钕, 铈掺杂的正极材料尖晶石型LiMn2O4的制备及性能

通过掺杂不同含量的Ｎｄ,Ｃｅ制备ＬｉＭｎ２－ｘＲＥｘＯ４（ＲＥ＝Ｃｅ,Ｎｄ;ｘ＝０,０．０５,０．１,０．１５,０．２）锂离子电池正极材料,研究稀土元素拓杂对尖晶石ＬｉＭｎ２Ｏ４正极材料电化学性质的影响。掺杂Ｎｄ,Ｃｅ后ＬｉＭｎ２Ｏ４正极材料更适合于锂离子的嵌入和脱出,电池的循环性能提高,但充放电容量随掺杂量的增加而下降。Ｘ射线光电子能谱分析表明掺杂Ｎｄ,Ｃｅ的ＬｉＭｎ２Ｏ４正极材料,其Ｍｎ＾４＋     

尖晶石LiMn2O4锂充放电池的电化学研究

本文报导尖晶石型ＬｉＭｎ２Ｏ４化合物的制备方法，用循环伏安法和交流阻抗技术研究了Ｌｉ／有机电解液／ＬｉＭｎ２Ｏ４电池的电化学行为，用分形理论首次考察和进一步讨论电极材料的阻抗行为随锂离子嵌入或脱嵌电极时的变化。     

尖晶石构造LiCu0.5Mn1.5O4的合成及其在水溶液中对Li^＋的抽出／嵌入反应

尖晶石构造ＬｉＣｕ０．５Ｍｎ１．５Ｏ４的合成及其在水溶液中对Ｌｉ＋的抽出／嵌入反应董殿权钟杰柳敦雷刘亦凡＊（青岛化工学院化学工程系青岛２６６０４２）关键词尖晶石，Ｌｉ－Ｃｕ－Ｍｎ复合氧化物，合成，锂离子交换１９９７－０９－１７收稿，１９９７－１２－２...     

锂离子电池LiMn2O4薄膜电极的制备研究进展

尖晶石ＬｉＭｎ２Ｏ４是最有希望替ＬｉＣｏＯ２的新一代锂离子电池阴极材料。高能、轻量、超薄将是未来锂离子电池一个十分重要的发展方向。本文对尖晶石ＬｉＭｎ２Ｏ４的晶体结构作了简要介绍。综述了近年来在ＬｉＭｎ２Ｏ４薄膜电极制备方面的研究进展,包括静电喷雾沉积（ＥＳＤ）、静脉激光沉积（ＰＬＣ）、射频磁溅射（ＲＦＭＳ）等等,并对今后的研究方向进行了展望。     

LiMn2O4正极在高温下性能衰退现象的研究

采用恒流充放电方法测量了温度升高导致ＬｉＭｎ２Ｏ４正极容量衰减的情况。发现当环境温度上升到５０℃时,ＬｉＭｎ２Ｏ４电极出现严重的容量损失和性能衰退,充电态的电极受影响的程度最为严重。对电解液的原子发射和红外光谱分析,电极晶相结构Ｘ－射线衍射及循环伏安实验速增加,电解液出现催化氧化是导致容量不可逆衰砬的原因。采用富锂尖晶石材料是抑制ＬｉＭｎ２Ｏ４高温性能下降的一种有效方法。     

锂嵌脱化合物LiMn2O4的微波烧结研究

本文用微波烧结法合成锂嵌脱材料ＬｉＭｎ２Ｏ４，研究了微波烧结功率，时间的固态产物相的影响，对ＬｉＭｎ２Ｏ４单相多晶粉末进行了ＸＲＤ，ＩＲＭ，ＸＰＳ，等离子体发射光谱及氧化还原等测试。     

Li—Ni—La—O系复合氧化物催化剂上甲烷氧化偶联的研究

考察了Ｌｉ－Ｎｉ－Ｌａ－Ｏ系催化剂的组成、结构及反应条件对甲烷氧化偶联反应活性的影响。在７８０℃、ＣＨ４：Ｏ２：Ｎ２＝２：１：７、空速１５０００ｈ＾－１时，Ｃ２烃收率可达２５．８％。ＸＲＤ、ＩＲ、ＸＰＳ及ＳＥＭ等的结构分析表明，在ＬｉＬａ１－ｘＮｉｘＯ２催化剂中，当０．１≤ｘ≤０．９时，该催化剂由ＬｉＮｉＯ２和Ｌａ２Ｎｉ１－ｙＬｉｙＯ４－λ两相组成，ｘ＜０．３时出现了ＬｉＬａＯ２相，Ｌａ２Ｎｉ１－     

一种可充电锂电池电极新材料的制备

一种可充电锂电池电极新材料的制备Ａｒｍｓｔｒｏｎｇ和Ｂｒｕｃｅ最近报道了一种与ＬｉＣｏＯ２结构相类似，可用于可充电锂电池电极材料的层叠式ＬｉＭｎＯ２的制备方法和它的电化学性能，其充电容量与类似的电极材料ＬｉＣｏＯ２及ＬｉＭｎｏ２可比拟，达２７０ｍＡｈ...     

