工业制备高效液相色谱法制备淫羊藿中的黄酮系列对照品

淫羊藿甙和朝藿定A、B、C是淫羊藿中重要的活性成分,本研究应用工业制备高效液相色谱从淫羊藿粗提物中分离制备了这4个成分。淫羊藿粗提物经大孔吸附树脂粗分离获得相应的组分后,利用工业制备高效液相色谱完成精制纯化。采用自装填Chromatorex C18制备柱(220 mm×77 mm, 10 μm),乙腈-水(26:74或30:70, v/v)为流动相进行洗脱,在35 min内,实现了这4种成分的基线分离及规模制备。从300 g粗提物(总黄酮含量约20%)中获得淫羊藿甙33 g、朝藿定C 4.6 g、朝藿定B 3.7 g和朝藿定A 0.6 g,产品纯度均达到98%以上。此方法通过两步分离即可实现这4种成分的完全分离,具有快速高效、产品纯度高的特点,适于淫羊藿中淫羊藿甙、朝藿定A、B、C系列对照品的规模制备。     

动态超声辅助萃取与HPLC联用测定淫羊藿中黄酮类化合物

建立了动态超声辅助萃取与高效液相色谱在线联用系统,用于测量淫羊藿中黄酮类化合物。萃取过程在一个循环体系中完成,萃取完成后,通过采样环采集20μL萃取液,萃取液被流动相载入色谱系统进行分离检测。4种黄酮类化合物用HPLC–MS区分,通过比较色谱峰面积选择优化萃取条件。选择50℃的水浴温度,50%的乙醇作为萃取剂,萃取剂流速为1.5 mL/min,萃取时间为8 min,样品量为15 mg。用该法测量淫羊藿样品中4种黄酮类化合物,日内、日间精密度分别为1.05%～2.05%,0.30%～3.63%(n=6)。淫羊藿中的主要化合物淫羊藿苷的加标回收率为95.2%。该方法可用于测量淫羊藿中的黄酮类化合物。     

朝藿甙－C的分离和结构

从朝鲜淫羊蕾的地上部分分离得到４个化合物。经化学和光谱方法鉴定它们为：５，７，３＇－三羟基－４＇－甲氧基－８－异戊烯基黄酮醇－３－Ｏ－α－Ｌ－鼠李吡喃糖甙（Ⅰ）、ＩｃａｒｉｓｉｄｅＣ１（Ⅱ）、Ｅｐｉｍｅｄｏｋｏｒｅａｎｏｓｉｄｅ－Ⅰ（Ⅲ）和Ｄｅｓｍｅｔｈｙｌｉｃａｒｉｔｉｎ（Ⅳ）。其中Ⅰ是未见报道的新化合物，命名为朝藿甙－Ｃ；Ⅱ、Ⅲ和Ⅳ首次从该植物中获得。     

HPLC法同时测定淫羊藿中朝藿定A、B、C与淫羊藿苷的含量

建立了同时测定淫羊藿中朝藿定A、B、C与淫羊藿苷含量的高效液相色谱方法。淫羊藿样品经超声波提取,以50%(φ)乙醇溶液为溶剂,在温度50℃、料液比1∶60条件下超声波提取30 m in,共提取2次。色谱条件:ZORBAX SB-C8色谱柱(5μm,4.6×250 mm);流动相A为乙腈,B为1%乙酸溶液;梯度洗脱;紫外检测波长为270 nm。上述4种类黄酮的标准曲线在6.6~33.0 mg/L(朝藿定A、淫羊藿苷)或6.6~55.0mg/L(朝藿定B、C)范围内呈良好的线性关系(r>0.99);加标回收率在97%~102%之间;相对标准偏差小于2%(n=5)。测得不同产地心叶淫羊藿叶片中4种类黄酮的质量分数差异较大;朝藿定A广泛分布于淫羊藿属中。本方法在淫羊藿药材质量控制中具有一定的参考价值。     

两种前处理方法对LC - MS/MS测定家兔血清中淫羊藿黄酮类化合物基质效应的影响

考察了两种前处理方法对采用液相色谱-串联质谱联用法( LC - MS/MS)测定家兔血清中淫羊藿黄酮类化合物时基质效应的影响.家兔空白血清分别以乙酸乙酯液-液萃取和C18小柱固相萃取,提取前、后各自加入一定浓度的4种淫羊藿黄酮类化合物的混合对照品溶液(淫羊藿苷、淫羊藿次苷I、淫羊藿次苷Ⅱ、淫羊藿素),评价家兔血清中淫羊...     

