钕, 铈掺杂的正极材料尖晶石型LiMn2O4的制备及性能

通过掺杂不同含量的Ｎｄ,Ｃｅ制备ＬｉＭｎ２－ｘＲＥｘＯ４（ＲＥ＝Ｃｅ,Ｎｄ;ｘ＝０,０．０５,０．１,０．１５,０．２）锂离子电池正极材料,研究稀土元素拓杂对尖晶石ＬｉＭｎ２Ｏ４正极材料电化学性质的影响。掺杂Ｎｄ,Ｃｅ后ＬｉＭｎ２Ｏ４正极材料更适合于锂离子的嵌入和脱出,电池的循环性能提高,但充放电容量随掺杂量的增加而下降。Ｘ射线光电子能谱分析表明掺杂Ｎｄ,Ｃｅ的ＬｉＭｎ２Ｏ４正极材料,其Ｍｎ＾４＋     

尖晶石构造LiCu0.5Mn1.5O4的合成及其在水溶液中对Li^＋的抽出／嵌入反应

尖晶石构造ＬｉＣｕ０．５Ｍｎ１．５Ｏ４的合成及其在水溶液中对Ｌｉ＋的抽出／嵌入反应董殿权钟杰柳敦雷刘亦凡＊（青岛化工学院化学工程系青岛２６６０４２）关键词尖晶石，Ｌｉ－Ｃｕ－Ｍｎ复合氧化物，合成，锂离子交换１９９７－０９－１７收稿，１９９７－１２－２...     

尖晶石LiMn2O4锂充放电池的电化学研究

本文报导尖晶石型ＬｉＭｎ２Ｏ４化合物的制备方法，用循环伏安法和交流阻抗技术研究了Ｌｉ／有机电解液／ＬｉＭｎ２Ｏ４电池的电化学行为，用分形理论首次考察和进一步讨论电极材料的阻抗行为随锂离子嵌入或脱嵌电极时的变化。     

柠檬酸络合法合成锂离子电池正极材料Li_(1 x)Mn_2O_4

90年代初 ,Ｓｏｎｙ技术能源公司首先使ＬｉＣｏＯ2 /Ｃ锂离子“摇椅”蓄电池[1]商品化 .但由于Ｃｏ价格较贵 ,生产成本高以及污染环境等缺点 ,限制了Ｃｏ的使用 .研究和开发用于锂离子电池作正极材料的有ＬｉＮｉＯ2 和ＬｉＭｎ2 Ｏ4 .ＬｉＮｉＯ2 的容量较高 ,毒副作用较小 ,受到人们重视 ,但是制备和纯化十分困难 .尖晶石型ＬｉＭｎ2 Ｏ4 [2 ,3]由于资源丰富 ,价格便宜 ,对环境污染小 ,已成为锂离子电池正极材料研究热点之一 .Ｌｉ1 ｘＭｎ2 Ｏ4 通常的制备方法是固相合成法 ,该法比较简单 ,但焙烧时间长、能耗高、粒度不均匀 .虽然用Ｐ…     

锂离子电池阴极材料尖晶石结构Li1＋xMn2—xO4的研究

本文报导尖晶石结构阴极材料Ｌｉ１＋ｘＭｎ２－ｘＯ４（Ｏ＜ｘ＜１）的制备方法，讨论温度及原料对合成材料的电化学特性的影响，用电化学及结构化学理论研究了化学计量尖晶石结构ＬｉＭｎ２Ｏ４中，过量锂占据晶格中锰的位置，对电池初始容量及循环寿命产生的影响．     

一些无机盐对甲烷的液相选择催化氧化

考察了无机盐Ｃｒ２（ＳＯ４）３，ＣｄＳＯ４，ＦｅＳＯ４，ＶＯＳＯ４，Ｃｅ（ＳＯ４）２，ＭｎＳＯ４，ＳｎＣｌ４和ＨｇＳＯ４在浓硫酸介质中对甲烷的催化活性，发现ＭｎＳＯ４，ＳｎＣｌ４和ＨｇＳＯ４对甲烷氧化有活性，在此基础上考察了ＨｇＳＯ４体系中气液体积比，温度，浓度，反应时间以及硫酸浓度地反应活性的影响，认为反应按亲电取代反应机理进行。     