锂电池正极材料LiMn2O4的改性与循环寿命

对ＬｉＭｎ２Ｏ４进行改性可有效提高其循环寿命。其中合成掺杂ＬｉＭｎ２Ｏ４的解决循环性能下降的最有效手段。本文在探讨改性ＬｉＭｎ２Ｏ４的结构与其循环性能关系的基础上讨论了掺杂离子的选择标准。     

非水介质中Zn—MnO2的可充性研究

报道了以尖晶石型二氧化猛为正极，１ｍｏｌ／Ｌ＾－１Ｚｎ（ＣｌＯ４）２的碳酸丙烯酯为电解液构成Ｚｎ－ＭｎＯ２二次电池体系的充放电性质和反应机理分析。结果表明，这一体系的充放电过程表现为Ｚｎ在λ－ＭｎＯ２中的电化学嵌入和脱嵌反应。     

锂在[Mn~2O~4]中的电化学嵌入反应I.热力学性质

锂嵌入[Mn~2O~4]晶格形成嵌合物Li~xMn~2O~4。通过对不同温度(20~45℃)下的Li/Li~xMn~2O~4电池的库仑滴定曲线[EmF(x)]的测定, 可以求得该嵌入过程的嵌入熵、焓和自由能等热力学函数。在x<1.5时, 表现为很高的偏摩尔自由能, 在x=1/2和x=1时, 嵌入熵和焓表现为不连续性。热力学函数值与Li~xMn~2O~4的晶体结构关联。     

纳米微晶TiO2合成Li4Ti5O12及其嵌锂行为

用溶胶-凝胶法并经热处理制备不同形态和晶体尺寸的TiO2，分别与Li2CO3高温固相反应生成锂钛复合氧化物，经电化学测试发现,用300 ℃热处理所得纳米微晶TiO2制备的Li4Ti5O12具有良好的嵌锂性能，其可逆比容量大于95 mA•h•g－1，充放电效率近100％，循环性能良好，电压平台平稳,在嵌锂至容量≥85％或脱锂至容量≥90％时均有明显的电压变化，可用作锂离子电池负极材料.     

Rechargeable LI2O2 electrode for lithium batteries

Rechargeable lithium batteries represent one of the most important developments in energy storage for 100 years, with the potential to address the key problem of global warming. However, their ability to store energy is limited by the quantity of lithium that may be removed from and reinserted into the positive intercalation electrode, Li(x)CoO(2), 0.5 < x < 1 (corresponding to 140 mA.h g(-1) of charge storage). Abandoning the intercalation electrode and allowing Li to react directly with O(2) from the air at a porous electrode increases the theoretical charge storage by a remarkable 5-10 times! Here we demonstrate two essential prerequisites for the successful operation of a rechargeable Li/O(2) battery; that the Li(2)O(2) formed on discharging such an O(2) electrode is decomposed to Li and O(2) on charging (shown here by in situ mass spectrometry), with or without a catalyst, and that charge/discharge cycling is sustainable for many cycles.     

锂离子二次电池锰系正极材料

综述了锂离子二次电池锰系正极材料的研究进展，侧重于阐述尖晶石型及层状锰酸锂的制备、结构与电化学性能之间的关系。     

锌掺杂提高LiNi1/3Co1/3Mn1/3O2正极材料的电化学稳定性

通过共沉淀法与固相法相结合制备了掺锌的高稳定性Li(Ni_1/3Co_1/3Mn_1/3)_1-xZn_xO₂ (x=0, 0.02, 0.05)正极材料. 循环伏安(CV)曲线表明Zn掺杂使氧化峰与还原峰的电势差减小到0.09 V, 电化学阻抗谱(EIS)曲线表明Zn掺杂使电极的阻抗从266 Ω减小到102 Ω. Li⁺嵌入扩散系数从1.20×10^-11 cm²·s^-1增大到 2.54×10^-11 cm²·s^-1. Li(Ni_1/3Co_1/3Mn_1/3)_0.98Zn_0.02O₂正极材料以0.3C充放电在较高的截止电压(4.6 V)下比其他两种材料的电化学循环性能更稳定, 其第二周的放电比容量为176.2 mAh·g^-1, 循环100周后容量几乎没衰减; 高温(55 °C)下充放电循环100周, 其放电比容量平均每周仅衰减0.20%, 远小于其他两种正极材料(LiNi_1/3Co_1/3Mn_1/3O₂平均每周衰减0.54%; Li(Ni_1/3Co_1/3Mn_1/3)_0.95Zn_0.05O₂平均每周衰减0.38%). Li(Ni_1/3Co_1/3Mn_1/3)_0.98Zn_0.02O₂正极材料以3C充放电时其放电比容量可达142 mAh·g^-1, 高于其他两种正极材料. 电化学稳定性的提高归因于Zn掺杂后减小了电极的极化和阻抗, 增大了锂离子扩散系数.     

