光学相干层析图像层状结构的增强与定量测量

光学相干层析(OCT)成像技术对于眼底等层状组织的定量测量有赖于光学相干层析图像中层状结构的提取。为了对原始光学相干层析图像进行预处理以有效地去除图像中的噪声及散斑、增强图中的层状结构,并更好地保护图像中的层状结构,进而更准确地定量测量图像中有重要意义的层状结构的光程信息,提出在相干增强各向异性扩散(CED)算法中引入二阶导数项以控制沿相干方向的扩散强度,并将引入二阶导数项的相干增强各向异性扩散算法应用于不同样品的光学相干层析图像。结合在预处理后图像中层状结构位置的查找结果与样品的折射率信息,实现了对光学相干层析图像中有重要意义的层状结构厚度的定量测量。实验结果表明,使用引入二阶导数项的相干增强各向异性扩散算法对光学相干层析图像预处理有利于对图中重要层状结构的更准确测量。     

白光频域光学相干层析检测方法

针对频域光学相干层析系统成像过程中产生的图像噪声,提出了一种干涉光谱解耦的方法。该方法通过消除干涉光谱中的直流项和自相关项,实现对图像去噪。利用白光作为光源,对聚苯乙烯单层薄膜进行成像实验,得到薄膜的一维深度图像以及二维层析图像。由二维层析图像可以清晰的获取薄膜的内部微观结构及表面形貌信息。实验结果表明,该检测方法可有效消除薄膜的图像噪声,提高图像信噪比和对比度。     

光学相干层析成像的图像重建

层析成像技术－光学相干层析术是基于光学低相干反射测量发展而来的。介绍了用图像恢复的基本原理在光学相干层析术图像增强方面的工作。通过实验测量行到了解卷积所必需的点扩展函数。重建后的膜层结构图像的深度分辨率提高了一个数量级,图像也取得了了的锐化、去噪的效果。     

光学相干层析成像系统的实验研究

介绍了作者研究建立的光学相干层析（ＯＣＴ）成像系统,给出了利用该系统得以的实际生物样品光学相干层析图像,并对系统性能和结果作了分析,讨论了影响系统性能的一些因素及改进方法。     

基于光学相干测振系统的微悬臂梁缺陷检测

提出了基于光学相干测振（optical coherence vibrometer, OCV）系统的微悬臂梁缺陷检测方法。自搭建的OCV系统最大振动位移量程、最大振动频率分别为2.574 mm和138.5 kHz,应用该系统对含缺陷微悬臂梁-附加质量块耦合结构进行振动测量获得其固有频率,并利用附加质量块对固有频率的影响特性实现了对缺陷的定位。在对系统采集到的干涉光谱信号处理的过程中,采用FFT（fast Fourier transform, FFT）+ FT（Fourier transform, FT）细化频谱校正算法进行误差校正,精度可提高1 000倍以上,使系统实现纳米量级的位移测量。实验结果表明,该方法能够有效识别微悬臂梁的缺陷位置,为微小型结构的缺陷检测提供了一种新的方法,同时拓展了光学相干测振技术在工程结构无损检测的应用。     

氧对于在Ar/O氛围下用近空间升华法制备的CdS薄膜的影响

采用近空间升华法（CSS）在氩/氧气氛中制备了硫化镉（CdS）多晶薄膜.利用XRD,XPS,AFM,UV-VIS光谱和四探针技术等测试和分析手段系统研究了氧对薄膜的成分、结构、光学和电学等性质的影响.结果表明,用近空间升华法制备的CdS薄膜具有六方相结构,膜层致密、均匀,平均晶粒大小约为40 nm,富硫.氧掺入后部分与镉生成氧化镉,并随着氧含量的增加,薄膜的成分有趋于化学计量比的趋势,光学带隙加宽,光暗电导比增加.此外,还利用扫描电镜（SEM）观察了CdS/CdTe断面结合光谱响应（QE）的结果讨论了氧对CdS/CdTe界面互扩散的影响.发现,随着CdS薄膜制备气氛中氧分压的升高,CdS/CdTe界面的互扩散程度降低,有利于提高器件在500—600 nm波长范围内的光谱响应.认为,氧含量的增加不但使CdS薄膜在光伏应用方面的质量得到改善,而且CdTe太阳电池器件中的CdS/CdTe界面也得到了优化. 关键词： CdS多晶薄膜 近空间升华法 窗口层 界面     

铜铟镓硒太阳能电池多层膜的结构分析

对于溅射后硒化和共蒸发等方法制备的铜铟镓硒（CIGS）太阳能电池薄膜,利用多种分析方法研究了CIGS多层膜的复杂结构等．研究表明：卢瑟福背散射（RBS）在分析CIGS多层膜方面具有其独特优势和可靠的结果;溅射后硒化方法制备的CIGS薄膜中,Ga和In在CIGS薄膜中呈梯度分布,这种Ga表层少而内层多的不均匀分布与Mo层没有必然关系;RBS和俄歇电子能谱分析（AES）均显示CIGS太阳能电池器件多层膜界面处存在扩散,尤其是CdS与CIGS,Mo与CIGS的界面处;X射线荧光（XRF）结果表明,电池效率最高的CIGS层中In,Ga比例为In：Ga=0．7：0.3;X射线衍射（XRD）结果显示：退火后的CIGS／Mo薄膜结晶品质得到了优化．     

