手性铝催化剂在不对称合成中的应用

综述了手性铝催化剂在不对称Diels-Alder、Michael加成、1, 3-偶极环加成、Ene反应、磷氢化、氰硅化、烯丙基化、氢化、Claisen重排、Friedel-Crafts烷基化、Aldol等反应中的应用.     

Mechanistic Study on the Ozone‐Mercury Reaction and the Effect of Water and Water Dimer Molecules

The thermodynamics and mechanism of the reaction of elemental mercury with ozone has been studied computationally. The effect of water and water dimer molecules on the reaction has also been investigated. For dry reaction, we obtained two pathways and geometry optimization, atoms in molecules analysis and vibrational frequencies of all component of reaction have been used for confirming of reaction mechanism. Thermodynamic variable of reaction has been calculated. For the reaction in the presence of the water, our studies focus on ozone‐mercury complex reaction with water and water dimer and obtained the mechanism of reactions. Comparison of wet and dry reaction shows the energy profile of reaction decreases with water molecule correspond to experimental prediction. Calculated thermodynamic variable of all reaction shows the Gibbs free energy of reaction decreases with the number of water molecule.     

The electrochemical reaction mechanism of selenocystine on selenium-gold film modified glassy carbon electrode

A simple and selective voltammetric method based on selenium-gold film modified glassy carbon electrode has been developed for investigating electrochemical reaction mechanism of selenocystine. With N₂ saturated, redox reactions between selenocystine (SeC) and selenocysteine (SeCys) were judged to be two simple electron-transfer processes. With air saturated, the reduction reaction was diagnosed to be EC catalytic reaction (the chemical oxidation reaction of the SeCys by O₂ (C) following the electron-transfer reaction (E)) and oxidation reaction is a simple electron-transfer process. With pure O₂ saturated, only reduction peak was observed and the reaction was judged to be EC catalytic reaction. The electron-transfer numbers of redox reaction were calculated to be 2 by chronocoulometry and rotating disk electrode.     

关于反应分子数定义的讨论

There are two different views on the definition of reaction molecularity in physical chemistry textbooks and related literatures so far. We give a deep discussion about this conception herein. Starting with the development of chemical kinetics and the definition of elementary reaction and state-state reaction, we clarify that elementary reaction and state-state reaction are the conceptions belonging to macro-and micro-systems, respectively, and reaction molecularity is also belonging to micro-conception. Based on this conclusion, we think that the more reasonable definition of reaction molecularity should be "the number of chemical particles that take part in a state-state reaction (or an elementary chemi-physical reaction) as a reactant".     

苯甲醛肟与炔丙醇偶极环加成反应的理论研究

用密度泛函理论(DFT)方法在B3LYP/6-31G*水平上研究了苯甲醛肟与炔丙醇加成反应的微观机制和热力学、动力学行为. 结果表明, 在苯甲醛肟与炔丙醇加成反应过程中, 8个可能反应通道的过渡态中均形成非平面五元环结构, 其中苯甲醛肟的Z、E构型特征得到了部分保留, 但主要部分的键长、键角均发生了变化, 电荷也进行了重新分布. 苯甲醛肟以羟基型参与反应的4个反应通道均为吸热反应和热力学非自发过程, 它们均具有较高的反应势垒、较慢的反应速率和较小的平衡常数; 而以离子型参与反应的四个反应通道均为放热反应和热力学自发过程, 它们的反应势垒较低, 反应速度较快, 平衡常数也较大, 故苯甲醛肟应主要以离子型参与反应. 炔丙醇的两种取向对应着加成反应的两种产物, 反应达到平衡后, 3-羟甲基二氢异噁唑为主要产物.     

The photo-dehydro-Diels-Alder (PDDA) reaction

The photo-dehydro-Diels-Alder (PDDA) reaction is a valuable extension of the classical Diels-Alder (DA) reaction. The PDDA reaction differs from the DA reaction by the replacement of one of the C-C-double bonds of the diene moiety by a C-C triple bond and by the photochemical triggering of the reaction. This entails that, in contrast to the DA reaction, the PDDA reaction proceeds according to a multistage mechanism with biradicals and cycloallenes as intermediates. The PDDA reaction provides access to a considerable variety of compound classes. For example, 1-phenylnaphthlenes, 1,1'-binaphthyls, N-heterocyclic biaryls, and naphthalenophanes could be obtained by this reaction.     