锂离子电池电极材料研究进展

本文综述了锂离子电池中正、负电极材料的制备、结构与电化学性能之间的关系。正极材料包括嵌锂的层状L ixMO 2 和尖晶石型L ixM 2O 4 结构的过渡金属氧化物(M =Co、N i、M n、V ) , 负极材料包括石墨、含氢碳、硬碳和金属氧化物。侧重于阐述控制锂离子电池循环过程中可逆嵌锂容量和稳定性的嵌锂电极材料的结构性质。给出118 篇参考文献。     

锂离子电池掺钴正极材料电子结构的DV-Xα研究

The electronic structures of electrode material LiMn2O4 and Li5Mn7CoO8 for the lithium ion battery are studied by employing an ab initio “atomic-basis + norm-conserving non-local pseudopotentias” method. The calculation results of the electronic structure of an ode material LiMn2O4 show that the valence band of LiMn2O4 are mainly made up of 3d atomic orbtics of Mn(8) and Mn(9), and 2 p atomic orbits of O(7), O(6) and O(4), while the conduction band contains essentially 3d orbits of Mn (8) and Mn (9), and 2p atomic orbits of O(7). At the same time, the computing results of electronic structure of electrode material Li5Mn7CoO8 indicate that the reversible capacity of the electrode can decrease and discharge voltage reduces in the cycling, and the net charge of partial lithium ions of the active electrode material and the interaction between lithium ions and oxygen ions increase. While the cycling performance of the anode can improve due to the structural stabilization of the material Li5Mn7CoO8 corresponding to the decrease of the valence band width and enhancement of the Co-O bond.     

Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li0.2Mn0.6]O2

The cathode in rechargeable lithium-ion batteries operates by conventional intercalation; Li+ is extracted from LiCoO2 on charging accompanied by oxidation of Co3+ to Co4+; the process is reversed on discharge. In contrast, Li+ may be extracted from Mn4+-based solids, e.g., Li2MnO3, without oxidation of Mn4+. A mechanism involving simultaneous Li and O removal is often proposed. Here, we demonstrate directly, by in situ differential electrochemical mass spectrometry (DEMS), that O2 is evolved from such Mn4+ -containing compounds, Li[Ni(0.2)Li(0.2)Mn(0.6)]O2, on charging and using powder neutron diffraction show that O loss from the surface is accompanied by diffusion of transition metal ions from surface to bulk where they occupy vacancies created by Li removal. The composition of the compound moves toward MO(2). Understanding such unconventional Li extraction is important because Li-Mn-Ni-O compounds, irrespective of whether they contain Co, can, after O loss, store 200 mAhg(-1) of charge compared with 140 mAhg(-1) for LiCoO(2).     

Electrochemical performances of LiMnPO4 synthesized from non-stoichiometric Li/Mn ratio

In this paper, the influences of the lithium content in the starting materials on the final performances of as-prepared Li(x)MnPO(4) (x hereafter represents the starting Li content in the synthesis step which does not necessarily mean that Li(x)MnPO(4) is a single phase solid solution in this work.) are systematically investigated. It has been revealed that Mn(2)P(2)O(7) is the main impurity when Li < 1.0 while Li(3)PO(4) begins to form once x > 1.0. The interactions between Mn(2)P(2)O(7) or Li(3)PO(4) impurities and LiMnPO(4) are studied in terms of the structural, electrochemical, and magnetic properties. At a slow rate of C/50, the reversible capacity of both Li(0.5)MnPO(4) and Li(0.8)MnPO(4) increases with cycling. This indicates a gradual activation of more sites to accommodate a reversible diffusion of Li(+) ions that may be related to the interaction between Mn(2)P(2)O(7) and LiMnPO(4) nanoparticles. Among all of the different compositions, Li(1.1)MnPO(4) exhibits the most stable cycling ability probably because of the existence of a trace amount of Li(3)PO(4) impurity that functions as a solid-state electrolyte on the surface. The magnetic properties and X-ray absorption spectroscopy (XAS) of the MnPO(4)·H(2)O precursor, pure and carbon-coated Li(x)MnPO(4) are also investigated to identify the key steps involved in preparing a high-performance LiMnPO(4).