几何非线性混合应变元的构造及应用

本文基于由文献〔１〕导出的几何非线性混合应变元一般公式，构造了三个八节点六面体几何非线性混合应变元和Ｓｉｍｏ－Ｒｉｆａｉ的二维四边形线性应变元的几何非线性混合应变元。数值结果表明，所构造的二维及三维几何非线性混合应变元具有理想的性能。它们通过分片试验，且没有虚假剪切现象和不可压缩材料的自锁。同时，它们对歪扭网格不敏感，在利用粗疏网格离散时对线性和非线性（几何和材料）问题具有很高的精度。     

深梁理论的研究现状与工程应用

综述了深梁理论、截面剪切修正系数计算理论、深梁线性与几何非线性有限元、深梁材料非线性分析、深梁振动理论、深梁稳定理论、箱梁结构分析中弯曲、剪力滞、畸变分析时考虑剪切变形影响的计算理论、钢腹板桥梁考虑剪切变形的研究成果、弹性地基深梁、深梁理论在工程结构中的应用等. 提出了杆系结构的静力、振动和稳定分析方法都可用Timoshenko 深梁理论进行重建和重写.     

各向异性非线性强度条件下的边坡稳定性

解释了土体强度各向异性、非线性的物理本质,结合常规直剪试验、三轴试验结果,在前人工作基础上建立了边坡稳定性分析中强度各向异性、非线性的描述方法,其中特别提出了一个各向异性函数．基于Janbu普遍条分法(GPS),运用SPREADSHEET模板程序,提出了一个能将各向异性、非线性强度准则逐点等效到Mohr-Coulomb直线强度准则处理上的迭代方法,准确方便地获得了非线性强度下的边坡稳定性分析．最后的算例展示了方法的使用过程。     

纤维墙元模型在剪力墙结构非线性分析中的应用

钢筋混凝土剪力墙是目前高层与超高层建筑中最主要的抗侧力构件,本文在对已有的微观及宏观计算模型进行比较的基础上,基于纤维模型概念,建立了便于高层剪力墙结构非线性分析应用的纤维墙元模型,即由承受轴力及弯矩的纤维子单元与承受剪切变形的剪切子单元相合成的墙元计算模型;同时,对该模型中剪切子单元高度的取值进行了分析,明确了其物理含义;推导了单元的刚度矩阵,并分别建立了纤维子单元及剪切子单元的骨架曲线及滞回规则。另外,应用该计算单元模型,对一栋40层框架剪力墙结构进行了非线性时程分析,计算结果与相应模型的振动台试验结果进行了对比,比较结果表明两者在结构动力特性,位移响应方面等均吻合较好,验证了该计算单元模型的准确性与有效性,可为推广使用提供参考。     

Analytical modeling of sandwich beam for piezoelectric bender elements

Piezoelectric bender elements are widely used as electromechanical sensors and actuators.An analytical sandwich beam model for piezoelectric bender elements was developed based on the first-order shear deformation theory(FSDT),which assumes a single rotation angle for the whole cross-section and a quadratic distribution function for coupled electric potential in piezoelectric layers,and corrects the effect of transverse shear strain on the electric displacement integration.Free vibration analysis of simply- supported bender elements was carried out and the numerical results showed that,solu- tions of the present model for various thickness-to-length ratios are compared well with the exact two-dimensional solutions,which presents an efficient and accurate model for analyzing dynamic electromechanical responses of bender elements.     

复合材料面层夹层扁壳非线性精化理论及应用

考虑面层横向剪切变形以及横向剪应力在面层和芯层粘结处连续,应用Hamilton原理建立了正交铺设复合材料面层夹层扁壳新的非线性精化理论。在静力问题情形,控制方程和边界条件化简为用四个基本未知函数表述。作为理论的应用,分析了简支边界条件下正交铺设复合材料面层夹层圆柱壳和夹层球壳的非线性弯曲,得到了其挠度响应和层间应力响应。     

一种考虑初始缺陷影响的非线性梁单元

在目前广泛应用的梁单元中,尚缺乏全面考虑以下四种因素影响的粱单元：(1)轴力的影响;(2)剪切交形的影响;(3)初始弯曲的影响;(4)弯曲变形对轴向应变的影响,即弓形效应。事实上,以上四种非线性因素都会对钢框架结构的稳定和极限承载力有影响,需同时考虑。本文将致力于推导同时考虑以上四种因素影响的平面梁单元的平衡微分方程,最后得到精确的粱单元刚度矩阵,并研究以上四种因素对钢框架构件及钢框架结构的影响。     

The effect of shear deformation on the post-buckling behavior of imperfect nonlinear viscoelastic columns

Summary The post-buckling behavior of imperfect columns made of nonlinear viscoelastic materials is investigated, taking into account the effect of shear deformation. The material is modeled according to the Leaderman representation of nonlinear viscoelasticity. Solutions are developed, within the elastica and the shear deformation theories, in order to calculate the growth in time of the total deflection. The numerical results establish the importance of the shear and the nonlinear viscoelasticity effects, and of the h/ℓ ratio in the column post-buckling behavior. Accepted for publication 11 November 1996     

薄壁结构的平面纯剪单元

本文提出一种平面纯剪单元,它是由可变节点三角形与四边形平面应力等参元退化而成.它与三节点等参轴力杆单元组合时可以精确地模拟薄壁结构中杆与蒙皮之间的剪流作用.     

