负载Cu的镁铝复合金属氧化物催化合成碳酸丙烯酯

通过浸渍法制备了负载Cu的镁铝水滑石类化合物Cu/HT,经过450℃焙烧得到负载Cu的镁铝复合金属氧化物Cu/LDO,利用X射线衍射(XRD)、红外光谱(FTIR)分析等技术对催化剂的结构进行了表征。研究了其对尿素与1,2-丙二醇合成碳酸丙烯酯的催化性能。考察了反应温度、反应时间、催化剂用量等工艺条件对反应性能的影响。结果表明,以水滑石为前躯体的负载Cu的镁铝复合金属氧化物cu/LDO对尿素与1,2-丙二醇合成碳酸丙烯酯具有比较好的催化活性。当反应温度为170℃、1,2-丙二醇与尿素的摩尔比为4:1、催化剂用量为原料总质量的1.0%、反应时间为3h时,碳酸丙烯酯的收率达到95.2%。     

Cu对Zn1－xFexO稀磁半导体磁性的影响

采用水热法，在温度430 ℃，填充度35%，矿化剂为3 mol·L^-1KOH，前驱物为添加适量的FeCl₂·6H₂O的Zn(OH)₂，反应时间24h，合成了Zn_1-xFe_xO和Zn_1-xFe_xO：Cu稀磁半导体晶体.当在Zn(OH)₂中添加一定量的FeCl₂·6H₂O为前驱物，水热反应产物为掺杂Fe的Zn_1-xFe_xO多种形态晶体混合物，其个体较大的晶体中的Fe原子百分比含量为0.49%—0.52%.采用超导量子干涉磁强计测量了材料的磁性，晶体的磁化强度随温度下降而减小.在前驱物中同时加入适量比例的Cu化合物，合成了共掺杂Cu的Zn_1-xFe_xO：Cu，和Zn_1-xFe_xO相比，其室温下的磁化强度有明显的提高，且在室温下具有铁磁性. 关键词： 氧化锌 水热 稀磁半导体 晶体     

In2O3/CuO纳米异质结的制备和光催化性质研究

通过溶胶-凝胶结合静电纺丝过程制备了In₂O₃/CuO纳米异质结。XRD和Raman光谱的研究表明,随着前驱物中Cu/In比例的增加,CuO相的含量逐渐增加。吸收光谱研究表明,随着CuO含量的增加,复合纳米结构的可见光吸收明显增强。光催化实验研究结果表明,In₂O₃/CuO纳米异质结具有比单一相的In₂O₃和CuO更强的光催化性能,其主要来源于异质结所导致的增强的光生电子和空穴的分离效率。     

基于约束非平衡溶剂化理论的对硝基苯胺π-π*光谱移动 (cited: 1)

采用共沉淀法制备不同组分类水滑石前驱体Co-M-Al和Co-M-Ce-Al (M=Zn, Ni, Cu)复合氧化物催化剂催化分解N₂O. 结果表明,Co-M-Al系列氧化物催化剂的催化活性Co-Ni-Al系列>Co-Zn-Al系列>Co-Cu-Al系列;CeO₂添加使得催化剂催化活性进一步提高,N₂O分解温度T₅₀和T₉₀均下降80 oC;继续负载碱金属K也使氧化物催化剂催化活性提高,N₂O分解温度T₅₀和T₉₀下降约50 oC.     

单晶硅上化学气相沉积铜薄膜的机理研究

在自行设计、建立的MOCVD系统上,以Cu(hfac)2为反应前驱物在单晶硅上进行铜薄膜的化学气相沉积,并用AFM、SEM对铜核的成长机理进行了研究．结果表明,反应初期,单晶硅上铜核的成长为岛状,反应后期为先层状后岛状．利用XPS对铜薄膜成长的反应机理进行了探讨,由薄膜的Cu2p、Ols、Fls、Si2p谱可推论出,XPS谱中所出现的C=O、OH及CF3／CF2可能为Cu(hfac),当Cu(hfac)2在高温下分解成Cu(hfac)及hfac后,H2还原表面的hfac生成OH基,反应进行一段时间,OH基浓度大到一定的程度后,与Cu(hfac)2热裂解产生的hfac作用生成HO-hfac并脱附,使表面的铜的氧化物被还原以及发生Cu(hfac)2与H2的氧化还原反应．     

