Enantiomeric separation of R,S-naproxen by conventional and nano-liquid chromatography with methyl-beta-cyclodextrin as a mobile phase additive

Chiral separations of R,S-naproxen mixtures were obtained on an achiral column (ODS) with methyl-beta-cyclodextrin as a mobile phase additive using conventional and nano-LC. The optimised mobile phase composition was 20 mmol l(-1) methyl-beta-cyclodextrin, 20% (v/v) acetonitrile, and 50 mmol l(-1) sodium acetate buffer at pH 3 using hydrochloric acid for pH adjustment. In addition to UV detection at 232 nm, amperometric detection was also investigated. Without using any internal standard, the reproducibility of amperometric detection (+1.05 V vs. Ag/AgCl) over a long analysis cycle in LC was greatly improved by choosing the peak area ratio between R- and S-naproxen as the analytical readout (the relative standard deviation was 2.11%) and enantiomeric purity could be assessed directly. This method was successfully employed for enantiomeric purity assessment in commercial naproxen tablets. Finally, successful transfer from conventional LC to nano-LC was realised, resulting in over 1000-fold reduction in reagent consumption.     

Rapid fabrication of microfluidic devices in poly(dimethylsiloxane) by photocopying

A very simple and fast method for the fabrication of poly(dimethylsiloxane) (PDMS) microfluidic devices is introduced. By using a photocopying machine to make a master on transparency instead of using lithographic equipment and photoresist, the fabrication process is greatly simplified and speeded up, requiring less than 1.5 h from design to device. Through SEM characterization, any micro-channel network with a width greater than 50 microm and a depth in the range of 8-14 microm can be made by this method. After sealing to a Pyrex glass plate with micromachined platinum electrodes, a microfluidic device was made and the device was tested in FIA mode with on-chip conductometric detection without using either high voltage or other pumping methods.     

Study of structural and electronic transport properties of Ce-doped LaMnO3

The structural and electronic transport properties of La_1−x Ce _x MnO₃ (x=0.0–1.0) have been studied. All the samples exhibit orthorhombic crystal symmetry and the unit cell volume decreases with Ce doping. They also make a metal-insulator transition (MIT) and transition temperature increases with increase in Ce concentration up to 50% doping. The system La_0.5Ce_0.5MnO₃ also exhibits MIT instead of charge-ordered state as observed in the hole doped systems of the same composition.     

Ion chromatography on-chip

On-chip separation of inorganic anions by ion-exchange chromatography was realized. Micro separation channels were fabricated on a silicon wafer and sealed with a Pyrex cover plate using standard photolithography, wet and dry chemical etching, and anodic bonding techniques. Quaternary ammonium latex particles were employed for the first time to coat the separation channels on-chip. Owing to the narrow depths of the channels on the chip, 0.5-10 microm, there were more interactions of the analytes with the stationary phase on the chip than in a 50-microm I.D. capillary. With off-chip injection (20 nl) and UV detection, NO2-, NO3-, I-, and thiourea were separated using 1 mM KCl as the eluent. The linear ranges for NO2- and NO3- are from 5 to 1000 microM with the detection limits of 0.5 microM.     

Two connected inverse spectral transforms

We establish a transformation which connects the potentials of the one-dimensional Dirac and Klein-Gordon operators. This transformation links the solutions of the nonlinear evolution equations solvable by means of the two inverse spectral transforms which use the Dirac and Klein-Gordon direct and inverse spectral problems.