三维退化的壳理论和假定应变的壳单元

本文将Reissner-Mindlin板理论推广到空间曲壳结构,可称为Reissner-Mindlin型壳理论。从这种理论出发,可直接导出C(0)连续的壳体单元,即考虑横向剪切变型的影向的壳体单元,这种单元在国外已被广泛地采用,为克服这种单元在应用中所出现的剪切和膜的锁制现象同时又防止出现任何零能模式,作者提出了一种采用假定应变的新的壳单元公式,并对这种单元进行了广泛的数值试验,结果表明这种单元具有较高的精度和良好的性能。     

A microstructural investigation of the nonlinear response of electrorheological suspensions

In the preceding paper, Part 1, the transition from linear to nonlinear behavior for electrorheological (ER) suspensions under start-up of steady shear flow was found to first arise from the slight rearrangement of unstable structures. In this paper, we investigate the transition to nonlinear behavior for ER suspensions under oscillatory shear flow, focusing on the role of the rearrangement of unstable structures, and employing experimental and simulation results. Again, we find that nonlinear deformation first arises from these rearrangements, as opposed to the gross rearrangement or rupture of particulate chains. The Fourier transform of the simulated time-dependent shear stress is employed to quantify the dependence of the critical strain on the deformation frequency and electric field strength. The predicted behavior is consistent with experimental trends. Methods for verifying the predictions are discussed, as well as possible avenues for exploiting this information in improved operating strategies and improved ER fluids.     

Shear effects on large amplitude forced vibration of symmetrically laminated rectilinearly orthotropic circular plates

I.IntroductionPlatesandshells'consistingoflaminatedcompositematerialsareimportantstructuralmembersinmodernengineering.Thustheresearchfornonlinearproblemsoftheseplatesandshellshasbecomeincreasinglyimportantl'~II].Especially.therehasalreadybeensomeresearchworktlz--lslonthenonlinearproblemoflaminatedcircularplates.Buttheeffectsoftransversestiearonthenonlinearvibrationoftheplateshavenotbeeddiscussedbecauseofthedifficultyofnonlinearmathematics.However,itisexpectedthatthesheareffectsonlaminatedcom…     

An unsteady analysis of non-Newtonian blood flow through tapered arteries with a stenosis

The problem of non-Newtonian and nonlinear blood flow through a stenosed artery is solved numerically where the non-Newtonian rheology of the flowing blood is characterised by the generalised Power-law model. An improved shape of the time-variant stenosis present in the tapered arterial lumen is given mathematically in order to update resemblance to the in vivo situation. The vascular wall deformability is taken to be elastic (moving wall), however a comparison has been made with nonlinear visco-elastic wall motion. Finite difference scheme has been used to solve the unsteady nonlinear Navier-Stokes equations in cylindrical coordinates system governing flow assuming axial symmetry under laminar flow condition so that the problem effectively becomes two-dimensional. The present analytical treatment bears the potential to calculate the rate of flow, the resistive impedance and the wall shear stress with minor significance of computational complexity by exploiting the appropriate physically realistic prescribed conditions. The model is also employed to study the effects of the taper angle, wall deformation, severity of the stenosis within its fixed length, steeper stenosis of the same severity, nonlinearity and non-Newtonian rheology of the flowing blood on the flow field. An extensive quantitative analysis is performed through numerical computations of the desired quantities having physiological relevance through their graphical representations so as to validate the applicability of the present model.     