Mn-Cu合金成分对去合金化法制备纳米多孔铜的影响

 采用电弧熔炼制备出前驱体Mn-Cu合金,在稀盐酸溶液中自由腐蚀去合金化,制备出具有双连续结构的纳米多孔铜。研究了前驱体合金的成分对纳米多孔铜微观结构及Mn的选择性腐蚀程度的影响。结果表明：前驱体Mn-Cu合金的Cu原子分数为43%时,其去合金化受到抑制,存在明显的未完全去合金化的岛状结构;前驱体Mn-Cu合金的Cu原子分数为32%～23%时,可完全去合金化,形成平均孔径尺寸为20～100 nm,平均系带尺寸为30～80 nm,具有双连续结构的纳米多孔铜;前驱体Mn-Cu合金的Cu原子分数低至20%时,去合金化后存在大量裂纹,形成纳米颗粒聚集体。纳米多孔铜中存在少量的残余Mn,残余Mn的原子分数随着前驱体合金Mn原子分数的增高而降低。实验表明腐蚀液浓度对纳米多孔铜形貌也存在影响。     

异质结型CuO/ZnO复合纳米线的制备及光催化性能

在室温下,通过溶液法在Cu衬底上制备了CuO纳米线,然后采用溶剂热法在CuO纳米线表面生长ZnO纳米颗粒以构建CuO/ZnO复合纳米线异质结构.利用扫描电镜、透射电镜、X射线衍射仪和X射线光电子能谱分析了样品的形貌、结构和元素组成.结果显示CuO/ZnO复合纳米线由ZnO纳米颗粒和CuO纳米线组成.在模拟太阳光照射下,...     

在氧-水蒸气存在下单相Sr2(Gd,Ce)2Cu2RuO10的合成及其电学性质

传统固相反应所合成的锶系钌铜氧化物,通常总伴有少量铁磁性SrRuO3杂相.采用氧(或空气)-水蒸气混合气氛下的新型固相反应,既能成功合成锶系钌铜氧化物的前驱物纯相Sr2GdRuO6(211相), 也能进一步在相对低的温度下成功合成锶系钌铜氧1222纯相化合物RuSr2(Gd,Ce)2Cu2O10 (Ru-1222),使其中SrRuO3杂相含量大大减少.详细讨论了新型固相反应下产物的形成及其机理,并涉及SrRuO3杂相的存在对RuSr2(Gd,Ce)2Cu2O10产物电学性质的影响.结果表明,水蒸气的作用能抑制前驱物合成中SrRuO3杂相的形成,进而控制反应产物Ru-1222相中SrRuO3杂相的存在,而后者又有利于Ru-1222相超导电性的获得.     

紫外光固化阳离子复合胶粘剂的制备与表征

 以三芳基六氟磷酸硫鎓盐为引发剂,钛酸四异丙酯(TIP)为无机前驱体,3,4-环氧环己基甲基3,4-环氧环己基甲酸酯为单体,制备了含TiO2纳米结构的紫外光固化阳离子复合胶粘剂。通过原子力显微镜对复合胶粘剂形貌进行表征,研究了TIP含量对胶粘剂折射率和光透过率的影响。结果表明：TiO2无机相均匀地分散在胶粘剂的聚合物基体中,平均粒径约为20 nm;随着体系中TIP质量分数的变化,复合胶粘剂折射率为1.510 3~1.540 9可调;胶粘剂的光透过率随TIP质量分数增加略有减低,但当TIP含量高达40%时,光透过率维持在90%左右。     

ICP-OES测定人参不同生育期的11种金属

利用全谱直读电感耦合等离子体-发射光谱法(ICP-OES)测定了人参不同生育期(20、40、60、80、100、120d)Al、Co、Cr、Cu、Fe、Mg、Mn、Ni、Sn、V、Zn 11种金属含量.结果表明:人参体内Al、Fe、Mg、Mn、Zn等金属元素含量较高,微量元素Co、Cr、V等含量较少,Al、Cr含量在120d达到最高,Cu、Mg、Mn、Ni含量在40d达到最高,分别为10.13、1786.19、60.96、5.82μg/g;Co、Fe、Sn、V、Zn含量在100d最高,分别为0.31、380.73、8.49、0.72、50.98μg/g.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.