四元交互体系Li~＋，Mg~（2＋）／Cl~－，SO_4~（2－）－H_2O

本文采用等温溶解平衡法研究了四元交互体系Ｌｉ＋，Ｍｇ２＋／ＣＩ－，ＳＯ－Ｈ２Ｏ２５℃的机关系和平衡液相的物化性质（密度、粘度、电导率、折光率和ｐＨ）．该体系２５℃有七个相区Ｌｉ２ＳＯ４·Ｈ２Ｏ，ＭｇＳＯ４·７Ｈ２Ｏ．ＭｇＳＯ４·６Ｈ２Ｏ．ＭｇＳＯ４·５Ｈ２Ｏ，ＭｇＣ１２，６Ｈ２Ｏ，ＬｉＣＩ．ＭｇＣｌ２．７Ｈ２Ｏ，ＬｉＣＩ·Ｈ２Ｏ，十一条单变量线，五个共饱点．其中ＬｉＣＩ·Ｈ２Ｏ＋ＬｉＣＩ·ＭｇＣｌ２·７Ｈ２Ｏ＋Ｌｉ２ＳＯ４·Ｈ２Ｏ为一致零变量点．与文献中的研究结果比较，我们得到两个新相区ＭｇＳＯ４·６Ｈ２Ｏ和ＭｇＳＯ４·５Ｈ２Ｏ．用经验和半经验公式计算了平衡液相的密度、折光率．由实验测定的溶解度数据求得了高锂浓度下的Ｐｉｔｚｅｒ参数．对该体系２５℃溶解度进行了理论计算复证．     

锂离子电池正负极材料研究进展

本文阐述了近年来锂离子电极材料的合成、结构以及性能等方面的发展状况。正极包插嵌锂的层状ＬｉｘＭＯ２和尖晶石型结构的ＬｉｘＭ２Ｏ４的过渡金属氧化物（Ｍ＝Ｃｏ,Ｍｎ,Ｖ）,负极材料包括石墨、焦碳、活性碳、低温热解碳以及金属氧化物等。     

纳米尖晶石型Co2MnO4的形成过程及其F-T反应性能

用溶胶凝胶法制备了尖晶石型Ｃｏ２ＭｎＯ４超细粒子，用ＤＴＡＴＧ，ＸＲＤ，ＴＥＭ，ＦＴＩＲ等手段研究了Ｃｏ２ＭｎＯ４超细粒子的形成过程，进而用反应评价结合ＸＲＤ，ＸＰＳ，ＢＥＴ比表面积测试研究了Ｃｏ２ＭｎＯ４催化剂的比表面积和表面结构与其ＦＴ反应性能间的关系．结果表明，Ｃｏ２ＭｎＯ４超细粒子可以在较低温度（２５０～３５０℃）下形成，并具有粒度小，分布均匀等特点．用该法制备的超细粒子Ｃｏ２ＭｎＯ４，其催化活性明显优于相同组成的大颗粒催化剂．     

Performance of Na_2WO_4－Mn／SiO_2 Catalyst for Oxidative Dehydrogenation of Ethane at High Space Velocity

ＰｅｒｆｏｒｍａｎｃｅｏｆＮａ２ＷＯ４┐Ｍｎ／ＳｉＯ２ＣａｔａｌｙｓｔｆｏｒＯｘｉｄａｔｉｖｅＤｅｈｙｄｒｏｇｅｎａｔｉｏｎｏｆＥｔｈａｎｅａｔＨｉｇｈＳｐａｃｅＶｅｌｏｃｉｔｙＬｉｕＹｕ，ＬｉｕＸｕｘｉａ，ＬｉＳｈｕｂｅｎ（ＳｔａｔｅＫｅｙＬａｂｏ...     