Effect of stoichiometry and diffusion on an epoxy/amine reaction mechanism

The bulk phase kinetics of an epoxy (DGEBA) /amine (DDS) thermoset have been studied using DSC, FTIR, and ¹³C-NMR. In the absence of catalyst, the reaction was found to involve a main exothermic reaction between epoxide and amine hydrogen and a side reaction between tertiary amine formed in the main reaction and epoxide. The main reaction was exothermic while the side reaction had no discernable exotherm. Etherification did not occur to any significant extent. Since only the main reaction is exothermic, DSC was very useful for studying the main reaction kinetics. FTIR was used for determining whether epoxide and amine hydrogen were consumed at different rates as a way of following the side reaction. An IR band previously unused by other investigators was used to monitor the amine hydrogen concentration. NMR confirmed the above mechanism by identifying the formation of a quaternary ammonium ion/alkoxide ion pair as a reaction product of tertiary amine and epoxide. This mechanism has been successfully fit to a rate law valid over the entire extent of reaction. The rate constant for the epoxy/amine addition reaction was found to depend on hydroxide concentration (extent), reaction temperature, and glass transition temperature and included contributions from uncatalyzed and autocatalyzed parts. The side reaction (quaternary ammonium ion formation) formed weak bonds which did not affect the overall system T_g. Both reactions were second order. The rate constants for the main reaction first increase with increasing extent due to autocatalysis by hydroxide before decreasing due to the diffusion limit caused by gelation and vitrification. © 1995 John Wiley & Sons, Inc.     

Study on the reaction kinetics between PBT and epoxy by a novel rheological method

In the present study, the reaction kinetics of polybutylene terephthalate (PBT) and epoxy system was studied by a novel rheological method. The reaction process was determined by rheological test and the results showed that there were three stages in the reaction between PBT and epoxy, which were reaction-controlling stage (stage I), reaction-stagnation stage (stage II) and diffusion-controlling stage (stage III). In addition, the stage I was selected to study the reaction kinetics by the rheological method. The results showed that the reaction between PBT and epoxy could be classified as a pseudo-first-order reaction due to the excessive amount of epoxy group. Furthermore, the reaction apparent activation energy of the stage I determined by the rheological method was 143 kJ/mol. To confirm these results, the reaction kinetics was also evaluated by the endgroup determination method, and the results showed that the reaction could also be classified as a pseudo-first-order reaction. Moreover, the apparent activation energy of the reaction was 116 kJ/mol, which was similar to that of the value obtained by the rheological method.     

甘氨酸螯合钙的合成与性能研究

以甘氨酸和金属钙盐为原料,采用水体系合成法制备甘氨酸钙螯合物,探讨不同反应温度、反应时问、反应体系pH等对产品产率的影响,从而确定反应的最佳条件,并对甘氨酸钙螯合物采用傅里叶红外光谱FT-IR进行表征。实验结果表明,合成甘氨酸钙螯合物的最适反应条件是,反应体系pH为5～6,反应时间为2～3h,反应温度为70～80℃。     

Direct Dynamics Simulation of Reaction Between F2 and Ethylene

Direct dynamics within the framework of DFT was used to study the long-time puzzling mechanism of the reaction between F2 and ethylene. Three types of reactions are widely accepted : F atom elimination reaction, HF elimination reaction and the addition reaction. Several reaction mechanisms have been proposed, but only the radical mechanism can reasonably explain the initial reaction at low temperature. In this article, our calculations support the radical mechanism and the reaction mechanisms of the three reactions, and they are described in detail by trajectory simulation. The reactions in a cryogenic matrix with the reaction mechanism were also discussed.     

Influence of temperature on metal-organic frameworks

Reaction temperature is one of the key parameters in the synthesis of metal-organic frameworks （MOFs）. Though there is no convergence with regard to the various experimental parameters, reaction temperature has been found to have remarkable influence on the formation and structure of MOFs, especially toward the control of topology and dimensionality of the MOF structures. Theoretically, the reaction temperature affects directly the reaction energy barrier in reaction thermodynamics and the reaction rate in the reaction kinetics. This review aims to show the influence of reaction temperature on crystal growth/assembly, structural modulation and transformation of MOFs, and to provide primary information and insights into the design and assernblv of desired MOFs.     

酸催化三聚甲醛与甲酸甲酯偶联反应过程的分析

以硫酸为催化剂,研究了三聚甲醛与甲酸甲酯偶联合成乙醇酸甲酯和甲氧基乙酸甲酯的反应中,催化剂浓度、原料配比、反应温度、反应时间等条件对反应过程的影响,通过对产物收率和系统压力变化的分析,并结合与其它不同酸强度催化剂的对比,得到甲醛的活化是偶联反应的速率控制步骤,催化剂的酸强度决定其对甲醛的活化能力,是影响偶联反应的主要因素.     