层状粘接结构超声检测信号的同态解卷积脱粘界面定征

本文利用建立的多层粘接结构超声无损检测信号的卷积模型,推导出了检测信号的解析表达式,并用同态滤波解卷积方法有效地提取出粘接结构的系统响应,进而由其中界面多次反射响应的位置、幅度和包络等特征参数,实现了脱粘二界面（指空气脱粘）的定征和识别。仿真和实验数据的处理结果表明本文方法对脱粘检测的应用有积极的意义。     

谱域光学相干层析系统中基于解卷积方法的像质优化

谱域光学相干层析（spectral domain optical coherence tomography, 简记为SD-OCT）系统的轴向点扩散函数（point spread function, 简记为PSF）并不具备空不变特性,无法直接应用于解卷积运算.为实现SD-OCT系统成像质量基于解卷积算法的优化,本文采用数值校正后的轴向扫描信号和轴向有效PSF来实施基于Lucy-Richardson算法的解卷积运算,进而实现了SD-OCT系统中图像质量尤其是轴向分辨率的改善.本文理论分析了SD-OCT系统中导致轴向有效PSF随成像深度增大而下降和图像模糊的因素,阐述了利用解卷积算法实现图像质量优化的过程,基于建立的SD-OCT系统实施了不同成像深度位置处PSF的标定,并利用离散轴向位置处PSF的峰值拟合了轴向有效PSF的调制函数.利用调制函数对所有轴向扫描信号进行数值校正,然后根据轴向有效PSF进行解卷积算法.典型样品的解卷积图像重建结果表明,提出的解卷积方法能有效提高系统的轴向分辨率,同时有效抑制系统灵敏度随成像深度增大而下降的趋势. 关键词： 谱域光学相干层析 Lucy-Richardson解卷积 有效点扩散函数     

国外点滴

<正> 一、利用非相干光学处理层析X-射线摄影的横截面的影象本专利描述了一种非时间相干的、多光谱的光学处理机。该处理机是从层析X-射线照片的背面投射过来的透射光线来实现影象再现,其透过率是取决于所使用的比例尺不变的     

基于受激辐射信号的谱域光学相干层析分子成像方法

鉴于不同生理病理状态下组织复折射率实部的变化不大,传统光学相干层析(OCT)成像技术在分子特异性识别上存在先天不足.为此,本文提出了基于受激辐射信号的OCT成像方法,可在实现传统散射成像的同时,实现基于受激辐射信号的分子成像.在超高分辨率谱域OCT系统的基础上,通过增设光谱分光与调制抽运光支路,建立了基于单宽谱光源的抽运探测谱域OCT系统,详细推导了调制抽运下受激辐射信号的获取与成像公式.利用搭建的抽运探测谱域OCT系统,实现了瞬态受激辐射信号的相干探测.基于同时获取的受激辐射OCT信号和传统OCT信号,成功重构了氮化物粉末构建样品的基于受激辐射信号的分子对比OCT图像.     

聚吡咯修饰的金纳米棒对肿瘤的光学相干层析成像的影响

聚吡咯(PPy)制备简单、生物相容性好,且在近红外(NIR)光谱范围内有很强的吸收,可作为一种良好的光热治疗试剂;同时,其NIR光吸收性质也可用于增强光学相干层析成像(OCT)的对比效果。因此,采用PPy对传统的OCT对比试剂——金纳米棒(GNR)进行表面修饰,有望获得对比效果更好且生物毒性较小的新型OCT对比试剂。选用吡咯为起始原料,在GNR表面进行一步简单的氧化聚合反应即可制备得到PPy修饰的金纳米棒(GNR-PPy)。利用紫外-可见吸收光谱,拉曼光谱和透射电子显微镜对制备的样品进行了分析和表征。构建小鼠荷瘤模型,以研究GNR-PPy对肿瘤OCT图像对比度的增强效果。采用中心波长为840 nm的OCT系统对注射了纳米粒子的肿瘤区域进行OCT成像。结果表明,肿瘤组织注射了GNR-PPy后,OCT信号衰减非常明显;与注射了GNR的OCT图像相比,840 nm光在GNR-PPy的OCT图像中的穿透深度明显更低。从OCT图像中抽提出一维的衰减曲线对OCT图像进行定量分析,发现注射有GNR-PPy肿瘤组织的OCT信号衰减系数明显高于注射了GNR的组织。表明,相对于GNR,GNR-PPy具有更好的OCT信号对比效果,这在增强肿瘤成像效果方面具有潜在应用价值。     

Statistics and reduction of speckle in optical coherence tomography

Studies have shown that optical coherence tomography (OCT) is useful in imaging microscopic structures through highly scattering media. Because spatially coherent light is used in OCT, speckle in the reconstructed image is unavoidable, resulting in degradation of the quality of the OCT images and impaired ability to differentiate subsurface structures. Therefore speckle reduction is an important issue in OCT imaging. We develop speckle statistics that are appropriate to the OCT measurements and demonstrate a simple and practical speckle-reduction technique.     

