27-104.22% with RSD ≤2.19%. The method was successfully applied to the assay of carbethopendecinium bromide in eye drops. Quaternary ammonium ions having structure and size close to that of carbethopendecinium may not be resolved from the analyte.     

Use of 1-alkyl-3-methylimidazolium-based ionic liquids as background electrolytes in capillary electrophoresis for the analysis of inorganic anions

Separation of inorganic anions in CE is often a challenging task because the electrophoretic mobilities of inorganic anions are comparable to or even greater than the EOF mobility. In this study, we present the use of ionic liquids (ILs) as background electrolytes (BGEs) in CE of inorganic anions. The 1-alkyl-3-methylimidazolium-based ILs as BGEs dynamically coated the capillary wall and induced a reversed EOF. This allowed the anions to comigrate with the EOF and yielded a rapid separation. Increasing the alkyl chain length of the ILs and BGE concentration can significantly improve the separation resolution. With 40 mM 1-butyl-3-methylimidazolium tetrafluoroborate as BGE, good separations of five model anions (Br-, I-, NO2(-), NO3(-), and SCN-) were achieved in a range of buffer pH values. The separation efficiency was as high as 34 600-155 000, and the RSDs of the migration times were less than 0.8% (n = 5).     

Assay of glutathione in must and wines using capillary electrophoresis and laser-induced fluorescence detection. Changes in concentration in dry white wines during alcoholic fermentation and aging

Glutathione (GSH) was assayed in must and wine using capillary electrophoresis coupled with laser-induced fluorescence (LIF) detection. Sample preparation involved conjugating thiols with monobromobimane (MBB) in a 2-(N-cyclohexylamino)ethanesulfonic acid [CHES] buffer (179mM). The electrophoretic conditions were 30kV with a capillary length of 105cm from the inlet to the detector (120cm total length) and a 50microm inner diameter. Under these conditions, the complete separation from the other main non-volatile thiols took less than 20min. We also described the optimum conditions for derivatizing wine samples with MBB to increase eletrophoretic sensitivity. The detection limit for glutathione assay is 65nmol/L. This simple, sensitive method provides a specific assay of glutathione in reduced form, as the sample preparation technique does not modify the balance of oxidized and reduced forms. We used this method to monitor changes in the reduced glutathione content of a white wine during alcoholic fermentation and barrel aging.     

Single cell determination of nitric oxide release using capillary electrophoresis with laser-induced fluorescence detection

Measurements of nitric oxide (NO) release at single cell level are fundamental to understand the diverse physiological functions of this remarkable molecule. To achieve this purpose, capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) was originally described for the sensitive determination of NO release in individual neuron and mammalian cell after 8-(3,4-diaminophenyl)-2,6-bis(2-carboxyethyl)-4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene (DAMBO-P(H)) was chosen as the fluorescent probe. Various parameters affecting NO trapping in vivo and CE separation were systematically studied. Under the optimal conditions, complete and fast separation of the resulted targeted high-fluorescent triazole (DAMBO-P(H)-T) was achieved in about 3 min (2.89 min), and the relative standard deviations (RSDs) values of migration time and peak area were less than 5% and 9% for intra-day and inter-day assays, respectively. The detection limit was 42 amol (at a signal-to-noise ratio of 3). The feasibility of application of the developed method was validated by successfully applied to the measurements of NO release from four single cell study models. This original application of this method in diverse samples represents a powerful tool to study the kinetics of NO release by neuronal cells during neurotransmission, as well as for the understanding of the pathobiological and therapeutic basis of this molecule for cardiovascular diseases and under oxidative stress.