Stoichiometric Photochemical Carbene Transfer by Bamford–Stevens Reaction

The photolysis of diazoalkanes is a timely strategy to conduct carbene-transfer reactions under mild and metal-free reaction conditions, and has developed as an important alternative to conventional metal-catalyzed carbene-transfer reactions. One of the major limitations lies within the rapidly occurring side reaction of the carbene intermediate with remaining diazoalkane molecules that result in the use of an excess of the reaction partner and thus impacts on the reaction efficiency. Herein, we describe a protocol that takes advantage of the in situ generation of donor–acceptor diazoalkanes by Bamford–Stevens reaction. Following this strategy, the concentration of the diazoalkane reaction partner can be minimized to reduce unwanted side reactions and to now conduct photochemical carbene transfer reactions under stoichiometric reaction conditions. We have explored this approach in the C−H and N−H functionalization and cyclopropanation reaction of N-heterocycles and could demonstrate the applicability of this method in 51 examples.     

Reaction path synthesis methodology for waste minimization

Being the core of whole process, a chemical process is a key step for reducing waste generation. Therefore, to organize a reasonable reaction path is very important for reducing waste emission. Because of the large amount of the feasible reaction path and other factors in a chemical reaction system, the opti-mizing for reaction path is difficult. Since the reaction path synthesis problem has presented, lots of re-searchers focused on it. At the beginning, only chem-ists took the research work,…     

反应类等键反应方法及类反应热动力学参数计算

本文提出了反应类等键反应方法,将通常用于热力学性质计算的等键反应方法推广用于类反应中反应势垒和反应焓变的计算. 对碳氢燃料低温燃烧反应机理中的一类重要反应类：?烷基自由基过氧化氢裂解生成烯烃和HO2自由基的反应势垒和反应焓变进行了计算. 通过对该类16个反应中的5个代表反应分别在不同计算水平HF、DFT、MP2、CCSD(T)的比较计算发现,采用等键反应方法可在较低从头算级别计算得到类反应较高精度的反应势垒,提高了计算的效率和精度. 本文采用反应类等键反应方法在B3LYP/6-311G(d,p)计算水平对该类16个反应进行了反应势垒和反应焓变的计算,并建立了反应势垒和反应能的线性自由能关系：delta V=71.02+0.41?delta E.     

Understanding the physics and chemistry of reaction mechanisms from atomic contributions: a reaction force perspective

Studying chemical reactions involves the knowledge of the reaction mechanism. Despite activation barriers describing the kinetics or reaction energies reflecting thermodynamic aspects, identifying the underlying physics and chemistry along the reaction path contributes essentially to the overall understanding of reaction mechanisms, especially for catalysis. In the past years the reaction force has evolved as a valuable tool to discern between structural changes and electrons' rearrangement in chemical reactions. It provides a framework to analyze chemical reactions and additionally a rational partition of activation and reaction energies. Here, we propose to separate these energies further in atomic contributions, which will shed new insights in the underlying reaction mechanism. As first case studies we analyze two intramolecular proton transfer reactions. Despite the atom based separation of activation barriers and reaction energies, we also assign the participation of each atom in structural changes or electrons' rearrangement along the intrinsic reaction coordinate. These participations allow us to identify the role of each atom in the two reactions and therfore the underlying chemistry. The knowledge of the reaction chemistry immediately leads us to suggest replacements with other atom types that would facilitate certain processes in the reaction. The characterization of the contribution of each atom to the reaction energetics, additionally, identifies the reactive center of a molecular system that unites the main atoms contributing to the potential energy change along the reaction path.     

Baylis-Hillman反应的研究进展

介绍子一种形成碳碳键的方法－Baylis-Hillman反应及其研究的最新进展。为克服常见Baylis-Hillman反应反应速度慢的缺点,近来人们发展了许多加快反应速度的方法。运用手性底物或手性催化剂等方法来进行不对称Baylis-Hillman反应从而获得手性Baylis-Hillman加成产物。     

负载型Heck反应催化剂的研究进展

Heck反应是一类重要的C-C偶联反应,传统的均相Heck反应催化剂存在分离和回收困难等问题;近年来负载型Heck反应催化剂的研究引起了人们的广泛关注.本文综述了钯基和非钯基负载型Heck反应催化剂的研究进展,评述了不同载体上催化活性组分对Heck反应的特点,并展望了其发展趋势.     

三苯基环戊二烯扩环反应研究

研究在高氯酸银作用下,三苯基环戊二烯扩环氧化生成三苯基取代吡喃盐的反应,并初步探讨了反应机理     

Kinetics of Reaction of Bromo-epoxy Resin with Oleic Acid catalyzed by Dimethyl benzyl amine

The kinetics of reaction of bromo-epoxy resin with oleic acid in the presence of dimethylbenzylamine catalyst was studied. The reaction is a zero order reaction with respect to oleic acid, first order with respect to epoxy group and 0. 74 order with respect to dimethylbenzylamine. The reaction rate constants at various temperatures and activation energy were determined. The mechanism of this reaction was discussed. Keywords Tetrabromobisphenol-A, Bromo-epoxy resin, Oleic acid kinetics, Reaction mechanism