光学相干断层扫描成像新技术OCT

光学相干层析成像技术（optical coherence tomography,简称OCT）是一种新型成像方法,在生物医学和材料等许多领域有广泛的应用。本文介绍了OCT的基本原理,并给出了用该装置对生物组织样品的成像结果。此外还用计算机图像处理的方法,使得图像分辨率得到了进一步提高。     

Polarisation-sensitive optical coherence tomography for material characterisation and strain-field mapping

Optical coherence tomography (OCT) is a relatively new imaging technique capable of recording cross-sectional images of transparent and turbid structures with micrometer-scale resolution. Originally developed for biomedical imaging applications, this technique also has a great potential for non-destructive material characterisation and testing. Polarisation-sensitive (PS) OCT is a recent extension of classical OCT that measures and images birefringence properties of a sample, which, however, has not yet been applied to materials science. We present imaging of glass-fibre-enforced epoxy resin compounds and the detection of dry spots, where the epoxy did not properly penetrate the glass-fibre structure. Furthermore, we demonstrate PS-OCT imaging of the birefringence properties of different materials. The mapping of strain fields of samples under uniaxial and non-uniform external stress and the detection of flow patterns in injection-moulded plastic parts could be demonstrated with this technique for the first time. Received: 21 October 2002 / Accepted: 22 November 2002 / Published online: 29 January 2003 RID="*" ID="*"Corresponding author. Fax: +43-732/9015-5618, E-mail: david.stifter@uar.at     

Electrostatic micromachine scanning mirror for optical coherence tomography

Compact electrostatic micromirror structures for use in the scanning arm of an optical coherence tomography (OCT) system are described. These devices consist of millimeter-scale mirrors resting upon micrometer-scale polyimide hinges that are tilted by a linear micromachine actuator, the integrated force array (IFA). The IFA is a network of deformable capacitor cells that electrostatically contract with an applied voltage. The support structures, hinges, and actuators are fabricated by photolithography from polyimide-upon-silicon wafers. These devices were inserted into the scanning arm of an experimental OCT imaging system to produce in vitro and in vivo images at frame rates of 4 to 8 Hz.     

Simultaneous imaging and measurement of tensile stress on cornea by using a common-path optical coherence tomography system with an external contact reference

The objective of this study is to demonstrate that tensile stress resulting due to applied force on cornea can be accurately measured by using a time-domain common-path optical coherence tomography (OCT) system with an external contact reference. The unique design of the common-path OCT is utilized to set up an imaging system in which a chicken eye is placed adjacent to a glass plate serving as the external reference plane for the imaging system. As the force is applied to the chicken eye, it presses against the reference glass plate. The modified OCT image obtained is used to calculate the size of contact area, which is then used to derive the tensile stress on the cornea. The drop in signal levels upon contact of reference glass plate with the tissue are extremely sharp because of the sharp decline in reference power levels itself, thus providing us with an accurate measurement of contact area. The experimental results were in good agreement with the numerical predictions. The results of this study might be useful in providing new insights and ideas to improve the precision and safety of currently used ophthalmic surgical techniques. This research outlines a method which could be used to provide high resolution OCT images and a precise feedback of the forces applied to the cornea simultaneously.     

Extraction of optical scattering parameters and attenuation compensation in optical coherence tomography images of multilayered tissue structures

A recently developed analytical optical coherence tomography (OCT) model [Thrane et al., J. Opt. Soc. Am. A 17, 484 (2000)] allows the extraction of optical scattering parameters from OCT images, thereby permitting attenuation compensation in those images. By expanding this theoretical model, we have developed a new method for extracting optical scattering parameters from multilayered tissue structures in vivo. To verify this, we used a Monte Carlo (MC) OCT model as a numerical phantom to simulate the OCT signal for heterogeneous multilayered tissue. Excellent agreement between the extracted values of the optical scattering properties of the different layers and the corresponding input reference values of the MC simulation was obtained, which demonstrates the feasibility of the method for in vivo applications. This is to our knowledge the first time such verification has been obtained, and the results hold promise for expanding the functional imaging capabilities of OCT.     

OCT技术在发育生物学中的应用

基于光学低相干反射测量而发展起来的光学相干层析技术（ Optica1 Coherence Tomography,OCT）是一种新型的成像技术，它可以对强散射介质如生物组织实施非侵入性的快速活体成像。与传统的组织切片相比,OTC可以大大减少对发育形态成像所需的时间、复杂程度及成本。非接触和非侵入式的成像方式有助于研究个体发育中由基因变异所引起的形态和功能变化，因而在发育生物学的研究当中有着广阔的应用前景。概述了OCT技术在发育生物学当中诸方面的应用情况。