应变软化土体中柱形扩孔解析

给出子考虑剪胀作用的线性软化土体中柱形孔扩张的应力、位移场解析解;根据体积平衡方程导出极限护孔压力和最大塑性区半径的解析表达式,较好地弥补了经典理论的不足;计算讨论了土体软化和剪胀特性对柱形扩孔的影响。     

Nonlinear resonance responses of geometrically imperfect shear deformable nanobeams including surface stress effects

In this work, a thorough investigation is presented into the nonlinear resonant dynamics of geometrically imperfect shear deformable nanobeams subjected to harmonic external excitation force in the transverse direction. To this end, the Gurtin–Murdoch surface elasticity theory together with Reddy’s third-order shear deformation beam theory is utilized to take into account the size-dependent behavior of nanobeams and the effects of transverse shear deformation and rotary inertia, respectively. The kinematic nonlinearity is considered using the von Kármán kinematic hypothesis. The geometric imperfection as a slight curvature is assumed as the mode shape associated with the first vibration mode. The weak form of geometrically nonlinear governing equations of motion is derived using the variational differential quadrature (VDQ) technique and Lagrange equations. Then, a multistep numerical scheme is employed to solve the obtained governing equations in order to study the nonlinear frequency–response and force–response curves of nanobeams. Comprehensive studies into the effects of initial imperfection and boundary condition as well as geometric parameters on the nonlinear dynamic characteristics of imperfect shear deformable nanobeams are carried out through numerical results. Finally, the importance of incorporating the surface stress effects via the Gurtin–Murdoch elasticity theory, is emphasized by comparing the nonlinear dynamic responses of the nanobeams with different thicknesses.     

压缩剪切测试中载荷传递行为的数字光弹性研究

结合光弹性四步彩色相移法,提出改进的六步相移法来计算全场剪应力,对径压缩圆盘实验证实了该方法的正确性,并进一步研究了同质材料连接结构在压缩剪切测试中的层间剪切行为。实验结果表明:全场等色线条纹级数和剪应力连续分布且随载荷而增加;中线附近剪应力趋于零,而条纹级数为峰谷。在连接界面上的条纹级数和剪应力出现峰值,特别是在连接界面端部为最高,在最大载荷下可分别达3.5级和2.4MPa,是导致连接界面脱粘开裂的危险区域。连接结构通过层间剪应力进行应力传递,在连接界面上剪应力与外载基本保持平衡。     

A nonlinear composite beam theory

Presented here is a general theory for the three-dimensional nonlinear dynamics of elastic anisotropic initially straight beams undergoing moderate displacements and rotations. The theory fully accounts for geometric nonlinearities (large rotations and displacements) by using local stress and strain measures and an exact coordinate transformation, which result in nonlinear curvature and strain-displacement expressions that contain the von Karman strains as a special case. Extensionality is included in the formulation, and transverse shear deformations are accounted for by using a third-order theory. Six third-order nonlinear partial-differential equations are derived for describing one extension, two bending, one torsion, and two shearing vibrations of composite beams. They show that laminated beams display linear elastic and nonlinear geometric couplings among all motions. The theory contains, as special cases, the Euler-Bernoulli theory, Timoshenko's beam theory, the third-order shear theory, and the von Karman type nonlinear theory.     

Nonlinear shear behavior and interlaminar shear strength of unidirectional polymer matrix composites: A numerical study

Detailed finite element implementation is presented for a recently developed technique (He et al., 2012) to characterize nonlinear shear stress–strain response and interlaminar shear strength based on short-beam shear test of unidirectional polymeric composites. The material characterization couples iterative three-dimensional finite element modeling for stress calculation with digital image correlation for strain evaluation. Extensive numerical experiments were conducted to examine the dependence of the measured shear behavior on specimen and test configurations. The numerical results demonstrate that consistent results can be achieved for specimens with various span-to-thickness ratios, supporting the accurate material properties for the carbon/epoxy composite under study.     

The interaction between a plane shear layer and a slender body

The interaction of a plane shear layer with a thin flat plate located in the nonlinear region of the shear layer has been investigated experimentally. The shear layer's velocity ratio is 0.375, and its Reynolds number is ΔUθ₀/μ = 625. It is found that for different angles of attack of the plate, the mixing layer is deflected toward the slower stream. In addition, the plate attenuates turbulent fluctuations of the shear layer structures.     

一种确定均匀动脉壁面切应力的非线性方法

从Ling和Atabek提出的``局部流'理论出发，提出一种利用测量血液黏度、管轴上 的血流速度、压力和管径波形计算均匀动脉管壁切应力的非线性方法. 将这种方法与柳兆荣 等提出的利用测量血液黏度、管轴上的血流速度和平均管径计算切应力的线性方法比较，结 果表明，当管壁脉动幅度较小时，两种方法计算的压力梯度、流速剖面和管壁切应力差别较 小；而当管壁脉动幅度增大时，两种方法计算的压力梯度、流速剖面和管壁切应力差别增大. 对于小幅脉动均匀动脉，用线性方法计算管壁切应力有较高的精度；而对于大变形 均匀动脉，则需要考虑非线性因素对管壁切应力的影响. 由于作为输入量的血液黏度、轴心 血流速度、压力波形和管径波形可在活体上通过无损伤或微损伤的检测方法得到， 所提出的计算切应力的方法为在体或离体研究切应力与动脉重建的关系提供了方法学基础.