锂离子电池正极材料LiMn2-xCrxO4电化学性能的研究

针对尖晶石型LiMn2O4锂离子电池正极材料的容量衰减,提出了相应的抑制方法,所合成的LiMn2-xCrxO4(0相似文献   

Role of local and electronic structural changes with partially anion substitution lithium manganese spinel oxides on their electrochemical properties: X-ray absorption spectroscopy study

The electronic and local structures of partially anion-substituted lithium manganese spinel oxides as positive electrodes for lithium-ion batteries were investigated using X-ray absorption spectroscopy (XAS). LiMn(1.8)Li(0.1)Ni(0.1)O(4-η)F(η) (η = 0, 0.018, 0.036, 0.055, 0.073, 0.110, 0.180) were synthesized by the reaction between LiMn(1.8)Li(0.1)Ni(0.1)O(4) and NH(4)HF(2). The shift of the absorption edge energy in the XANES spectra represented the valence change of Mn ion with the substitution of the low valent cation as Li(+), Ni(2+), or F(-) anion. The local structural change at each compound with the amount of a Jahn-Teller Mn(3+) ion could be observed by EXAFS spectra. The discharge capacity of the tested electrode was in the order of LiMn(2)O(4) > LiMn(1.8)Li(0.1)Ni(0.1)O(4-η)F(η) (η = 0.036) > LiMn(1.8)Li(0.1)Ni(0.1)O(4) while the cycleability was in the order of LiMn(1.8)Li(0.1)Ni(0.1)O(4-η)F(η) (η = 0.036) ≈ LiMn(1.8)Li(0.1)Ni(0.1)O(4) > LiMn(2)O(4). It was clarified that LiMn(1.8)Li(0.1)Ni(0.1)O(4-η)F(η) has a good cycleability because of the anion doping effect and simultaneously shows acceptable rechargeable capacity because of the large amount of the Jahn-Teller Mn(3+) ions in the pristine material.     

锂电池正极材料LiMn2O4的改性与循环寿命

对ＬｉＭｎ２Ｏ４进行改性可有效提高其循环寿命。其中合成掺杂ＬｉＭｎ２Ｏ４的解决循环性能下降的最有效手段。本文在探讨改性ＬｉＭｎ２Ｏ４的结构与其循环性能关系的基础上讨论了掺杂离子的选择标准。     

Spectroscopic understanding of ultra-high rate performance for LiMn(0.75)Fe(0.25)PO4 nanorods-graphene hybrid in lithium ion battery

Comprehensive X-ray absorption near-edge structure spectroscopy at the C, O and Li K-edges and the Mn, Fe, and P L-edges of LiMn(0.75)Fe(0.25)PO(4) nanorods-graphene has been reported in great detail. Compared to that of free standing graphene and LiMn(0.75)Fe(0.25)PO(4), the intimate interaction between the nanorods and graphene via charge redistribution has been unambiguously confirmed. This interaction not only anchors the nanorods onto the graphene but also modifies its surface chemistry, both of which afford the nanorods-graphene hybrid an ultra-high rate performance in lithium ion batteries. Such knowledge is important for the understanding of hybrid nanomaterials for lithium ion batteries and allows rational design for further improvements in performance.     

喷墨打印制备LiMn2O4薄膜电极及其电化学性能

通过溶胶-凝胶法制备了尖晶石LiMn2O4. 用分散剂Lormar D, 经超声分散制得了含LiMn2O4粒子的打印“墨水”, 并使用计算机喷墨打印的方法制得LiMn2O4薄膜电极. 薄膜电极的厚度约为1.8 μm. 用XRD、TG-DTA、SEM、循环伏安、电化学阻抗谱和充放电等方法对材料和电极的性能进行了表征. 结果表明, 在较大电流100 μA·cm-2 (2C)的充放电情况下, 电极能保持好的稳定性,其首次放电容量为109 mAh·g-1, 充放电54次后, 其容量仍可保持97.4%, 为105 mAh·g-1, 这可归因于薄膜电极中尖晶石LiMn2O4的晶型完整, LiMn2O4粒子小以及稳定的超薄电极结构.     

