对羟基苯甲酸／聚对苯二甲酸丁二酯共聚酯的热行为及液晶性

采用差示扫描量热仪和热台偏光显微镜研究了对羟基苯甲酸（ＰＨＢ）／聚对苯二甲酸丁二酯（ＰＢＴ）共聚酯的热转变行为和液晶性。结果表明，ＰＨＢ／ＰＢＴ共聚酯呈现多重相转变特征，这与共聚酯中存在不同程度的ＰＢＴ富微区和ＰＨＢ富微区有关；当ＰＨＢ链节含量在２０％～８０％范围时，共聚酯均呈现向列型液晶特征．     

液晶嵌段共聚物PET/60PHB-b-PC的合成及结构与性能

采用ＰＥＴ齐聚物的原位乙酰化法通过加入少量乙二醇（ＥＧ）合成了端羟基液晶聚合物ＰＥＴ／６０ＰＨＢ，并将其作为大单体，与双酚Ａ及碳酸二苯酯通过熔融酯交换法，进一步制得了液晶嵌段共聚物ＰＥＴ／６０ＰＨＢ ｂ ＰＣ．研究了合成规律，并借助粘度测定、ＤＳＣ、偏光显微镜、Ｘ 光衍射和红外光谱分析等手段对合成的液晶嵌段共聚物进行了表征．研究表明，当ＰＥＴ齐聚物的ηｉｎｈ＝００５～００７ｄＬ／ｇ，Ａｃ２Ｏ／ＰＨＢ（ｍｏｌ／ｍｏｌ）＝１３，ＥＧ／ＰＥＴ（ｍｏｌ／ｍｏｌ）＝００６时能获得颜色、液晶性、溶解性均很好的端羟基液晶聚合物ＰＥＴ／６０ＰＨＢ，以此液晶聚合物为原料，采用合适的配方与工艺，能获得粘度较高、液晶性较好，并且熔体流动性很好的液晶嵌段共聚物ＰＥＴ／６０ＰＨＢ ｂ ＰＣ．通过偏光显微镜与Ｘ 光衍射观察，证明此嵌段共聚物呈现向列型液晶织构，但其液晶态织构与纯ＰＥＴ／６０ＰＨＢ、ＰＥＴ／６０ＰＨＢ和ＰＣ的混合物明显不同．此外，还初步建立了用红外的分析手段鉴定液晶聚合物ＰＥＴ／６０ＰＨＢ端基的方法．     

混合液晶与尼龙1010三元共混物的研究

采用ＤＣＳ、ＰＯＭ、ＳＥＭ及力学性能测试，研究了不同对羟基苯甲醛和对苯二甲酸乙二醇酯含量的液晶共聚酯ＰＥＴ４０／ＰＨＢ６０（ＬＣＰ１）和ＰＥＴ３０／ＰＨＢ７０（ＬＣＰ２）的共混物与尼龙１０１０为基体的三元混体系。结果表明，液晶共混物的力学性能比单组分有明显提高，通过改变混合液晶中两组分的含量可调节其加工温度与粘度，从而满足了与尼龙１０１０共混的加工窗口要求。混合液晶的加入对尼龙１０１０的结晶与熔融     

芳香族热致液晶聚（对羟基苯甲酸—对苯二甲酸双酚A酯）的流变性能

用Ｉｎｓｔｒｏｎ３２１１型毛细管流变仪研究了以对羟枯苯甲酸、对苯二甲酯和双酚为单体合成的共聚芳酯液晶熔体的流变性能。结果表明，切变速率、熔体温度及ＰＨＢ链节含量对切粘度和结构粘度有很大的影响。     

热致性液晶共聚酯的剪切流变行为

采用毛细管及锥板流变仪对ＰＥＴ／ＰＨＢ系液晶共聚酯ＬＣＰ８０的剪切流变行为进行了系统的研究，发现在较低剪切速率下ＬＣＰ８０即出现剪切烯化现象，因此在通常的加要剪切速率范围下粘度非常低；当温度大于３００℃后粘流活化能减小，粘度的温度依赖性明显减弱；由于过冷现象热史影响其流动曲线，并且经预剪切后粘度显著下降；在较低剪切速率下第一法向应力差出现负值，并开始表现出明显的弹性效应。     

低分子量芳香族热致液晶聚（对羟基苯甲酸－对苯二甲酸双酚A酯）的研究

借酯交换反应，以对羟基苯甲酸、对苯二甲酸和双酚Ａ为单体通过淤浆聚合制备出６个低分子量芳香族热致液晶样品，即ＰＨＢＡ／ＴＰＡ／ＢＰＡ共聚酯．由于此单体含量不同的共聚酯样品在适当的溶剂中有较好的溶解性，故能进行许多表征．根据实验结果还得到了表示转变温度一组成关系的相图，并进行了讨论．     

低分子量芳香族热致液晶聚（对羟基苯甲酸－对苯二甲酸双酚A酯）的研究

 借酯交换反应，以对羟基苯甲酸、对苯二甲酸和双酚Ａ为单体通过淤浆聚合制备出６个低分子量芳香族热致液晶样品，即ＰＨＢＡ／ＴＰＡ／ＢＰＡ共聚酯．由于此单体含量不同的共聚酯样品在适当的溶剂中有较好的溶解性，故能进行许多表征．根据实验结果还得到了表示转变温度一组成关系的相图，并进行了讨论．     

含二羟基二苯酮系列热致液晶共聚酯的合成与表征──Ⅱ．含4，4＇－二羟基二苯酮，对苯二甲酸，对羟基苯甲酸，间苯二酚的共聚酯

采用直接熔融缩聚及固相聚合方法由４，４’－二羟基二苯酮（ＢＨＰ），对苯二甲酸（ＴＰ），对羟基苯甲酸（ＰＨＢＡ），间苯二酚（ＲＥＳ）成功地合成了四元共聚酯高分子，该聚酯的组成结构及性质由偏光显微镜、广角Ｘ－射线衍射、ＤＳＣ等手段进行表征，结果表明共聚酯具有向列型液晶特征．     

含二羟基二苯酮系列热致液晶共聚酯的合成与表征——Ⅱ.含4,4‘—二羟…

采用直接熔融缩聚及固相聚合方法由４，４’－二羟基二苯酮（ＢＨＰ），对苯二甲酸（ＴＰＡ），对羟基苯甲酸（ＰＨＢＡ），间苯二酚（ＲＥＳ）成功地合成了四元共聚酯高分子，该聚酯的组成结构及性质由偏光显微镜、广角Ｘ－射线衍射、ＤＳＣ等手段进行表征，结果表明共聚酯具有向列型液晶特征。     

热致液晶共聚酯／含酚酞侧基聚芳醚砜共混物的流变行为研究

采用溶液共混制备耻不同比例的热致液晶共聚酯／含酚酞侧基聚芳醚砜共混物。利用锥板流变仪对共混体系的熔体流变性能进行了初步研究，测定了熔体粘度－温度、粘度－剪切速度的关系，结果表明该液晶聚合物能明显降低聚芳醚砜的熔体粘度。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.