朝鲜淫羊藿中黄酮类化合物的高效液相色谱与电喷雾质谱联用研究

利用高效液相色谱与电喷雾质谱联用技术研究了朝鲜淫羊藿中的黄酮类化合物。实验采用反相C18色谱柱，二元线性梯度洗脱，分离并检测了朝鲜淫羊藿中的6种黄酮类化合物；通过与电喷雾质谱联用获得了这几种化合物的分子量信息，利用质谱的源内碰撞诱导解离技术对这几种化合物进行了结构鉴定。     

反相液相色谱对多肽的分离、纯化与制备

用反相高效液相色谱（RPLC）对两种化学合成多肽－－32肽和21肽进行了分离、纯化和制备。在用分析型RPLC色谱柱对多肽样品的制备过程中，对其进样量和洗脱梯度进行了选择。每次进样量为5mg，在最优化色谱条件下，用RPLC一步就可对21肽进行分离纯化，其纯度达到98.6%。而32肽由于样品组分更加复杂，RPLC一步纯化后其纯度仅有80％。通过对色谱分离条件的再次优化，对32肽进行二次分离纯化，纯度达杂，RPLC一步纯化后其纯度仅有80％。通过对色谱分离条件的再次优化，对32肽进行二次分离纯化，纯度达到96.4%。在其最优化条件下，通过多次样品收集和冷冻干燥，分别制备了高纯度的21肽和32肽各100mg。     

德钦乌头二萜生物碱成分研究

研究了乌头属植物德钦乌头(Aconitum ouvrardianum)根部二萜生物碱类化学成分。采用了柱色谱、重结晶方法进行分离纯化,根据理化性质及波谱学数据确定化合物结构。从中分离得到5个二萜生物碱,分别鉴定为黄草乌碱丁(Ⅰ)、异塔拉乌头定(Ⅱ)、塔拉萨敏(Ⅲ)、查斯曼宁(Ⅳ)和denudatine(Ⅴ)。化合物Ⅴ为首次从该植物中分离得到的C-20型二萜生物碱。     

皱叶香茶菜化学成分的研究

从采自西藏的皱叶香茶菜中分离鉴定了3对B-闭联对映贝壳杉烯型二萜化合物:二萜化合物皱叶香茶菜素(Ⅰ)和二氢皱叶香茶菜素(Ⅱ);isodocarpin(Ⅲ)和dihydroisodocarpin(Ⅳ)及Carpalasionin(Ⅴ)和dihydrocarpalasionin(Ⅵ)。(Ⅰ)、(Ⅲ)和(Ⅴ)分别与对应的二氢化合物(Ⅱ)、(Ⅳ)和(Ⅵ)以混合物的形式被分离和鉴定。化合物(Ⅱ)为新化合物,(Ⅰ)、(Ⅳ)和(Ⅵ)首次在自然界发现,(Ⅲ)和(Ⅴ)为已知化合物。     

炮制前后朝鲜淫羊藿化学成分的变化规律研究

采用电喷雾质谱技术、等离子体发射光谱技术以及紫外分光光度法分别对炮制前后朝鲜淫羊藿的化学成分进行了详细研究;结果表明,炮制后淫羊藿中与肾功能有密切关系的Ca、Mn、Fe、Mg、Zn等微量元素的含量明显增加,但黄酮类化合物的含量无明显变化,为进一步阐明淫羊藿炮制入药的科学内涵提供了实验依据。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.