Li_3PO_4包覆LiMn_2O_4正极材料的结构表征和电化学性能

采用共沉淀法在尖晶石LiMn2O4颗粒表面包覆Li3PO4.XRD、SEM研究结果表明,包覆后的材料仍为尖晶石结构,粒径均匀.电化学性能测试表明,Li3PO4包覆层的存在,减少了正极材料与电解液的直接接触,抑制了高温下电解液对LiMn2O4材料的侵蚀,从而有效改善了高温下材料的循环性能.在40℃时,包覆样品的比容量衰减率都低于未包覆样品,其中包覆1%Li3PO4的样品的初始比容量为110.4mAh/g,50次循环后比容量为84.1mAh/g.     

Volatile single-source molecular precursor for the lithium ion battery cathode

The first single-source molecular precursor for a lithium-manganese cathode material is reported. Heterometallic β-diketonate LiMn(2)(thd)(5) (1, thd = 2,2,6,6-tetramethyl-3,5-heptanedionate) was obtained in high yield by simple one-step solid-state reactions employing commercially available reagents. Substantial scale-up preparation of 1 was achieved using a solution approach. The crystal structure of the precursor contains discrete Li:Mn = 1:2 trinuclear molecules held together by bridging diketonate ligands. The complex is relatively stable in open air, highly volatile, and soluble in all common solvents. It was confirmed to retain its heterometallic structure in solutions of non-coordinating solvents. The heterometallic diketonate 1 was shown to exhibit clean, low-temperature decomposition in air/oxygen that results in nanosized particles of spinel-type oxide LiMn(2)O(4), one of the leading cathode materials for lithium ion batteries.     

Excitation energy dependence for the Li 1s X-ray photoelectron spectra of LiMn2O4.

The Li 1s XPS (X-ray Photoelectron Spectroscopy) spectra of LiMn2O4, which is one of the major positive-electrode materials in lithium-ion rechargeable batteries, and MnO2 as a reference material, were measured by a laboratory-type XPS spectrometer. The Li 1s peak was not observed in the spectra excited by the Mg Kalpha line (1253.6 eV), because the Li 1s peak overlapped the background of the Mn 3p peak of LiMn2O4. The photoionization cross section of Mn 3p was larger than that of Li 1s for Mg Kalpha excitation. Therefore, the XPS measurement of LiMn2O4 by soft X-ray synchrotron excitation was carried out at beamline BL-7B on NewSUBARU synchrotron facility. Excitation energies of 110, 120, 130, 140, 150 and 151.4 eV were selected. The Li 1s peak was clearly observed in these XPS spectra. In order to investigate the excitation energy dependence, the area ratio of the Li 1s and Mn 3p peaks in the XPS spectra was plotted against the excitation energy. As a result, when the excitation energy was 110 eV, the area ratio had the maximum value.     

锂离子交换剂制备及交换反应动力学

通过XRD分析、Li＋抽出率βLi及Mn2＋溶出率γMn的计算，考察了不同焙烧温度及抽锂剂对前驱体锂锰氧化物LiMn2O4结构及稳定性的影响.结果表明, 750 ℃下焙烧2 h，并使用过硫酸铵(NH4)2S2O8作抽锂剂，制备的Li＋交换剂MnO2(Li)对Li＋的交换容量αLi较大.另外，通过Li＋在固液两相间分配系数的测定及交换反应动力学实验，对离子交换反应机理进行了研究，并建立了有限浴条件下MnO2(Li)离子交换反应动力学模型.结果表明,该离子交换过程近似符合颗粒扩散控制；交换反应主要发生在交换剂颗粒外层；提出的动力学模型与实验结果符合较好.